The Nicest Laser Engraver This Year? The xTool D1 Review

Рет қаралды 198,412

Күн бұрын

Lets check out a brand new diode laser the xTool D1! Thanks to this video's sponsor Skillshare. The first 1,000 people to use this link will get a 1 month free trial: skl.sh/makeorbreakshop10211
*UPDATE:* The xTool D1 now supports Lightburn which makes this nearly a perfect machine!
Save 5% on the D1 with code MakeorbreakD1
Makeblock xTool D1 - geni.us/xtool_d1?track=yt-85p...
D1 Rotary - geni.us/d1_rotary_attachment?...
Makeblock Laserbox (CO2 Laser) - geni.us/nglIv?track=yt-85pafR...
Ortur Laser Master Engraver 2 Pro - geni.us/W5yj?track=yt-85pafRz...
Check out the full written review: www.makeorbreakshop.com/proje...
TIMESTAMPS
00:00 - Intro
00:30 - Assembly
00:57 - Overall Features
04:51 - Noise Test
05:21 - What I Like
07:09 - Software
08:29 - Safety Concerns
11:05 - Demo
12:29 - Engraving/Cutting Tests
17:56 - Other Diode Lasers
🔥 LEARN LIGHTBURN FOR LASERS
Take the course: course.makeorbreakshop.com/le...
👨‍💻LEARN 3D MODELING
Take my free course: geni.us/xlMSx
Furniture Design in Fusion 360 (Save $20): course.makeorbreakshop.com/fu...
🖥Build plans and more: www.makeorbreakshop.com
💵Support the channel on Patreon: / makeorbreakshop
🎙Listen to the podcast (Make or Break Show): www.makeorbreakshow.com
🌄Daily updates on Instagram: / makeorbreakshop
🤖FAVORITE ROBOTS (affiliate)
Favorite Laser Cutter - geni.us/kqv4U
Budget Diode Laser - geni.us/yhIh
Budget CO2 Laser - geni.us/NsQiB9Q
Engrave Metal - geni.us/JtwL
X-Carve CNC - geni.us/ykswx4
Favorite 3D Printer - geni.us/qHrta
Resin 3D Printer - geni.us/d8JGVEw
Vinyl Cutter - geni.us/oFWm
🛠️TOOLS (affiliate)
Table Saw - geni.us/sFzQ
Miter Saw - geni.us/h8YkN
Band Saw - geni.us/MkqUZ
Impact Drive & Drill - geni.us/mfAysU
Drill Press - geni.us/dNyI9h
Planer - geni.us/yysAwMd
Orbital Sander - geni.us/kOil
6 in Jointer - geni.us/600Mv
Welder - geni.us/PGMBqN
Kreg Jig K4 - geni.us/ApW1r1
Plunge Router - geni.us/iRGoj
Jack Handplane - geni.us/ublnoRQ
Combo Square - geni.us/BkCt5n
Woodpeckers 6 in Square - geni.us/LMYqdh
PFEIL Marking Knife - geni.us/BUcKI
Handsaw - geni.us/h9sq04K
📹 CAMERA GEAR (affiliate)
Main Camera - geni.us/9nlsv
All Around Lens - geni.us/gfEnA6K
On Camera Microphone - geni.us/O3McpqZ
Rode Wireless Kit - geni.us/NZQsVFA
Diety Lav Mic - geni.us/sHyc99Z
Tripod - geni.us/x0dRK
Video Switcher - geni.us/h5nKZN
Key Light - geni.us/fNik
🎙PODCASTING GEAR (affiliate)
Microphone - geni.us/QpeqB
Cheaper Microphone - geni.us/3HADRSA
Boom Swivel Arm -
Audio Interface/Recorder - geni.us/hE656
Cheaper Interface - geni.us/OZqa

Пікірлер: 295

@makeorbreakshop 2 жыл бұрын

Update: The xTool D1 now supports Lightburn which was my biggest negative from the machine. Overall this is my favorite laser diode even at a higher price point than others.

@JamesGames. 2 жыл бұрын

There are 2 versions of Lightburn, which would I need, GCode or DSP?

@makeorbreakshop 2 жыл бұрын

@@JamesGames. its more like 2 different licenses, which open up support to DSP based or Gcode based machines. For the D1 one though you'll want the Gcode version.

