I have an Edition 100 Turbo with exactly the problem highlighted. I have owned the car for 10 years now. Followed your guidance and can honestly say the difference in the car is nothing short of sensational. Smoother, more power, better MPG. It now feels the 330bhp it should be. Thank you

That bridge at the start was where they did the great train robbery!!!

What a treat to see this video I've been dying to see what's happened to it I wish you could get your hands on my VXR Zafira B BOOST bus

Iv been subscribed for a while now, watched quite a few of your vids. Iv never seen anyone do such a good job in absolutely everything. Nice work mate

Great work and video as always 🙏 have known about the earth mod on these for years but neither my Sri turbo or gsi have had them done yet so great to see a guide from the zlet guru on this repair for future reference so massive thank you for showing this 🙌👍 Also love the driving clips really love the sound of a Nicely modded zlet 👌👍

There is no reason why anyone should question you or what you do, I don’t think there’s anybody on the planet that knows more about vauxhalls than you. Would be great to see some more footage of the cars on the road they sound savage 👍

This is actually the TIS repair for the field action 2006. This will help people no end 👍🏼 I done this repair myself and it makes a huge difference. It’s highly advisable for anyone with a Z20 Astra to do this repair!

Great video Aaron, amazing work as usual,your a master at what you do👌👍😀

Brilliant Aaron 👌. The build on my SRI Turbo is coming along. I’ve managed to get a low k LEH for it too. It’s coming from Sydney next week. Tshirt arrived also, great quality!

Had problems with my zafira gsi. After watching your video I check my injector loom to find a broken wires going to the maf and the map sensor wasn’t plugged in. Only had the car a week and didn’t no it had that much power. It’s like a different car. Thank you for the great video has helped me sort my car

Loving the vids aaron

Inspired as always...thanks.

Honestly wish i could get you to help build mine. Hiding the loom the detail everything you got alot of knowledge my friend 😎😎🤟👊

Nicely explained videos, thanks

Boss as always 🔥 🔥

Been looking into this prefect video mate 👌 Is this a good thing to look out for on a astra h vxr aswell? Or are the looms done different Thanks in advance 👍

What a brilliant channel Aaron superb m8, can I ask what shade of green you used to paint your brake lines on the red Astra as I’m restoring my old Audi 80 sport n would like to paint them before they go back into the engine bay cheers 👌👍

Love the black hoses clean oem ++

Great job arron does the z20let and the z20ler have the same loom I've changed most of the sensors on my astra h Sri turbo but it still seems to be over fuelling if the looms are the same I'll have a look at the earths

Nice Job Aaron looks good... say the rear brake pipes are next up for it?

Hi do you a video on how to wire up the aftermarket fans

Aaron do you do private work? Need your Vauxhall experience

A lot papers say to not use solder on ecu wires.

Aaron mate do you do the rear boost solenoid bypass on you engines

Finally

Hi mate you work on other cars got a corsa c z20let causing me a headache same issues but it's had a earth mod .

Really useful video, I’m working on a lotus evoura with the z20let lump in. It’s running poorly and the data on the opcom is weird too. The barometric pressure is 50 kpa and the battery voltage reads 8.9 even though the battery is over 12v. Could this earth problem cause this? Any thoughts would be appreciated, thanks.

Nice job on that loom! I know I would have been looking left and right to find what was wrong if I had to sort that out lol. Good shout on the V power I use it in my bot standard 1.6 diesel and it does make a huge difference to the way it runs, not so much power in it because it hasn’t got much anyways but it doesn’t detonate like normal diesel so I don’t get a rattle under acceleration. I think mine needs carbon cleaning or something like that but the v power does help it so I just continue to run it on that and it’s happy.

Could really do with your help on mine mate im unsure what my readings are meant to be on opcom but my cars running lean and ive just changed the engine as it melted piston 3 in the last engine

I'm sure the silver GSi is my favourite. But if the next video is the RS turbo I'll be like nah this is my favourite, then next week you'll maybe hoy up an Evo5 vid and... well you can see how it goes. 🤔😂

Would you reckon i'll solve the boost problem with this repair ? Keep getting p1106-9 after changing the MAP and the boost solenoid valve ..

has the astra vxr the same loom problem?

Any idea where to get a decent opcom device. I have had 2 and both have eventually failed.

How must the Maf sensor extension be done? Soldered or but connectors?

what's the correct colour to each pin on the maf sensor ?

Does the z16let have same problem

Yes!!!!!!!!! Shit day made better. Finally

Aaron, I have to ask do you have a small family and a full time job? reason for asking I would love to have the time and dedication to invest in the projects that you do. Love the channel and well structured commentary. Dazzler.

Aaron how did you stop the fitting on the turbosmart actuator from moving??

Random but what’s you’re opinion on running a catch tank on the Z20 engine ? Worth while or not ?

Aron when you going live so you can answer questions from us 🤔

Where can i get the same blue led speedo bulbs from. The blue ebay ones i have are dim

Ever considered a vx220 turbo?

First comment ! Good work mate

Aron part number for fuel filter is gm 25313359

I have a maf problem which I can’t for the life of me find. Any chance I could email you? And see if you have any ideas

I enjoyed watching this, could you have a look at my upload bro and see if you know what could be the problem with mine? Lol I’m clueless