The BMW M6 Is ALIVE !!! (Project Indy)

Рет қаралды 5,462

Жыл бұрын

In this video i start my BMW M6 after installing new rod bearings, rod bolts and vanos pump, thanks to Dr Vanos for supporting the channel with the vanos pump and oil line drvanos.com/

Пікірлер: 25

@benirving3807 Жыл бұрын

New vanos gears require no clearance. There is a coating on them that wears off to leave the correct coating. This make assembly easy for the factory. You will now have twice the necessary clearance.

@PastorDavidFranklin Жыл бұрын

Great work Nathan! Always enjoy seeing you noodle through the issues and the fixes!

@GeorgeAusters Жыл бұрын

You should do a secondary air injection pump delete and get all that out of the way.. Just did it on my 760Li

@RickCT2000 Жыл бұрын

It’s like air traffic control with all those cars waiting to take off. Great video. So much good info.

@rstevep9413 Жыл бұрын

great show thinks

@testosteronba Жыл бұрын

Very soon you'll need warehouse for all those car 😅 can't wait to see that m6 on the road again!

@tech42long35 Жыл бұрын

Awsm! really cool car. liked the whole thing. great vid.

@DuaneMoore Жыл бұрын

Love the phone vids Right up my alley ;)

@GeorgeAusters Жыл бұрын

You can use cable ties to keep the gasket in place while installing the pan

@LoopsRonin Жыл бұрын

After watching all these vids I know one thing..... F BMWs from this generation

@jimmynickelz Жыл бұрын

Don't forget the tail light gaskets. Trust me...and clear out the drains.

@jeffleach2668 Жыл бұрын

Just changed my aluminum oil pans gasket on my ‘06 Ford Freestyle. The torque pattern was start at one bolt and just go around from there instead of the usual criss cross pattern. Thought that was quite an odd torque sequence.

@I.Odnamra Жыл бұрын

Very nice. So when can I expect delivery?

@tbirdboy Жыл бұрын

Bring your sister back Nate. She is a cutie. Bump up your numbers for sure.

@ivailovelikov5224 Жыл бұрын

Hi Nathan, you do not prime oil to the engine in any way before straight up starting it? I'm into this job now and I was thinking to crank the engine a bit without spark plugs in

@bcas357 Жыл бұрын

Lmk if you want to work on E60 M5.... rod bearings, vanos solenoids and fuel filter needs changing? I would love to work with you! I'm in Chicago

@sheepdogtactical1430 Жыл бұрын

Question, I'm pulling my hair out with my 04 325i e46. Replaced All speedsensors with Bosch. Using my Foxwell NT510 Front wheels are Not showing any movement 0 but rears are functioning good. Also no speedo and Tri-fecta lights limp mode. Even looked at the 2 abs Pressure sensors and both functioning and steering angle sensors reads normal on live. I have DSC, Red Brake, ABS lights on. And ideas??? Thx

@LeverPhile Жыл бұрын

You should have codes ... scan the instrument cluster and the DSC unit. Btw, the speedo reads off the left rear wheel speed sensor (one of the rears, pretty sure its the left), so the issue is likely in a control module or perhaps wiring.

@Lester.M Жыл бұрын

Looking forward to the rebirth! Hey Nate, what model of OBD scanner do you use for your Porsche jobs? Thank you sir! P.S. I’m still using the BMW scanner (Creator 310) you recommended and it works perfectly, thank you.

@NathansBMWWorkshop Жыл бұрын

That wont work for porsche though

@Lester.M Жыл бұрын

@@NathansBMWWorkshop Yes sir, it’s working on my 135i (and I appreciate the recommendation) but I need something for my Porsche Macan. Is there a specific scanner you recommend for Porsche products? Sorry about the confusion.

@LuisMartinez-ry2qr Жыл бұрын

Nathan ! This a completely different topic but I have a e39 528i auto trans. It should work in a e36 m52 or e38 m52 right ?? Please get back to me thanks