The CR18P Evo Pro Has Ruined Everything

Рет қаралды 46,852

5 ай бұрын

In this video I run and review the new HobbyPlus CR-18P Evo Pro RTR. This new release features an all new LCG aluminum chassis, big bore oil shocks, widened stance, and a revised drivetrain aimed at pure performance. Affordably priced, stunningly good looking, and extremely capable, it has just turned the RTR mini crawler world upside down.
Grab the brushed Evo Pro here: amzn.to/3SAHv6P
Cape Crawlers Merch: capecrawlers-shop.fourthwall....
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref=E5EBF8Fu - discount code CapeCrawlers
$10 off any order $100 of accessories: www.fmshobby.com/capecrawlers - discount code Capecrawlers
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracingparts.com/ - code CAPE10
10% off any Flubberstufferz products: flubberstufferz.myshopify.com/ - code Flub10CC
10% off any Cow RC products: cowrc.com/ - code CAPECRAWLERS
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Timestamps
Unboxing: 0:50
Key features: 2:09
FX118 comparisons: 5:37
First run: 7:15
Performance tests: 8:24
Indoor course runs: 10:03
I broke it already: 13:13
Rock crawling: 16:00
Final thoughts: 20:15

Пікірлер: 188

@CapeCrawlers 5 ай бұрын

Timestamps Unboxing: 0:50 Key features: 2:09 FX118 comparisons: 5:37 First run: 7:15 Performance tests: 8:24 Indoor course runs: 10:03 I broke it already: 13:13 Rock crawling: 16:00 Final thoughts: 20:15

@bestbattle 5 ай бұрын

Write the time stamp first and it should add them to the video

@ParczalaW 5 ай бұрын

is it rtr?

@TwigoGamer 5 ай бұрын

Bro, we need to get cape crawlers to 100 K he’s so close

@Elisplushies360woodierc 5 ай бұрын

So far I’ve gotta say this is the most capable mini rtr on the market.Great job with the this review.

@QuinnsRC 5 ай бұрын

I think it's the best budget friendly 18th RTR I've seen so far. With the HardPark Dementor announced today, I think we've go a new money-is-no-object RTR king. Can't wait to get my hands on an EVO-Pro though!

@adamgerber1127 5 ай бұрын

Gerat video, Adam! Just FYI, Theres a second output shaft on the back of the trans and if you get an aftermarket rear axel housing, some of them let you flip it so the diff gears are turning the opposite way. Hook up the driveshaft to the other output shaft, and now the axels are turning in opposite directions, eliminating the torque twist and keeping the front tires planted. I can't wait for a bigger aftermarket for this rig as i have only been able to find a handful of upgrades for it, mostly fx118 and cr18p crossover parts. There's next to nothing specifically for the Evo Pro as of yet.

@keithbutler6361 5 ай бұрын

I ordered one as soon as they came out and I'm still waiting for it , apparently it's still in the US , I'm looking forward to unboxing it when it eventually arrives here in the UK , looks like a little weight will improve the car and I will try some different tires but I am a fan of that type of tire tread , i think i will fit metal drive shafts after yours failed so quick , great video again keep them coming , stay safe and a happy new year to you and your family mate 🇬🇧

@matthewcopeland4441 5 ай бұрын

As always great video Adam, appreciate the channel! Really excited to see more of these Evo Pro hit the market, and looking forward to what people are able to do with them!

@joshuamccreary9279 5 ай бұрын

Whips it out and breaks it. Then, fixed it and is still amazed!!! I love it as well! Great episode!!

@anon556 5 ай бұрын

Everything the fx-118 crapwagon should have been. You can tell how much thought and actual care went into this rig.

@CharliesCustomCrawlers 5 ай бұрын

Absolutely. Huge disappointment from furitek as usual.

@maxwell5428 5 ай бұрын

I see this as a plus. Hobbyplus and furitek are not the same company. They just collaborated on the fury wagon. Hobby plus waited and saw OUR complaints and the mods we were doing to them. And decided to take those into account with an improved chassis. The other great thing is everything on the evo pro is compatible to the fury wagon. The chassis and skid will come in around $26 USD. An easy swap over. Stub shafts are $7 I think.

@jonquinlivan4208 5 ай бұрын

I have to say I love your channeland its one of my favourite to watch. I take my two boys out with me and they are 15 and 18 so its great to see you taking your son out with you. Keep up the good work and i hope your success continues for the new year. Just one more thing what is the red truck you compared it to I cant remember?

