The Issues With UniFi Cloud Key Gen2 Plus

No video

The Issues With UniFi Cloud Key Gen2 Plus | WATCH BEFORE YOU BUY IT

Рет қаралды 37,752

Күн бұрын

Hi Friends,
Today sharing with you my poor experience with the UniFi Cloud Key.
Even though it does work most of the time, it can be pain to use when it wants to and access to the camera footage can become very slow.
In this video, I get in details on the issues I have, the causes and the solution that I am going to implement in a short time.
==================
TABLE OF CONTENTS
==================
00:00 Intro
01:44 C'est Quoi le UniFi Cloud Key
03:26 The Issues with the UniFi Cloud Key
05:56 The Causes
08:08 The Solution
08:54 Conclusion
=================
LINKS MENTIONED
=================
UCK Installation Video: • #4: FortiGate: Basic C...
Home Network Playlist: • Home Network
===================
CCNA 200-301 COURSE
===================
Study for the CCNA and go from zero to engineer with this course:
kbtrainings.com/c/ccna-200-301/
=============
STAY IN TOUCH
=============
Email: contact@kbtrainings.com
Instagram: / kbtrainings
Facebook: / kbtrainings-6855822152...
Twitter: / kbtrainings
============
KBTRAININGS
============
Website: www.kbtrainings.com
KBTrainings is an online training platform created to share my knowledge in the IT. In a world where technologies are radically changing the way we live and future economies, KBTrainings has set itself the goal of popularizing IT concepts and allowing many to start or boost their careers in IT.
The contents range from basic notions and introductions to advanced concepts for engineers. We will cover the following areas: applications, networking and security, web design & development, programming and automation.
In computer networks and security we will focus on Cisco, which is a benchmark in the industry, helping you to get Cisco CCNA and CCNP certificates. These certificates are highly respected in the industry and are a very practical way to prove your knowledge and start or advance your career.

Пікірлер: 76

@KBTrainings 2 жыл бұрын

What do you think of the UniFi Cloud Key...? Please Like and Share. Thank you, Guy.

@CapsLock33 Жыл бұрын

thank you for explaining this! everyone on youtube only talk about setting it up. I want to know what the cloud key does and how it works. Thanks for the info!! I had to subscribe to your channel.

@xclusivereef5805 2 жыл бұрын

Can’t wait to see your review on the udm pro se when it comes out. I followed your videos and I also have the fortigate 60, 3560 switch and Cisco wlc/ap and it is rock solid. So thank you for what you so as it solved lots of wifi issues in my house.

@KBTrainings 2 жыл бұрын

Ah cool, that is good to know. Can't wait to get the UDM Pro SE.

@dumy13 2 жыл бұрын

I have one, it works fine, similar to an UDM PRO.

@KBTrainings 2 жыл бұрын

@Dacian, Great!

@realgrapedrop 4 ай бұрын

Thanks for the video, I see it has been 2 years. I recently updated my Unifi network and replace two older 8 PoE, SFP (Gen1) with the new USW-Ultra-60W which still covered the PoE budget I needed for several cameras and access points. I noticed responsiveness has been much better. Note several months earlier I also replaced the default 1TB HDD drive with a 2TB SSD, which also helped. Overall I am pretty happy with the CloudKey though hoping the Unifi Dream Router Ultra with the M2 drive comes soon. From what I saw in a presentation it will be similar to the new Unifi Cloud Gateway Ultra, but with an M2 drive and Protect installed.

@KBTrainings 4 ай бұрын

Yeah, an SSD in the UCK made a big difference for me too. And an M2 will be even faster.

@royalsaini8812 4 ай бұрын

Honestly, the SSD shouldnt have made too much of a difference. Since the OS is running on emmc, and ssd for storage for cams? Not sure 100% just thinking out loud.

@ITSolutionsNetwork 4 ай бұрын

How is it with the latest update? I'm considering buying it for my video tutorials.

@HinSela Жыл бұрын

What is the different between I install the controller on my Desktop or Virtual Machine?

@johnmcdermott6233 2 жыл бұрын

I know this is an old video, so just chiming in that the performance got a LOT better. But it's still not rated for a lot of cameras, especially g4-pros. I switched to a UDM-P and it's been great with three g4-pros, two doorbells, a Flex, and a g3-ins. Zero issues. But the NVR.... Yeah that's the way to go man!

@KBTrainings 2 жыл бұрын

Thank you for chiming in. You're right, since I moved to the UDM-Pro, day and night. And the new updates they have been making are improving a lot.

@romandavydov8684 2 жыл бұрын

thank you bro! for the honest review

@KBTrainings 2 жыл бұрын

You're welcome Roman🙏

@johnwouters9835 2 жыл бұрын

have you ever reset the uck and then been stuck on 'obtaining an ip address' frustrating paper weight

@giovanniyoung9854 Жыл бұрын

I need assistance with my UCK Plus. It's telling me that the power plug is bad but it's the same one that we've always used.

