seeeeeeeeeeeeeeeeeeeeeeee im not crazy everyone gets offended and josh is white and mormon i assume he would know

Which one is the honda accord?

And just like a Civic, a Glock can be totally riced out with aftermarket parts!

Which one is toyota

No. The Toyota of handguns.

Also a better coating and the "marksman barrel".

@@japaokawa yes that too

They also added more weight into the barrels by increasing the diameter. It increases recoil reduction due to more weight in front.

@@josephmartinez3451 didn't know that, thanks for the info!

@@japaokawa Also the slides are alil wider and heavier to accommodate the slightly beefier barrel thus improving recoil even more ^~^ Gotta love Glocks innovation!

Pretty much. Only gripe I have with my 1911 is the slide serrations. I have the Remington 1911, R-1 Carry. The "dehorning" was a bit excessive. If your hands have ANY moisture or oils on them... ...I have to carry it loaded. Easier (and safer) than trying to load in a panic.

well you an i are in 2 different Americas, id trust 1911 over the honda glock ud trust a sanchez 380 over a glock and a 1864 colt

@@schrodingersgat4344 is it really the safest gun next to tx22 im not tryna blast my hip off

@@ProgessivesBwhitetho You won't, if you know your manual of arms. Loaded pistol is preferable to one that isn't. No different than carrying a revolver I. Either case. As for which is "better": Glock if you plan on beating the piss out of it. 1911 for most other situations. Then again, what do I know. I have both, and prefer to carry my TT-33.

@@ProgessivesBwhitetho As a retired Special Forces weapons Sgt, that carried the 1911 & actually own more then a couple of dozen of them, I think I know them well. I didn't say I love the Glock more then a 1911. My statement is clear strictly driven by logic not emotion. The Glock is no beauty queen, however they are super dependable, easily serviceable & what do you think the chances are that if you had to scrounge for mags while on the run, your odds are much improved. And the non stop chatter about ammo & ballistics, you think you'll have a much easier time finding 9mm over 45 or 10mm (my favorite). There's a saying in the military "Amateurs talk tactics, professionals talk logistics". My statement was quite precise & clearly stated for a particular purpose, in the end it's a tool that you can bet your life on.

"The Glock is a Glock" *video ends*

@@dillonc7955 the funny thing is when i watched it i accidentally paused it right after it said that, and i was literally like “wow, really?”

Only for a revolver might I consider that

Yea, thats one way to lose your gun to recoil.

Thank you good sir

Finally thank you.

Who cares it's all AI generated made up nonsense

My dude.

Thanks man

I'm a Gen 2 man with the G27

Lol same gun??

@@user-oc8sr3ml9m Yes and no. Same caliber and configuration. The difference is the finger grooves. I prefer the groves on my hand.

My buddy got one of the first Gen 5 model 45 caliber 9mm and his doesn’t have front slide serrations.

@@drewchorlton342it’s not a gen 5 😂😅

@@babyskeezLC It says Gen 5 right on it it was one of the first being produce. I was surprised just like you

Hurts just looking at it

You can break a thumb that way!

yeah i guess glock thumb is worse than garand thumb

Never remove the trigger safety or you get a Sig P320 with dropfire issues. The trigger safety was added at the last minute to the Glock bc an engineer used a blank to prove the handgun would fire when dropped to Mr Glock. It is simple inertia. The trigger weighs enough to overcome the spring and fire on its own if dropped at the correct angle from enough height. Finger grooves, stippling etc suck if you are shooting a bunch of rounds on a flat range, but not if your hands happen to be bloody in a two way range. It just depends on what you want the tool for, target shooting games or real world.

@@mnee4922 Stippling is fine, the grip is just the wrong shape being too long front-back and too angled for me comfortably. As for the safety, I know safety's should exist but I don't see a point in a trigger safety that prevents the trigger from being pulled unless it is pulled. I prefer a manual safety instead like the ones on hammer-fired handguns rather than striker (as nearly all brands copied Glocks double trigger safety). That's more of a comfort issue though, I'm not military or police or anything, I just like guns so I look for fun / cool over utility.

@@PlatinumKrown Grip size is subjective. If it doesnt fit you (or you just dont like it) then it doesnt fit. Ive always PREFERRED a slim grip and certain angles, but I can also use huge grips with angles I dont like on a SW Nframe or Anaconda, rifles, shotguns etc. The "trigger safety" is all about being drop safe. The gun gets dropped and the receiver stops but the inertia of the weight of a trigger keeps it moving and overcomes the springs, as if you pulled it. The "trigger safety" has almost no weight and has almost no intertia. Gaston Glock didnt think he needed it until one of his head engineers showed him otherwise, as told to me by the primary armorer instructor while I was attending an advanced Glock armorers course. Im also a Sig armorer and like the 320, a lot. Im also an old guy who started with a military 1911 (piece of absolute shit) but I like manual safeties like you do... so I REALLY like the mil 320s w manual safeties. Regardless, dont remove or override the Glock TS unless you want a handgun which is NOT dropsafe (or you want to replace the entire trigger with one very lightwieght ala new P320s so it might be dropsafe though some still devate re 320).

I never liked the grip angle either

People need recoil mitigation for airsoft?

@@hcctendeep7047 some airsoft guns have built-in gas-powered recoil for realism. I guess that just takes it a step further.

G19 gen5 is my favorite Glock for sure, especially with a Holosuns SCS and Timney trigger. The G26 gen5 and G19x are great options too with G43 being the best for CC. Imo

they just dropped the 19X MOS, just wish i could afford it, lol.