@TheShopMiniRC 5 ай бұрын

You do know that furitek helped inspire and inform this rig right? Without the fury wagon and furitek, hobby plus would never have gone this direction. Furitek and H+ have been working together to improve these. Also, everything on the evo pro is the same as the fx118 except the chassis rails, sliders, +5 shafts, tires and motor Same exact axles (minus the +5 axles shafts that REALLY increases scrub)., shocks, servo, transmission housing, suspension links, steering links, portal gears, servo gears, diff gears and if you get the brushless, Same exact electronics.

@slickster3211 5 ай бұрын

I love when manufactures look at what everyone is doing (that completely changes a stock rig) and just makes their “stock rig” exactly that.

@adamr9215 5 ай бұрын

I hate that. Working on these is where the fun comes from. Buying one that I can’t upgrade is just boring.

@slickster3211 5 ай бұрын

@@adamr9215oh there will be plenty of upgrades to come, but the fact that we get a solid base to improve on is very nice. The only thing that is from the factory on my SCX right now is the esc and that may change soon 🤣

@acetiv8 5 ай бұрын

On the road to 100k my friend🙌 good luck and incredibly happy to see how far you have come🤘 Another great vid

@CapeCrawlers 5 ай бұрын

Thank you! Getting really close now!

@RCCrawlerz209 5 ай бұрын

Bro.. when I saw you throw your mini RCs away, I was like "NOOOOOO!!!! What's wrong with you?!?!" 😂🤣 LOL Glad your keeping them. Lol Cool new rig too. ✌🏼😎

@docwatsonn 5 ай бұрын

I love the looks of this truck for comp style, but didn’t like my scx24 with extended axles, it just doesn’t look real/scale at all. But does make it easier to crawl. Great review!!

@888rctx4 5 ай бұрын

Great Video!! I have the Brushless version and it is unstoppable. It comes with the Furitek Venom setup.

@adammcg5 5 ай бұрын

Very much enjoying your content dude, nice work. I guess my only constructive criticism about anything would be in the sidehill and vertical angle test. I have a feeling the slightly irregular speed of your arm may influence the rigs failing the test prematurely. It may be worth looking into some how mechanizing that part to negate any unnecessary influence as I feel this is a crucial point of testing. Just my thoughts 😁

@TrevorParkJones 5 ай бұрын

Thanks for another great video Adam! That thing looks pretty sweet! Crazy capable right out of the box. Thanks again man, take care!!!

@MitchellBolognaniRC 5 ай бұрын

So far I've been really loving my Cr18P and Fx118. This is definitely awesome. I just got the FairRc Limited Edition T-Hunter or I would have gotten one of those. Great Video Adam 🤘😎

@CapeCrawlers 5 ай бұрын

This has a lot of the upgraded T-hunter parts I feel. That looks like a great truck as well

@paulm1237 5 ай бұрын

You should add a pump jack or gear crank to the side hill measurement to get it really precise - eliminate the hand shaking etc.

@sebo-Kids-RC 5 ай бұрын

Nice Video... My hint is to use the Homes Hobbies 89T Motor.... is a killer setup

@RobConant-qb7bi 5 ай бұрын

I really like the look and functionality of it too. And I also would like to see it with straight axles. I would like to definitely see the brushless version also. I'm not much for brushed motors.

@2007bmpgti 5 ай бұрын

AliExpress has ‘em. $200, I paid $12 to have it shipped quicker, should be here late January instead of March. Comes with a Lizard Pro and a Furitek brushless… I don’t think it’s a Komodo, but I believe it’s an outrunner.

@The_RC_Family 5 ай бұрын

Bummed I can't afford one of these right now. I love the CR18P platform and this looks like it might be the best iteration yet. Great job showing it off Adam.

@AppalachianRC 5 ай бұрын

Been looking at these beasts. So glad you made this!

@RedRoxRc 4 ай бұрын

Been following you now for a few weeks. Kinda new to the minis. Great videos. Realy top notch reviews.

