Biggest shout out to Vtuned for all of his work on the Bronco. He’s such a pro!!!

V-tuned also came through and was a big help.

Don’t forget a shout out to V tuned without his help some of your builds might not be where they’re at today. He’s been a big help to you guys. Nice bronco great videos.

I don't usually comment that often, but seeing you guys go from that garage at your parents house, to what you have now is so inspirational. Keep doing you goonzquad!

Goon Guys, I am a Construction Engineer Technician / Army Chief Warrant Officer. Also, worked as a manager at Home Depot for 20yrs. Got a little advice about your retaining wall. It would best for your retaining wall to 1) Build a proper footer out of concrete, and 2) Lock the blocks to the footer, and 3) lock the blocks to each other with a good Landscape block/paver adhesive by Loctite OR better yet use a Type M mortar. At least chemically bond the blocks to each other if you're not going to install a footer. A solid, anchored retaining wall is much stronger and durable than merely dry stacking the blocks. Without a footer, more than likely your retaining wall will push out from the berm behind it over time - it will slide out. The geotextile you're putting in will help but it is a temporary band aid. My two cents and certainly not the only solution. Good Luck!

How about a shout out to V-Tuned for the frame work! Great job.

CAN'T BELIEVE YOU DIDN'T MENTION THE MOST IMPORTANT PERSON OF THE BUILD. V TUNED AS YOU WOULD HAVE BEEN STUFFED WITHOUT ALL THE WORK HE DID AGAIN. HE REALLY DOES KNOW HOW TO USE YOUR FRAME MACHINE WHICH JUST AS WELL BECAUSE YOU WOULDN'T HAVE DONE IT WITHOUT HIM.

There are people who deserve thanks also for the help they made in this building and you never mentioned them - your father + your wife + your friend

At 4:59 you can see the whole wall move under the weight of the excavator. Keep an eye on it guys

Well who else is hyped for the 3rd wall-rebuild video :D

Way to thank V-Tuned guys. You are really top notch recognizing the fact that he fixed 75% of that car, if not more. But yet you thanked your sponsors the whole end of the video. Keep up being so humble. 😒

I know a while ago a lot of people were commenting and saying they don't care about the house builds and they want to see more car videos but I personally just wanna say I absolutely love watching everything y'all do from cars to the house to the dogs to just everything and I was hoping to see more house builds video!

Maybe v3 of the retaining wall will finally be done correctly. Meaning hopefully they hire a pro after this falls

Another great build! Not a Ford fan, but the retro stripes and body kit make it really stand out! One of the better builds you fellas have done!

Guys, been following you for quite some time now and love what you’re doing and what you have achieved. 9 years age our son was killed, hit by a train while stuck on the railroad tracks. Seeing you “playing “ on the tracks brought all that rushing back. PLEASE PLEASE DONT. I would be devastated to see this happen to anyone. Be safe stay kind. And tell mom and pops you love them every day.

"not going anywhere" *wall moves 6inches when the excavator got close* Can't wait for the rebuild episode #3.

lol did anyone else cringe when that retaining wall shifted 6 inches?

That geogrid is nothing like the geogrid I've ever used in my retaining wall builds. That geogrid will sheer right off the way you laid it parallel to the wall. Ive always laid it perpendicular in segments and the geogrid I've always used has the large bands on the edges for strength. I feel this is a project you shouldve hired out.

You thanks everybody for this build except the main man who put the frame back together. A huge big shout out for V Tune man, how could forget VTune’s amazing ability. Shame shame shame.

NEVER forget to mention Vtune in your videos especially this final completion project. Without his help most of your car rebuild projects would be a failure! Honestly, Vtune is the Angel for your channel! BTW, what had happened to your GMC truck and $15,000 cash prizes? Had anybody won these prizes or it just a trick so that you guy can sell stuffs from your channel? Again, you guys need to say THANK YOU to Vtune on your next episode. Without his help you guys can only do a basic auto body repairs!

I admire you guys enthusiasm you always ready to take all kind and challenges Very positive attitude and you complement each other. Even your bla bla sounds good you make everything look good could be falling appart but still find positivity in every build master salesmans

Well, I asked for a house update and got it. I'm impressed with everything that you all have done, including rebuilding the wall with extra strengthening. Nice work. The completed Bronco looks great. Nice job to all who helped with the rebuild 🎉

I'd be proud to own this build for sure. Probably my favorite one yet

One of your best builds to date. No one has a Bronco this nice on the roads.

