The Genius Miter Saw Insert That Doubles as Dust Collection

Рет қаралды 261,033

11 ай бұрын

Miter saws in general are one of the biggest offenders when it comes to dust in a woodworking shop, and the DeWALT DW716 & DWS716 are some of the worst. This zero-clearance insert has a hidden trick to capture and evacuate even more dust than normal to keep your workspace as dust free and safe as possible.
GET YOUR OWN DEWALT MITER SAW DUST COLLECTION BOOT HERE:
inspirewoodcraft.com/products...
DW716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
DWS716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
OR VISIT US ON ETSY
www.etsy.com/shop/InspireWood...
PATREON: / inspirewoodcraft
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoodcraft.com
INSTAGRAM: / inspirewoodcraft
Looking for DOUBLE SIDED PAPER TAPE, DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON THE BEST CIRCLE CUTTING JIGS HERE!
jaspertools.com/discount/INSPIRE
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstore.com/?streamer...
BANGGOOD WOODWORKING TOOLS: www.banggood.com/marketing-Wo...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com/shop/inspirewo...
SOME OTHER VIDEOS YOU MIGHT BE INTERESTED IN:
HOW TO MAKE THIN STRIPS ON THE TABLE SAW - • Throw Out Your Thin-Ri...
CHECK OUT MY TAPER SLED VIDEO HERE - • Unlimited Possibilitie...
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s KZfaq channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful.

Пікірлер: 481

@InspireWoodcraft 11 ай бұрын

FOR THOSE WITH 3D PRINTERS: We finally have the STL files listed on the website! You'll get the STL files for all parts, including the replacement bracket, plus instructions. If you do happen to purchase them, any feedback would be greatly appreciated! inspirewoodcraft.com/product-category/shop/

@tango3659 10 ай бұрын

I would like to know what is the minimum printer bed size to print the file? Thanks!

@HypherNet 5 ай бұрын

Just gives a 404 error...

@Vman7757 4 ай бұрын

This page is not reachable.

@InspireWoodcraft 4 ай бұрын

@@Vman7757 Hmm. All the pages are reachable for me. And we have been having orders successfully placed. Not sure what the problem could be. You could try our Etsy store too, if that's more convenient.

@Renrondog 4 ай бұрын

They will fit on an Ender 3 v2 if set diagonally on the bed

@MrPatateHead 2 ай бұрын

You haven't uploaded in a very long time, hope everything is fine.

@mxgonzy10 11 ай бұрын

Glad to see punching holes through it and screwing it in wasn’t just my idea! When I bought my dust collection sleeve thing, I didn’t realize I had a DWS not a DW, like you pointed out in the video. Will be buying the zero clearance because I love the upgrade and I want to support you and your wife!

@scottyoungblood5148 11 ай бұрын

I just discovered your channel and its Excellent!! Ive been a general contractor for years and I have to say, you have a great formula as to your presentations. Super informative without showing all the minutiae! I appreciate what you do! Thank you!

@PHIL_S 11 ай бұрын

I come to your channel because you either teach me something new or solve a problem - and most the time you accomplish both - well done and I hope these sell well for you.

@bullfrogpondshop3179 11 ай бұрын

Excellent work, as always! Very much looking forward to the dust collection on the 779!

@jodilea144 11 ай бұрын

I love seeing what people design and 3D print to solve issues such as this. Great job, Jody! I hope you sell tons of them! 🙂

@james.a 11 ай бұрын

I like how the boot bends and gets wider as you push down the saw blade. Makes it even more likely to catch the saw dust. Great work!

@robertrobinson3597 11 ай бұрын

I believe you have finally solved the Sawdust collection problem for Mitre Saws. Congratulations for thinking out of the box! I would like to do a similar solution for my older Makita LS1013L !0 inch mitre saw. I have been fighting the sawdust problem for years, with some successes here & there. I won't bore you with the details as you have demonstrated enough mistakes yourself. You have learned from them & that's what is most important that's what mistakes are for. Currently I have a 4 in diameter feed to all but one of my machines, ( Mitre Saw) which is connected to a collector with 2 micron filter. The Mitre saw resides in an enclosure which captures about 80 % of the dust. It is set up for the ducting to be added, BUT even if I can get 90% It just wasn't worth the trouble to run that Line. I have watched at leased a dozen Videos with great ideas that almost worked. Finnaly you solved the problem, I believe. Of course the geometry that fits the Dewalt saws almost certainly won't fit my Makita. But innovation doesn't have to stop here. I will purchase one of your gizmos and study it for the appropriate mods. It might just work for me. Those crafty Japanese figured out how th put the curf in the center of the insert on the Makita!

