Please help support my channel with a HEART SUPER THANKS. Thank you.

I agree how do you correct if it is 6 o’clock and rings 7 times

Thanks a lot. I had a sessions mantle clock that I only wound the mainspring and I didn’t realize it would get out of sync. This worked very well.

Thank you for watching my videos, Please 🔴 Subscribe 🔴for more videos. Thank you. kzfaq.info

Fixed, 👍very happy, thank you so much, no more 12 strikes at 1.oo am.

This worked! Extremely helpful. Thanks so much!

That was easy to follow and worked just like you said. Thanks.

Thank you so very much. Spot on reset of the hour chime.

Thank you so much!! It really worked.

Thanks so much for your help. Excellent!!

THIS WORKED!!! THANK YOU!!!

Straight forward simple to follow instructions. Thank you

Thank you!

Thanks! It worked!

Thank you for the quick fix!

Thanks ! Exactly the information I needed to correct the Swiss-made boulle clock I bought at a house sale.

Hello from Wyalkatchem. Western Australia. Thank you for video, Was able to fix chime

This worked for my Howard Miller grandfather clock. Thank you!

Solved my issue, and the instruction was even easy for me to follow, thanks.

Reset you're striking hammer so that it sounds right when it hits the gong.

My Howard miller clock chimes very random amounts on a certain hour and never does the amount it’s supposed to. Any advice?

I bought a Takeda clock and had it shipped directly to my parents in 1970 while I was in Vietnam. After they passed away. I inherited the clock. After being stored for a few years, I decided to hang it on a wall in my home, and discovered it would strike as if the time was six hours ahead of the displayed time. I'm going to try your technique, carefully winding the hour hand six hours ahead and post an update to this comment.

What if the minute hand is out of sync? It chimes on 10 minutes past the hour?

Going to try this later today , hope it works

Exactly what I needed. Thanks !

out with it lad :)

How do i know which weight goes where they were off the clock or does it make a difference 🤔my body weight scale won't register the weight of the weights

I have a Vintage Elgin Welby Division 350-060 Westminster Chime Mantel Clock it is striking the hour at 15 mins past the hour. after it strikes I have monved the min hand counter clockwise to the hour but it just goes on to stike the hour at 15 after on the next pass. Any suggestions as to how to fix. Thanks

Thank u. U rock

Thank you: as simple as described!

well done easy fix

Thank you so much! My mantle clock is 5 hours chiming ahead. I’ll use your technique to get it back in sync. Once again , thanks!

Piper grandfather clock does not time in sequence eight times twice at 2 o’clock several times at 3 o’clock and one time at 4 o’clock how do I get to time in sequence?

Ihave a clock Seth Thomas Westminster Cathedral clock that was repaired but always when I wind clock the chime would be off . So with your direction ihave fixed my chime problem . Thank you . Guy montefinese

You the clock man man Thanks for the info. Got a idea for future clock video's,put whatever it is above or under your video's It's hard to see what it is your doing. Just a suggestion. But your still the clock man man. From Chaparral New Mexico. Thanks for the info.

I just got the same clock but at 730 pm it chimed 10 times. It's stopped now. Will it reset it if I put it on 1200 n wind it?

Hi. Great video. Thank you. Just found a Seth Thomas Ship's Bell c.1921, all in excellent order except that the gong is two hours ahead of the movement time... exactly two hours during the four-hour watch keeping cycle :) Would the technique you describe here work for this situation ? This clock does not have a silent mode switch

The first couple times I tried this it failed. I then realized I had to stop the clock prior to adjusting. Voila! Perfect! Thank you.

Thank you very much!

My clock was two strikes behind the time shown. I did what you advised i.e. moving the small hand only, reset the correct time and it fixed the problem. Thank you.

Beautiful !!!

Thank you for your help.

Hi. Wow that Looks So easy! Hope you can help with the clock I’ve just inherited please…? My clock just doesn’t stop chiming on the hour I counted 15 or more! The hammer just keeps hitting a flat circular spiral spring in the back of the clock. . Also, as you look at the clock…do you wind the left for the chime spring and left for the clock, or the other way around? Thank you SO much

Thank you for your help. My new mechanical full height clock is now striking on the correct hour, but the Mimue hand is 4 minutes late. (Ie: it strikes the hour 4 minutes after the hour). I would sincerely appreciate your expert perspective.

Thanks ,,,,

My Smiths Westminister mantle clock chimes at quarter to the hour,, how do I adjust,?

