Yes! I've tried different things but 3d printed spacers have been the easiest. Plenum I've calculated is between 600 and 700 CC

Awesome, I'm working on a Talon with an E-bay regulator, hopefully I'll get a chance to make a video on that build as well!

@@cormastar well...I'd done the same with my Talon Too... they Both have a Aliexpress Regulated Valve...

I was restricted by the buffer tubes dimensions for the stock to fit, came out to approx 88cc. Homemade valve, and as for the numbers it's proof you don't need 4k unregulated to make power. Check out kzfaq.info/get/bejne/eq2lqZCJ2tayfmg.html

@@cormastar yeah I agree. I have mine set to 2550 psi and I'm getting about 105 fpe shooting 60gn slug at 895fps in .25 cal. If you feal like you ever want to sell a barrel kit for the fx liner deal I would be interested. Also I have the same issue with my huma reg and filling restrictions. Luckily the version I had made has lots of extra fill ports lol. I found a should piece on ebay that had female m18 threads on the top and male m18 on the bottom. Basically I just had a air cylinder cut to length and had a adapter made to thread into a huma inline reg. Everything is rated for 300 bar fill but I only go upto 250 because of the huma rating.

Keep your eyes open for the next video, I do some overview of condor. "Hint it's not a LW barrel"

Tank is from eBay I'll link it for you, the valve I made myself, I modeled it on what I could see of a Doug Noble valve. www.ebay.com/itm/363426201576

I have a long history with paintball and HPA gear, so when PCP airguns came along, it was a natural fit. The Pic rail is a stick of 5/8 rail blank that I machined a slot to fit over the dovetail. Drilled and tapped the dovetail to bolt it on.

@@cormastar Same! I went from multiple time national champion paintball player to airgun competitor nowadays! There is no prize money in paintball and greed has ruined competing - total clownshow to go win a national event and your prize is "free entry" to the next one.... Oooof. Plus I am getting old and 25+ years of paintball has left my body pretty messed up... That's a good way to do it with the solidly mounted rail you did. I don't have machine shop access so mine are all bolt on. I've got a video coming soon for some crazy regged Condor setups....

I built it this way to have more regulated air capacity, the tank is held on by scope mounts. I designed the plenum like an A1 carbine buffer tube to fit the Magpul UBR stock. The UBR is a bit heavy so I threw on a strike industry modular for now. Thanks

Yes, The Condor is running an Altaros regulator I bought off eBay, I have also used a China regulator from eBay as well.

It works out to about 88cc, little bigger than an FX at 72cc.

The HPA tank under the barrel has some scope rings holding onto an Altaros regulator with a plug in it. In the stock is a custom titanium buffer tube that acts as a power plenum storing the regulated air.

@@cormastar wow. Just wow. How big is the plenum and what pressure is your Altaros set at? I'm trying to regulate my Escape but the stock regulator plenums are just too small.

@@mountainairgunner2067 I totally agree, for light pellets it'd probably work fine but pushing slugs you need the volume. I measured it out to be approximately 80cc of regulated air and had the reg right at 2100psi. If I do an A1 or A2 style buffer tube instead of the carbine it'd be well over 100cc.

At you Thai? Or from SE Asia? I went there in college and I recognize some of the characters in your text