The OOD Jupiter just got an upgrade | OOD Juno is now available!

Рет қаралды 18,086

Күн бұрын

The next generation of project HIR-mini is officially here. Juno is the spiritual successor to Jupiter, with better design, brass inserts, and freely available files on GitHub for you to print yourself with our Hardware Kit. There's much more to talk about this new blaster, so let's get going!
• • •
Get your Juno and accessories here:
outofdarts.com/collections/juno
Find our GitHub through the link below:
github.com/OUTOFDARTSSHOP/Riv...
Want more foam-flinging content? Subscribe to our once-monthly Newsletter!
outofdarts.com/pages/e-mail-s...
Have questions about a product? Need help modding your blaster? Shoot us an email!
outofdarts.com/pages/contact
Follow me on Instagram for sneak peeks:
/ outofdarts
For everything else, find us at:
outofdarts.com
• • •
FAQ & Corrections:
•
• • •
Chapter Timecode
0:00 Opening & Introduction
0:36 Juno's Design Pedigree
1:41 Problems with Jupiter
2:50 Poll results
3:16 Juno Overview & Magazine Compatibility
4:27 Photon Flywheels & Performance
5:39 Single, Two-Stage Trigger Default
6:02 Battery Compatibility
6:27 More Features of Juno
6:45 Availability (featuring Hardware Kits!)
8:09 Some Goofy Proton Pack Fun
9:32 Proton Pack Availability Updates
10:17 Juno's Fury
12:15 Closing Remarks
• • •
Out of Darts, run by Luke, is a one-stop hobby shop for all things nerf, foam-flinging, and blaster tag. We carry all the supplies, tools, and accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 3D printers. Check out our site below for guides, build lists, and resources.
Edited by J Perry Heun, Out of Darts Media Producer

Пікірлер: 103

@outofdarts 7 ай бұрын

We are so happy to launch this new blaster with old roots in our business! Get your Juno and accessories here: outofdarts.com/collections/juno Find our GitHub through the link below: github.com/OUTOFDARTSSHOP/Rival-Juno-Blaster

@hideri9220 7 ай бұрын

luke will u review Dart zone MK4 and omnia pro? i waiting for u to review them :D

@DerpyNate 7 ай бұрын

My biggest criticism with the Jupiter (as a proud owner of one) is that I couldn't reprint any of the parts in case of a failure, or just to swap colors, etc. This has addressed that, and I am insanely excited to get to build my own Juno!

@iloveferrets5859 7 ай бұрын

"15 round mags are great for that extra bit of capacity" and then all of it disspears in 3.9 frames anyways

@boomer7784 7 ай бұрын

I would love to see a drum rival mag made by OOD

@hkl9209 25 күн бұрын

There is a very rare 30 round drum.

@CaptainSlug 7 ай бұрын

Thought: For the Fury Hose provide an option for the loading door/gate to accept magazines. They could be used as speedloaders for the tube instead of as traditional magazines. Or maybe just use the paintball receptacle from the perses hopper and pull the tab on the mags by hand to dump the mag through the receptacle?

@outofdarts 7 ай бұрын

I like the speed loader idea! I'll add it to a list for Tarik and Luke to consider. - Perry

@vape42 5 ай бұрын

@@outofdarts what about a switch reverseing the current to the vaccum motor to have the vaccum suck balls in?

@alexandermacphearson4379 7 ай бұрын

This is the best thing to happen to Non-competitive foam flinging. Jupiter was groundbreaking and this looks to be a worthy successor. Congratulations. As soon as the proton packs are back I’m ordering EVERYTHING you have for it!!!

@davidpyo3455 7 ай бұрын

Even though HIR blasters aren't my thing, really appreciate you guys starting to post files for modding and print replacement!

@Sillybutts 7 ай бұрын

Very well done on this design, and I commend you guys for going with open source!

@3dPrintCreator 7 ай бұрын

Lol, I do remember many years ago when you and I entered a contest for making a 3D-printed blaster. I think it was a contest run on a facebook channel, but I am not sure about that. I do remember that only 3 of the contestants had a blaster ready when the deadline passed and we were thinking we were the winners, but then they shifted the deadline a month, so others could also join. If I remember correct, you got the first place in the contest, and I got third. After that I never touched a blaster again while you made a career out of it. I am following your channel ever since. Keep making them, and congratulations with your new blaster.

