He woke up and chose violence.

Nah. I don't think this will take off like the O11 did.

thanks.. hope your trip is great.

I f*cking love how opinionated you are in your reviews. I love it so much. Not a generic "lets keep this neutral to keep ALL advertisers happy" - your reviews have personality. Please dont change.

I love the very last frame of the video. So wholesome. 🤗

Haven't watched a Gearseekers video in ages because of a packed schedule, I'm very glad this video was here when I returned :)

the long flat cable is so weird, hasn't anyone come up with a better connector? something like a riser to rog xg mobile (I know it's proprietary, but it's an example) adapter, but for internal usage

I am a big fan of cases that use a smaller footprint and build higher instead of wider. The less space it takes on my desk the better.

“I thought mirrors were supposed to be on the roof” bwahahaha. I love you for this.

I’m going to be honest.. I just watch these videos to hear “Away from the case” in as many ways as possible.

While I am not crazy about this case, I did enjoy the video. 10/10 will seek gear here again.

Thats my next Case for my next build

I really like the way this case looks, think I'll build a smaller pc into this case, like a stream pc or a pc for my kids ... love the content as always! keep it up

They should have put PSU in the upper part and delete the bottom area

This case looks like fun to do a custom loop in

Really nice to see some innovation for a case manufacturer, its honestly not for me, but i still like it. Klaire's Aorus advert was on point. Looking forward to watching your comptex coverage.

I still love the 011 family/style of case

Very cool! Just one question: can you plug a standard PCI card? Say I want to add usb or storage expansion via a PCI card

The o11d is the greatest case ever made.

it's kinda gimmicky. they just moved components to different areas on the case without actual benefits XD

Hey Nick! What would be the issue if I were to use a Corsair Shift PSU in that case? Would the cables (specifically the CPU power) be too short?

the xlr8 card looks like it was made for this case. looks awesome with the glowing x

What is the maximum GPU height support? I ask as GPU water blocks need some extra height clearance for those terminals and tubing / fittings. So what works length wise for a waterblock GPU may not work in height, it looks like it should have ample space given the ability to slide the card around but I was curious what it would fully allow.

"The 87 km long riser cable.." Yikes, where to put 86.99 km's of cable =/

Killer content lately!

Nice to see that you finally started to mention AU prices.

I love weird designs. This case is unique and awesome !

Nice design but, What will happen if I try to plug in some extra pcie devices on the mb, like rog hyper m.2... Does it really wide enough to support them

Outstanding Video & beautiful build! (you made it look easy)...just from "eyeballing", this the innovations look great...love the external rear fan capability...the ability to improvise & adjust fitment, especially consideration for the Radiators/fans & daisy chaining built in to boot, "whoa!", the Graphics Card & thorough physical support of the Vid-Card, wow!...for myself, as far RGB goes, I personally am not an aficionado of this concept, it would be really cool if Lian Li were to offer this case with a sans/RGB option for a lower price point, otherwise I would just opt to turn off these features...all & all, good on Lian Li for the product & yourself for the demo....thank-you muchly for the above!...jo'c

The legacy of Gear Seekers will never die.

Love you guys, God bless. Hi Klaire ❤❤❤

I appreciate Lian Li for trying something different to their usual, but to be honest, I'm not feeling this case. Great work from GS though!

I love everything about this case... But that weird open space where the riser cable is. I would love to see this case in matx with the board rotated and keep everything else how it is. That would be awesome.

I don't see how this gonna replace the o11 at all lol. It's meh at best.

Very efficient use of space. I agree this will kill the dual-chamber design. My only gripe is shifting front IO to the side. I use my case on the floor and they'll be blocked by the legs of my desk

Hi, i'm so curious how your 7800x3d idle so low...because mine 7800x3d idle lowest only got 40c. I'm use kraken z73 on my processor. Ambient room temp 23c.

My biggest concern about GPU riser card since the first time is that the big flat cables will block the pcie expansion slots. We need the pcie expansion slots for pcie capture cards, etc.

you are always doing that with those grommets 😁🤣

Would this work with my hybrid gpu (240) and a 240mm cpu aio simultaneously?

I can tell all the other case manufactures are getting nightmares. "pull away from the cassse" "pull away from the cassse" "pull away from the cassse" "rub the lotion on the skinnn"

Lian li responded to my message about the AIO clearance on the new Lian Li SUP 01. 76mm and the Arctic freezer 3 is 63mm with fans while most AIOs with fans are only 55mm with fans.

Dude! The difference from your flashback at computex and now is massive man, you've lost a lot of weight! Also I just built my personal PC this week and then a cool case came out.. kinda like when you wash your car it rains.. so you guys are welcome for the case. aha

Watched the entire video, still not sure how to remove the panels. Do i lift and pull them away from the case?

The only thing this is a nail in the coffin for is itself 😂😂😂

The fan connector reminds me of the Arctic P12 / P14 fans.

Very interested to see if both of those brackets can house 240-360mm rads. Independent cpu and gpu loops could work. Also seems like enough room for pump/res. Also knowing Lian Li, wouldnt be surprised if this gets some sort of distro plate with a liquid cooling partner at some point.

Crazy prediction here. It won't kill the 011. The only thing that will kill the 011 is the 011 itself by being around for so long.

I look at this case, at how weird it looks with those long pcie cables, i think it has more optimal looking if it was made for matx and smaller form factor.

i mean its nice and all but wont this have airflow restriction??

