The Perfect Outfeed Table\Workbench With Only 2x4's and Plywood
Рет қаралды 455,992
DIY Mobile Out-feed Table/Workbench for the DeWalt 10" DWE7491 Table Saw. Built in Drawer. Original Sawdust Collection without a vacuum. Built with unique leveling casters. all done with 2x4's and plywood, no special tools.
If you want to support the channel click a link to purchase any item you're interested in. From the purchase I make a very small amount and it doesn't cost you anything extra. I am not affiliated with any products used. Anything I link I recommend and I use myself.
• DEWALT 10-Inch Table Saw: amzn.to/3QAGPNK (Amazon)
• Swanson Tool CG100 Cutting Guide 100-Inch: amzn.to/3tIUgSM (Amazon)
• Leveling Casters Set of 4 Heavy Duty: amzn.to/40gxduH (Amazon)
• Bosch Jigsaw: amzn.to/45Qjufe (Amazon)
• 3M Xtract Cubitron Sand Paper: amzn.to/4738ts0 (Amazon)
• MAXPOWER Rubber Mallet: amzn.to/3QivosP (Amazon)
• Bosch 1617EVSPK Wood Router Tool Combo Kit: amzn.to/3QdgKDe (Amazon)
• BOSCH RA1181 Benchtop Router Table 27 in. x 18 in: amzn.to/3Mj283U (Amazon)
• Makita HS7600 Circular Saw: amzn.to/3Fyvsj6 (Amazon)
• Kreg KHC-Premium 3-inch Face Clamp: amzn.to/3FAtNJR (Amazon)
• Kreg R3 Jr. Pocket-Hole Jig System: amzn.to/3QynRaG (Amazon)
• Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes: amzn.to/3FykwlJ (Amazon)
• Makita BO5030 5" Random Orbit Sander: amzn.to/3Si0bs7 (Amazon)
• Heavy PVC Dust Collection Hose 2 1/2" x 20': amzn.to/3tRUp6A (Amazon)
• Akfix 705 Fast Adhesive CA Glue: amzn.to/46KJQ3G (Amazon)
• 1 Pair Soft-Close Drawer Slides 20 Inch: amzn.to/3s7gPjL (Amazon)
• WEN CL436R 4-Inch Right Angle Clamp: amzn.to/3tSyI6r (Amazon)
• CMT 251.042.10 10-Inch by 42 Tooth: amzn.to/3Ml9JPg (Amazon)
• Varathane Diamond Wood Finish: amzn.to/40aBM9S (Amazon)
Thanks for watching. This video has taken months to create so we hope you enjoy. We are hoping the audio turns out alright as we had a dying freezer in the background, which we didn't notice until we went to edit!
The size of the outfeed table is 88” long. 45.5” wide and 35.5” tall without the casters. 39” tall with. It took about 3 sheets of 3/4" plywood and roughly 20 2x4's With the drawer and sawdust collection you'll need another sheet of plywood
If you enjoyed this enough to read this far hit the like and subscribe button :)
0:00 Outfeed finished
0:07 Making 3x3's
2:00 Lap Joint
2:40 Assembling the Frame
9:17 Leveling Casters
10:38 Lower Storage
13:33 Assembly of The Work Bench
15:30 DeWalt Shelf
16:47 DeWalt Stopers
17:45 Arm Extensions
20:20 First coat of Polyurethane
20:46 Drawer Assumably
21:13 Second coat of Polyurethane
26:03 Sawdust Collection
30:56 FINAL coat of Polyurethane
31:14 Putting on Trim
33:51 Final Product
@daviddeupree4677 6 ай бұрын
Thanks!
@WeReno 6 ай бұрын
@daviddeupree4677 Thank you! This is the very first time we have gotten this kind of support. We greatly appreciate it! It won’t be forgotten!
@lharty6892 3 ай бұрын
I love the vid format. 1. Show finished product first 2. Fast motion 3. No endless talking Most people just want the nitty gritty of how you built it.
@WeReno 3 ай бұрын
Thank you so much. One problem though, A LOT of people have now requested I explain (talk over) on how I built it and dimensions etc. Will be building a mitre station soonish. Same style but might have over talking.
