The Fleet That Inspired The ENTIRE CHEM-X LINE!

No video

The Fleet That Inspired The ENTIRE CHEM-X LINE!

Рет қаралды 857,344

Күн бұрын

This is the whole story right here, hang out while we get this truck tuned up!
Here's all the stuff in the order I used it to clean up this fine Peterbilt from SRS National!👇👇👇👇
Chem-X M-SHINE POLISHED ALUMINUM CLEANER: www.chem-x.com...
iK Foam Pro 12 Pump Sprayer: www.chem-x.com...
1/4" Prevost Safety Air Plug Coupler ISI061203 1/2" FNPT High Quality Prevo S1: amzn.to/3pmhLLT
My Reelcraft Water/Air/110v Power Reels: www.chem-x.com...
Chem-X HEAVY DUTY SUPER CONCENTRATED TRUCK WASH + DEGREASER + APC: www.chem-x.com...
iK ALK 9 Pump Sprayer: www.chem-x.com...
DETAIL FACTORY TIRE SCRUB BRUSH: www.chem-x.com...
ST-330 LOCKING ADJUSTABLE NOZZLE HOLDER: www.chem-x.com...
KNOBBY MICROFIBER CHENILLE MITT: www.chem-x.com...
Echo CPLB 58V2Ah Lithium-Ion Brushless Cordless Blower: amzn.to/3gLLoCh
EASY REACH WHEEL/RIM BRUSH: www.chem-x.com...
EASY REACH TANK BRUSH: www.chem-x.com...
EASY REACH ALUMINUM EXTENSION POLE 4′-8′: www.chem-x.com...
THE COMPLETE TOUCHLESS SOLUTION KIT: www.chem-x.com...
Chem-X STARS+STRIPES TOUCHLESS SUPER CONCENTRATES: www.chem-x.com...
THE REAL DEAL - TOUCHLESS FOAMING KIT:
www.chem-x.com...
THE COMPLETE MOSMATIC WALL BOOM EXTENSION KIT (TOTAL REACH 24' 7"):
www.chem-x.com...
Chem-X Awesome Sauce Detail Spray:
www.chem-x.com...
Edgeless 245 Microfiber by The Rag Company:
www.chem-x.com...
62'' Stainless Steel Pole - Scratch Free Chenille Microfiber: amzn.to/3AiheAY
Chem-X SNAKE OIL TOUCHLESS SIO2 CERAMIC FOAM SEALANT: www.chem-x.com...
Chem-X Tire+Trim:
www.chem-x.com...
"The Brick" Tire Shine Applicator:
www.chem-x.com...
Chapters
0:00 What we're up against
1:54 The drive by that inspired me to build the chem-x line
2:51 Mixing Chem-X M-Shine and Heavy Duty into pump sprayers
4:24 Choosing a good pump sprayer
5:03 How to find the best mix ratio
7:52 Trying out the new Detail Factory Tire Brush
8:37 Chem-X M-Shine+Heavy Duty Alcoa rim and tire cleaning
10:49 Is it ok to blow dry your tires?
11:36 Alcoa rim and tire results once dry
12:24 Chem-X M-Shine application under trailer (light cleaning)
14:03 Chem-X M-Shine application under trailer (heavy cleaning)
19:01 The best order to wash the exterior
19:40 Prepping for the touchless wash
21:37 Chem-X Stars+Stripes touchless wash
22:44 How much washing I could get done on the first fill up
23:00 Why I rinse bottom to top on touchless washes
23:56 Chem-X Heavy Duty as engine degreaser
25:59 Touchless wash results once dry
28:02 Using Chem-X Awesome Sauce for after wash tune ups
32:30 Chem-X Snake Oil SiO2 Ceramic Sealant
33:51 Chem-X Tire+Trim and final touch ups
35:01 The Big Reveal

Пікірлер: 271

@johnfuniciello 2 жыл бұрын

People whining about degreaser on tires are probably thinking that way due to experiences with degreasers/APCs used on interior plastics/trim/vinyl. In my opinion tires are built to withstand much worse, and if degreaser dries them out at all, you’re literally covering them in hydrating tire shine after….. as you said, “do you even drive on your tires bro” 😂😂

@muchachogrande2019 2 жыл бұрын

A lot of people say that it accelerates the rubber deterioration and actually makes the browning come back worse/faster. I honestly haven't looked into the science of it all that much but in my COMPLETELY anecdotal experience I haven't seen that to be the case. My thought is that the tire is going to wear out from ya know.... driving on it, way before it's going to wear out because someone used a degreaser on it. If you're really really concerned just make sure you stick to tire dressings that also hydrate and nourish the rubber or use a dedicated rubber conditioner occasionally.