Hi, Bulova mantel clock strikes correct hour with hands on quarter hour. ie: hands show 8:15 chimes ring 8 times. Rings on each quarter hour. Do I repair as you did above? Would be skipping the 1/2 and 3/4 hr. chimes or allow those to chime? Seems clock would chime next hour. But then could adjust hour as shown above? If you can even understand this question, what should I do? Thank you.

I only heard 3 chimes, not eight? We moved and I can’t get my clock in sync. I have it on a Westminster chime every quarter and that’s all messed up as well. The clock is running fine just the chimes are all off. 😔 Your clock is beautiful! Are you going to fix it to make it sound better? I love it.

Hi I have a grandmother clock and I am having a problem setting it can you give me some tips

Thanks for your time ⌚, have this to do to my clock I know very little about

This was very helpful - thank you. My question: I’ve lowered the pendulum disc as much as I can, but the clock still runs fast. How do I fix this?

Hi, thanks for the helpful video but my clock is chiming the hour in the half hour so it seems to be running a half hour ahead.. any tips on how to synchronise this please?

Very good. Thank you.

After syncing the chime, to get it to correct time once more, do you turn the hands clock-wise? I’m guessing counter clock-wise would loosen the hour and minute hands once more.

White I appreciate the video, my full length grandfather clock is from 1992 and looks nothing like this. Not sure why you'd use a clock from 1919 as your example as while it's nice it's not a very common fit people to own COVID from 1919. Mine uses a weight system and has zero keys.

I got a gingerbread clock and the second hand has a sqaure hole. Some reason the swaure hole doesn't add up to the correct chime time. So I basicaly put it wrong to make the time correct it's so weird.

Please help...I have a Hermle mantle clock and there are no screws in the back to remove the bezel. It looks like it may be pushed straight in and held by ???. I tried prying it but scared to damage the wood on the outside. It has a brass bezel that has lines around the outside. Not sure how to remove so I can change the quartz clock movement. The replacement part I found is Dual Chime Quartz Clock Movement HM354471, 16mm. Thank you!!!

Thanks!

Hi, I have antique porcelain Ansonia clock. It runs great but for some reason is chiming half hour on full hours and vice versa. How do I correct it ! I would appreciate your advice

I purchased a Kieninger wind up Wall Clock at a Estate Sale. The pendum doesn't continue to swing. I have no directions. Which side is the Chime? Thanks.

My beautiful standing clock have for 10 and half years now stop working the time going slower. . I say i would gey it fix. I put a new battery same thing. It give me many uears so i am grateful

Keeping the clock and strike / chime trains wound has nothing to do with this problem of striking the wrong hour. One thing has nothing to do with the other. With clocks that have both chimes and strikes both functions stop if the chime train runs down since it triggers the strike. With those clocks the wrong hour won't be struck, but rather the hour will be struck at the wrong quarter of the hour since the chime train is out of sync and it triggers the strike train. The problem with this clock was that the hour hand was in the wrong position relative to the snail which is human installation error. Rotating the hour hand from 6 to 7 moved the hour hand on the snail to where it should have been. A little theory: The snail is a cam with 12 declining steps on it. It somewhat resembles the shell of a snail. The snail is fixed solid on the hour shaft. When the strike train is started at the top of the hour the rack positioning lever is dropped onto the snail setting the chiming rack for the number of strikes for the current hour. As the clock chimes the gathering pallet turns moving the rack to closer to it's finishing position when the strikes for the hour are completed. The more hours that pass as you get closer to twelve, the lower on the snail the rack positioning lever falls causing the rack to have to travel farther. This clock doesn't have a chime train so you don't have 1/4, 1/2, 3/4, and on the hour chiming. That can get out of sync if the chime train happens to wind down but the clock keeps running. Most clocks have some form of internal chime train correction which will usually engage at the 3/4 hour mark by itself. In the case of those movements just wind it up and let it run. It will correct itself.

When you forget to wind the alarm spring, the clock WILL NOT GET OUT OF SYNC. Just wind the alarm spring and it will chime correctly. The snail, which controls the number of chimes every full hour and is connected to hour hand, has not changed position relative to the hour hand.

Great, but why if my clock won't strike at any hour? there seems to be zero info about this in the entire internet. Typical empty void of the useless internet.

I have a Howard Miller clock.. it's off by a few chimes. So it just went 3 times and it's 11:00.I can't really move the hour hand. It moved last night when we tried it but still not right.We have watched other videos and very confusing. So if I get it to the number of chimes or strikes (whatever it's called) then how do I move it back to the real time?