@stanvanrensburg4452 3 ай бұрын
@@WeRenoBut you did give the dimensions all that is needed is some simple arithmetic. Thanks for the great video.
@spdd081603 6 ай бұрын
ABSOLUTELY the BEST video I have seen to date about the entire process of building one of these.... VERY WELL DONE!!
@WeReno 6 ай бұрын
Wow, thanks! I’m so glad you liked it. Thank you for watching!
@crazykittenvideos855 4 ай бұрын
A ton of softwood, copious amounts of screws and glue and you have created a masterpiece! Top work!! Love it!!
@WeReno 4 ай бұрын
Thank you so much! Truly appreciate it!
@danrao3707 4 ай бұрын
Fantastic job! Love the attention to detail. No cord snagging draw pull, off set colored edge banding. 5 stars!
@WeReno 4 ай бұрын
Thank you so much! Also thank you for watching.
@ewright444 4 ай бұрын
I’m an absolute novice at woodworking. I learned so much just from watching this video. Great work!
@WeReno 4 ай бұрын
Thank you so much. Don’t be worried about being a novice, so am I. Jump in and try, I bet you’ll be surprised about just how well you can do. Also expect mistakes. The video you see on here usually don’t show them. It’s normal and it will happen.
@gmailgjkc3409 4 ай бұрын
Love it, I am about to take my disaster of a garage where nothing is organized and make it into a workshop. Thank you for sharing your the idea and inspiration.
@WeReno 4 ай бұрын
No, thank you for watching and I’m glad I could help!
@user-cq4qe1qr4l 10 күн бұрын
Watched a lot of table saw bench videos and yours is the one by far the best one I found, awesome! Great work,
@WeReno 10 күн бұрын
Thank you so much! We greatly appreciate the kind words and support! Stick around, miter station video will be coming soon(ish)
@robertontko8588 5 ай бұрын
On the edge of my seat for the whole video. Fantastic.
@WeReno 5 ай бұрын
Thank you! Check out or latest. Our first cabinet.
@kenwenuk7123 4 ай бұрын
Thank you for taking the time to make the video, I know ow what effort must have gone into the editing. The table is amazing and I love the detail at the end covering all the ply edges.
@WeReno 4 ай бұрын
Glad you enjoyed it! And yes a lot of editing went into this video! 27 hours of footage!
@WeReno 6 ай бұрын
No problem! Good luck on your build 😊
@kyriakosdimitrakis1891 3 ай бұрын
Excellent! I might replicate it for my 7492! Also love the old XRP DEWALT DRILL! Built to last a lifetime!!!!
@WeReno 3 ай бұрын
Awesome I hope it turns out well for you! Yeah that drill has seen some days
@timhalleran3514 3 ай бұрын
Stunning results!! Strong work!!
@WeReno 3 ай бұрын
Thankyou! Very appreciated!
@kastellokalanchuk6504 Ай бұрын
that's right, less words, more action. Well done.
@WeReno Ай бұрын
Thanks! Glad you enjoyed it.
@Bluuuz 2 ай бұрын
Awesome workbench. Almost exactly what I want to build. I’ll be watching this a few times. Thanks from the UK.
@WeReno 2 ай бұрын
No problem! Hope your build goes well
@brianmurray667 4 ай бұрын
One of the best designs I’ve seen. Simple and clean.
@WeReno 4 ай бұрын
Thank you we really appreciate that!
@bobgaines2399 3 ай бұрын
this is the best video I've seen on building an outfeed table! Thanks for sharing it. I will be building mine based on your table. God bless you both, keep the videos coming
@WeReno 3 ай бұрын
Thank you for the compliment! Hope your table turns out well! Thanks for watching and appreciate the support!
@DIGOLOGIST 4 ай бұрын
Dude..... That is a awesome build !!! And then the wife joins in ! Great teamwork and run off table. I will be looking at this video a lot to build one myself. thanks.
@WeReno 4 ай бұрын
I’m glad you enjoyed! Thanks for the support and I hope your build goes well!