@melissamcdaniel3542 2 жыл бұрын

Thanks

@TxSavage1791 2 жыл бұрын

Awesome I've now decided to get one of these for my first laser at home

@mallorikerr4092 2 жыл бұрын

I agree I am glad lightburn is now supported. It's much like my die cutting software from silhouette of America but I don't need to transfer from one to the other.

@3DPrintFarm 2 жыл бұрын

Nice review man! I have the D1 coming next week with the rotary tool. Gonna put it through its paces!

@moniquejohnson8427 2 жыл бұрын

I think you are the coolest!! 😎 Thank you so very much for all that you do! 😊 Thank you for creating videos sharing everything that you know, or learned thru trial, and error. It will definitely help a new beginner like me.

@mallorikerr4092 2 жыл бұрын

Your review video is one of the videos I used before deciding to order this laser. I'm in love as it gives me the detailing I cannot do with my electronic die cutting machines.

@LaserEverything 2 жыл бұрын

Seems like a capable little machine Brandon, thanks for sharing! :D

@makeorbreakshop 2 жыл бұрын

Thanks!

@LaserGarage 2 жыл бұрын

Great review thank you. Waiting on my 10w D1 to arrive any day now.

@makeorbreakshop 2 жыл бұрын

Awesome!

@JoleneOldham 2 жыл бұрын

I just put mine together (Jamuary 2022), you can use Lightburn with the D1 now. I'm really digging it. Thanks for your review!

@BGordzelik 2 жыл бұрын

How did you get your d1 connected to lightburn. My device wont even pull up it has updated firmware and am only able to use it on the regular program

@BuildDadBuild 2 жыл бұрын

Great video! I have one on the way. So great info!! Cheers

@RichardGreco 2 жыл бұрын

Thanks for the review. I am waiting for mine to be delivered and I was a little worried of the quality, so you straightened me out. I did accidentally buy the 5W version but hopefully it'll do what I need, which is just destroy my enemies through engraving and cutting paper and cardboard.

@makeorbreakshop 2 жыл бұрын

Just to be clear this review wasn't sponsored in the sense I got paid to produce the review. I was given the product for free for review but xTool didn't review the video once it went out and this is my honest opinion.

@jvjdrn 2 жыл бұрын

Richard, how is it working for you?

@RichardGreco 2 жыл бұрын

@@jvjdrn It is working well. I haven't done any advanced things yet, like etching glass.

@sally969 2 жыл бұрын

thank you for you detailed review. it really helped me operate my 1st xtool. any tips how to clean the orange box? accumulating black build up. thanks!!

@SintaxBSD 2 жыл бұрын

Hey Brandon, Brandon here! I did a lot of research on lasers and your video ultimately sold me on it so I ordered one and used your coupon code and saved a lot of money which was super helpful! Thank you so much for such a great review!

@makeorbreakshop 2 жыл бұрын

Awesome!

@pyrofool123 2 жыл бұрын

I think it would be very informative if you gave the engrave/cut times. I've owned a diode and co2 laser now and I think some people would find it helpful to know how long it takes to achieve a finished product. I'm not In the market for another one currently, I'm working more with plasma, but a coworker talked about this so I thought I'd check it out. Seems pretty nice and the creature comforts seem really nice specifically the integrated focusing jig.

@christopheradams7942 2 жыл бұрын

Great detailed review. Will this etch drinking glasses as well.

@xtrme1023 2 жыл бұрын

Great video. This is very helpful. I am looking to purchase my first laser unit so this is part of my research. Have you looking at or tested the SCULPFUN S9 Laser? I would like to know your thoughts on that unit if you get a chance.

@Powerstrokemods 2 жыл бұрын

Great review, thanks so much! I'm new to this, and just discovered your channel, and plan to be a regular viewer here. Already ordered a 10 watt D1, and hope it'll be a good unit to learn on. I was thinking about using this to cut vinyl for decals and stickers, like the vinyl cutters, and hope there's a way to do that with this machine, so I won't have to buy a cutter as well. Any advice would be appreciated, happy cutting and engraving to everyone!!