@LRCR 5 ай бұрын

Great review and test on the 18 RTR Adam💯 but the breakage would be a big disappointment especially to a New Enthusiast without the extra part's laying around...but seems like a Budget Friendly "Comp" Mini and with RTR's Upgrades are a must... ✌🤠👍 Having Fun Laughing Playing and RCing 🙏 Stay Safe and Play Healthy Throughout 2024 Blessings from the Great Smoky Mountains Tennessee ⭐⭐⭐

@CapeCrawlers 5 ай бұрын

You're right. If I didnt have a spare I would be super upset. It needs steel shafts or extra parts in the package

@boiledtea479 5 ай бұрын

Yoooo youre making Videos for us on the firts day of the year!!! Thats some nice dedication

@jgiles1548 5 ай бұрын

Nice review Adam! I received my brushless version last week and it absolutely rocks with out of the box performance. However, as a warning, I am having a bunch of issues with the ESC shutting off that i think they need to sort through before releasing more of the BL's. I'm trying to get mine taken care of and struggling with support from the seller. Uggh. I simply want to swap it for the brushed version since the truck is so capable and I want to use it! I personally love the high speed gear as it makes transitions from crawl locations and trailing much more fun. Can't wait to see more of your videos on this one!

@Casitascrawlers 5 ай бұрын

This is interesting this broken axle mount & your esc issues must be a hit or miss thing probably going to regret saying it but I have the Furitek Brushless version like yours & have had no issues at all.

@wc4658 5 ай бұрын

May i ask where you purchased the BL.

@jgiles1548 5 ай бұрын

I'll give them a solid chance to work through the issue before putting their name out there. I sent them video documenting the problem, hopefully they'll stand behind what they sell. @@wc4658

@jgiles1548 5 ай бұрын

I'm also in a group on another site and there were some others who mentioned having issues as well. Hoping to get this sorted out, I really like the truck.@@Casitascrawlers

@brucejimenez833 5 ай бұрын

Thanks hobby plus for completely messing with my mind! Had a build planned. Platform, parts, exc.. now I'm torn! Very sweet rig, seems to be a very well thought out and executed rtr

@RISCRACER7 5 ай бұрын

Can you make another full crawler tour of all your crawlers because it's been so long since you did the other one that you did like 1 to 2 years ago and you've gotten so many more crawlers it would be really cool to see them all

@mikev221 5 ай бұрын

The intro was hilarious , very good!

@seniorxj2931 5 ай бұрын

Some Djcrawler pin tires and metal driveline parts and you got urself a competitor!

@BangForYourBuckRc 5 ай бұрын

Straight up good review my friend! This rig is definitely comp worthy out of the box!

@JT-np1op Ай бұрын

I have got the evo pro and fury wagon now, both brushless. They are amazing. Just bought RCAWD metal axles for them should be here this week. Gonna be epic!

@DL-ky4hz 5 ай бұрын

I have received one of this RC cars as a gift and i am at a lost how to charge the battery that came with the car without using the usb charger that came with the car. I researched chargers, and connectors, and lipo bags and everything gets more confusing as my search deepens. Could you recommend a good charger with the correct connector. Does all the hobby plus RC cars use the same battery connector?

@sonicusa 5 ай бұрын

Shouldn’t have told me there’s a brushless one, crawler collection getting replaced…

@il_DonGelato Ай бұрын

I have the brushless version. So smooth ❤️ But I think it's too wide so I used the T Hunter axle shafts. I also run smaller tires and brass wheels in front. Killer Performance now 👌

@ivanmaz2847 28 күн бұрын

hi, i've the brushless version too. Do you know the function of the dial switch? (1-2-3-4) Thanks:)

@il_DonGelato 26 күн бұрын

@@ivanmaz2847 Not exactly, but for me best is: all On, only No 2 Off. I have this Setup on T Hunter and EVO Pro

@ivanmaz2847 26 күн бұрын

Thanks

@cole___train5200 5 ай бұрын

I love mine. Broke my front driveshaft as well on the first day.

@WIMBIRC 5 ай бұрын

The little rc looks really good. cool video my friend

@joseaponte2829 5 ай бұрын

I've seen the brushless version after a couple days I ordered the brushed version.