@achardjc 4 күн бұрын
Great job. The 4x4's look good and you could park a truck on it. Like the extra touch of the dark stained edge banding. Nice contrast.
@WeReno 3 күн бұрын
Thanks! Definitely turned out better than I hoped it would. And yeah you could park a cement truck on it lol. Thanks for the support!
@ToxicDover 5 ай бұрын
Turned out awesome!!
@WeReno 5 ай бұрын
Thank you so much!
@TonyFerrera Ай бұрын
Great design and build ! I have wathced quite a few table saw work bench builds as I am getting ready to make one of my own. I had not chosen one until now. Thank you
@WeReno Ай бұрын
First off thank you for the support. It helps more than you know! Not only financially but also as a motivator. It shows that we must be doing something right. I’m so glad that we could help you. If you have any questions feel free to ask. Thanks again from both of us.
@terrybollenbaugh7622 6 ай бұрын
I really like your design. Very well done.
@WeReno 6 ай бұрын
Thank you so much. I appreciate that, and thanks for watching.
@deaganz5740 5 ай бұрын
Well done. Looks beautiful
@WeReno 5 ай бұрын
Thank you so much!
@enry7860 6 ай бұрын
Bellissimo, Fantastico... Complimenti !!!!
@WeReno 6 ай бұрын
Thank you so much! 😊
@dlk4318 2 ай бұрын
it was truly a pleasured to see with how much joy you made this excellent workbench
@WeReno 2 ай бұрын
We are glad you enjoyed!
@gregoryminchik 4 ай бұрын
Great build man. Was very captivated by this video
@WeReno 4 ай бұрын
Thanks for watching 😊
@ScottishPhotographyCentre 4 ай бұрын
Top job.... Loved watching this one...
@WeReno 4 ай бұрын
Glad you enjoyed it and thanks for the support!
@bojanglesobrien6883 6 ай бұрын
Commenting for channel support. Nicely done
@paulobezerra9761 6 ай бұрын
Great job! Congrats from Brazil.
@WeReno 6 ай бұрын
Thank you! 🤩
@EdgarKalwies Ай бұрын
The best workbench idea & video! Thank you!
@WeReno Ай бұрын
Thank you for the support! We do this for fun so we are glad we could help.
@moldyzucchinis3251 4 ай бұрын
Love to see a nice circ saw lap dado & clean up with the chisel. simple but effective for a shop project.
@WeReno 4 ай бұрын
Thanks! We appreciate that and thank you for watching!
@joegutierrez4197 7 ай бұрын
Beautiful!! Blessings!!!
@WeReno 7 ай бұрын
I’m glad you like it. Thanks for watching. 😊
@azucar151 4 ай бұрын
Thank you for putting the effort into making such a detailed video for an awesome build... Subscribed
@WeReno 4 ай бұрын
Thanks for the support! I’m glad you enjoyed!
@Bobthewatchpeoplebuilder 7 ай бұрын
This is top three best outfeed tables I’ve seen on KZfaq. Especially only using 2x4’s and plywood. Great job!
@WeReno 7 ай бұрын
I wouldn’t say that but I think it turned out well and I am proud of it. Thanks for watching
@johnjkizer6399 4 ай бұрын
Wow, that is a nice setup you got going there
@WeReno 4 ай бұрын
Thank you very much and thanks for watching. Love and appreciate the support.
@spuds6423 5 ай бұрын
Wow!;! This guy works fast!!! 😂😂😂😂
@WeReno 5 ай бұрын
lol, from none to done in under 40min
@denniscarreno5882 7 ай бұрын
Job well done guys!
@WeReno 7 ай бұрын
@denniscareeno5882 Thank you. Also thanks for taking time out of your day to watch, it’s appreciated!
@carloslizardi471 3 ай бұрын
Definitely getting a set of those casters! Awesome table! And Awesome video format.
@WeReno 3 ай бұрын
I highly recommend them. Best thing I’ve used. Thanks for the support, means a lot.
@Midmo 4 ай бұрын
Whoa! Nice!
@WeReno 4 ай бұрын
Thanks for watching!