@elvijs3809 2 жыл бұрын

Do your research first. Dont cut vinyl with a laser cutter. It releases poisonous gas.

@hellokittyonastick 2 жыл бұрын

Whenever I put those glasses on I yell "go go gadget green grandpa goggles!"

@reverencemastering9405 2 жыл бұрын

Great review!

@makeorbreakshop 2 жыл бұрын

Thanks!

@champ1104 2 жыл бұрын

Nice review, very imformative

@chainedmoose6712 2 жыл бұрын

I am impressed! I’ve been building and testing commercial/industrial laser engravers for the past 10+ years now and they cost a ton. For the price, size of diode and material being used here, this is a great deal. Gonna have to pick one up and try it out.

@Lazywatchsmith 2 жыл бұрын

Hi awesome content. Do you think it would be possible to use the laser by the memory card?. So you would not need to have computer in the same room.

@melindagibson8606 2 жыл бұрын

Wonderful video. Thanks so much!

@John-of5sh 2 жыл бұрын

I can see this engraver setting in my garage in the near future. With that being said I am starting from scratch and I currently do not own a laptop.Can you recommend a particular laptop that works well with this engraver? I have owned Dell, HP's, iPads, etc over the years if that helps. I would prefer to spend any extra money I have on goodies for the engraver, but I want a laptop that will work well with the engraver without a lot of fuss. Thank you for your time and Thank You for posting this video. Your feedback is what I used to determine which engraver I want.

@FutureLaugh 2 жыл бұрын

have you considered making a video about building a vented enclosure?

@Tkrain 2 жыл бұрын

My biggest concern was that it didn't run Lightburn, but now it does. Fantastic review! I'd been waffling between the OLM2Pro and the XTool D1. I just ordered the XTool!

@staynavytom2963 2 жыл бұрын

Brian, what do you use your XTool for?

@Tkrain 2 жыл бұрын

@@staynavytom2963 Gifts, and soon items for sale in Ersy

@micro963 2 жыл бұрын

Thank you for sharing nice video 👍👍👍does it cut 1/8” plywood?

@benmacdougall 2 жыл бұрын

When cutting plywood with a 10W machine like this, what is better - setting it to a higher power and doing fewer passes, or going for a lower power with more passes?

@elcarmen1970 2 жыл бұрын

Good day! Great review of the D1, awesome machine. Will you be doing a review of the M1? I would like to purchase one of these two to start a home business, however I can't make a decision. I am hoping your review will assist me with a final decision. Thank you

@makeorbreakshop 2 жыл бұрын

I should be able to get my hands on the M1 but it sounds like it won’t be until early spring though.

@RepLedZep 2 жыл бұрын

Great review! I've been waiting for some in-depth info on the D1 for weeks now. I am wondering, though, how it would do cutting very thin hardwood. They claim it can cut 6mm Basswood in one pass. My main use for a laser is cutting through 1.5mm hardwood (.062) of different species (Maple, Cherry, Walnut, etc). If you ever have a chance to check out that capability, I'd lover to know how it goes. I have a Glowforge now, but when it dies, I'd love to find a cheaper alternative. Thanks again for the detailed laser reviews!

@kentharris7427 2 жыл бұрын

I am using a Long Mill CNC router to run my laser. In my enclosure I am running a bathroom fan since it can be ducted out of the garage when running the laser.

@MIMparamodels 2 жыл бұрын

HI , great review !!! i love it !!! this machine is looking grreat and i would like to purchase one but , before i move forward, i would like to ask you if it can cut white kite fabric . I own a TT 5.5 S laser engraver, it works fine with ripstop kite fabric that i need to cut but the only 1 problem is that its not possible to cut white fabric. Do you think that this 10 watts version could solve the problem ? many thanks in advance and congratulations again.

@sergeyslipchenko188 2 жыл бұрын

I've watc hed a lot of your videos, they are great! How does this xtoll d1 10 watt stack up against Sculpfun s10? I've tried browsing your site for comparison.

@jillthomas6975 2 жыл бұрын

watched several of you videos, but not one on engraving acrylic. I know you have to have something underneath the acrylic so the lazer does not just pass through. My question is some acrylic blanks have colored protective coverings, some blue heavy plastic and some a brown cardboard looking color. If you just remove one side of the of the covering are those backing colors solid enough to keep the lazer from passing through?