@JangoFoamFlinger 7 ай бұрын

That smile on your face is priceless. The ironman colors makes me want to get 2 and mount them on my arm like gauntlets. With that new hose mag, it would even look cool as a functional LARP Addon

@bbriiannz 7 ай бұрын

It always brings me joy whenever I see him smiling as he's firing a blaster; imagine how I felt when he test-fired the juno with the proton pack.

@user-xd2jn3ee9b 7 ай бұрын

I love love love that these files are available, so many possibilities for people to design around while still supporting OOD through part sales.

@mr.wublin 7 ай бұрын

this looks absolutely fantastic! great to see the improvement of previous issues with the Jupiter, and its wide range of compatibility.

@AndrewAitchison100 7 ай бұрын

That’s so cool! I had no idea that was coming. Yeah, I struggled so much to go above 40 balls as the fan has to be more powerful to push the balls up against gravity.

@Jarek4 7 ай бұрын

It was a pleasure getting an early look at the warehouse, still has that familiar Jupiter feel we all love!

@crashtestrc7213 7 ай бұрын

I appreciate having the files available and hope to see it on future blasters( it would also be great if hardware kits/ files were made available for the Momentum.

@draytonlav 7 ай бұрын

This is what I thought I'd get to see when I first found your channel! So glad you're entering the open source world! Love it!

@carfar4775 7 ай бұрын

I can’t believe it’s been 5 years since the Jupiter launched!

@RiverWilliamson 7 ай бұрын

This is everything I've wanted out of the Jupiter platform since I first saw it. Way to go, y'all!!

@wbhandy 7 ай бұрын

Awesome! I enjoy printing and building my blasters just as much as firing them, so this makes me much more interested in the Juno!

@CRNerf 7 ай бұрын

This looks amazing! Thank you for offering this.

@pv8685 2 ай бұрын

thank you so much for making it for download. i allways wanted to have a jupiter. and now i can make a juno. thank you Luke!

@zaka0781 7 ай бұрын

Beautiful blaster! Definitely on my wish list!

@Boomstickmods 7 ай бұрын

Hardware ordered and printing started

@outofdarts 7 ай бұрын

Can't wait to hear your thoughts!

@haloeclipse 7 ай бұрын

Once again super impressed with OOD. Great job making it open source

@justusdude 7 ай бұрын

I was hoping Juno's fury would be a hard tubing stock like the sylphrena but as it is its still really sweet. Love the new flywheels as well, that's probably what I'm most excited about

@SpencerPaire 7 ай бұрын

Since so many files are hosted, I'm sure folks with CAD skills will be on that Toot-sweet! I'd probably do it myself if I had a local nerf community.

@scorp12_ 7 ай бұрын

This guy needs more subs and views

@kclazygaming8543 7 ай бұрын

Can't wait to print one!

@eggbag4182 5 ай бұрын

The Jupiter released over five years ago? I don’t want to feel old

@santi-37919 7 ай бұрын

"Juno was mad He knew he'd been had So he shot at the sun with a gun Shot at the sun with a gun Shot at his willy one, only friend..."

@vanoopsalot 5 ай бұрын

It’s great you’ve brought Jupiter back to the fore! I am considering purchasing Jupiter as my first custom blaster, and as my first electronics project! I’m sure I’d be much happier with the performance of Juno, but sadly I absolutely cannot accept the bulk. It looks significantly less holsterable, which seemed the entire point of the Jupiter over a rifle. I understand the perhaps non-negotiable validity of adding the battery compatibility for an only slightly larger pistol, but a pistol is already slight, so every cm counts. It’s a fine product, but I don’t think I’ll ever purchase a Juno when I could just finish up my Hera. Perhaps consider a Juno Lite design?

@neilforreal 7 ай бұрын

Cool! Would love to see OOD invent an open source stryfe-x style snap on battery pack with integrated alarm and charger.

@thecaribouninja 7 ай бұрын

It would be interesting to have the ability to connect a stock to Juno's Fury, so that the hose could be secured if one did not desire it to flop about. Or have a stock design as an add-on to Juno's Fury, with the hose passing through it.

