I need to pin this comment, yeah its been said before and I cant believe I didnt think of it! Cheers Homer 🍻🍻🍻

2nd this reply. I've been doing this for all sorts of tasks and it works great. You just need all the domino bits for the different diameters.

Thanks dude, do you know he didn’t even say thank you. 🤨

Thanks dude, nice of you to take the time to say, much appreciated mate. Hope you had a wicked weekend 🍻🍻🍻

Thank you Chris, much appreciate the heart felt compliment!!! I hope you’re having a nice weekend! 🍻😊🍻

Thank you Ken, that’s nice to hear all I hear is “I can’t understand you!” mostly some get pretty angry about it too, such as life. I hope you had a lovely Christmas! 🍻😊🍻

Cheers dude, I’ve had some pretty shitty comments of late and this has cheered me up! I hope you had a lovely Christmas! 🍻😊🍻

Welcome aboard 😁 you’re probably find a vid or to of me rambling 😂

Thank you for the lovely compliment, I hope you had a wonderful weekend!🍻😊🍻

Haha for sure, I’d have that in my living room! I have to put up with IKEA 😂 Merry Christmas! 🍻😊🍻

Thanks buddy 😊

Thank you, I can confirm it gets beat on not babied 👌

Trouble is with siblings they can also be brats 😂

Thank you Emerald hope you had a lovely weekend!

Thank you, you’ve really made me smile I don’t smile often! Sending a virtual hug! 🍻😊🍻

@Hew & Awe (Ben) Cheers Ben, I'm so chuffed I mad you smile. At least I've done something right for once! 🤣 Big virtual hugs back. 👍😉😆😎

Thank you Jon for the lovely compliment! Hope you’re well!! 🍻🍻🍻

Thank you JR! Appreciate the compliment mate!!! Hope you have a lovely Christmas! 🍻😊🍻

Cheers buddy! 🍻🍻🍻

Hahaha thanks Paul!

Thank you Isaac, thank you for the lovely compliment! I hope you’re well! 🍻😂🍻

Thank you Derek! 🍻🍻🍻

Thank you buddy 😊

I don’t see the crappy comments these days, mostly i ignore them, I won’t lie they do play on my mind for a few days though, what I’d really like is them say it to my face that wouldn’t end well for them!

Cheers dude, I wouldn’t mind one myself 😂 I wonder what a bench like that would sell for 🤔

Thank you David! I was the same with my bench but soon got over it after all it’s a tool too. I tried mdf and spilt a water finish and it was toast after! I’ve tried ply to but I could’ve bothered with the swapping of the tops and lining up the dog holes either.

@@HewAndAwe In my woodstore I have a heap of unassembled ash fire door frames. They are thick and chunky and have 'workbench' written all over them...one day I'll get round to it....

you should do it. as soon as you've dinged it up a few times you remember it's a workbench. My workbench still looks good after 20 years, well worth the effort : )

It’s a long build for sure, I’m in no hurry to build another just yet.

Thank you DWB I hope you’re having a nice weekend! 🍻😊🍻

That’s no way to talk about my ex 😅 Merry Christmas! 🍻😊🍻

Thank you James! 🍻🍻🍻

Thank you Nicholas! Hope you’re having a nice weekend! 🍻🍻🍻

I don’t seem to get on with forstner bits what ever speed I use.

Cheers dude, appreciate the compliment mate!! 🍻😊🍻

I bet the subtitles were fun! Subtitles can’t decipher slang. 😂

@@HewAndAwe 🤣

Thanks buddy! 😊

Cheers Sam! 🍻😊🍻

Thank you Bustin! 🍻😊🍻

Cheers dude! It’s broken in now with a lovely circ saw cut oops! 😂

Yeah I can, nice to get it right with out any aids though don’t you think?

@@HewAndAwe @13:11 Not really bro, your chisel skipped over the next line because there wasn't anything preventing it. If you're sculpting something yea hands only is probably best for the process. but cutting a line should be mint.