@johnbaron3070 Жыл бұрын

@@muchachogrande2019 browning is by design I believe. Protects the tire.

@JerseyPiney Жыл бұрын

@@johnbaron3070 correct and also correct that most degreasers will dry out that browning effect that keeps your tires from dry rotting faster.

@honeygill4965 Жыл бұрын

Bro it’s a tire 😭😭

@MrFatdaz 2 жыл бұрын

I’ve always washed bottom to top, as you say, it’s easier to see missed areas, love your videos, that’s one hell of a workshop 👌🏻👍🏻

@jaceporter2820 2 жыл бұрын

You should play around with using your tire shine in a foam sprayer. I use it on a lot of trucks with mud tires that have knobby shoulder lugs, which makes it very hard and time consuming to apply with an applicator. Foamed it on, and let it settle and then wiped off excess, and desired sheen. Saved myself about 45 minutes that way.

@monsterford8009 Жыл бұрын

I use a cheap hvlp gun

@AlexGarcia-1998 Жыл бұрын

Just use a spray bottle and a tire pad 😂 you guys make easy stuff so complicated sometimes

@davidboyce6427 Жыл бұрын

Top notch garage setup for Heavy equipment vehicles . I’m blown away. Also Kona is an excellent German Shepard pup👍

@MegaLojay Жыл бұрын

Don't lose any sleep over the guys saying your doing something wrong. They seem to be all knowing as long as they can tell you so in the comment section of you tube. Great job bro.

@jlarosa22 Жыл бұрын

I've got on a binge of watching your videos over the last few days lol. I really started taking an interest in detailing again (used to do it professionally in the early 2000's). I think washing from bottom to top back to bottom works great! I think it all goes to how dirty, the size, and what you want to accomplish as far as cleanliness all comes into play. I have an order in my cart and look forward to trying out your product! Awesome videos, glad to see an entrepreneur making it!

@RogerDuhBoss Жыл бұрын

I used to work for an asphalt company a couple years back. My job was wash bay so I bet you could guess how heavy the cleaning was. We used to just use acid on all the aluminum parts. We’d just spray it on, no scrubbing needed, would take any and every dirt, grime, spots etc. off. Worked like a charm and the aluminum looked beautiful right after.

@truealpha7439 4 ай бұрын

Did you down stream the acid and did you use it on paint? I know you shouldn't hit glass

@KodaGamesYT 19 күн бұрын

@@truealpha7439I worked for a company that did downstream the acid

@aaronlang2726 2 жыл бұрын

Nice truck,worked with Jeff many years ago at CT MULCH

@shannonrobbins9723 2 жыл бұрын

I am a pressure washer mechanic for a industrial pressure washer company. So this is my job/my life. You are totally washing in the correct manner. You always should be rinsing bottom up. You push the soap around more going bottom up than top down. Keep up your good work!

@ralphllivrah9551 Жыл бұрын

You always wash top down. All that dirt just flows back over what you’ve cleaned. You’ll never get done. Doesn’t even make sense.

@michaelpuente3352 Ай бұрын

I recommend using the 2 bucket method when using m-shine. 50/50 with 2 bucket method will go along way.

@kirktitgen7453 2 жыл бұрын

Really sweet rig ....very enjoyable video !!!

@ChemX 2 жыл бұрын

Thanks Kirk great to hear from ya!

@KenyonPayne 2 жыл бұрын

Definitely the most satisfying detailing/washing vids on yt

@ChemX 2 жыл бұрын

Damn thanks much appreciated 😁👏❌💯

@armandoledesma3699 2 жыл бұрын

@@ChemX is that water nozzle a standard fuel gun ?

@ABB-bw6tc Жыл бұрын

Washing machine porn

@user-dd3pt1rs9q Жыл бұрын

@@ChemX привет . Сколько стоит такая мойка трака ? Спасибо .

@muchachogrande2019 2 жыл бұрын

While I love the detail factory tire brush, especially on low profile tires, for literally anything bigger than the average car tire I use a Great Value multi-purpose brush I found at Walmart for like $3. It's legitimately my all time favorite tire brush and it's basically the same thing as the detail factory tire brush only scaled up a bit. It's honestly perfect for tires especially on trucks.

