There are 100 videos on injectors but rarely will anyone run the actual test like this. Hats off to you all these years later. 👍🏼

Thanks bro I really didn't understand how the draw test was supposed to be done but now I know, good video

Great video. Everyone should take the time to run this test

3 things: 1. A 1.8 injector will bring you to the 10 to 1 you are looking for. Russ sells the individual orephus’. 2. You will be happy with the check valve setup. I live mine. 3. Great video!

I liked the video but unfortunately I don’t know the formula to find out what my draw is

Good info 👍 👌

Check out Mike from Entrepreneur Army he had vid on using a 1.8

1.8 baby never look back lol you can put a metering valve on that Downstream line if the house is really clean😊

I think its 14:1 with 15 total at the end. Regardless, doesn't change the % application much. Thanks for doing the video. I really need to do the same test. 👍

Add some food coloring.. also what gpm M5 twist nozzle are you using for the 8? The bigger the orifice, the more you will draw..👍🏼

Thanks for the video to help out guy's like me starting out. I had a question but it's not to do with downstream. I heard you say that you have 200 feet of pressure washing hose on your reel, my question is do you have to unspool the entire length of hose when pressure washing?

Hi, I was looking around the Internet and General Pump (GP) has a stainless steel chemical injector. I think they have one for a 8 gpm machine. I believe it had 2.2 or 2.3 orifice but It was pricey. Did you have only water in the gallon jug to check the ratio? I could be wrong but isn't the concentrate soap a little thicker then water? Would it make a draw test different?

What's the math involved after you get your draw ratio to determine the percentage your applying? Thank you.

HOW DID YOU MEASURE OUT THE GALLON MARKS ON YOUR 55's? SALUUUUUUUTE😎

Thanks.... I should do this

Try putting a 1.8 injector in and see what happens, or take ball and spring out and put a check valve in and then just get you a metering device on your bleach or a little valve just turn it up or down you know good luck man thanks for the video,that's what everybody would do should do with their machine to know exactly so you're money baby

Do u draw with just water to test it or with actual bleach and surfactant

Thanks for the video, so your not even getting 1 percent at the nozzle?

You should try the 7-12 gpm twist... U are using the 3-7 now if I'm not mistaken (correct me if I'm wrong) but it would seem that if the 4 was giving you 1.25 on that tip and you switched to the larger tip you would drop pressure and pull more sh... If it worked out you could use either the 4 or the 8 with the same injector just change the nozzle.

👍 thanks

I see you did 1gallon of sh and 15 gallons of water so that is a 1:15 ratio with 12.5 sh.. How did you do your math I’m so confused? What’s the math behind it??