@rodneyhightowerjr.4327 5 ай бұрын
Dude, hell of a job on this! Your attention to detail is great and I know it was a lot of work. This is the exact bench I want for my Dewalt saw and would love to grab some plans if you have them. GREAT JOB!
@WeReno 5 ай бұрын
Sorry, I don’t have plans. I winged it as I went. I knew the size I wanted and that’s it.
@rodneyhightowerjr.4327 5 ай бұрын
@@WeReno what were the total width and length once everything was finished?
@WeReno 4 ай бұрын
I’m so sorry @rodneyhightowerjr.4327 I didn’t see your message. The measurements are now in the description.
@user-es5de3wr4r 3 ай бұрын
Solid perfect design. Wonderful partners, wonderful job.
@WeReno 3 ай бұрын
Thank you we appreciate that so much. Thanks for the support!
@fishinman539 4 ай бұрын
Wow beautiful! New to word working this is def way beyond my skills ! One day hopefully
@WeReno 4 ай бұрын
I bet you it’s not! It really not that hard. When I started this project I had been wood working for only a couple months. Don’t be scared to fail and you’ll probably surprise yourself when you succeed.
@gordonmclean2794 5 ай бұрын
Very Nice!
@WeReno 5 ай бұрын
Thank you! 😊
@Mgoblueindy69 4 ай бұрын
What a kick ass build! Great job!!
@WeReno 4 ай бұрын
Thanks we appreciate the support! Need to ask would you have preferred a different style of video? Over talking, explaining how I built it etc? Or is the ASMR part of what you liked?
@Mgoblueindy69 4 ай бұрын
@@WeReno For me as a newbie woodworker (who is planning on a table saw/Miter Saw build like this), some explanation/narration would help. But I like it was all done with no special tools.
@WeReno 4 ай бұрын
Awesome! Thanks for your input. We greatly appreciate it.
@Joey.Darkwoods-Studio 6 ай бұрын
Nice work table!
@WeReno 6 ай бұрын
Thank you 😊 and thank you for watching!
@Lucagricole 4 ай бұрын
Ingénieux et jolies finitions 🤩
@WeReno 4 ай бұрын
Thank you so much. We appreciate the support
@noahleonard6075 29 күн бұрын
This was a wonderfully edited video and one of the best table saw benches I’ve seen. Gives me some good inspiration for what I want in my shop
@WeReno 29 күн бұрын
That’s awesome! I’m so glad you enjoyed it!
@IGLinc 5 ай бұрын
Unbelievable man that was just awesome. And help from a your wife/partner great job.
@WeReno 5 ай бұрын
Thanks. I appreciate that! She is a huge help. On the built-ins we are working on now she build several of the cabinets on her own.
@MrIg3845 2 ай бұрын
Fine job, you two!👍
@WeReno 2 ай бұрын
Thank you so much. We appreciate the support!
@woodmaster21 Ай бұрын
just built a similar workbench based on yours but adapted for the 7485 table saw.Worked perfect, thank a lot for your prework 😄😄
@WeReno Ай бұрын
That’s awesome! Glad you liked it enough to do that and I’m glad it works perfect for you!
@mattw6597 7 ай бұрын
Am going to make one myself, therefore have watched plenty of videos like this, but man! That is the best video I've watched by far! No fancy tools that you would need to buy only to make one cut, no super duper materials. Just made it plain and simple! Don't even need drawings for that as the video shows it all and everyone can do it to their own dimensions. Thank you for posting it, kind Sir! I just found what I was looking for! 🥰💪
@WeReno 7 ай бұрын
@mattw6597 yes sir. Someone else asked for plans but I told him exactly what you said. Thank you so much for the compliment. You made my day! ☺️ There is one step missing. It’s in my lap joint short. Cause it was filmed 9x16”
@KikaWaiAlae 6 ай бұрын
@@WeReno Aloha guys, I totally agree that plans are not necessary rather a nice thing to have for some. I have purchased many plans from KZfaq university in the years just for the ideas. What I would like to know from you tho are the dimensions of the table top. It doesn't appear to be a full sheet but looks like the perfect size to have. I have also watched and compiled several links to KZfaq table saw builds and by far yours seem to be the one design that I will build for that reason. Of course I will fine tune it for my style of working but your style is closest from what I can see. Also this is the first video of yours that I watched and the first time it popped up in my suggestion area. I immediately subscribed and will probably end up binge watching your channel @nite for more ideas and plain entertainment. You both rock! Oh, Iʻm an old man, 7 decades old and have been married to my wife for 50 years now and I enjoy learning every day. Mahalo
@WeReno 6 ай бұрын
@@KikaWaiAlae thank you so much I appreciate the support. We are new to KZfaq only 3ish months and new to woodworking about the same amount of time. The table top is 45.5" by 88" or 116cm by 224cm.