Thank you Tammy, he’s not that reactive, but he had seen it being built along the way so I put it down to that. 😬

We’ve all been there dude! That’s the right of passage 😉

Thank you Job! Thank you for the compliment! I hope you had a lovely Christmas! 🍻😊🍻

I would of liked to of seen some emotion from him but no, I don’t remember him even saying thank you. 🤨

Thanks mate! Appreciated the compliment, hope you had a nice weekend! 🍻🍻

Thank you J, I hope you’re having a great weekend! 🍻😊🍻

Thank you Mark! 🍻🍻🍻

Must say I am very jealous!

Thank you Paul for the compliment, thanks for taking the time to comment too! 🍻😊🍻

Did I not say that in the video, correctly myself later on in the vid? Maybe wrote in the vid description on one of the vids…

@@HewAndAwe You did correct yourself and said crubber - I was just pointing out the origin of the word.

Are okay Gotchya 😊

Thank you Greg! Appreciate the compliment mate! 🍻🍻🍻

That’s been said before yeah that’s a very good idea and wil be exactly what I do from here on in. Max depth is 70mm

He’s over 6’. It was funny he bought a bench off eBay even had the old wooden screw thread, when it was next to him it looked knee height 😂

Cheers Suj! What’s happened, seems you’ve gone quite on the Tube?

@@HewAndAwe haha.. thanks Ben, nothing serious, just busy at my actual work, and travelling during this time. My youtube watchlist has now over 200 videos, so slow in catching up. I have a few projects recorded, but will probably start the edit in Sep/Oct. And frankly, I'm in no hurry for that either, as there are not that many views on my new video's anyways, lols!

It sure is tough to get views, I feel KZfaq would rather we post shorts… 😞

@@SujMenon consistency seems to be key mate, youtube doesn’t like it if wee take a week off 🤦🏻‍♂️

She’s a beauty eh! 🍻🍻🍻

Thank you Marlow, appreciate your compliment mate! 🍻🍻🍻

Thank you David for the comment much appreciated! I hope you had a lovely Christmas! 🍻😊🍻

Thank you Jim 😊

I know maffell make the guide rails for Bosch so they’ll work for sure, I’ve heard the festool do and evolution but don’t quote me. I don’t have the Bosch so so not the best person to ask. There’s a few Bosch facebook groups worth joining! I’d strongly suggest the Bosch maffel guide rails as they’re the best on the market certainly from the connection system point of view!!! 👌

@@HewAndAwe yea a saw they seem good was just the bloody cost of them. 700mm from Bosch is like 80 quid but look at say evolution it's like 50 for 1800 and festool think can get 2 700mm for about 70 quid but I'll look about. Plus with the Bosch from what ave seen you need buy all the connectors and clamps all separate great having saw without the bloody rails. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@michaelwillson6847 the biggest issue with rails is the connections only the Bosch works.

@@HewAndAwe yea am hearing that and the Bosch connection parts ain't cheap. Although someone is telling me Makita track works not sure if it's true.

I gotta be honest Paul, I dont get it when peeps say that, Id be chomping at the bit to use it! All that space for more than one project and space to have a banquet at the same time 😂 Hope youre well Paul!!! 🍻🍻🍻

Cheers Chris! Hope youre well fella! 🍻🍻🍻

Thank you Karl, hope you’re well mate! 🍻🍻🍻

That’s so shit when that happens I’ve been there enough times to really think hard of other options!

Thank you Ed! 🍻🍻🍻

Thank you Stuart! I want one now 😬

Cheers dude! Hope you’re well! 🍻😊🍻

LMAO I asked in a facebook group cause my usually supplier seemed to of gone belly up, no one answered but found more on Ebay.

Thank you. There these - amzn.to/48UD7FJ 👍

Hahaha cheers David! 🍻🍻🍻

I think you mean boab? MOAB means mother of all bombs hence the capital letters, I just played on the term.

@@HewAndAwe Oops. I meant boab lol!

@@HewAndAwe If you were in the Army you'd be a General!! But you're of greater use to Mankind out in the open wild.🤣

Thank you, thank you for the compliment!! I hope you had a lovely Christmas! 🍻😊🍻

Here you go bud, KLYNGTSK 10 PCS Push to Open Magnetic Push Latches System Damper Latch with Screws, Patches, Glue Drops Door Catches Drawer Push Latch Kitchen Door Push Release Latch for Door Drawer Cabinet amzn.eu/d/iQ3B7sn

Thank you Andrew for the compliment! I didn’t go through them as I had in a previous bench build the one I made for myself. They’re push to open cupboard catches. YUOIP® Push to Open Door Catches Magnetic Latch Open and Close The Door with a Single Push(10 Pack) amzn.eu/d/a6lfSTH 👍

@@HewAndAwe that’s a cracking idea thanks for the reply.