@jmollick1 4 ай бұрын

@capecrawlers one point of contention...... box states 600mah battery, but all the reviews ive seen come with a 360mah, mine should be delivered tomorrow

@CapeCrawlers 4 ай бұрын

Great point

@JosephPerito 5 ай бұрын

I have the cr-18p rock van, it makes a clicking noise when driving on the rocks and turning is there any way to fix as I haven't seen exactly it's problem

@Mr.redneck 5 ай бұрын

Love your videos so informative im hoping you can give me some advice iv got a mcue edition k5 that I put the brushless kit you featured previously with the sliders but mines cogging on the bottom end and remote keeps blinking have you had these issues? How can I fix it iv tried using the app to little avail

@CapeCrawlers 5 ай бұрын

My light blinks constantly on my radio too. I was never able to get that to go away. For the cogging, check your firmware version. Sometimes you have to reset to factory settings as well..

@AllShadowFox 5 ай бұрын

Love mine! The only things I don’t care for are that the pins scratch the bed’s finish up quite a bit, and also the torque twist. Can’t wait to put some upgrades on it!

@adamgerber1127 5 ай бұрын

If you get an aftermarket rear axel housing you can flip it over so the dif gears are going the opposite direction and switch the drive shaft to the other output shaft coming out of the back of the trans which will make the drive shafts spin in opposite directions eliminating the torque twist

@stefanhofstetter54 5 ай бұрын

Fully agree, that are the only 2 negative points and the one which really matters is the torque twist. If that can be eliminated it will be the absolute beast 👍🏻

@stefanhofstetter54 5 ай бұрын

@@adamgerber1127Do you know who offers that axle?

@adamgerber1127 5 ай бұрын

@@stefanhofstetter54 I do not, I know of other models that have the same style trans but I don't believe that any of the aftermarket axels currently available have that feature. I'm sure someone will design one that way in the near future with how much traction this platform is getting already

@adamgerber1127 5 ай бұрын

@stefanhofstetter54 do you know if the fcx24 axels are the same as the Evo Pro? I may have found 2 different axels that allow you to flip the pumpkin cover around if they are in fact the same axels. They look identical in the mounting points of the center links, I'm just not sure if they are the same width. I had thought that the fcx18 and fcx24 used the same axels, and I think the fcx18 used the same axels as the cr18p. So if I'm correct I think the NEXX rear axels will work along with an Amazon no name one I had found as well.

@thiggtrouble 4 ай бұрын

Can you confirm which metal driveshafts will fit this? I want to order a set before mine arrives but am seeing various length 18p metal replacements online?

@ethanhawley4990 5 ай бұрын

I had a question about my Trx4m Why is my servo mount hit my upper links.

@vdel9036 5 ай бұрын

Is it the same receiver/ESC box than the cr18P (ref : FS R4A3-B) ? Nice rig. If i buy one, think i'll choose the brushless version to get even better low speed.😉

@Nutz_forRCs 5 ай бұрын

I had it narrowed down to two models. Thanks for adding a third! Seriously though, budget for one decent crawler plus a few upgrades. I was going to ask recommendation between the 1/10 Ascent with a fusion se 1800k, and the rather large 1/18 scale utb18 Capra with 1.9 bead locks and probably rear servo down the road. After this video, now I’m wondering about the brushless cr18p evo pro too. I have a modified 1/24 lcg deadbolt already. For under $400 which of those three would you recommend? Thanks! Love the channel. Wish Fall River had the crawling spots you’ve got your way 😢. Know any good spots West of you, like Dartmouth?

@CapeCrawlers 5 ай бұрын

Go with the ascent. Best bang for the buck there. You are a stones throw away from the best crawling spot in New England: fort Phoenix in fairhaven. I would pitch a tent and live there if I could

@Nutz_forRCs 5 ай бұрын

Maybe not a stones throw, but certainly closer than the cape! Thanks! Re the Ascent, do you think that throwing in a fusion se 1800 is worth it? I had been looking at a WP 1080 G2 and quicrun 30T for some better control and a bit more crushing speed, but then came across the fusion se. After tires, that seemed like the best change to make. Thoughts?

@Robbbbooo 5 ай бұрын

@@Nutz_forRCs Go with the Fusion SE. It has a lot of benefits (slower more controlled crawl, lower battery consumption, lower CG, allows for front mounted battery, can be used in future builds.

@Nutz_forRCs 4 ай бұрын

@@CapeCrawlers btw, thanks for the heads up on fort phoenix. You were right. It did not disappoint. Touch too cold right now, but will be going there as often as I can come spring. If you ever head out that way with some crawlers and want to give a shout out on your channel I’d love to see your favorite places or routes and it would be dope to see some of the builds you’re running.

