Good morning, thank you for watching. Good question about the offset angle of the rear legs. I just set them so that when looking at the stand from directly above; the bottoms of the legs didn’t protrude past the sides of the top deck where the anvil sits. This way the anvil can still take all the necessary blows, including lateral ones without the stand moving even a fraction but the legs are still tucked out of the way so you don’t catch your feet on them when moving around the anvil. I hope this answers your very good question, if you need any further information please don’t hesitate to get in touch. Many thanks!

@@MattBerryCustom Thanks for that so at 2:36 in the vid you have marked it so the legs come to the edge is that what you meant.???

No problem! At 2.36 the markings are putting the legs 120 degrees from each other, when I came to weld it I thought the back legs were sticking out to the sides a fraction too much, so I moved them inwards together a little more. Without the anvil on the top deck I looked directly down from above and you can just about see the bottom of the leg where it’s welded to the flat floor plate with the bolt/peg hole. The flat plates then move out past this point increasing stability but not something you will trip over. If you want go to my website www.mattberrycustom.com and use the contact form to send me an email, I can reply with a picture when I get chance if this helps?

@@MattBerryCustom Ok thanks Matt

Thank you Lady S, it’s taken me a while but I got the video done in the end! 😃

@@MattBerryCustom It's a very good thing!

I’ve put the royalty cheque in the post! As for catching up to you I’m a million miles away, you didn’t see how many epic balls ups I made before I got the finished pieces! 😉. Thanks for watching Steve.

That means a lot to me, I’m really starting to love the film making side of it. Cheers Keith, much appreciated 😉👍🏻

I liked that too.

My pleasure Mr Smith! When I’ve got an idea in my head every surface becomes a designing pad. The drawings should baffle some archeologists in the future 😉

@@MattBerryCustom To baffle is our aim! 😀😀

Cheers Dan! I would highly recommend the chain hold down, it works a treat mate. Quick to engage and doesn’t mark the workpieces. Thanks for watching my friend 😊👍🏻

Thank you my friend, much appreciated. Sticker in the mail shortly!

Thank you. Yes, my dear lady sometimes has high expectations about how long these things take, but…. It gets done when it gets done! Have a good day 😊👍🏻

Thank you! And it’s some of the cleaner and less potty mouthed things I’ve written on walls 😉😂

Thank you! The positive feedback much appreciated!

Cool! Glad you got got the blacksmithing bug and glad you got something out of the video. As a woodworker you’ll get a kick out of being able to make your own fixtures and fittings, the hand forged stuff looks far better. 👍🏻

Thanks man, yeah do it, hot metal bashering is good fun! Glad you enjoyed the video!

Thanks mate! Yeah it can make you very ill, google metal fever, it’s an eye opener.

Cheers Shane, you’re a good un! Thanks for watching 😊👍🏻

Appreciated my friend, if people can learn just one thing from the video then it’s a job well done. Thanks for watching 😉

Thanks for taking the time to watch and comment, very much appreciated! 😊👍🏻

Appreciate it Jim, you’re a gold mine of information yourself and I’m really glad you got something out of it. Thanks again my friend 😊👍🏻

It’s a pleasure man! Hope it goes well for you. Mine still performs beautifully and super quiet to work on. 👍🏻

@@MattBerryCustom I have no doubt it is the sand filled legs and chain hold downs. I love it.

Thanks Dan, a practical project for something I needed. Pretty and arty stuff next video I promise 👍🏻😊

Thanks very much for watching, not the most interesting of my creations but something I needed. Appreciate the positive feedback 😊👍🏻

Matt Berry Custom well it was interesting to me 😉👌

Sparta Customs Thank you 🙏🏻

Thank you! Very kind of you to say 😊👍🏻

Thank you John, yeah it bears my behemoth proportions so it’s sturdy enough. 😉

Yeah it’s food grade citric acid, most chemists or home brewing shops sell it. Best bang for your buck is EBay though. Leave it to soak for about 45 minutes. Muriatic acid (sold as brick or patio cleaner) is much faster (takes a couple of minutes) but is nasty stuff. Whichever method you use do it well ventilated. Glad you like the sign, gift from the Mrs. She said it sums up my intolerance for most people perfectly 😁

Thank you Tom, this build is very much needed for some projects in the pipeline. Stay tuned!

@@MattBerryCustom I will definitely stay tuned!

Thanks Brent, much appreciated my friend!

Do it! Imagine the wood and metal fusion ideas you could create..... or fires, either way great fun! 😁

@@MattBerryCustom Been thinking about having a go at blacksmithing for a while now, maybe a day somewhere to start with.

Do it man, I’ve only ever done a one day course then just picked up stuff on KZfaq. You’ll smash it!

@@MattBerryCustom You got it! Holidaying in a couple of weeks then I shall see if there are any near me. 👍

Thanks man! Appreciate you watching. As for making it look easy, it’s all smoke and mirrors 😉

Thanks Angie, it’s not art or pretty, purely utilitarian but I tried to make the video as interesting as possible. Thanks for watching and your support!

Good call, I like your thinking. I think it would definitely work. Appreciate you watching my video! 👍🏻

Thank you Sir! I find it works very well and doesn’t mark the workpiece. Thanks for watching 😊👍🏻

Thank you lovely people! Hey, did you notice the Phunkiss pencil in use at the start of the video? Thanks as always for the support and positivity, it’s very much appreciated. 😊👍🏻

@@MattBerryCustom, wow we both missed seeing that! We're so glad you're getting use out of it!

Thanks Andy, it works really well and doesn’t mark the workpiece like standard hold-downs do.

Appreciate that! And thanks for the positivity on the editing side! 😊👍🏻

Cheers Jamie, you’ll nail it mate, but you know where I live if you need a hand. 👍🏻😊

@@MattBerryCustom oh now that sounds like a good excuse to come and play with your toys!

My workshop is your workshop brother 😊👍🏻

Thanks Mark, a lot of burnt scrap metal was created in the making of this video 😂

Hiya mate! Thank you for the positivity! Yeah I love my Hilux’s, this is my second one, my first one I had for 15 years and I’m kicking myself for getting rid of it, I should have restored it. Yes you can get Trefolex in the Uk, is it good stuff? I use CT-90 cutting and tapping fluid at the moment. 😃👍🏻

Thank you mate! Yes it’s the sand that dampens the resonance and helps kill the ear splitting ring. Glad you got something out of it and you should try doing some stuff with metal yourself, man of your skills I reckon you’d come up with some amazing stuff! Thanks for watching and your support as always. 😊👍🏻

​@@MattBerryCustom The whole "sand in the legs" thing makes perfect sense now that I've seen you make it. Thanks Matt :) I've always wanted to try a bit of blacksmithing :) My neighbour has an anvil (It's bolted to a stump of wood) but he doesn't have a forge. I'll have to talk him into helping me build one so I can use his stuff! haha :)

Fair point, I’m still learning when it comes to video making. But you do hear the anvil being struck and not ringing right at the start of the video. Thanks for watching. 😊👍🏻

Apologies for the late reply I’ve been away. The size I used was 2”x4” with a 1/4” wall thickness. In my opinion I think 1x2 would be a little under sized and I’d be looking at something near the size I used. I use it and have absolute confidence it’s strong and take whatever hammer blows I deliver, personally I wouldn’t want that gnawing doubt in the back of my mind. Many thanks for watching and enjoy your build. 😊👍🏻

Good morning. It’s called an Eazi-lift, I’ve had it for years. Capable of lifting 125kg very easily just by turning the handle.

@@MattBerryCustom that’s very cool. Thanks