@MikeCaskey 2 ай бұрын

Agreed. Let's get this going for Makita saws

@user-hk3hr9wt7r 11 ай бұрын

I've been looking at several videos for solutions to the dust collection on the DWS779. While a slightly different model, it seems like you have the best solution I've found! Excited for you to put out a model for the 779, I'll be ordering both the shroud and insert!

@f.kieranfinney457 5 ай бұрын

Ditto. The big saw is more likely to be stationary and therefore benefit from proper dust collection.

@frankiepezzolla 11 ай бұрын

I find it amazing that Dewalt has paid engineers to figure all this out, but the talented woodworker guy nailed it with little thought. Much respect brother, Dewalt should sponsor or higher you.

@ifixbones 11 ай бұрын

Appreciate all that you have done so far. I will sit tight waiting for you to tackle the DEWALT 779!

@waynemiller6070 11 ай бұрын

I almost want to order one just to support the amount of work that you put into creating it. Nice job on the video.

@nbgambler 11 ай бұрын

Love the design, happily and patiently waiting for the dws780!

@therealknightrider 4 ай бұрын

I gave your solution a try. It really works! I’d say 95% or more of the dust captured. I’m so glad I stumbled upon this video. Thank you.

@KenCharlesTheGreat 11 ай бұрын

Nice job, 3D printers are such a game changer in the world of shop mods !

@meghanihamid 8 ай бұрын

You have just taught me how to gain from a common problem. In your earlier episodes I have observed you look for new ways to solve woodworking problems like eliminating the need for a jig. However this time you have shown me your entrepreneurship and I am highly impressed by you. Well done.

@clemoniii 11 ай бұрын

Jody, I hope you two make an insane fortune on these inventions! You certainly deserve it! As always, thank you for ALL your inspiration and education!

@doug.ritson 11 ай бұрын

Exactly the comment I wanted to leave. I think you have a great solution priced reasonably. Keeping going brother.

@jewdd1989 11 ай бұрын

I don’t have either mitre saw but the piece that fits in for the zero clearance insert… amazing invention! All of it is ingenious and if I had one of these mitre saws I’d absolutely buy it! I always worry dewalt and other brands will steal these solutions, they should hire you!!!

@Malba1776 15 күн бұрын

Hey bro is everything ok with u ? In my eyes u have some of the most creative, yet simply explained projects n tips. Hope u r well n look forward to watching a new video soon

@clutteredchicagogarage2720 11 ай бұрын

Great work! This is probably the best miter saw dust collection solution that I've seen on KZfaq. I don't have a Dewalt miter saw, but I'll try to replicate something similar for my cheap Ryobi miter saw at some point. I haven't used my 3D printer in a couple years, and I need to clean it up and tune it up after a move, but I do think that 3D printing is probably the best way to DIY this kind of bottom dust catching system for a miter saw.

@zacharycullen3677 11 ай бұрын

Im really looking forward to seeing this for the sliders....will definitely purchase one you get them.

@skigglystars9525 11 ай бұрын

Some things are worth waiting for. Thank you for the efforts

@ctfleming85 11 ай бұрын

Looks like an excellent product! Well thought out and solves a problem that historically only exceedingly expensive saws had remedied. I can't order right now but hopefully soon.

@richarddpetersen169 5 ай бұрын

I dont even have a DeWalt, but impressed by your "dust collection" .... Well Done

@robertpotochnik8005 11 ай бұрын

Bravo! A great idea that can be adapted to other miter saws!

@ShaneFix 11 ай бұрын

Brilliant! I just ordered for my DWS716, looking forward to trying it out!

@beechwoodchip8045 10 ай бұрын

I installed the insert and dust collector boot on my old DW715. It fit perfectly and works better than I expected. I used an inexpensive small Stanley shop vac with a 1.25" hose. I've been fighting with dust collection on my miter saw for years. I've tried several different DIY solutions, and spent far too much time and effort on it. This is the best solution I've tried, and the easiest! BTW, I'm not affiliated or compensated in any way, just a happy customer.

@redscortgt93 5 ай бұрын

Did you get the insert for the DW 716 to fit in the 715?

@deek3048 11 ай бұрын

I have a DWS780 compound saw. The one with the long tube in the back that people hate when they don't have a vacuum system. Dust still goes all over. Would be nice to find a better way but I don't think your system will benefit this model. I've tried to increase the "catcher' with rubber from innertubes but am only partly successful. Needs a better design. Your videos should be the standard for YT. Clear shots and concise info! Keep up the good work!