@wadekirby8575 7 ай бұрын

Juno's fury would be even better as a scavenger blaster if the loading door was sliding and toped with a funnel as wide as the blaster. A sliding loading port could remain round (with minimal diameter change) to relive congestion. If the top of the funnel had rubber fingers it could act as a hopper to hold rounds until you had time to slide open the port and shake them into the mag tube.

@TintagelEmrys 7 ай бұрын

Juno's Fury looks like it was made for going inside a thumbhole stock. That is a design I want to work on.

@BeefIngot 7 ай бұрын

For the hose mag, it sould be neat if you could flip the fan out to have a mini funnel where you could load balls more easily.

@Atomic_dog01 7 ай бұрын

You gotta put a scope on that side rail

@outofdarts 7 ай бұрын

You could even put a scope on the battery door if you pick the picatinny rail option...

@DefinitelyNattox 7 ай бұрын

This with a proton pack plus a little rocket on the side would absolutely destroy in HvZ!

@runesrensen8551 7 ай бұрын

Take My Money!!!

@adamtait5794 7 ай бұрын

Huge fan of all that you do. Regarding the tube feed mini proton pack could the tubing be worked into a 3d printed stock because that would be amazing

@DerpyNate 7 ай бұрын

Okay, question! Does the stock flywheel cage support non-photon wheels? Asking this, because I'm wanting to gut my Jupiter for its components, and gather the rest of the hardware myself. Ideally I'd be able to re-use the pusher motor, motors, switches and flywheels.

@lavenderglaab835 7 ай бұрын

Oh, this is so so cool. Will the wheels be sold separately? I'm less interested in the Juno herself and more in what these new wheels will enable for hobby Mega and Rival flywheelers 👀

@turokhunter22 7 ай бұрын

Yup, they are already available in the shop.

@outofdarts 7 ай бұрын

Yes! OOD Photon flywheels are available here: outofdarts.com/products/ood-photon-flywheels

@dfwdweghom8902 2 ай бұрын

Looks great! What are the filament colors used in the Juno's Fury? They look great

@betalai5633 5 ай бұрын

Thank you, my dream is true

@Blasterhub 7 ай бұрын

Hey Luke! The new flywheels say they work with Mega as well. Any clue what motor spacing you were using for those? For those of us with Motostrykes and Mastodons to spare 😆

@outofdarts 7 ай бұрын

I spoke with Tarik, and he hasn't yet done enough testing to provide recommendations for crush when firing mega darts. If you find a spacing that works before we get around to it, we'd love to hear about it!

@BigSkwigg 7 ай бұрын

I'm more interested in the flywheels to be honest, would love to replace the fwc set-up in my perses with something beefier.

@itsrylannnnn 7 ай бұрын

Make the Out of Darts Neptune

@spidermokey 7 ай бұрын

Please post a video on the process printing this blaster and asembly i looked a t github but i couldn't figure it out. I really wanted to get the jupiter but i did not want to spend that much money on it and thank you. You are the person that got me into Nerf.

@germ4bass 7 ай бұрын

You should make it into a Mega Man arm blaster just for shitz and giggles

@xinixini1826 7 ай бұрын

6:11 Trigger discipline! Don't shoot yourself in the balls with high velocity balls!

@jeffreycarman2185 7 ай бұрын

Awesome! I have dreamed about getting a proton pack since the first time I saw a DIY one…

@AnthonyTanTaro2008 6 ай бұрын

hey @outofdarts how about a small medium button that You don’t have to press so hard where You don’t have to apply pressure. would be a great disability friendly option. since i have a person/friend who is disabled and has a 3d printer of their own.

@Jangular 7 ай бұрын

How many rounds does the fury hold? I know the tube could be shorter or longer, but as it was in the video do you have a rough idea?

@turokhunter22 7 ай бұрын

My version held 65, and his held 40. So the range will be around there depending on print quality and assembly. This was on Kraken, Loki (which we are testing) should be able to push more and handle the higher ammo ranges.

@Jangular 7 ай бұрын

@@turokhunter22 Nice, that should be a lot of fun, unsurprisingly my first thought seeing it was wondering if that setup would be viable in a flag push style game for an aggressive player lol

@somethingsomething9081 7 ай бұрын

I love my Jupiter, got it kitted out with a Crooked Cousin in the front and with the top rail I attach it to barrels on other blasters to act as a MasterKey. I see that the top battery door has picatinny rail will there be an option for the front piece to have rails to attach a crooked cousin like the Jupiter?