@KikaWaiAlae 6 ай бұрын
@@WeReno you’re welcome! You both are doing a great job on your video and editing as well as woodworking skills. I began learning and starting carpentry business in the early 1970’s in Houston TX. I believe that on the job training is far superior. I left my home, the Hawaiian Kingdom back then to pursue what I enjoyed doing. I’m now kicking back in Pahrump NV prolly till I die. They’ve called Pahrump the waiting room as far back as I can remember. This is once a place where old folks would live while waiting to die. Lol. Its now my turn. But in the meantime I have my hobbies that keeps me occupied. 😉
@WeReno 6 ай бұрын
@KikaWaiAlae that’s awesome. Sounds like you had a great life.
@lharty6892 3 ай бұрын
I’ve looked at 10 or more designs and like yours the best, although I’m thinking of making one change. Instead of the triangle supports, I am going to make 2 long, tall, skinny boxes with a shelf and place them to the right and left of the saw, and then mount the small plywood pieces directly to the top of the boxes. This will work for me because I need to make my workbench wider than yours to fit my space. I can use these shelves for push sticks, feather boards, offcuts, etc. I plan also to put some pegboard or hooks on the outside of the boxes for more storage. Might also make 2 sliding trays instead of one large drawer for my cross cut sleds. The possibilities are endless, but your design will definitely be my base. Thanks for the great video!
@WeReno 3 ай бұрын
Glad to hear our video was helpful! Good luck on your build! Hope it turns out!
@gilesreb 7 ай бұрын
Awesome build!
@WeReno 7 ай бұрын
Thank you so much. I appreciate that. It’s was a lot of work, but I feel it paid off.
@Bobthewatchpeoplebuilder 7 ай бұрын
Agreed!
@patrick_jouno 4 ай бұрын
Absolutely Brilliant love the video and your work.
@WeReno 4 ай бұрын
Thank you so much we both greatly appreciate it. Would you have preferred over talking with some explaining on what I was doing or keep the ASMR aspect?
@patrick_jouno 4 ай бұрын
Yes a little over talking would of helped a lot actually but still loved the video for its simplicity@@WeReno
@WeReno 4 ай бұрын
Thanks so much! @pattrick_jouno
@Renochick6896 7 ай бұрын
Wow…you guys outdid yourselves! Beautiful!
@WeReno 7 ай бұрын
Thank you for all your support!
@jonmccain9354 3 ай бұрын
Great Job ❤
@WeReno 3 ай бұрын
Thanks.
@emilianogabriel9613 7 ай бұрын
Great job and very nice finished
@WeReno 7 ай бұрын
@emilianogabriel9613 Thank you, I appreciate that. Thank you for watching!
@piotrsawicki8812 4 ай бұрын
Good job!
@WeReno 4 ай бұрын
Thank you!
@henryhurtado2035 3 ай бұрын
Congratulations for your job
@WeReno 3 ай бұрын
Thank you. Thanks for the support!
@lasaraungbakri7386 23 күн бұрын
This is brilliant!
@WeReno 23 күн бұрын
Thank you! We appreciate that very much. Stay tuned. Next big build is a miter station.
@ryanortiz7077 6 ай бұрын
You sir earned every sub!
@WeReno 6 ай бұрын
Thank you so much! Also thanks for watching, we apricate the support!
