Thanks for all the informative and entertaining videos. I use SPAN to see the average tonality of a song in stereo and mid/side mode like you. And I use Decibel by Process Audio for VU and digital meters for stereo and mid/side monitoring. As well as for frequency analyzing and resonant detection. I also use Decibel for viewing an individual instrument or groups placement in the stereo field as well as to see how frequencies move within the stereo field for individual instrumets and the song as a whole. Decibel does all this with no noticeable CPU useage. Cheers
@QuaverloveStudio5 ай бұрын
Quite early into the video, I realised I had never been using it to its full potential. Thanks, Chris. Those settings do make a difference... AND I didn't realise you could do mid/side analysis on it!
@mixdownonline5 ай бұрын
Glad it was helpful, bro!
@leoparcoeur4 ай бұрын
I like the way you explain. Always straight to the point and efficient. And very intelligible even for a none native english speaker. Also I appreciate a lot that Voxengo offers a simple installer without plugin management module. That's nice.
@danielemeka605 ай бұрын
Awesome! Span is worthy to use always. Thanks Chris.
@mixdownonline4 ай бұрын
You're welcome! :)
@AlessandroBagagliprivate5 ай бұрын
Thanks, Chris! Have a happy weekend.
@stupendousmusic41905 ай бұрын
Yes! Do a TDR Prism demo.
@LondonSteveLee4 ай бұрын
It's a shame Steinberg still haven't put the focused listen feature into Frequency - the only thing stopping it being by #1 EQ. Ozone 11 EQ is free - that has the focused listen feature.
@greccoox5 ай бұрын
whata good plugin and more than that, whata good explanation for the plugin 😎
@mixdownonline5 ай бұрын
Glad you liked the video :-) Thanks!
@fftunes5 ай бұрын
And there are even more gui options under the 3-bar symbol top right. Span is an excellent plugin. 👍
@pawel94505 ай бұрын
Great video! Thak you! I`m using this plugin for long time already but never tryed to tune it more for my needs. You "opened my eyes" 🤩
@mixdownonline4 ай бұрын
Awesome! That's fantastic to hear :)
@verdi2605 ай бұрын
Chris thank you very very much. It was very useful for me to see your video. 😎
@mixdownonline5 ай бұрын
You are welcome!
@micwarren215 ай бұрын
I learned a lot from this presentation. Thank you.
@LondonSteveLee4 ай бұрын
You need to either get some racks or fit reasonably sized feet to your outboard gear - those three stacked outboard units are cooking themselves to death. The MPX has 6 valves (tubes) in it - you gotta let the heat out.
@korkenknopfus5 ай бұрын
Oh Chris, I have Span since two centuries, I think, but some of the functions I had never used and didn’t know the listen feature at all! There is another plug-in from Voxengo, I can’t remember the name at the moment, with which you can have a bar graph for the spectrum.
@smashgateproductions15875 ай бұрын
Voxengo AnSpec
@guitarbrad5 ай бұрын
Great video! Can you please show us how you would deal with sibilance using SPAN and/or TDR Prism? Then use an EQ or a de-esser to deal with the problem.
@LearnWithStephen5 ай бұрын
That solo feature 8:35 is great
@mixdownonline5 ай бұрын
For sure!
@brandenwilson43785 ай бұрын
I like to use Span to determine when my sides are peaking over the mids. Learned that from Joe Gilder.
@mixdownonline5 ай бұрын
I like Joe a lot!
@placeoflace5 ай бұрын
Terrific video Chris, thank you. Keep up the great work.👍
@mixdownonline5 ай бұрын
Thanks! I'm glad you enjoyed it
@iam-music5 ай бұрын
Cheers Chris...appreciate your efforts and contribution to the community. I put the in the suggestion (based on Dan Worall, I understood SPAN pretty well) and they didnt quite get it but once they did it was on the next release...kudos to Steiny!
@ErixSamson5 ай бұрын
I'm using Span and Supervisor
@mixdownonline5 ай бұрын
Nice combo!
@iam-music5 ай бұрын
Span was great for me for a long time.... Supervision takes a while to get around but as soon as they added MS overlay, SPAN was gone PRISM by TDR is a very diff alternative as well Thanks Chris!
@mixdownonline5 ай бұрын
Good to know :-)
@ErixSamson3 ай бұрын
Do you also use CurveEQ from Voxengo, and that is included in Cubase?
@Mitsch765 ай бұрын
Good video. I like Span for years, too but I have an issue with it. And that's it is using much CPU power on my laptop. I don't know if it is maybe the graffics from the FTT spectrum or the calculation itself... I discovered that my laptop instantly speeds up when within span I "bypass" the spectrum analyser and just use level metering. So I guess it is not because of the level measurements, but the FTT maybe. Did you have performance problems with it? (to be axact: Span runs perfectly but slows down other plugins for example the Pulsar1178. When Span is bypassed Pulsar1178 runs smooth instantly). Here I had 1178 on a track, while Span was on Masterbus.
@ShonnMorris5 ай бұрын
I love Span, like you, I have been using it for years. Voxengo is smart for offering this for free because it got me to look at and buy a couple of their other plugins. Chris one question; I saw somewhere a while back that it's best to adjust the tilt, I forget by how much but the low end would show up higher than the high end because of the way we hear frequencies. Is that not true or necessary?
@henrykdandyk61645 ай бұрын
Chris, please help. How to change the BPM after recording the project because I forgot to change it. Can it be done in Cubase Pro?
@IamHovaFlo15 күн бұрын
When I bring up my spectrum editor mode I have a type and then a 2nd type to the right which is giving the option of rt avg like the first “type” how come you only have one type and not the 2nd type how to I get rid of the 2nd type?
@MYGwienochnie5 ай бұрын
Great Video! 😊 Do you prefer this to the spectrum analyser from Cubase?
@mixdownonline5 ай бұрын
Yes, by far!
@mplstb5 ай бұрын
I wrote a comment mentioning TDR Prism, but can't find it here... strange/
@DJ-Clify3 ай бұрын
ok I did this now Which free plugins in order? so eq next to esser and which plugin free? thanks
@robertjason68855 ай бұрын
Chris...terrific Vid. As I own Sonible software, True balance, Smart: EQ, etc, wouldit still be beneficial to insert Span (which I already have...have to update...) in Cubase 13 Control room? Thanks much!
@mixdownonline5 ай бұрын
That's a personal choice, honestly
@mxcndnb5 ай бұрын
On my master channel I always have Span and Vision 4X
@mixdownonline5 ай бұрын
Oh yeah!
@Bsimracingnews5 ай бұрын
I never figured out how to get a reference track in Span as an overlay. I can do it in Ableton, but struggle in Cubase 13.