@BelLavoroAutoSpa 2 жыл бұрын

I use a drill brush on truck tires bro no time to waste! lol

@minutemanmac 2 жыл бұрын

That truck looks amazing. I just got my S&S for my vehicles at home the other day and can't wait to try it. Now I just need to pick up the DLime 90 and Heavy Duty to try on our locomotive!

@joshnewsome300 2 жыл бұрын

Jerry has a bad ass fleet.

@belowfray5251 Жыл бұрын

I came for the wash. Stayed for the dog!!!

@darrenspremiumautodetailin8235 2 жыл бұрын

I love you’re actually honest

@Simplyput_ Жыл бұрын

haha i see the srs guys at work all the time, i love their trucks. Small world

@joellake26 2 жыл бұрын

Seeing the fleet that started the product. Tells me, I’m using the right stuff! Started using the touchless and the snake oil, this summer. Instantly, was extremely happy with how it left my truck. Just ran out last week, on the touchless.. now, looking to make another order with M-Shine.. if anyones looking for a great product, Chem X is it!!

@rheijne95 2 жыл бұрын

Damn, that's looking absolutely awsesome in the sun! Stunning job!

@tylockery887 Жыл бұрын

Absolutely love seeing these trucks on the highway. They’re a couple towns over from me

@94muddertrucker 2 жыл бұрын

You cut your hair. It's not the messy "just woke up"look anymore. I liked it 🤣

@ChemX 2 жыл бұрын

Lol good news is it can always grow back😂👏

@94muddertrucker 2 жыл бұрын

@@ChemX 🤣👌

@ashaharry2132 Жыл бұрын

I love love love your channel soooo much..the chemicals, equipment, monster vehicles and the explanations about all the products..oh and the foamy goodness..perfect...

@vinidomingues96 Жыл бұрын

Awesome wash... And beautiful Peterbilt... Watching from Brazil 🇧🇷

@knoxdrums 2 жыл бұрын

I so need to find those grommets for the bottles! I seen that in a previous video, wasn't sure if it was a new bottle or a mod to one! I hate undoing the bottle everytime I need a refil 🤣 Great video, great product! Im using stars and stripes all the time in my business.

@maurizzi2012 2 жыл бұрын

Shoutout from Wisconsin. Love the videos you make it so easy to follow easy to understand what your products do how they perform why I love using them ...

@propanetruckerbrock6937 Жыл бұрын

How about doing a cement tanker? Would love to see the results.

@fvckthemkids Жыл бұрын

For the mop thing, i use a ocedar microfiber mop (red stick, flat white microfiber head with blue stripes) ... I wrap a microfiber towel around the white mop head that comes with the ocedar mop head and tuck it behind the stretchy band of the white mop head and it t holds it perfectly

@WHITETAIL215 Жыл бұрын

Very nice set up

@JT-tl8kj 2 жыл бұрын

Well I’m a believer used it tonight on both my truck and car and can’t believe how it works will be ordering more

@marcosramos4596 Жыл бұрын

Guy has a good channel and a nice dog 🐕🐶

@kirktitgen7453 2 жыл бұрын

Kona is getting so big !!!! Beautiful German !!!

@detailit 2 жыл бұрын

Bobby! What's up BIG DOG?! a few things . That small brush would be FANSTASTIC on vehicle tires👍. The roof of this truck doesn't get taken care of like the rest of the Truck. As a Truck driver myself, 50% of the time people dont do more than wash n rinse the roof. Most dont dry it nor do they wax or protect it! That roof takes ABUSE like nothing else. That BIG FIREBALL in the sky, aka the sun🌞, is BRUTAL on any surface and especially so on Flat surfaces; cooking All day from all angles! Oh and the rinsing BOTTOM UP!🤬 I have had a little push back on that as well. One guy basically told me I was an Idiot and asked who taught me how to wash a vehicle🤦‍♂️.. IGNORANCE is BLISS 🤣.. great Video brutha. Lovin' Kona! Take care Bob! Oh, a guy on the Tube is claiming some of these High ph Low ph systems are HARD on paint and arent High quality.... everyone has something to say... especially when they are selling soaps too😉🤯. peace Bob❌...

@mikealderson7382 2 жыл бұрын

So much realestate to clean on that thing Big job

@eugenegrant2208 Жыл бұрын

That is a pretty cool truck you have keep it clean

@amyrparker6313 Жыл бұрын

in here that truck is clean

@davidsimons6881 Жыл бұрын

Nice clean SRS ride.