@gpegasusm 2 жыл бұрын

I’d love to hear your thoughts on the Atomstack X7 Pro. It seems to use the same laser module as this one. It is a more traditional extruded aluminum chassis but that allows for easy future work area expansion.

@makeorbreakshop 2 жыл бұрын

It’s ok the way right now!

@Gewehr2180 2 жыл бұрын

Agree. I already own the Atomstack M50 laser module retrofitted to an earlier A5 20W and I haven't done much at all with it but I did cut 3/8 solid Poplar fairly fast. But I really don't do much cutting at all. But it is definitely a hotter laser for sure.

@trisbaker363 Жыл бұрын

A good fix for the cable is to loop a couple of thin rubber bands around it and attach the other end of the rubber band to a weight. It works perfectly.

@Laurensleathers 2 жыл бұрын

I do leather tooling and was wondering how well it would cut out pieces. Are the edges crisp or does it leave snags?

@narovanjanaharyfanomezanaa1023 2 жыл бұрын

Nice video, thank you! What is the real life hours of those diode laser machines? Thank you.

@FutureLaugh 2 жыл бұрын

all these open lazers are so versatile on what you can lazer, but i worry about light leakage and eye damage to people, children and animals in the room without glasses. Do you recommend building an enclosed box?

@josephbyam7170 2 жыл бұрын

Will we be seeing a review of the neje master 2s max 40w laser soon ?

@ProEdgePaintball 2 жыл бұрын

How do you think it will perform on a non flat surface? Something with different elevations?

@mikestrains23 2 жыл бұрын

So for a budget laser that can do everything including metal , what do you recommend?

@maiger712 2 жыл бұрын

As a newbie I’m debating between this and the glow forge

@caffeenqueen 2 жыл бұрын

Can this machine cut out thinner acrylic? I make jewelry with shrinky dinks but I've been thinking about upgrading to acrylic and getting this machine.

@TK-vs8bf 2 жыл бұрын

Great video as well!

@ROYJONEZ 2 жыл бұрын

Great informative video. Will it engrave aluminum flask

@JamesGames. 2 жыл бұрын

I'm trying to decide between this and the Atomstack X7 Pro. Which has finer detail and accuracy?

@betheecho 2 жыл бұрын

Hey, have you had a chance to evaluate the new Sculpfun S9? I've heard great things about it.

@floridadroner8329 2 жыл бұрын

Is this the one to buy? So many of them. which would you suggest

@EileenTheCr0w 2 жыл бұрын

They seem to have support for lightburn now.. considering buying this to do custom wooden invitations and maybe selling some stuff to pay itself off..

@welldonecj7 2 жыл бұрын

Is there any difference from the early model d1 10w to the current models? Found a local one for sale was debating if it would be worth getting vs a new one.

@MSL209 Жыл бұрын

That's good to know about the Glowforge. Internet necessity = deal breaker.

@Tsar239 2 жыл бұрын

Would it be easy to do tiling with the D1? I would like to use it to cut patterns in fabric but the cutting area is a little small for my use.

@jacobdean94 2 жыл бұрын

Is this more powerful that the new LU2-4 laser from Ortur? How much more would I be able to cut with one vs the other? Thank you!

@landofashgaming7732 2 жыл бұрын

What settings should I use to engrave ceramic tiles? Or does it not work on ceramic? I tried it and it didn’t even leave a mark.

@Ninja1Zombie1Master Жыл бұрын

@Make or Break Shop Just as a heads up, I received a promotion for an extra $80 off that stacked with the "back to school" promo xTool has that ends tomorrow. I picked up a 10 watt D1 pro for just $580 plus tax. Seems like a great deal for anyone who has been on the fence, so I figured I'd put this out there before it's gone. PS I used your affiliate link because your channel's quality is unmatched for all things laser.

@ridgelightranch4334 2 жыл бұрын

Thank you! So what difference would I notice with a 5W vs 10W. How does the lower power play out in use? It is speed or thickness of material it can cut? And, how hard is it to make a 2nd pass at a material to cut it? Does it still cut pretty clean?