I have horrible visions of other things when I say that 😂 I hope you had a lovely Christmas! 🍻😊🍻

Thank you! 🍻🍻🍻

Yeah he is, last I saw it had a cover protecting the top, me I would just crack on!

@@HewAndAwe but you'll have to now build yourself a bigger and better one!! Maybe go down the Dainermade laminated route? A workbench made out of recycled skateboards or something really unusually shaped? A man of your talent and ingenuity could come up with something spectacular? IMHO

Maybe one day, what I’ve got works but would be nice to have a bigger top so would need a bigger workshop 😬

Cheers Gary! I’m not sure about a month, the ageing kinda throws off the time it took. But I’d guess a month plus.

Soft wood absorbs the blows she said that it's no good for hand work...she needs a fella that's got some good hard wood

Perfectly put Jon 😂🤣😂

Thank you Rod, yeah they’re push to open catches - KLYNGTSK 10 PCS Push to Open Magnetic Push Latches System Damper Latch with Screws, Patches, Glue Drops Door Catches Drawer Push Latch Kitchen Door Push Release Latch for Door Drawer Cabinet amzn.eu/d/6cvUE0r

Cheers mate, usually it’s about 3 hours per minute of finished film but this one I’d say well over a hundred hours as there’s 8 edits 4 portrait and 4 landscape one of each the full edit.

@@HewAndAwe Epic indeed! Bloody awesome! (as a brit-yanks saying😜). Be well mate.

@@stavros_katsopr m

Look up his reply to Rod Potts above- he gave a detailed reply. There's even a link to the Amazon site.

Thank mate! There’s a link floating about in the other comments bud 👍

@Hew & Awe (Ben) Hi there Ben, To be honest I was hoping for a reply from you to MY comment. I'm a cabinet maker by trade, worked in Paris, France, as well as Brighton. The workbench is an iconic tool. I have worked on more than one in my time (64 years old at the present). SO many people work on crap work tops. It's literally unbelievable. Custom-made models like yours are few and far between. I personally couldn't build anything near it, despite the fact that I worked for crowned heads. You are just as much a mechanic as you are a wood worker- you've proved that. That's what it takes. Hats off for this one. However, it wouldn't fit just anywhere.

What comment mate? I’ve answered every comment KZfaq have showed me either in notifications or the comments section 😬

@Hew & Awe (Ben) Hi there Ben, No worry, it seems you answered it. It was about the 1st comment I made to you. Absolutely insane workbench. Hats off. A real masterpiece. Do you know about the Scott Landis Workbench Book? There are pretty insane ones in there too. The only worthwhile market models are the Ulmia (German), and the Sjöbergs (Sweden). But yours takes the cake. Thanks for sharing. God bless. Ralph

Yeah it’s been said and I can’t believe I’ve never thought of that! 🤦🏻‍♂️

Morning Jim, Its an old Engllish proverb meaning that if do not rush or if you avoid being too hasty, then eventually you will achieve your goal - in other words, be patient. 👍

Haha! Thank you fella, I hope you had a lovely Christmas! 🍻😊🍻

I’d imagine still water tight 😆 you’ve lost me on the button, was a while ago this vid?

It’s 2m long 1m wide, he’s a tall one, over 6’ I think he would of liked it taller too! Thank you for the compliment too! 🍻🍻🍻

I get asked that a lot. His work flow I guess, and to be honest I would like one that big now, must be nice working and not having to clear space for something.

@@HewAndAwe Now really would there ever be enough horizontal surfaces for a shop?😂😂😂😂😂

@@virtualfather in the land of the free I’m guessing so 🍔🌭🇺🇸

Is that what I said? No was 2m by 1m.

@@HewAndAwe You didn't say it but it was captioned at the end. Thank you for the clarification.

Thank you buddy 😊