The breakup of the final part of the 737 Dual seat sim.

Рет қаралды 7,594

Жыл бұрын

7 years in the making and 2 hours to disassemble.
A massive Thank You to Sebi Woelke for the Intro and Logo!
If you would like to help support the channel and the build, our Patreon link can be found here:
PATREON
/ 737diysim
WEBSITE:
www.737diysim.com
Facebook: Boeing738v2
Instagram: 737DIYSIM

Пікірлер: 62

@dondykeman1140 Жыл бұрын

Breaks my heart as well, knowing how many hours went into creating it… but the next one is going to be so much better! Looking forward to following the journey!!

@helimech8152 Жыл бұрын

Thanks Don. In the end, i needed to get rid of this to get over this hurdle in my mind. Now its moving on bigger and better (I Hope!) Let the Journey begin!

@CaptainBobSim Жыл бұрын

It's always such an emotional moment taking apart something you've worked so hard on, but I'm excited to see how you do it next!

@VLOGS-skyun Жыл бұрын

@helimech8152 Жыл бұрын

Hello & Cheers!

@kickoff3312 Жыл бұрын

Well, at the end, you can reuse the... wood ! It seems ok and quite exotic

@rob57898 Жыл бұрын

I've followed your journey this past few years, and it pains me to see the end of this. I've just bought the plans to build my own. however I am excited to see the next version, knowing its going to be top quality!

@helimech8152 Жыл бұрын

Hello Rob, been making parts all week, and I am super happy with them. The plan is coming together!

@dennislander2079 Жыл бұрын

ha demolision the old 737 mip , But great news soon the new mip . One thing i make one .

@helimech8152 Жыл бұрын

Hi Dennis, The new design is well under way! I have the new annunicators sat infront of me right now. It should be epic, I know you have waited a while for this next build. It's coming!

@guntervandeun2510 Жыл бұрын

So much faster to disassemble than to assemble....

@helimech8152 Жыл бұрын

Hi Gunter, Alwasy the way, Mind you i have been picking up screws from the floor for days now!

@guntervandeun2510 Жыл бұрын

@@helimech8152 😅

@krispex1974 Жыл бұрын

Thank you for all that you do for the flight sim community. I am inspired to make the leap and build a single cockpit sim (due to space constraints) and eagerly waiting to see how this progresses. So next purchases are going to be 3d printer(s) and maybe a small desktop cnc

@helimech8152 Жыл бұрын

A 3d printer is going to be a huge benefit when sim building, A CNC is also a good start, but you might be better off with a K40 laser machine instead.

@krispex1974 Жыл бұрын

@@helimech8152 thank you, hadn’t thought of that so that’s great 😃

@miketango507 Жыл бұрын

great Video . cheers Karl!

@helimech8152 Жыл бұрын

Thanks Dude!

@mick-tf7xj Жыл бұрын

Well thanks and great to see you back on the 737 Karl that was another great but in a way ….sad video but looking forward to the next chapters to follow on I know will be great as I will also soon be rebuilding my 737 when I get to my new home !

@sky173 Жыл бұрын

Another great video. I hope you really go into great detail on how you go about creating the next one. I'm to the point of seriously considering a nice home cockpit, but I've got no idea where to start. Looking forward to the next videos. Thanks for sharing.

@helimech8152 Жыл бұрын

Hello, and yes. Im trying to make it as simple as possible to follow along and create the new sim.

@steffgrunwald8881 Жыл бұрын

Can't wait to see the new MIP panel with everything you've learned since doing this one. It will be easier with better materials handy in the UK. keep up the great work Karl!!

@helimech8152 Жыл бұрын

Thank you, I think the parts I have created already in the background are a massive step up. It will soon be time to put them all together.

@388thalpha Жыл бұрын

Love the video, Thank you for making it now I can play it backwards to see how to put it all together ❤️

@helimech8152 Жыл бұрын

Haha, that made me chuckle. I did have big plans for the cockpit, but now its time to put that in the past and start over!

@SteveMorrisTCS Жыл бұрын

Very sad to take that apart as a full sim is what we all would like. That said really looking forward to new single seat as this will be more suited to me even though I have your full sim plans just in case one day I have the space and time to build. Great job as always Karl keep up the good work.

@helimech8152 Жыл бұрын

Hi Steve, and thanks. Looking forward to this new build now! Smaller and hopefully interchangeable with my current sim.

@Nebulorum Жыл бұрын

Always impressed with these diy sims. Since you are working with PCB I wonder if something like canbus and reduce wiring looms makes sense. Not sure about the programming.

@naifshaukat995 Жыл бұрын

Please do the full i mean both sides

@sundar999 Жыл бұрын

You made even a disassembly look interesting.😉 I know, when you've almost finished a build you see how you could have made things much better in the process!