Hi I have a Seth Thomas clock the chime is ahead by 5 hrs so I move the hour hand by 5 hrs. But hope it does not damge the hour gear or shaft

My clock stricks the hours correctly but at half hour late.. ie at 6.30 it chimes 6 times. It has three key winding ports. It chimes correctly ? Every 15 minutes, keeps good time, just the hour chime is 30 mins late... Can this be reset at home ?? Thanks Chris .. uk 🇬🇧

I have an old 1930 clock, and it has the two crank positions. My question, is it the left side for the chime? and right side for clock? can u run clock without chime?

Hi there. I have an Amana Fredrick Hann Clock that strikes 5 minutes early. How do I get it to strike on the hour and half hour not 5 minutes early. The minute hand has a square fitting so I cannot take it off and place it back on to adjust for the 5 minutes. Thank you.

Hi, I bought a Elgin 201 clock. For some reason, every time it chimes, it's 12 o'clock. It never changes it's stuck at 12 o'clock. Can you help me with that? Thank you

Great video, We have a grandfather clock that will only strike one time any ideas?

is it ok to move the hour hand backwards? Thanks (my clock is striking 5 at 9)

My longcase clock is sometimes not counting enough times occasionally short by one chime. Only happens for 2 to 8 o’clock. Please advise

I have many mechanical clocks and love to watch to quick fix videos lol but now, my clock strikes 2 hrs behind the time...... can I move the hour hand backwards? please advise.

My clock isn't chiming. Haven't won't it in a while, but it was working last time I had it running. Why won't it chime or what can I do?

I have a school house clock and it would strike odd strikes How I fixed mine was when it struck 12 anywhere on the face I would run hour hand up to 12/ After that, it would strike the right hours afterwards.

Hello I have a westminister chime mantel that chimes but doesn't strike the hour can you please help me?

Any idea why my mantle clock chimes stopped chiming?? Thanks

We have a Howard Miller GrandMother clock. Some say only move hands in reverse. Our chime is way off. The clock is about 35 years old. Please let us know how to adjust chime. Thanks.

How do you do it if it is chimming 4 min late then the hr and half hr Thank you

The hammer needs adjusting to ,the ring is dead.

my bulova mantel clock does not open on face...what to do???

Yo bro recently found what I figure to be a 75-year-old clock trying to figure out how to reset it it's off by 2 hours at midnight it only strikes 10 LOL I'll try to find it it's really a nice clock and I don't even like clocks. 😁🇨🇦😁

What battery operated mantel clock...keeps chiming 20+ times no matter what hour

how to fix chiming 7 minutes before hour or half /hour chime is fine ?

I resync ed the hands ok and it chimes the correct time until it gets to 12- O'Clock it chimes 12 times . Perfect. Then it gets to 1 O'Clock- - It still chimes 12 times at the 1 O'Clock position ? How do I rectify that please?

Your clock is chiming minutes before the hour. That needs to be fixed. Moving the hour hand when the chime is out of sync is as easy as opening a door (I have searched for 'how to open a door' videos but none seem to be available).

I have a Waterbury clock and it strikes on the quarter hour instead of the top of the hour. How do I get it back in sync?

My wall clock Howard Miller. At any hour chimes 1 hour short. Six o'clock 5 strikes. How do I get this correct.thanks for your help. Iwill be watching.

My wall clock was working great. Noticed that it was chiming the hour on the half and the half on the hour. Any suggestions to correct.

Hi I have a Sessions click 100+ years old. The second hand came off and when I put it back in place the bonging on the hour has changed to the half hour And the ding on the half hour now happens on the hour 😮 Can’t figure out how to remedy this Please advise if you can. Gracias

Thanks making video my clock problem is After some days pendulum clock running slow time is not correct and they stop.

I have this clock that chimes every 15 mins, and there is 3 key holes.. im struggling to reset it.. pls help, can i email or anyway i can dm you..

Our 2 way Grandfathers clock is chiming correctly on the hour, but is no longer chiming at the 1/2 hour. Any suggestions on how to correct this?

My clock is all off by a whole lot. It is to bonging once on the 8 o'clock hour, it the same way to fix it as shown.

you got the chime to match the hour on the face but you didnt explain how to match it to the time that it was as you were setting it. You got it to ring 9 times with the hand on 9 but what if you were setting the whole thing at 3 oclock in the afternoon?

Does this not mean the clock is now running a hour fast unless you can stop the clock and restart when it seven o’clock .

example -My clock chimes once at 7.pm and chimes 8 times for 7.30 p.m.. kindly help

My wind up wall clock has three places to use the key, It chimes 18 minuets past the hour , so 6 o'clock would be 6.18 .

Makes me think of a tv show..