@Nutz_forRCs 4 ай бұрын

@@CapeCrawlers also, went with the ascent and fusion se 1800kv. Stock tires on bead locks with two stage foams and some brass on front portals. Also removed inner shock springs. The ascent is AWESOME now. Thanks for pointing me that way.

@jpmiller7922 5 ай бұрын

Interesting. My CR18P Rock Van snapped its front driveshaft the first time I took it outside.

@gbresaleking 5 ай бұрын

The steel driveshafts are one of the first upgrades they suggest for rock van, that and brass hexes, and oil filled shocks

@postalacidity 5 ай бұрын

I've been looking at these but on the complete opposite side of the spectrum I have an SCX6 on backorder and I'll probably spend that money on a servo for it. I see one of these in my future though.

@TrokaRC 5 ай бұрын

Focus on one rig that has 2 speed, thats what makes these fun for me.

@TR850 4 ай бұрын

The main issue I have with the portal axles and / or maybe combination of portals and this type of transmission is the immense amount of play in the gears. I just hate when these things crawl unsteadily and occasionally roll down a bit once they manage an obstacle. On my fcx24 this totally ruins all the fun and I prefer the scx24 setup much more!

@wingnutbert9685 2 ай бұрын

I like the SCX24 scale rigs, but I'm very temped by this. Very! BUT..... not available in Canada!!! 😥😤 ???- Do you think it could be narrowed a bit for running on SCX24 indoor courses? Could those hex extenders be removed or would that slam the wheels into the knuckles? Thanks Adam! Bert the Weldor

@Casitascrawlers 5 ай бұрын

Interesting I have the Furitek version & have not broke anything yet & ive had it on some very grippy steep terrain. More people are getting them so I’m hoping everyone starts to upgrade & mod them mine came with a Light kit & I installed it getting some metal beadlocks as well & metal axles I love the 2 speed the Fury is super slow so you can’t move it any distance without having to pick it up.

@ivanmaz2847 28 күн бұрын

hi, i've the brushless version too. Do you know the function of the dial switch? (1-2-3-4) Thanks:)

@Casitascrawlers 28 күн бұрын

@@ivanmaz2847 You mean the toggle switches on top? It’s interesting they don’t say anything about what they do they acknowledge they are there though. It has to do with the drag break setting, reverse throttle or steering & not sure of the others but other models that have that remote show what exactly they do the settings are the same.

@ivanmaz2847 27 күн бұрын

@@Casitascrawlers thanks

@d1nzfe 5 ай бұрын

*READ 1ST* In case you guys missed out, you may not get a full oil amount in the shocks maybe half if you are lucky and full brass bushings..... awesome..

@jdiaz8289 5 ай бұрын

Damn it !! just pre ordered one!! look awesome great video

@techos32 4 ай бұрын

I know what im going to get!! Thank you for an awesome review

@TheMrShafe 17 күн бұрын

Question what are the little switches for a on the remote? Sorry never had a remote with these on.

@CapeCrawlers 17 күн бұрын

The first switch does your throttle (forward/reverse, or forward/break/reverse), the next does your battery type, the others do your drag brake settings. Check the manual to confirm, but I am pretty sure thats the sequence.

@bassboomboing 5 ай бұрын

I'll make room on my shelf for that!

@AdrianLopez-rm8ks 5 ай бұрын

Those cars are great but you should definitely tell axial to make the scx6 gladiator

@CapeCrawlers 5 ай бұрын

I will demand that they do! Although my bank account wont be happy if they do lol

@brownriceprod 5 ай бұрын

So...axial and horizon hobby are the same, fms and rochobby are the same, furitek and hobbyplus are the same... any other combos I need to know? Lol.... also, since amazon doesn't have everything nor is the cheapest, what other website is THE website amongst crawler/trail hobbyists to or RTRs and parts? (I've found a couple but want to know if there is an industry standard) thx

@Friskee62 Ай бұрын

I just purchased this rig...should be fun.

@Cbam871 5 ай бұрын

That vertical lift is impressive for an rtr

@CapeCrawlers 5 ай бұрын

Right?! Very solid numbers

@Imatre. 5 ай бұрын

Just got my fcx24 for christmas and now this

@crocsonletsgo9665 5 ай бұрын

That's a solid rig though. Enjoy!