@eduhernandez757 2 жыл бұрын

good video I really like greetings and blessings from Monterrey Nuevo León Mexico 🇲🇽❤️

@mr.Bowtie40 Жыл бұрын

I like the gas pump water hose that's kool

@ryanbrandenburg1882 Жыл бұрын

Why I find your videos relaxing...idk

@loganpayer 2 жыл бұрын

For the roof, I do it last before doing the tires and aluminum, stand on the motor and brush it then rinse it, best way to do it

@ofeelma 2 жыл бұрын

I’d like to see you do a video with your products using a average homeowner power washer

@shannonrobbins9723 2 жыл бұрын

Will still do the same job. His pressure is the same as the average home owner machine. He just has some more gallon flow than a home owners unit

@lz7940 11 ай бұрын

Been using chem X for a few years it the only thing I'll use , snake oil is awesome, works great on ceramic, stars an stripes really works great

@stanguay169 2 жыл бұрын

Amazing job and wow, Amazing Pete!!

@regularguy3665 Жыл бұрын

“Don’t blow dry the tires” 😂 whoever said that probably thinks you’re using a hair drier rather than a leaf blower.

@nc.detail 2 жыл бұрын

This was fun to watch. Thanks for sharing 🙏

@karenburchett6612 2 жыл бұрын

Kona is getting soo big!! 🐶💛

@ritchdad64 Жыл бұрын

WOW!!! Amazing job👍🏽👍🏽

@kennyrota4075 Жыл бұрын

In the time of all this nice chat, I've already washed and I'm already on the highway!!

@codyalexander9470 Жыл бұрын

Yo the second the puppy came out you became my favorite detailer he is so cute 😍 I love german shepherds they're the best. Edit: she is so 😍

@ryanbachman9227 Жыл бұрын

A friend of mine Hass 2015 Pete he uses winks rust remover on his stacks for rust stains and def deposits. He has wiped his truck down with it then waxed it he cleans his windows then uses glass cleaner

@hptubez21 2 жыл бұрын

Gonna be ordering some snake oil real soon to keep on the mine and the wifes new rides. Loving the content!

@Lagoyda50 2 жыл бұрын

U should open a truck wash bro start on the East coast and who know might boom

@ChemX 2 жыл бұрын

Man who knows where this thing goes that would def be a great idea tho👏😁💯

@mcdickbong Жыл бұрын

love seeing these trucks on the road SICK

@vinniegillotti9347 Жыл бұрын

If I remember correctly, they started off as a paint and body shop for trucks originally

@jkgam3r735 Жыл бұрын

I would love to work in a place like this, it is my dream, I live in New Jersey.

@tucksmith8300 2 жыл бұрын

That rig looks good

@detrexninja1334 2 жыл бұрын

always enjoy your content chem

@stubaru4896 2 жыл бұрын

Would the stars and stripes work on normal vehicles? been looking for a good touchless soap for my car.

@bryantoribio9112 2 жыл бұрын

yes

@augiema3419 2 жыл бұрын

Local company to me always has his trucks clean!!

@adamtarquini9400 2 жыл бұрын

Awesome vid man. Love their trucks. Missed ya at gear jammer. Still gotta get MJD out for a wash. Hope all is well.

@Ekpnw 2 жыл бұрын

it does remove oils from the tires but only if you don't add protectant after

@nousername9742 2 жыл бұрын

Would love to see a complete inside and outside detail of a older Mack Granite like the 04-07 ones would love to see you go to work on one of those don’t know if u will see this or if we will ever get that truck but I pray we do man 🙏🏼 but another great video as always man 🔥

@rheijne95 2 жыл бұрын

The IK 12's work great with high pH products! The multi pro 12 sadly doesn't have a shrader valve like the foam pro 12. But you can easily convert the foam to a high output multi! With the orange tip, block off the air inlet (with some tape) and remove the cotton filter from the lance. Now it sprays out loads of product, bigger flow rate than the multi!

@user-eb9jk3qm4l Жыл бұрын

I put Snake Oil on my Black dump truck 6 months ago and still beads the water like it did when I applied it!

@fakeaccount4092 2 жыл бұрын

That dude owns a Harley lol!!!

@unclebilliamtube Жыл бұрын

Kona❤❤❤❤❤ I Love you Kona...more Kona please♡♡♡♡♡

@bishopcorva Жыл бұрын

Maybe wrap the first two or three feet of the pole in a silicone wrap so if you tap it against things it won't be metal making the contact. But for sure using a brush to agitate with the cleaner looks like the better way to go.