@kevincederberg2442 3 ай бұрын

I have the same saw and was hoping there would be a "fix" for catching all the chips and dust.

@fcschoenthal 11 ай бұрын

Huge market right now for dust collection on miter saws, but SOOO many different models. Don't understand why when you did a good job in the video explaining how and why they are different, but see that you're still getting fitment questions. Looking forward to seeing what you come up with for the 779/780 models. - Chris

@thecloneguyz 11 ай бұрын

ROSSEAU 0DUST HOOD

@Itslvle 11 ай бұрын

Simple but effective. Makes for less problems with it's simplicity and reduces cost. I hope you get a good solution for the 780 as well and ship to Europe. I would like to support a great guy with great inventions like that.

@thorshuatus 5 ай бұрын

Great work on figuring this one out! Now make one for my Delta Cruzer 12.

@paulhirst3548 11 ай бұрын

Thank you for doing this. Having decent dust collection on my miter saw would be great. Looking forward to the solution for the next model.

@thecloneguyz 11 ай бұрын

ROSSEAU 0DUST HOOD

@johnvodopija1743 11 ай бұрын

Simply outstanding! I will now consider buying another mitre saw knowing the dust collection problem has been solved. Top job. Cheers 👍😎🇦🇺

@carlnavigato68 11 ай бұрын

This is a great video! Terrific camera shot showing how the dust is directed. I just wish there was similar for my Bosch 10" miter saw.

@alanborack9256 11 ай бұрын

Your videos are a gift to the weekend/retiree who likes to tinker with woodworking.....I cannot wait for the Dust Collection System for the DWS 779/780. The saw is awesome but what a mess it makes even with a hood I have for it. After cutting up a few pieces, I have to take my shop vac and clean up in/around/under the saw which sits on a miter stand I bought with the saw.

@MCsCreations 11 ай бұрын

Damn, that's just brilliant, dude! Really well done! 😃 Congrats for the 3d printer! I bet you're going to love it!!! Stay safe there with your family! 🖖😊

@RUM123 11 ай бұрын

Awesome, was getting ready to ask about the 779. Good to hear it's in the works.

@davids8493 11 ай бұрын

Congratulations on the X1C. I just got 1 as well. Mind blowing. Good luck with your projects.

@extremewoodworker 11 ай бұрын

The insert looks similar to the Colliflower insert which is a good design. The below insert chute looks like a viable dust collection solution until you have to bevel the blade to an angle other than 90 degrees. If there is sufficient room to make the chute wider, it could possibly work for all saw positions. Steve

@grbggaming6885 4 күн бұрын

That is absolutely beautiful. Nice work!

@thesplinteredfinger 11 ай бұрын

Very nice research and solutions!

@tfields6364 7 ай бұрын

I just installed the bracket, the boot, and the zero clearance throat plate on my new DWS716. Your dust collection system was the deciding factor on my going with this saw over another brand. For less than a hundred bucks I solved the last big frustration in my shop. I hope Dewalt teams up with you on this - or at least sends you a big fat thank you.

@InspireWoodcraft 7 ай бұрын

@tfields6364 Thanks for coming back and leaving such an awesome comment!

@dmech5135 10 ай бұрын

Funny how some guy with all kinds of schooling and degrees is making huge money coming up with mediocre designs and here you come put common sense and practicality to work and perfect it. Great video and great work. May your skills continue to be blessed!

@bobp3738 11 ай бұрын

I don’t have that brand saw but love what you did here. Way cool!

@DavidFDobrzynski 10 ай бұрын

Holy crap! Today I received the parts I ordered from you recentLy and installed them on my DEWALT DW716 miter saw. Your creation is freaking brilliant! Life changing! I’m not easily impressed with stuff, but your solution to my sawdust problem is PERFECT. Thank you, thank you, thank you!

@EricMeyerweb 11 ай бұрын

Nicely done! Regarding the backlog, perhaps consider selling the 3D files separately from the physical products. That way people who already have 3D printers can print their own and not clog your production pipeline.

@jasonjames8555 11 ай бұрын

Personally, I'd love this. Gladly pay for your STL!

@jodilea144 11 ай бұрын

Great suggestion!

@rla1000 11 ай бұрын

So they can take his design and sell the 3D printed products themselves?

@jasonjames8555 11 ай бұрын

@@rla1000 It is not uncommon for designers to sell their STLs. If that is not something that he wants to do, that's ok. While I cannot speak for others, I would be printing this for myself and no one else.