Simeon, thank you again for coming to me for parts brother! I really appreciate it.

I'm glad to hear that you guys got another build complete. I cant wait to see what you have in store for the Urus and many more builds in the future to come. Keep up the great work.

MAN, That Bronco turned out great, Awesome job guys!!, Enjoy it, Tha nk you for sharing the build with us, I'm ready for the next one, Bring it fellas.

There is a lot of hate in these comments for no reason, so I'm just here to say don't sweat it guys. I love your videos, millions of people love you videos, but some people see success and just look for a reason to hate you no matter how small. I'm sure you guys will figure this retaining wall out because I've seen you put together stuff 99.99% of these haters would never even try to attempt. Love from Iowa

This why i love this channel because you brothers like learning and it's not always about car's . You brothers are doing the right thing cause if one business fails you have construction experience to depend on . So keep up the amazing work 👍😎👍

Guys, You should rent a Ruckus Rake attachment for the Kubota to sift out the existing top soil versus spending money on more soil. It will smooth it out like butter and will be ready for Grass.

Guys, you need a top stone to give the wall a finished look. It’s called a coping stone. Comes in rectangle blocks and is custom cut to match the curve. Will finish it off nicely and sits slightly above grass to help with edge trimming.

The dealer technician that started & idled a new vehicle with no oil? Dude is a supertech !

Guys that’s the most beautiful and aggressive Bronco I’ve ever seen!! You did a fantastic job customizing it to perfection. The stripes really bring out the Baja vibe. I absolutely love it!! I also love that you guys are great role models for younger young men who need to see that you don’t have to curse and speak negatively in life. Keep up the awesome work and God bless you and your families!!

That Bronco looks great, you guys did a stand-up job on it and should be very proud of your work!

Man, with that GeoGrid in there that wall is bulletproof! When you were packing it down you could see the wall move as one and the whole wall is wicked strong now. Good job!

I remember when they first put that wall up. Everybody in the comments was saying that it was going to fail.

These two are really confident with all of their works, very enthusiastic, although most of the time, until eventually they told us that something wrong is going on with this or with that.. anyways, good luck.. God bless..

Can’t wait for the next build you guys are awesome and amazing people and you take pride in your work keep it up

4:53 when the excavator compacting moves the entire wall 😅

Thank you for the driver side stripes. 😊👏👏👏👏

I love the stripe decal on the Bronco. Great choice! Totally works with the DRL's color

You guys crushed it on this build! Nice work!

Great work! Loved following this build! Keep doing you! God bless!

Marvelous work guys!!

That Bronco is the sickest ride yet. CONGRATS GENTLEMEN

Great job fellas you guys rock your dad also and your family

I watch a lot of builders on KZfaq and out of all the Broncos that have been done so far your guises is the nicest looking one. Congratulations on the bronco. I’ve been watching you guys since you were building cars in a makeshift tent. I’m really happy for you guys. 👏👏👏

the car locks amazing. love your work.

I like your car builds and how you are learning more constantly. As for the house, I'd would have liked to see footer drainage and footer wall waterproofing... Without those, it might be too expensive to learn from mistakes.

Wow ! Definitely glad to see the stripe added to the drivers side. You guy did a beautiful job !!!

Looking forward to the next build 🎉

Love the Retro Stripes and great looking build. This one's a keeper.

You just forgot to thank VTuned, nothing fairer than a "thank you"

I think she turned out perfect. Like the color, and I really like the fender choice, looks way better then the Bronco Raptor. 1 minor detail is them spacers. She would look way better with them off. Right now a sick bronco with wheel spacers.

The most prettiest Bronco I've ever seen

The bronco is my favorite build so far 👍🏻

“We like saving a bit of money here and there.” From a dude that spent 10k on a front door. 😂😂 AMERICA,what a country.

You guys could film almost anything. I enjoy the house updates as much as the builds!

Great job, guys. That Bronco looks amazing ..

Absolute beauty of a build, I never really liked the new broncos but this one is truly the nicest one I’ve ever seen!

I love the house content as much as the car stuff! Keep it up boys!

The house is looking good

Amazing build. Watching you guys for years and this is my favourite build. Great comeback from the criticism received for the Porsche and Lambo. Great work

The best Bronco I've seen... great job guys...

That retaining wall definitely won't hold up. My advice it's to add some rebar and concrete inside the blocks, or use big boulders behind it. Another option it's building a gabion wall structure.