@Friskee62 Ай бұрын

Where did you get the steel driveshafts? Thanx...

@CapeCrawlers Ай бұрын

Rcawd

@thesaint3389 5 ай бұрын

Where did you get that wooden test thing? With the rti index and all that

@CapeCrawlers 5 ай бұрын

It’s from crawler park. I found it on Amazon but you can buy it direct from toyswd

@thesaint3389 5 ай бұрын

@@CapeCrawlers awesome! I couldn’t find on Amazon that’s why I had to ask

@zakachuzachr.7259 5 ай бұрын

What wheels are on the fury wagon they look great 👍

@CapeCrawlers 5 ай бұрын

LGRP cyclone beadlocks

@timjones5403 5 ай бұрын

What replacement drive shafts fits on it?

@CapeCrawlers 5 ай бұрын

I used shafts from the FX118 furywagon. I recently replaced them with steel units from RCAWD: amzn.to/3HymHGV

@user-xm4kc7on7q 5 ай бұрын

really curious about how different the size compares to the scx24 and the trx4m. Like can it live in the same space

@CapeCrawlers 5 ай бұрын

Yes, it’s like a low and wide trx4m.

@MalcolmSmith-jw6pn Ай бұрын

Which is better the fx118 or the cr18p Evo pro? How does the log and adjustment of both suspension and weight of the chassis compare. Also how does the 2 speed trans with a bigger brushed motor compare to the single speed brushless. And also does the cr18p Evo come with bar rings or bushings. If it comes with bearings should that be a deciding factor, as to the fx118 katana comes with bushings, correct me if I’m wrong.

@MalcolmSmith-jw6pn Ай бұрын

I meant to say lcg* when I said log

@CapeCrawlers Ай бұрын

My vote is for the Evo Pro

@caseys_cozy_garage 5 ай бұрын

Makes me wonder why in the world doesn't axial make an scx24 pro like they do the scx10 pro! I'd buy it, I know builders who would still buy a scx24pro rtr from American hobby shops

@acetiv8 5 ай бұрын

I honestly really hope they are working on that🤘😅 been thinkin on that for a bit now too. Fingers crossed man😅

@caseys_cozy_garage 5 ай бұрын

@acetiv8 I hope our patience will pay off haha

@acetiv8 5 ай бұрын

@@caseys_cozy_garage we got this😅

@HellaNorCal916 5 ай бұрын

It’s gotta be in the works. Axial isn’t a company that likes❤ to be left behind of long.

@TrokaRC 5 ай бұрын

They won't make money, plenty of aftermarket support for upgrades.

@darkcloud4368 5 ай бұрын

Never seen you almost fall off that bridge. Almost looked like it was too wide for the bridge

@darrenfitzpatrick6490 5 ай бұрын

if you vent the tires is it still reasonable to drive in water, or will they just get filled up ?

@CapeCrawlers 5 ай бұрын

They’ll get saturated with water. If you’re driving in wet conditions a lot of the time I would suggest a 3D printed insert and tire venting. Two holes in opposite ends of the tire. That should drain okay

@darrenfitzpatrick6490 5 ай бұрын

excellent, i will try to find some that fit my tires. im new to this hobby, finding it amazingly fun/addictive thanks for the advice@@CapeCrawlers

@randomrob5688 5 ай бұрын

oh great i just got an scx10 pro, now i need to feed my addiction with this....

@brandonwynn9801 5 ай бұрын

Definitely the driveshafts are weak. Twisted the rear on the bl version. I'd still buy it again

@Yotahandle97 5 ай бұрын

You ever order those hobbysoul tires?

@CapeCrawlers 5 ай бұрын

No, I completely forgot

@cechylton4027 5 ай бұрын

It's very cool. But the money we put out for these , and they break on first run is very disappointing. But your video's are the best thanks.

@CapeCrawlers 5 ай бұрын

Hoping that was an isolated incident. I'll keep the community updated on its longevity

@mzondi1970 5 ай бұрын

I already put my order in

@annasoming 5 ай бұрын

thanks for the vid. like your pov. But the rig itself just isn't any leap forward... like the yearly new cell phone, no leaps. too much slop, 2-speed is not necessary, and the issue with the torque twist has been around for a long time and could have been addressed here. no innovation. hp could surpass fms but it hasn't, even though fms hasn't made any innovation since 2022 neither. a kit would have been awesome instead; bringing back options that we could customize including choosing motor type, single or 2-speed, and opposite running driveshaft already done.