@Connorkmiec93 11 ай бұрын

Yes, I would also be interested in purchasing the STL.

@bonedaddy996 11 ай бұрын

Your OCD approach to dust collection speaks directly to my inner hand-washer.

@nxstyn8 7 ай бұрын

For those that still have the plastic bracket up under the blade that he was referring to, dewalt will replace that for free with a brand new metal one. It's a safety recall! Will definitely be ordering this setup tho for my new saw! Appreciate all your time & effort put into this bro!! 👊🏼

@brucetaylor683 11 ай бұрын

Anything thought of for other brands Very smart idea !

@davidpeters8813 11 ай бұрын

This is brilliant! Gotta see if my miter saw can be adapted

@ChrisHersh42 11 ай бұрын

Nice work. I got the boot and ran into the plastic shroud magnet issue. Got it solved so all good now. Will get this base plate too

@silasgroenning 6 ай бұрын

Really impressing work

@cmoorhead1 6 ай бұрын

Excellent! I’d love to have a similar shroud and zero clearance insert for the DWS717

@foxhallww311 11 ай бұрын

hey Jody! Just discoverd you channel. Awesome work sir. I just ordered the shroud, zero clearnace, and the replacement bracket. Going to use it heavily on my channel. thank you and take care!

@joshweaver8806 11 ай бұрын

Make that style throat plate for the makita 12” and I’ll buy one today. Love that design where you can just replace the middle part. Genius

@dsly99 11 ай бұрын

This looks amazing!! Will this work on the older models with the slide bars that are horizontal?

@tonydavis6487 11 ай бұрын

Definitely like the idea of trying to clean up some dust from the Miter saw and finally someone is working on the Dewalt saws. Too bad I have the DWS780 though lol Still...great products!!

@clemoniii 11 ай бұрын

Yes, i didn't pay enough attention and bought one. Won't quite work on my 780. That's ok, I believe in supporting the great creators!

@thecloneguyz 11 ай бұрын

ROSSEAU 0DUST HOODS

@kevinrose8568 11 ай бұрын

Nice job, I never thought about the dust going through the bottom and all around. And I've never seen anybody else mention the dust through the bottom. Though, I have a DW717 so won't work for me, but I am sure many others will be happy with it.

@christianhull7999 11 ай бұрын

I apologize if it’s been asked before, but if you bevel the saw, wouldn’t it cut through the bottom dust collection?

@skippylippy547 11 ай бұрын

Love this! Brilliant. 👍

@ryanhagey3522 11 ай бұрын

This is awesome. Dewalt miter saws are terrible for dust collection. I'm absolutely going to get this.

@rickcloyd6390 8 ай бұрын

Great videos! I enjoy watching them and hope you decide to tackle the Delta Cruzer 12” miter saw in the near future. As far as I can tell or have seen, you are the only person interested in getting the sawdust that goes under the saws and spills out onto the floor. Best of luck going forward with your endeavors.

@splinters_66 11 ай бұрын

Magnificent solution, that dust can be a real saw point 😃

@therealmfwic9503 11 ай бұрын

Nice! Good job man!!

@thomasalison6188 11 ай бұрын

Great job!

@axion8788 11 ай бұрын

Why does DeWalt pay inept engineers when they could just watch your channel for free?

@tonydavis6487 11 ай бұрын

This is a portable construction miter saw, mainly meant to be used outdoors on construction sites. The priority isn't really collecting 100% of the dust to appease woodworkers using it in their shops. 🤷‍♂ Although, it would be nice if they made an effort to collect a little more dust.

@BigBrotherIsTooBig 11 ай бұрын

It's not the engineers, it's the budget for the engineers. 😉

@bigbrother9531 11 ай бұрын

Because they're made in china. Only know how to copy and steal. They'll copy and steal this idea.

@j.u.c.o 11 ай бұрын

Bean counters & project timelines

@johnfitzsimmons4893 11 ай бұрын

@@tonydavis6487😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😢

@BfreeBob 11 ай бұрын

Great solution! Wish someone would make this for my Metabo 12" slider. I love my miter saw, but it makes so much dust I usually have to roll it outside my shop to use it.

@jeffstewart7434 10 ай бұрын

Congrats on the success your zero clearance lower plate “trough” provides with improved dust collection. Will you be making for other brands? Would love one for my Makita 1019l 10” slider....