@11m0 11 ай бұрын

High quality videos. Keep it up

@UK-Expat-in-USA 2 жыл бұрын

I just added an Ubiquiti Cloud Key Gen2 Plus yesterday, and trying to access it locally (I have a 1gb Network) is almost impossible, that I am forced to login to my cloud account to manage it - I am hoping it is a firmware issue that they can update - For security cameras and my alarm system I went with the Ring ecosystem as they have cloud recording, camera notifications and I can access all my camera anywhere in the world, plus if my alarm goes off all the cameras start recording. Thank you for your video on the Ubiquiti Cloud Key Gen2 Plus I thought I was going crazy when I could not connect to it.!!!

@KBTrainings 2 жыл бұрын

Hey Mr Magoo. Happy new year. I also hope a firmware version will fix the issues. I changed my disk to an SSD and it seems to help a little. Thanks, Guy

@HIDAYATKHAN97 Жыл бұрын

Hey, Thanks for your Video, I just installed my personal HDD by mistake, but unfortunately I lost some of the DATA, could you please let me know where that DATA gone? Since I just connect it with the Power and PC , not with Ethernet. Could you please help me,

@pabloaraya8442 28 күн бұрын

Hi, I hope this message finds you well. I am in the process of installing a WiFi network using Starlink and need to distribute the internet signal through 13 Ubiquiti U6+ Access Points. For this purpose, I have purchased a USW-Pro-24-POE (400W) switch. However, I am uncertain if this equipment is sufficient to unify the network efficiently. Could you please advise if this switch is adequate for my needs or if I require any additional equipment? I appreciate your attention and look forward to your response.

@sawamarcandre4115 2 жыл бұрын

Thx for your input

@KBTrainings 2 жыл бұрын

You're welcome!

@congoparrot 2 жыл бұрын

I have two UCK 2Gen at work and at home for about 7 months (9 cameras at work and 5 cameras at home) I have had zero issues, I have not seen it not load as you have. what lead me to your video is I want to know how to record live video on demand like I can with my ARLO camera system. I don't think I can which is a feature I would like to have. do you know if this can be done?

@KBTrainings 2 жыл бұрын

Hey Don, All I know is that you can do motion activated recording, I have that set up on some of my low traffic area cameras. Not sure how the live video on demand works, but with the motion detection, I get all the interesting footage I need. Thanks Don!

@audreympp9305 2 жыл бұрын

Thank you for the video

@KBTrainings 2 жыл бұрын

Thanks to you!

@ronaldnaeyaert3653 Жыл бұрын

I just replaced the Cloud Key Gen 2 Plus and USG Pro with the Dream Machine SE. The old stuff was in use for two years and has worked great, no problems supporting 8 cameras, 3 APs and multiple siwtches.

@adnan.alagic 8 ай бұрын

So in your opionon, can a Cloud Key G2 Plus easiliy support 2 x AP U6 Pro and 6 x 2k G5 Bullet cameras ? What do you think, is the disk fast enough for the cameras ?

@KBTrainings 8 ай бұрын

You should be fine with 2 APs and 6 cameras. I would install an SSD... A lot of people don't like the idea of using SSD for Cameras, but it worked fine for me for months.

@adnan.alagic 8 ай бұрын

@@KBTrainingsthank you for your response. I'll probably do it exactly like that and I'll buy a ssd.

@KBTrainings 8 ай бұрын

You're welcome!

@travelertrini Ай бұрын

@@KBTrainings True, but SSD are sooo much more expensive than the SATA drives..

@Merit3162003 2 жыл бұрын

I have the same issues. But since i rely on Palo Alto as my firewall, probably will upgrade to NVR for protect and leave the cloud key as a standalone controller

@KBTrainings 2 жыл бұрын

I also started thinking about the UNVR... Not happy of the prospective of leaving the FortiGate, we'll see. Thanks Anon!

@Merit3162003 2 жыл бұрын

@@KBTrainings Yeah I have dual WAN on my Palo and i can not do selective, policy based routing with UDM. I also have my firewalls in HA and UniFi does not have any of these advanced features. Maybe you can put the UDM Pro behind your fortigate and just use a transit /30.

@andrewwebb9249 2 жыл бұрын

@@KBTrainings UNVR is the right move here. Use UCK for network only (or maybe talk too), and UNVR for Protect. You retain flexibility on your routing/firewall options, which is best. This is the setup I moved to after trying to run Network + Protect applications on a UCK - even with only a few cameras. The 2.5" HDD is going to struggle for Protect. An SSD less so, but moving to UNVR is what you need for more than 1/2 cameras really - especially with continuous recording (as I do). UDM Pro gives you more processing power and a larger form factor HDD, but its still a single drive, and isn't the right solution to Protect scalability. With the UNVR you can run multiple disks in RAID (I recommend RAID 10). Put some nice fast disks in there, and you'll enjoy the scrubbing experience much more than you ever will on a UCK...

@logan594 2 жыл бұрын

I had similar issues, I think it was having some sort of overheating issue. I literally plopped a heatsink on top of it and haven’t had an issue since.

@KBTrainings 2 жыл бұрын

Wow, good to know!

@arifyousuf1695 2 жыл бұрын

So do I need UCK-G2-PLUS to manage and setup my UniFi AP and UniFi Switch?