@wingnutta Жыл бұрын

Super stoked for the new version. Im looking to move abroad and i will have the room to hopefully do a home build - its a dream eh. Really looking forward to seeing if you can reduce the amount of wires at the back - good luck with that lol... Will be watching for sure.

@helimech8152 Жыл бұрын

Hi Adam, Great to hear you might give it a go! as for reducing the wire count, that's not likely as the first item I created requires a lot more wiring already!

@hydrolisk1792 Жыл бұрын

sad day right here... But like a phoenix, she will rise from the ashes!!

@helimech8152 Жыл бұрын

Hello! Thats the plan!

@Utube2Itube Жыл бұрын

You have so many projects in the loop. Will you continue the Cessna 172 panel project as well? That one looked great for casual to semi dedicated simers 😊

@rbaker73 Жыл бұрын

Always very impressive work, love the builds. One request, can you build an Airbus A320 lol

@helimech8152 Жыл бұрын

Hello, I try to stay away from the A320. There are so many builders out there with good stuff already!

@rbaker73 Жыл бұрын

@@helimech8152 thanks for info, keep up good work, cheers

@AndrewButler-po1dr Жыл бұрын

I look forward to seeing your new single seater build. Try not to make the MIP too different as I have just finished mine and suspect, when I see your new one, ill want to re-build mine!!

@OffiicialSteff Жыл бұрын

i absolutely love these vids, and ive bought myself a 737MIP simpanels.. thing is i got no idea how to wire it into an arduino.. i dont know anything about it, so if you were to make something new, id really apreciate it if you went into detail about wireing (ground, + and - etc)

@helimech8152 Жыл бұрын

Hello, There are many videos of how i wired this up in the past, but I will show all this on the new build as many more people are starting out and hopefully, my videos are getting a little better.

@StigBSivertsen Жыл бұрын

What gauge wire do you normally use?

@leo_bysse4004 Жыл бұрын

A fantastic video once again👏

@helimech8152 Жыл бұрын

Thank you! Probably a bit boring for those that want to create, but i wanted to blog the end of what i thought was an awesome cockpit!

@leo_bysse4004 Жыл бұрын

@@helimech8152 It was indeed an awesome home cockpit! it even inspired me to build my own single seat home cockpit. Sad to se it come to an end. But now a whole different chapter opens. wish you the best on your future projects.

@jeroendevries7825 Жыл бұрын

Hi....I try to folowup the autopilot episode but I can't folow the part with mobiflight. Can you make a tutorial were you show how to add buttons, buttons with led, 7 sig panel etc? I think a lot of people would like to know how. Thx

@johnsp1221 Жыл бұрын

Are you going to sell any of the used parts?

@scottburrow8293 Жыл бұрын

Hey I’m new to this channel, and just getting into Arduinos . I’m curious how many Arduino boards were used for that project? Did you use the clones? I found you about a week and a half ago. Very inspiring. Can’t wait to see what you do next.

@helimech8152 Жыл бұрын

Hello Scott, I used between 23-28 Arduinos in the full unit. No multiplexers or shift resgisgerts. That may change now that mobiflight has incorporated them. This was when an Arduino mega cost around $5, not the current $20. And yes I use clones all the way! So much cheaper!

@bruhmanflight Жыл бұрын

Sad

@sfh294 Жыл бұрын

Can you please tell us where you get your heatshrink with the letters??

@helimech8152 Жыл бұрын

Hello, That is the Dymn Rhino 4200 labelling machine for heeatshrink. Avaiable from amazon for around $80-100

@sfh294 Жыл бұрын

@@helimech8152 beautiful! Thank you

@sfh294 Жыл бұрын

Wait, so you aren't printing on the actual heatshrink? Like you print out the label after you shrink and use like Clear label adhesive?

@helimech8152 Жыл бұрын

@@sfh294 No, it prints directly onto the heat-shrink. It's a heat-shrink labeller

@sfh294 Жыл бұрын

@@helimech8152 thanks so much! Are you using 1/4" or do they make smaller diameter heat shrink?

@gkkes Жыл бұрын

Will this continue with Mobiflight Karl?

@helimech8152 Жыл бұрын

Yes i think so. Because Mobiflight covers both prosim and PMDG 737

@StigBSivertsen Жыл бұрын

I never stop being amazed at how much work you have put into this. Thanks for letting us be part of your journey. I´m planning to build a desktop version of an A320 as I don´t have space for anything larger. Take a look at this video if you´re interested kzfaq.info/get/bejne/hqedm6ZlmaqUlJ8.html . A fantastic job but he has, as of now, no build plans available so I´m trying to make them. If this is a success maybe I will make a desktop version of a 737 as well.

@helimech8152 Жыл бұрын

It was a huge amount of work, but i intend to split each part down into managable sections now. The first thing i have learned, is that the whole model must be created in CAD first. This will stop getting to a certain part and realising it wont work. Ill check out the build now, thank you for the link and good luck!