@bjlo4life 3 ай бұрын

Whoever said that the tire is getting destroyed is a mook. I’m not sure battery acid would destroy a tire. 😂

@copperheaddesigns672 Жыл бұрын

9:47 On a new tire theres a coating on it and all you have to do after a wash is apply a tire shine/protectant

@josemanuelalenalcaniz4899 Жыл бұрын

Gran trabajo. Me encanta. Enhorabuena por el canal

@dougkratz5269 2 жыл бұрын

"I might not know what I'm doing"🤣🤣🤣🤣 . Haters still hatin' on the bottom up washing technique. Lol! Keep doin' what you do,Bob. Pretty sure you know what's up. (Control panel on the lift needs M-shine)

@nicquintana1092 2 ай бұрын

Please explain the method

@skoglundHD 2 жыл бұрын

you need to do more videos like this !

@dirtydiesels3110 Жыл бұрын

I wish they still made fruehauf super renews. It would be the nitequil for aluminum lol

@rheijne95 2 жыл бұрын

That M-shine looks like an awesomse product, like the rest of your stuff! I've recently had some awesome experience with polishing aluminium by hand. It was just as oxidized as this frame rail, but just a pass or two by hand made it shine like crazy. I was using Optimum Metal Polish, but any polish would probably do? It would be awesome if an expert like you would look into it! I'd bet you'd find an even quicker and easier way to polish to a mirror shine.

@waynenorbreyjr9371 2 жыл бұрын

I have some that I still need to try on my 2020 Kenworth W990 that is about 3 years old and has a ton of aluminum on it. Pretty much everything except the cab and frame rails are aluminum. The trucks wheels are the only thing that has been polished since I’ve had this truck. Curious to see what M-Shine can do for it. Just might get me some more of it.

@Bryanb28 2 жыл бұрын

should i apply snake oil in the foam cannon more on the runny side or more thick like foam?

@SuperRayRay116 2 жыл бұрын

Terrific job 👍🏻

@marsellevandermescht8319 Жыл бұрын

I love your work buddy

@user-zt6bt8dp2c 2 жыл бұрын

Need to get some car haulers in there.

@MadMax-yq9ix Жыл бұрын

It definitely does not destroy the tire.

@potter7530 2 жыл бұрын

How often/have you shipped international? Would be great to have products like these over the water

@thebonsaiprojectkernow 2 жыл бұрын

I love kona, such a gorgeous beast The truck is ok too I guess lol

@willamloo6099 Жыл бұрын

Bro, this washing process was damn soothing. Love to watch it often

@GodsWiLL1974 Жыл бұрын

Nice work my man, where can I purchase those particular chemicals you use they look like they work pretty good! I really love the whole set up with the cart and your shop👌🏾 top notch

@smokeylovesfire1589 Жыл бұрын

Amazing!

@kevinjones7555 2 жыл бұрын

I see you took my advice and put a shreader valve in the IKs without them, oh wait no you didn't. Drill a hole in the neck with a letter R bit then tap with a 1/8 npt intsall shreader done! Don't even need tape plastic seals it. Just make sure you go between the webbing in the neck use a light to find it. I left one of my sprayers for a month still had air in it. Hope this comment helps anyone that reads it. WSNH.

@sabrina6499 2 жыл бұрын

Don’t look at my mic like that lol 🤣 what a great wash 🫶🏻 Love to see your products in action.

@Bloomamba94 Жыл бұрын

Where is this guy, i need my freightliner cleaned like this....

@rinjutatobe4579 Жыл бұрын

Beautifulll big car😎😍👍

@gerrystewart5774 Жыл бұрын

What about a swifter end like for floors to reach across?

@brucebonkowski9568 2 жыл бұрын

Another question matt has two old trucks a 1957 international semi and a AutoCar constructor with I think a aluminum grill but it faded as it worked in a mine truck only has 28,000 mile and figured how to polish that grill watch his videos and write me back to what you recommend

@slowlightning_ 2 жыл бұрын

I never dry the paint on my Pete lol i only dry the chrome thats where you can really tell the water spots, cant really notice water spots on the white paint

@johnclark4634 Жыл бұрын

Great content very informative also I’m a watch person what kind of watch are you wearing ? Thx

@APHIXrs Жыл бұрын

have a look at marolex sprayers..very good quality

@scottpennington8225 Жыл бұрын

That was fun. Thx

@vladbovdyr1858 2 жыл бұрын

I'd love to get my truck into your studio, how would one go about getting that to happen?

@silversides2011 2 жыл бұрын

I'd be very interested to see how you could clean the Anodized Aluminum on some antique buses in a historic fleet. Any alkaline products streak the Aluminum badly and it's very difficult to make presentable.