@GM_Mack 7 ай бұрын

YES I WANT TO PRINT ONE!!!!! also the video said that the new flywheels work well with Mega darts, so can you feed them into the mag like you can on some other Rival flywheelers like the Perses?

@outofdarts 7 ай бұрын

Yes, you can still put Mega darts in rival mags. However, if you're more experienced in design, they'd be great in a dedicated mega dart-firing flywheeler!

@GM_Mack 7 ай бұрын

@@outofdarts I'm not experienced at all but thought it would be fun to spray a few through the Juno 😜

@britishrex5515 7 ай бұрын

I wonder how difficult it would be to arm mount this...

@carfar4775 7 ай бұрын

one question I have is that when using this at a high rate of firer would it have higher fps then the Jupiter with the same pusher when under load from a proton pack

@blendervendor2220 7 ай бұрын

Looks like I need to buy 300 spools of petg and get myself one

@thekailwolfsinshow8374 6 ай бұрын

may i ask how much these 15 round rival mags are and if they can be used in the pathfinder?

@vape42 5 ай бұрын

woud there be a way to reverse current to the vaccum motor so it sucks balls in? Thatd make loading way faster and cooler.

@RatkingNyxu 4 ай бұрын

If this proves successful, will you consider making Little Rocket barrels open-source?

@SignalBoost 4 ай бұрын

I'v got a juno and I'm interested in the Juno's Fury. Any chance we can get an update on that?

@LieutenantRatty 2 ай бұрын

Make it into a sidecar blaster like herja

@mitchhifi9192 7 ай бұрын

Wish you kept the adjustable hop up :(

@simondavanzo4716 7 ай бұрын

Will the photon wheels fit in the existing Jupiter flywheel cage? Or will a Juno cage fit in a Jupiter?

@turokhunter22 7 ай бұрын

Probably not and No. The wheel are taller so it will misalign with the feeding.

@KenshinPlayz57 7 ай бұрын

Do photon wheels work in other rival blasters?

@turokhunter22 7 ай бұрын

Directly? No. The wheel size is similar to short and full-length darts. Standard rival wheels are much more significant. You can always request OOD to make changes for a particular blaster.

@chrisfletcher1990 5 ай бұрын

Will the proton pack follow the same route of being open source for this?

@Facewizard13 7 ай бұрын

Mags and ammo, that's my big concern. I don't know where to find either of those anywhere. I had assumed rival was dead so I moved on to half dart blasters. Where can we get mags and ammo?

@outofdarts 7 ай бұрын

We have ordered a bunch of worker 15-round rival mags and their rival-compatible rounds to supply anyone who is purchasing a Juno. Additionally, to our knowledge, all three major brands still have rival-style rounds on store shelves.

@flywheel_mistress 7 ай бұрын

would it be possible to make a version which works without the photon wheels (although it would be worse with hurricanes)? that way it would be possible to self source without having to pay £45 for a £16 item... (uk import tax)

@phantomzoneminecraft6120 7 ай бұрын

I would love to print one, however what size motor does it take? :)

@outofdarts 7 ай бұрын

The flywheels are standard 130-sized motors and the pusher uses an N20 gear motor.

@Nishye501 7 ай бұрын

If you said this I didn’t catch it, but what will be happening to the Jupiter in the shop?

@frozenfade 7 ай бұрын

I want a proton pack so bad....

@somerandomdragon4655 7 ай бұрын

the og looks cooler

@codyhuntley4855 7 ай бұрын

You should make a nerf barrel with flywheels so anybody can take their stock Nerf gun and make it better

@AJTheNerfLover 7 ай бұрын

Does it work with proton pack

@xxBLUx 7 ай бұрын

How picky is it with all the cheap/crappy HIR balls out there. It gets old trying to sort out the crappy balls that tend to jam in the pusher mechs.

@outofdarts 7 ай бұрын

We still do not recommend new Headshot rounds because they are too stiff and could stall the flywheels.

@turokhunter22 7 ай бұрын

I am not sure. I have tried all types of balls I had including the blue smaller rounds. What I can say is the wheel has larger concave, they are closer together and the pusher guides the balls closer to the center instead of pushing only off the wall.