@KBTrainings 2 жыл бұрын

Yes you do. Or you can install the software on a windows computer or any other option. It needs to be up 27/7

@Volnodumez63 Ай бұрын

Is it possible that cloud key 2 plus is used as a backup DVR, or is this a regular video written on dream machine pro se?

@KBTrainings Ай бұрын

I don't think it's possible to have a backup DVR with UniFi, unless it's a recent update

@egenethebest9107 7 ай бұрын

You can host the Unifi network controller yourself on your own hardware. I will run really well even on low end hardware. You were also able to host Unifi Video yourself, however ever since the move to Unifi Protect you have to use their hardware (unless you want to do some tinkering). I also find the protect hardware kinda weak, and would really prefer the option of buying a licence and hosting it on my own hardware... I have several UNVRs stacks as well as several standard UNVRs, and UDM pros. The number of cameras you can put on even the highest end stacked UNVR is not that many in the real world which is a big bummer (unless you want to really lower the recording quality)

@KBTrainings 7 ай бұрын

Nice! I just installed the UNVR too.

@nicholaslacovara2381 2 жыл бұрын

I agree with you. I have 12 switches and 11 APs. The cloudkey Gen2 has had issues handing out IP address’. Plus had the same issue as you. I upgraded to Dream Machine pro. Hoping those issues do not reappear.

@Kidzclubflix 2 жыл бұрын

I would upgrade the 1 TB HDD that comes with the device to a 2 TB SSD. Problem solved. You have a fairly large set up as far as cams goes.

@EsotericArctos 2 жыл бұрын

I am watching this 6 months later, Honestly you would be better using Unifi Controller on a Raspberry PI, Windows or Linux PC and get the Unifi NVR for your cameras if you must use Unfi Protect. UDM Pro / UDM SE runs the same software and operating system as the cloud key and the same sort of bugs may come across, nto to mention they still have a low camera limit. An even better option would be forgetting Unifi Protect and putting the cameras onto a different NVR application. Protect really is still lacking in the feature end of things compared to other solutions. I went with Blue Iris for NVR, Raspberry Pi for the Unifi Controller. It also allows me to keep my own PFSense based router.

@KBTrainings 2 жыл бұрын

I see. Since I moved to the UDM SE, my experience has improved dramatically, not a lot of complaints. Still observing and will probably get an NVR. Will look into Blue Iris. Thank you Brandon.

@leotoussaint8872 Жыл бұрын

@@KBTrainingsHow is viewing the cameras remotely on the UDM SE?

@shadow.banned 2 жыл бұрын

Kind of sucks that major design flaws coerce upselling to more expensive products. They should just fix the CKG2+.

@OTCRSA 2 жыл бұрын

😎👍🏾

@FYDanny 2 жыл бұрын

for CCTV you should exclude from UCK and use other NVR. UCK not power enough to support multi task. I use Sophos as Firewall and UCK just to handle 5 AP and 3 switches. CCTV I use HikVision. 5 VLANs on my network. and the result wallahhhhh...

@KBTrainings 2 жыл бұрын

You're right, the UCK is very limited. I just changed from the UCK to the UDM Pro SE and the experience is way better.

@laminetoure9235 2 жыл бұрын

👍

@KBTrainings 2 жыл бұрын

Merci beaucoup LAMINE!

@mikescott4008 Жыл бұрын

Cisco CBS with CBD is where I’ll be moving to.

@lmplusmke 4 ай бұрын

NEED HELP!!!! Something happen to my cloudkey and is off line even though it is connnected and i have internet access... all my cameras are off too...

@KBTrainings 4 ай бұрын

What steps have you taken...m Reboot...? Unplug it and let it seat for a moment and plug it in.

@lmplusmke 4 ай бұрын

@@KBTrainings yes i have done that a couple of times... i have also updated the software i will send you a pic of what im seeing...

@lmplusmke 4 ай бұрын

@@KBTrainings kzfaq.infoanTYQCUxdwY?feature=share

@KBTrainings 4 ай бұрын

Your video is private, I can't see it. But anyway, if the reboot didn't fix, not much can be done from my end. Just make sure you have connectivity on the switch port you're connected to, try to replace it with another device or swap the cable... if your connection is fine, the device might be toasted, i don't know. It's an appliance, it can fail for no reason, and it happens all the time in production. Good luck.

@bullishkrypto 2 жыл бұрын

If you're running 4K cameras you can't put many on there, like maybe none haha. Use a NVR if you have 4k and stick to under like 6 max 4K cameras per NVR.

@KBTrainings 2 жыл бұрын

That is the thing. I hope the UDM Pro SE I am about to install will do better.

@Jav202x 2 жыл бұрын

It used to be good but every time you update it becomes in a nightmare, specially if you are far from the physical place

@KBTrainings 2 жыл бұрын

I hear you. Especially if you're not onsite 🙂. The UDM SE is servir me better.

@Steamerbeen 11 ай бұрын

Thats bad dev.

@carvedwood1953 Жыл бұрын

Well I have to say I am hoping I disagree with you on the cloud key because I definitely disagree on the Windows installation. I find that the controller installed on Windows isn't very good. Was really hoping this would be an improvement.