0:36 dammit! i like that xD 10/10

I was looking into this but realised this is not good for VR users who have a Valve Index headset. You'd have to take the mesh side panel off to run the DP to the card and....somehow connect the USB to the back or front left side of the case?

- The fans locations totally make absolutely no sense at all … ? 🤷🏻‍♂️

Since i air cool this case would not work if i'm looking right, i mean i could use a LP air cooler but not my kinda thing.

Where is this rumored pcpartpicker link?

It frees up the pcie space!

About time! I have wanted a case design just like this. The only thing that would have made it the perfect case for me, would have been to have the GPU along the back instead of the front, but, still, it is further away from the memory and CPU, which is a plus for me.

Sweeeeet video dude

Omg BEATUFIUL!

Finally, another case that won't cover the beauty of the motherboard.

So if you are building with an AiO you have your cable management sandwiched between the back of your MoBo and your Rad that you then can only bring out so much while the AiO is installed. Dont know if you could reach everything with just removing the panel for the fans. And while I understand the cooling concept, but wont believe its any better than other cases till the numbers show it, having the GPU up front seems like a very specific thing to do, so imo this seems to be a pretty niche thing for people that want something different which is fair but I dont think it will "kill" the O11.

Looks nice but seems like a bit of a hassle to build in plus not sure about GPU clearance

Luv my 011

*"It's not an 011, so I like it."* This is the shade and pettiness I come here for.

It's a very nice case but I don't think the layout is for everyone! I have the 011 and love it! It's my style. To each their own!

"Away from the case" 2:24😂

I really don't see the appeal of a front mounted GPU-seems needlessly complicated.

I don't hate the case, but definitely don't love it. Loved your video though!

Is the exhaust fan, uh, intaking from the rear? Nevermind of course it is.

really interesting design, I just don't like the position of the IO ports, makes the side look more empty to me for some reason, it's kinda in the middle of nowhere idk lol

you had me at "Big A** Aorus"

Yeah ill get one of those... Thats cool, finally a great reason to ditch my bulky Corsair D5000

Poah, finally someone else that said 011 is boring 🤣

This case may become niche if the rtx 5000s series actually goes for a oem liquid cooling setup (no room for tubes in the front)

9:46 i sure hope that riser cable isn't 87km, 50km would be better cable management wise.

This case has good thermal solutions. Good to se a vertical gpu with i/o shield at the bottom, cause at the top could have been a thermal disaster and overheating for the biggest part of the gpus. The fan as intake at the back is horrible !!! It's like the last minute solution for a designer who has forgotten to insert it in the project. Bad to see it in a case like Lian Li

I am absolutely no fan of RGB at all, I always try to keep it to a minimum, if it isn't avoidable at all. BUT! I have to admit at 16:16 this looks actually pretty decent.

we need to know how much rads does it fit:)

I wish they did a full mesh version. I don't need the TG.

The mirror on the bottom would make more sense if it were under the GPU. Didn't really seem to offer much in terms of view, so not sure why it's even there.

I LOVE THIS CASE OMG. I know the annoyance with some of the issues you mentioned, but this is the case iv been wanting, I was gonna build in the Jonsbo v3, but i think i might go with this once its available.

I really love the step away from fishtanks which have been the defining factor for like the past 5 years which Lian Li themselves pioneered. Honestly its just too boring at this point. This case looks very Alpha to me atleast, it still looks abit too prototype-y, the overwhelming velcros, external fan mounts and bottom mirror look like they are trying to hard to make this work, but its still pretty janky. But I believe its a step in the right direction. I hope they come out with more polished iterations of this case and specially, a version which hides the bottom portion of the mobo (with exposed I/o connectors and the gpu riser cable).

@5.05 mirrors on the roof, not the floor HAHAHA.... and then @5.20 'you gotta load it in the back' :D :D :D

I’m stilling waiting for that L shape PSU to release

I do like that, but I will stay with my with my Evo..

The RGB cage style is ugly. Better nothing there😂

YEAAAAAAAH

So basically this case has the best of everything. Take my money…..

I would have liked to see the gpu able to be mounted vertically in front of the motherboard so I can use a thicc radiator in the front

Can you install 2 GPUs?

I mean, this case wont do things that the o11 will do, so how is it even the first nail?

wish they do razer edition

😂😂😂 I love how some people hate on the O11 cause it's literally the most used case on the market and the one that every other company has tried to copy from. I love this case!

I really don't get why people aren't liking the case. Thermals for air cooled GPUs will be unmatched. Clearance will also be great. The cpu aio is fine where it is as it won't take any hot air from the GPU. You also have full access to the motherboard which makes it easy to add or remove nvme drives, clear cmos if needed etc. The real two downsides, the placement of the GPU as routing the display cables will suck but getting some 2ft extensions would fix that. The other is limited space for adding any capture cards, fortunately for me i don't use any so it won't matter to me but that would be a valid problem to others. Can't wait until mine arrives. I had the original O11 and really liked it, but really tired of it.

7:49 my man, please blur it 🤣

Different design. Shame the psu shroud isn't mesh

The 5090 will like the PCIe extension cable, not.

I hate that gpu orientation and it needs to stop

87 KILOmeter long riser cable. LOL 🤣🤣🤣

Funny, when the 011 came out it was amazing and now because it became so popular and copied over and over by other brands it all of a sudden sucks. I wish everyone would stop bashing a case that was ground breaking and different when it came out and show that some respect. Yes it has been played out but just because its popular doesn't make it a bad case.

nope you are not taking away my 011D, this thing is butt ugly! I LOVE my o11 and nothing will replace it.