@joesciarrone781 2 жыл бұрын

I ordered the 5w as well. It's on the way and I was also worried about how big of a differences would be. What did you find out after using it? Big deal, or no? Thank you

@borisrenderos5831 2 жыл бұрын

Does it work on gold, silver, platinum? If not, would you be able to recommend one that is affordable?

@Chucka1463 2 жыл бұрын

Have you had a chance to review the 20 watt version that will be announced on March 2nd?

@GaryLMontier 2 жыл бұрын

I'm trying to find videos on the usage before my machine I ordered arrives, (Should not be hard, considering it hasn't even been mailed yet-over a week later!) and one I can't seem to find is how to make sure it starts where I want it to and stays on the board. Is the software coming with the tool able to identify printing/cutting surfaces edges, etc...?

@yeabutwecouldbefreer 2 жыл бұрын

Bro They just pulled your advertisement link, almost doubled the price. Classic switcheroo. Fastest I have seen this far. Hopefully they paid you directly ahead of time.

@j.r.huffmanandcompany586 2 жыл бұрын

The sample metal dog tag included in the package lasered like a champ. But I yet to find another uncoated metal that will do the same? What am I doing wrong? There's a setting for stainless steel, but it doesn't do anything on metal blanks.

@PopsGunChannel 2 жыл бұрын

Having a huge problem centering the blue dot to get my Center point for engraving please help Regards, Rick

@ComgrowOfficial 2 жыл бұрын

Great, excellent video again. I'm excited to see the Comgrow Z1 review, and if you have any questions, please feel free to contact me:)

@weslydenton9158 2 жыл бұрын

Does the software allow upload of preexisting files you've made on other software?

@molecularbanjology 2 жыл бұрын

I know basswood is pretty soft, do you know how well this would engrave hardwoods like maple or walnut?

@nocturnalpotato 2 жыл бұрын

Do you have any recomendations for additional or better goggles?

@kevinnance9532 2 жыл бұрын

I noticed you didn't do your normal tests with this review, how does it compare to the Atomstack X7 pro?

@artgamboa427 2 жыл бұрын

You can use lightburn on it now! game changer

@melissamcdaniel3542 2 жыл бұрын

Do you have an up-to-date video or thoughts on the laser after the Lightburn software update was added to the machine? I want to purchase a diode laser for my hobby shop so I can make some extra money. With all of the choices out there I don't know which one to choose. I would like a 10 watt. I am new to diode lasers. If you could help me I would appreciate it. Thank you, I watch all of you youtube videos.

@carmineriganti2333 2 жыл бұрын

I have same machine 10w I notice you more images on your pulldown menu than mine and I did upgrade firmware, still same group of images. Any ideas? Also is there a site to download free images 😃 I did buy this after watching your reviews

@AnAlYs09 2 жыл бұрын

Alright so if we have the money for the Makerbox Pro. Should we get that or this? Just a basic crafter.

@richielord4360 2 жыл бұрын

So if you were going to buy a machine next week, would you get this or the ortur LM2 pro. Thanks for all the great videos.

@jeff02564716 2 жыл бұрын

I’m in the same boat. Which one did you get and are you happy with it

@loganmertz9250 2 жыл бұрын

Do you think this is a good engraver for hardwoods?

@pamelacaldwell5414 2 жыл бұрын

Hello, I'm wondering if I need a special computer (specks) for this Xtool D1

@thatonegamer2709 2 жыл бұрын

Would you happen to know the highest dpi for the 10w version?...when i try going over 600 i get a "danger, notice" pop up.

@ArkansasEllie 2 жыл бұрын

Could you compare this one to the glowforge?

@luisvcybertek 2 жыл бұрын

Thank you

@makeorbreakshop 2 жыл бұрын

You're welcome

@normanjackson4459 Жыл бұрын

Does anyone know the nose clearance on either of the two lasers? With wood always being worked LACK of height can be an issue

@virginiashannarideout6314 2 жыл бұрын

I know you said it would engrave on stainless steel, however would it engrave on Sterling silver?

@Ebikelover 2 жыл бұрын

I just put mine together today 10W with the rotary and downloaded Laserbox & LightBurn on my MacBook Air and it cant find my laser, I hooked up my Wife's HP laptop and it worked and printed. Do you have any ideas why my mac won't find it ?