@WeOutHere 5 ай бұрын

Good performance but loses points for scale detail and proportions, no one would confuse a photo of that with a real truck.

@Indy64738 5 ай бұрын

Hi, what about the torque twist? It seems quite an issue… thanks

@CapeCrawlers 5 ай бұрын

There’s a couple ways to address that. I’m going to try the full bearing conversion. That helps a lot with the trx4m. If it’s still and issue after that, there is a way to use the alternative output shaft on the rear of the motor. You’ll need a new rear axle housing that allows you to flip the diff around, but that combination is a sure shot to reduce the torque twist.

@Indy64738 4 ай бұрын

@@CapeCrawlers thanks!

@noahlapuz3853 5 ай бұрын

sold until 13:13 :)) T_T great review as always :D ^_^

@The_RC_Guru 5 ай бұрын

Great truck but they really should’ve released it with overdrive to be “comp”.

@jonhowland4985 5 ай бұрын

I’ve been waiting for this……

@beng.6417 5 ай бұрын

The low price point definitely shows in the overall build quality.

@Friskee62 2 ай бұрын

1,000...looks like I will be making another purchase.

@expediterfromgeorgia7981 5 ай бұрын

Are parts easy to get for this truck?

@CapeCrawlers 5 ай бұрын

They take a while to ship depending where you get them, but hobby plus has a bunch of stuff available for them. Rcawd also has a good assortment of Cr18p parts that will fit

@perryellisonjr9303 5 ай бұрын

So much for the beefy drive shafts lol

@CapeCrawlers 5 ай бұрын

Weak point for sure

@alexwicke7102 5 ай бұрын

Did anything break or bend in the beginning of the video..?

@CapeCrawlers 5 ай бұрын

Only breakage I had was the driveshaft piece while on the course

@varmintsniper2551 5 ай бұрын

Gotta have one now. Why do they keep releasing kool stuff right after I complete a build? Haha

@CapeCrawlers 5 ай бұрын

The timing is never good lol

@guest6423 5 ай бұрын

Why don't they put 1.9s on it and stretch the wlbs to 313? I mean, as soon as any size comes out, they get people to empty their wallets by making the next one just a little bigger. Duh, bigger wheels and tires, with a longer wheelbase and wider track is ALWAYS going to be more capable than a smaller truck. i don't know how many 1:1 crawlers run 22" wheels with 48" tires, but that's what we have here. It's kinda lame.

@mikeearls8158 5 ай бұрын

I want!!

@feverexplosion1968 3 ай бұрын

Traxxas TRX4m or Hobby Plus CR18p Evo Pro?

@CapeCrawlers 3 ай бұрын

For performance the evo pro. For scale looks, TRX4M

@power21100 5 ай бұрын

check out the. Cayman pro v2

@CapeCrawlers 5 ай бұрын

Got it on the bench! Video coming soon!

@power21100 5 ай бұрын

@@CapeCrawlersDAAANG! you get your truck fast! Mine is on the way! I can't wait for your video!

@power21100 5 ай бұрын

@@CapeCrawlers have you also checked out the radiomaster MT12?

@johnnyhotshoe1292 5 ай бұрын

So after the fx118 hobbyplus releases this awesome piece of marvelry and furitek re-releases the cayman with one of the ugliest bodies yet in rc. Either way im looking forward to the brushless version of this. For 219 it will be unreal once there is a fix for the flop

@TrokaRC 5 ай бұрын

Someone in comments says his has issues, recommends brushed version instead.

@johnnyhotshoe1292 5 ай бұрын

@@TrokaRC thanks for the heads-up

@CapeCrawlers 5 ай бұрын

Your comment on the Furitek body LOL

@BeardRubEnjoyer 5 ай бұрын

Ok, ok, ok. Big question: 24th or 18th scale? What are we building obstacles for? Someone needs to pick a lane.

@CapeCrawlers 5 ай бұрын

The trend seems to be 1:18 but I wish it were 1:24! My course is nearly obsolete with the bigger ones

@BeardRubEnjoyer 5 ай бұрын

That's what is seems to me too. Im feeling the burn with all these SCX24s, but can't deny how nice all the 18th scale looks. Appreciate your deep dives into these crawlers, helps a lot with what to spend on.