Those musical targets are freakin sweet Louis!

Volquartsen is one stand up company. I have only good things to say about them. I bought a product of theirs for my Ruger 10/22 a while back, and I was having some issues installing it. I thought it was issues with the Volquartsen product, so I contacted them and they promptly sent out another. When I received the new one, I was still having issues with it, so I contacted them again. So they sent another. Right after they mailed the 2nd one, I realized that the problem was with the 10/22 and not Volquartsen's product. They treated me like a king and I can only reccomend them. I appreciated what they did soo much, it was really darn cool of them to sent me 2 more products, no questions asked. I felt absolutely terrible for this whole situation. I feel the only way I can pay them back is to show them the love they showed me and recommend their product. Their products are top notch!

As someone who enjoys piano a lot Those chime targets are freaking amazing

Loved your ethical devotion to diplomacy... You would not allow yourself to say that shooters with an 'Average skill-set' may have problems with the 3" barrel. LOVED watching you shoot. You and Hickok are now two of my favorite KZfaq 'pew-pew' channels. Just discovered your channel and subscribed.

Very cool! Volquartsen is top notch quality. I've built several MK series with their frames and bolts. Mainly opt for TacSol Pac-lite receivers. Going to look further into the mini mamba.

Unbelievable how your english is easy to understand even for a not english speaker listener. Thank you also for this!

I rebuilt my Ruger Mk 2 Gov't moel...8nin bbl...with all Volquartsen internals back ca 1994 or so...nice smooth & lite trigger pull...put a B-Square scope mount on it along with a Tasco red dot...used it originally for bowling pin head shooting competitions..excellent stuff...

Been following you for quite some time enjoy your videos. Other day at Walmart I spotted 2 boxes of CCI mini mag in the 100 round boxes in an otherwise empty ammo case. I must have guarded that case for 10 minutes before an associate finally came by. You get to have all the fun!!! Oh well, I realize it's a tough job but someone has to do it!!

Thanks to 22 plinkster for good videos, also for being a good role model to our young shooters. Gentlemen and good men & women are what is holding our heritage outdoor sports together. God bless you and your family and thanks for being a good man( and a great shoot). Keep it up and stay safe & healthy 👍🇺🇸🙊🙈🙉

I want to thank you for your channel, it inspired me to get back to 22lr shooting. I just watched your video about CF and it touched my heart. My wife passed from CF in October 2017. Thank you for what you do to inspire more shooters out there. Can you do a video on a CZ 457? I have a new thumb hole setup and curious as to what you think of it. Thank you again.

I love the musical steel plates! "Do Re Mi Fo So La Ti Do" 😁 I never seen that before, cool👍🏾

I never knew that I needed a supressed 22 and a "musical target" until this video

Absolutely need to have this.

Very nice pistol. The High Standard pistol is also a fantastic supressor host. The barrel swaps in seconds.

What can I say, it's my job and I love it...wow. Thanks for bringing some fun into the lockdown

On a greasy door knob is how we finished it... Love your show brother.

As usual, another wonderfully informative video. I really enjoy watching your videos brother. Thank you.

I had one chopped down custom a while back, VQ will do it right for sure though!

Thats really nice. Even without the can it looks sick too.

Being in a country that's against shooting sports, and lacking the capital to pursue them, I gotta say I appreciate you using that ammo for us to watch.

Man the pain !!! 22s going down sooooo fast...LOL Nice, God Bless ( us all )

That is one my favorite saying from you. “Minute of squirrel.” 🤣

"Slicker than snot on a door knob" yup going to remember that one for the rest of my life.

The smile is borderline uncontrollable on your face. You are child level happy with these guns.

Very nice addition for sure, but for me I would prefer the. 4 1/2 inch version...hope to have one some day, maybe when ammo is readily available.

So flipping casual at 100 yards. Respect..!

Cool thing about a 3" barrel is you have more subsonic ammo available than you do with a longer barrel since ~1200fps - ~1250fps rated ammo out of a rifle should exit this barrel around under the transonic barrier of ~1130fps.

What a piece of beauty ... love, love, love that pistol!!

Love my 6" black mamba. Works awesome for steel Challange.

Nice little plinker.. All though a 3" pipe in a .22LR makes pretty much all .22LR ammo subsonic so..

Well, this explains why they would not cut my barrel down when I ordered my regular black mamba last year, despite advertising those same services on their website. Hey! Let's just get them to buy another pistol at 1400 in 6 months when we release the mini! Does the mini also sound like a babby rattle when you shake it? Whew! I feel so much better after typing that out! It's almost a cure to buyer's remorse. BTW, I still like the pistol despite all of that. :p

Bought a volquartsen extractor for my 10/22. Wouldn’t eject reliably. I called them up and they sent me another for free and haven’t had any issues since👍

Great video. Question. What are your thoughts of mounting the Red Dot to the rear where the rear sight mounts? Is it more accurate or easier for target accusition were you have it mounted on the picatinny rail or to the rear? Thanks in advance for your time and efforts.

I don’t like the polymer frame for 1300.00 bucks

Can't wait to hear the MSRP. I'm going to guess $1495.

That's very nice, almost as nice as my threaded BOBCAT. good review.

"Slick as snot on a door knob" ... I love it!!! ❤️

Looks so cool would love to get my hands on one

Good time to buy one now that the mortgage rates are low

Wouldn’t it be easier to reload with your left hand if the mag pouches were on your left hip? Just wondering Cheers

HOLY bear droppings! This guy is better with a pistol than I ever was with a rifle!