I will refer you to online store I got mine

On Instagram or telegram......

@Pham_smart11

Some people have "non-default" wrist anatomy. So if it is comfortable for them who are we to judge.

So it will his thimb that gets dislocated and not ours.

They never touch a weapon totally bogus.Notice they never respond to comments.

If it helps some people, I don't see the issue.

@@ColonelSanders17 it doesn't help anyone holding a gun like that lol. he's holding it wrong because he wasn't shown how to do it properly. That is 100% what is happening in this video. So please spare me the "what ifs"

50. Caliber. Glock. I’m just saying

@@totallybrucecampbell8446 20mm Glock, just saying.

@@Goosewitdajuice317 You will knock all the taco bell franchise with one shot. No worries

@@Fosi94 RPG Glock, just saying

@@twentytwo138 Gustav Glock?

I will refer you to online store I got mine

On Instagram or telegram......

@Pham_smart11

you noticed the voice is AI generated or is that just me? its sounds incredibly realistic but i hear some robotic-y noises now and then

funny the glock crowd loves dlc and miiiiiiine cwaft grown men sick

the hood and varrio like them 19 4s and hondas one in the same, notOGs they just like 22lr or the 10mm them 9 go through like butter, me and four of my cousins have more wounds than 20 vets thanks to 9mm the ones that are with abuela got 22s they should really move out

Why do you hate Gen 5?

@@ticktockbam their not compatible with gen 1-4, the slide is thicker, they did a bad job on the slide release on the right side, and the mag well, also gen 3 is a better price gen 5 isn’t worth it

Gen5 is way better than gen3 imo. Gen3 just feels old at this point and lacking features

@@jackmemphis777 I can admit that the Gen 3 is starting to become outdated compared to other firearms today. Even though I don’t like Gen 5, I do like that it is ambidextrous, and some of them come with cuts in the slide for optics. I also like the front serrations on the slide. But other than that I feel that Glocks in general should be less than $500

Yeah. No thanks to California.

@@FranciumBoron the GEN three is still great. I plan on getting a second one whenever I can afford it. Unfortunately I had to sell mine.

@Warren Rhinerson I have no doubt. Any Glock product is bound to be great. But the only reason Gen 3 is still in production is because that is the only Glock type that _Commiefornia_ allows. Very kind of Glock, very rude of the West Coast.

فرق نسل ۳ و نسل ۵ درچیه برام جای سوال هست اخه توی ایران نسل ۴ و نسل ۵ گیر نمیاد

Facts. I got a Gen 4 19 and a Gen 3 20SF 💪🏾

I will refer you to online store I got my stuff

On Instagram or telegram......

@Pham_smart11

He was at the time but I think he’s dead now.

Finaly Somone that compare Glock with an equal gun at himself

@@theepsilon-921 not really comparing nothing just talking about the Beretta just a comment not selling or marketing just talk or conversation topic for people that like firearms ect so many critics these days kinda then is funny because you get called a troll but yet wouldn't trolling go the same as if your on Facebook or any other app so basically even making videos could be trolling but no is just interesting conversation topics that some people have similar interests in. But honestly they say trolling but yet they post stuff or make videos just to see how many likes or what not very confusing world these days you know.

@@theepsilon-921 dont really understand what the hell your talking about compared a glock to who or what but no is just a conversation topic people use to do that believe it or not people would actually talk about stuff and get along but no comparison the glock and Beretta are nothing alike

On Instagram or telegram......

@Pham_smart11

The Porsche was beautiful, clean, amazingly frugal lines. No wasted curves. The Glock is pretty damned ugly. Blocky, devoid of any attractive lines. But if form follows function, then the Glock could rightly be called the Bauhaus of guns. And Gaston Glock may rightly be called the Walter Gropius of handguns, Gropius founded the Buahaus movement.

You sound retarded

@@ms.annthrope415 Porsche has been selling those exact same lines, for over half a century. Can they, not make the same exact car a million times? Hell; even Glock makes an AR pattern rifle ,now. Only took them 30-40 years.

@@luisreynoso9445 You aren't sounding any better.😁

I like how, people completely miss my point. Scenario: You got a special cake made for someone. It was phenomenal! You spent $150. You come back to get another. I tell you that this one is going to be $300 ,but it is SUPER special and different. You open the box... ... and it's same goddamned cake. That's the idea here. Two companies so stuck in there ways* they won't change squat. * Glock, now makes rifles.

Because that would make it an sbr

@@WesternWaster-2299 not if you call it a brace

@@User-dc6sm nah, you can’t just call a stock a brace. It’s a whole different product, not like the ATF cares

@@WesternWaster-2299 oh it cares :). A brace is just a stock without a plat (as far as your american legality is concearned). Here in germany they don't care about these things at all, for us just every firearm is illegal exept when you do a very expensive license. Like I believe you have to do multiple licences here

Has Canada had reduced gun crimes since banning handguns?

@@dishsoap1 ye

@@dishsoap1 still increasing as crimes are commited with illegal smuggled handguns. Firearm commited crimes have lower penalties too now than before.

Show off lol. 🤝

@@daltonshepherd2808 😂🤝

I recently got a used gen 3 17. I believe it's a police trade-in...FDE finish, some holster wear, etc. I didn't think I'd be crazy about the finger grooves, but it's a helluva gun. Crazy accurate. I think it's my new favorite.