@DB-dj6zk 4 ай бұрын

I had to watch your video a few times and repeat at (2:36) and realized the insert can be replaced if needed and preserve the throat plate and the "boat looking thing". Clever.

@BobBob-eh5sb 4 ай бұрын

Well done, very creative. You don’t have to worry about me being in a hurry, as I don’t have either of these saws.😅

@SpringVinMoto 11 ай бұрын

You are a real Hero!

@bradleytuckwell4881 11 ай бұрын

Great job

@woodworkerchris1903 11 ай бұрын

This is fantastic! I don't have a Dewalt miter saw, but if you ever make and sell comparable pieces for Milwaukee's 10" saw, I'll order one right away.

@daifeichu 11 ай бұрын

That insert is a great idea especially with the replaceable piece that can slide in or out. I have the DWS782 and made an insert out of wood that goes all the way into the cavity so it does the same thing as yours. Problem with mine is, if I get a blade with a different kerf then it might ruin the zero clearance part. I still need to figure out dust collection with mine. The box I have built around it is almost like a shed. It's too big.

@attheworktable 11 ай бұрын

dude you are about to get rich i'm sure! Blessings to you and your family!

@richardspencer742 11 ай бұрын

Not much else to say, evveryone has called you a genius and thrown many much deserved co.compliments your way! My dinosaur DW706 likely wont work so I can not buy a set/bundle from you but ill definitley steal the concept and find something else to buy from you to say thanks!

@steveferguson1232 11 ай бұрын

Love that zero clearance with dust box. My only problem is I have the Metabo 12” dual bevel slider. Lol

@wharfrat360 11 ай бұрын

Don't forget the DW717, I'm dyin' over here!

@jimdenike8647 4 ай бұрын

This is by far the best solution I have seen. Very impressive! I have an older Makita DXT compound miter saw. Any suggestions on how best to mitigate the issues you solved with your solutions? I can't find anyone who is doing something similar for my saw and don't have a 3D printer and can't afford one at the moment?

@andrewbieger5004 11 ай бұрын

GREAT STUFF!

@NickConteSC 11 ай бұрын

You sir are a freaking genius! Time to do one for the Ryobi 12" sliding saw please!

@davidyeo4302 11 ай бұрын

Awesome! Can't say it any better.

@user-sq7fp7ew3q 11 ай бұрын

That looks like it works awesome. Will you be making this stuff for the Dewalt DW708 sliding miter?

@christo_creates 11 ай бұрын

+1 for the DW708🥳

@JasonPeltier 11 ай бұрын

That's an amazing solution! Do you have plans for the 12" Delta Cruzer?

@singingwhalesrock 11 ай бұрын

This is a great idea! Will you make it for other brands and models?

@thedumbassspeaks 4 ай бұрын

This is awesome! What manufacturers’ engineers don’t do, a woodshop engineer fixes!

@sergeygrunskiy462 6 ай бұрын

Fantastic. Can you make one for the Kapex?

@markgambrill 11 ай бұрын

Such a simple solution! I really thought you were going to design a dust port for the base of the saw until you produced the little bucket scoop thing. I have a completely different saw but will try to replicate the idea if that's ok?

@user-nx3zk5qi8t 11 ай бұрын

Genius! I have the the cordless version and I’m not sure why, but the dust collection has always been good compared to bigger saws. That’s my only guess. Less power, smaller blade. It’s good with the ct26, it’s almost non existent when hooked up to my Camvac with all three motors going

@SamWanamaker1 11 ай бұрын

You should make some of these cool pieces for the Kapex

@rvrpropertiesllc 3 ай бұрын

Cool! What do you do with beveled cuts? Replace the new insert with the factory one ?

@linsen8890 11 ай бұрын

I have the Makita 10" miter saw, and like just about every other miter saw on the planet, the dust collection is terrible. I'm going to see if I can come up with a throat plate for it similar to yours. It already has a soft shroud behind the blade, but it doesn't seem to work particularly well (maybe my dust collection system isn't moving enough air?), so I'm going to see if I can improve that, too. Thanks for this video; it's given me some ideas!

@colinjones6651 Ай бұрын

I love your videos, will your products fit my DWS779 saw?

@mattrinne 11 ай бұрын

You're getting so good at making these inserts and mods that you may never make a wooden project again! I hope that turns out NOT to be true...

@ronedelenbos272 11 ай бұрын

Brillant !!

@donwilliams3626 5 ай бұрын

I'm wishing you the best as you make improvements to a great jobsite saw. Are you planning to make simular products for other brands of saws? I have a Bosch sliding compound miter saw that could use a solution too.