I'm a custom home builder from los angeles specializing in hillside builds. That wall needs to come down. Before you rebuild you need to check with an engineer to see if your house foundation can take the lateral load because it's now being used as a retaining wall as well. If the engineer is ok with the house foundation I'm sure he will instruct you on how to build the retaining wall correctly.

Awesome build ! Remove the plastic bag covering the airfilter inside your cold air intake .

Glad you guys have completed the bronco it looks awesome can't wait to see what's next for y'all Happy Easter today to y'all family.

It would be interesting to Dino the bronco before, and after the cold air intake, to see if it really does make that much difference in horsepower or if it’s just hype.

Big thanks to Vtuned!!!

Amazing what you guys do on that wreck .It looks so amazing and I am happy you throw on the second decal it looks much better with it .Of course you have the coolest Bronco I ever saw !!

Enjoyed all your Work on the Bronco......

The bronco turned out absolutely amazing, excellent job guys. Very good job on that retaining wall this time, I doubt it’ll be going anywhere now. Gotta say that house it incredible from those awesome light up stairs to that killer hidden door to the laundry room.

Guys, I love this Bronco build. Lots of inspiration for my own Bronco. Beautiful aftermarket parts made this truly standout. Keep it simple and in your wheelhouse. Just the right amount of damage for y’all to handle.

there's a superb piece of animation of the wall movement at 8 blocks in height, around 4.53 i think, as the Kubota brings in more top soil and pads it down, the combined weight shift the wall a good couple of inches personally i wouldn't have the Kubota on top, it just adds to the problem you had previously, you really need the soil to settle under its own weight and allow for topping up as required, otherwise great job super job on the Bronco - almost a Landy

Kind reminder: NEVER forget to mention Vtune in your videos especially this near final completion project. Without his help most of your car rebuild projects would be a failure! Honestly, Vtune is the Angel for your channel! BTW, what had happened to your GMC truck and $15,000 cash prizes? Had anybody won these prizes or it just a trick so that you guy can sell stuffs from your channel? Again, you guys need to say THANK YOU to Vtune on your next episode. Without his help you guys can only do a basic auto body repairs!

That wall won't hold (again).... It needs concrete and chains & poles.

oh wow.. finally a build that is really complete! congrats boys!! 😄

Beautiful house, like those accent lights on the stairs. I would say my favorite part is the drive thru garage, I wanted to do that with my shop I want to build but a large roll up for campers. 👍🏽

Bronco build is my favorite so far! Awesome work guys!

⚜️ Congrats guys, y'all took custom to a whole new level. Hot wheels need to make replicas of this epic custom machine.....

Beautiful! I'm worried Those front shock reservoirs are going to get destroyed though sitting where they are if you off road it.

I like the creativity that you guys did to the bronco. You didn't overdo with the bronco, you did it just right. It looks amazing the way a bronco should look when it's custom. Sometimes over don Broncos look cool but they're not for everybody. But this bronco is very very nice. I really like that stripe on the side.

House is looking great 👍🏿 Simon!

Those side stripes remind my of that Tonka Toy Bronco from the 80s. I'd put a big TONKA sticker on the tailgate to complete the look.

hello, you have to check the area of the air conditioning units, it is a little low on the ground and when it rains the water can flood them.❤

Your Bronco turned great looks even better with other stripe on great job can't wait to see your next build.

Killer build, love this one . Great job.

Probably my fav build guys, I loved this series and how smooth it was, it was MUCH needed for this channel n

Don’t forget about Vtunes he helped you guys out a lot on the bronco build.

Gotta say one of my fav builds you two have done so far!!! Very cool

That bronco looks amazing! That’s a dream spec build. You’re right, getting one on the lot right now is insane!

Plus Ben's/Vtuned's labor.

I would plant some shrubs above the wall it will help with the water as well. Also please pull the stickers from the dealer off the back tailgate! I hope this is the next giveaway, I would buy some dang sauce for sure.

Very well done build nice job guys love the strips

love the videos keep it up

DANG SONNNN!! Y’all boys just keep rolling 🔥

You guys amaze me every time! Definitely KEEPIT MOVINN

"Dude" usage, 947 times. DOOOOOOOOD! These guys are on a roll, DOOOOOOOD!

Everyone know that wall shifted like 6" and you are definitely gonna build that 3rd time 😂