@wendyoster7218 2 жыл бұрын

I just ordered mine yesterday. I’m really excited to start using it for my craft projects. Does this work with SVG files?

@makeorbreakshop 2 жыл бұрын

I believe so

@jenniferrodriguez9522 2 жыл бұрын

Yes it does

@wendyoster7218 2 жыл бұрын

Great!

@midgetsmommy 2 жыл бұрын

can you cut and engrave with CorelDraw or do you have to design and import into their program?

@neildevine6373 2 жыл бұрын

How long does it take for this machine cut a 1/4" 4"x4" piece of wood with detail?

@jonathanvandagriff7515 2 жыл бұрын

Can the laser shield cover be raised up on the laser unit?

@nathanieltagles9245 2 жыл бұрын

I want to engrave yetis, would this work? Would u get a 10w or 5w or would it necessarily matter ?

@twig1846 2 жыл бұрын

Can this cut thin clear acrylic sheets? I want to make display boxes

@brianmaliha603 2 жыл бұрын

Did yours come with any software or instructions mine didn't and I have no idea on how to get it to work.

@hiuyuc24 2 жыл бұрын

how about import ai files? can it be easily selected which area is engrave, which part will cut?

@neilrisley6667 2 жыл бұрын

Hi there...GR8 videos 👍 If U could only buy 1, would U buy this or the Ortur LM2 Pro? Where did U hear about Ortur bringin out a 10w laser please?

@Abigail-ie8nh 2 жыл бұрын

sinismall.com/products/lu2-10 We have started pre-sale.

@EEZYEEEE 2 жыл бұрын

Can this cut intricate pieces of cardboard that is about 1/4” thick?

@blackdog19710 2 жыл бұрын

Is there any difference between the makeblock xtool d1 and the cloudray version ?

@Nicholas-nc8ru 2 жыл бұрын

So just to be clear, this unit CAN engrave annodized aluminum?

@StumpArchery 2 жыл бұрын

Can you engrave bottle of wine using calligraphy using this laser engraving D1. Please need some advice!

@DavidWilliamsThatsMe 2 жыл бұрын

Great video! It was a toss up between this and the Ortur LM2 Pro, with the deciding factor finally being software. My first ever laser engraver was a Wainlux K6 with proprietary software and mobile app. On the xTool site I believe there's some sort of mentioning of D1 working with 3rd party software? I tried reaching out to make sure Lightburn was compatible but so far no response from xTool.

@makeorbreakshop 2 жыл бұрын

Yeh I'm still waiting to hear back about 3rd party software, fingers crossed!

@nornor-xy9zd 2 жыл бұрын

It's NOT compatible with Lightburn or any other 3rd party software.

@m19710310 2 жыл бұрын

You got the LM2 Pro finally?

@benkenobi671 2 жыл бұрын

I've asked the same question and received a reply that their software is proprietary, though they are "working" on making their machine compatible with lightburn - though no indication of when to expect that capability.

@ginahevner 2 жыл бұрын

@@benkenobi671 Looking to purchase today and it shows it IS compatible with Lightburn.

@johnkemas7344 2 жыл бұрын

Will this laser (10W) version engrave off copper foil from circuit boards??

@mikeledee8786 2 жыл бұрын

What can you tell me about the xTool D1 36w Higher Accuracy Laser Engraver, 5w-7.5w Laser Cutter and Engraver Machine, Laser Engraving Machine Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17"x15.98") , listed on Amazon? Thanks

@m19710310 2 жыл бұрын

Good job Brandon! This or ORTUR Laser Master 2 Pro???

@user-de2gg9mq1p 2 жыл бұрын

Laser Master 2 Pro will be better

@melaniekelley1329 2 жыл бұрын

I just got mine, set up and everything I have tried to burn has streaks, have tried 3 different woods. Can anyone help me with what might need to do?

@dawnbreaker84 2 жыл бұрын

It looks very nice but the first question i have, how i could install a air assist ??? The laser is closed

@makeorbreakshop 2 жыл бұрын

Most people will mod an air assist with a cooper tube attached to the side of the laser head that then attaches to rubber tubbing and finally a compressor. So the air doesn't go through the actual laser module is just is coming in from the side.