So, I've got a Tacsol Upper on my old Ruger MK II. I use a Gemtech Outback IID. I recently swapped the stock trigger for a Volquartsen, and I'm getting some FTFeed issues with lighter (subsonic) ammo. I'm not sure what I've done. Any suggestions? Also, Plinkster, what do you recommend for a good, budget-friendly Red Dot Reflex sight for this setup? Do you like that little Crimson Trace that you've got on your Mini Mamba?

No you ain't worried about ammo I remember seeing that picture of the whole pallet that you got in. 😂

Volquartsen: We take existing firearm design and make it stupid expensive.

That’s sweet! Nice job on your video, I’m gonna check the price on one!

The mini mamba with a dot sight and the full size (4.5in) with a pistol scope. Talk about putting the challenge back into "ground squirrelling". A fun challenge, for sure.

looks like a pretty kickass 22

i love this gun , thanks for the video bro

It does look pretty slick.

For your next rifle review you should do the Ruger American Rimfire Long Range Target. From what I can tell it is a pretty accurate budget precision rifle.

Love the small size. Great shootin!

One of my favorites!

hey I'll be waiting for the new tx22 competition review, been looking for a 22 that I can put a dot on, without dovetail mounting it.

If the 6" barrel with suppressor is 20 foot long, then I guess the 3" barrel would only be 19ft 9" 😁

Was anyone else waiting for him to take the suppressor off just to hear the difference?

These are beautiful and I really want one now, like if I’m getting a .22 pistol that’s what I’m getting

Love your 22 magazine holster. Who made it?

Mad maccs precision has something similar, can you review that as well?

Back in the 1970s there was a 45cal. fully automatic select fire (three rounds full auto) pistol out of South Africa called the Black Mamba. This gun was so fast that it could at full auto put 3 rounds into a 3in. circle at a ridiculous distance. (i don't remember it was a long time ago) And at a rate of well over 1000 rounds per min. (if not limited at 3 rounds per trigger pull) (again I don't remember the actual rate) Based on the standard 1911 action but pushed to its limit. I believe that it actually had a few less parts and was made entirely of 440 steelSo a little heavy which helped its recoil in full auto. Don't know what happen to it I've never heard of it sense then. At the time I read about it in an old Soldier of Fortune. And I believe it was long rounds and not ACP. Put I could be wrong again and it was ACP. Would make more sense because it was handle clip feed,.

Where did you get your magazine holder on your belt ? Keep up the great work

with standard velocity and with hi-velocity, CCI, what is the muzzle velocity from that 3" barrel?

Does the shorter barrel make it louder than the standard pistol when suppressed or will it be just as quiet?

Looks a great little pistol

Will you be testing the Taurus TX22 Competition model?

That's a sweet little blaster

You should do a video on the new heritage barkeep! 2 inch barrel in a 22lr/magnum.

I'll keep my Tandem Cross breathed on Victory however i do have the Volquartsen barrel for it.

Great stuff friend 👏 👍

Plinkster...I have a Ruger MK IV Target with the 5 1/2” barrel. Can you recommend a good set of sights? I need something more visible, especially on the front.....

That thing looks stupid fun lol

I've been wanting to do that to my Ruger MKII

Love that gun!! So where did you get the mag holding device? Also where do you get your steel targets ?

This is beautiful I want one

Looks fun!

I like your hand placement when removing the suppressor... I get in the habit of holding the safety ON when "tooling" accessories

Let it eat! That thing looks sweet

Did I hear some musical steel targets in the beginning? Ok, where do I find those?

Wonder if you can get that in Canada. Without the suppressor, of course...

Was hoping he'd go from Dr. Evil to Beatrix Kiddo on that edit lol

Would have loved a side by side demo of both lengths suppressed

My browning buck mark is awesome!

i have a stainless mark 3 that looks just like that. guys at steel challenge had clocking me.

What mag carrier is that and any other 22lr mags fit?

I think we have that same mag holder.

😂 Play “The Jetsons” tune on those plates.

Looks like I will get one. Thanks

With optic sights, it doesn't matter how long or short the barrel is, shoot ability and accuracy will be the same.

“Slicker than snot on a door nob”

You definitely do not need to shoot sub sonics in it, with a 3" barrel almost any ammo is sub sonic. I did this same thing with a Browning Buckmark. Cut the barrel down to 3" and put a red dot and suppressor on. Sweet shooter!

What suppressor are you running on that Mini Mamba?

How does it compare (aside from grip angle) to a Mark IV Tactical?

Nice, thanks for the video.

Does the short barrel handicap still hold true when using a red dot? I thought it was only an issue when using open sights.

Waiting on that video of the Heritage Barkeep that was supposed to be coming out :D

people are saying unreliable 22lr.... 😂 only when I don't clean the pistol. M&P15-22, m&p 22 compact, taurus tx22, and I haven't shot my 10-22 since I got the 15-22.

3" BBL doesn't need factory subs. Regular supersonic HV will shoot subsonic out of a 3" BBL. Although factory subs will be a bit quieter.

Amazing gun

Thats sweet I make volquartsen carbon fiber barrels!

Hey man what optic do you have mounted on that custom 22?

Which suppressor are you running on the mini-Mamba there?