@JaayEmm 4 ай бұрын
Great video - great build... best of luck for future projects.
@WeReno 4 ай бұрын
Thanks so much! Thanks for the support
@ghostsniper2099 19 күн бұрын
I have the same saw but an older version and want to build one of these. Have looked at several vids and I like yours the best. Nice work!
@WeReno 19 күн бұрын
Thank you so much! That means a lot to us. Stick around. In a couple months we should have a miter station build.
@samuelclark7179 5 ай бұрын
Cool build! I sprinkle a bit of salt into my glue-ups, to keep the pieces from sliding across each other
@WeReno 5 ай бұрын
That’s a great idea. Thanks for that.
@abad_gtr1123 7 ай бұрын
i also have the 7491 so i love seeing what people are building for them. this was a great build...would love something this size myself but just don't have the room.
@WeReno 7 ай бұрын
Thank you 😊
@davidjones702 26 күн бұрын
Absolutely beautiful work. I think I want this exact table. Only with a flip top for my chop saw. Gorgeous work my friend. This beers on me 🍻
@WeReno 26 күн бұрын
Thank you so much! We greatly appreciate that!!! Cheers! 🍻
@brigitteprovost4306 3 ай бұрын
Beau travail, cet établi est superbe! Bravo à vous deux👍👍🙏
@WeReno 3 ай бұрын
Thank you for the comment and for watching ❤️
@40redfox40 4 ай бұрын
WAIT…You built this awesome bench without using a single tool from Festool 😂. Great quality work on this. Thanks for sharing.
@WeReno 4 ай бұрын
Thanks and thanks for watching. I’m too poor for festool.
@missingMBR 4 ай бұрын
😂
@rasmushansen3701 3 күн бұрын
Not the tools but who and how u use them.
@PaddyDoc 5 күн бұрын
Cracking bench pal, nicely done ✊
@WeReno 5 күн бұрын
Thank! Appreciate that!
@JonSauter 7 ай бұрын
Beauty! I would store those portable AC units on their wheels though.
@WeReno 7 ай бұрын
Thank you, I appreciate that. Thanks for the heads up. I’ll have to look into that.
@checkoayala 3 ай бұрын
Looking good
@WeReno 3 ай бұрын
Thanks! We greatly appreciate the support!
@raybrown2771 2 күн бұрын
Very nice. I wish plywood was cheaper.
@WeReno 2 күн бұрын
You and me both!!!!!! It’s nuts!
@milosgrujic9118 5 ай бұрын
Its just factory quality done at home! Great!
@WeReno 5 ай бұрын
Thank you so much! Also thanks for watching and the support!
@gerrymcintosh4477 Ай бұрын
Looks nice. Very good job. 🇨🇦💝🙏👍
@WeReno Ай бұрын
Thank you so much. We appreciate that!
@doganatay2735 7 ай бұрын
Awesome job. Adding miter slots to your outfeed table may be a next addition idea.
@WeReno 7 ай бұрын
Thank you! I appreciate that. Agreed 100% will, still need to make a miter sled as well.
@user-mu7vq8xj3o 3 ай бұрын
Классный семейный подряд и как результат отличное изделие!!Молодцы!!!
@WeReno 3 ай бұрын
Thank you for the supportive comment and for watching!
@timhalleran3514 3 ай бұрын
I had to subscribe!! Love the design. I want to build something similar with the out feed table being separate. Design an attachment to put the two tables together when ripping long pieces. This will work better for my limited space! Thanks for this video! "Inspired"🙏
@WeReno 3 ай бұрын
That’s awesome to hear! Thanks for watching!!! And good luck with your build!
@newt2010 3 ай бұрын
Very nice. I have the same saw and currently working on a design for a table top to go around my saw as well. I really like yours. Cheers
@WeReno 3 ай бұрын
Thanks! We appreciate that! Hope yours turns out well
@henryhurtado2035 3 ай бұрын
Congratulations 🎊
@WeReno 3 ай бұрын
Thank you!! Appreciate the support.
@nore8141 Ай бұрын
Nice work ❤
@WeReno Ай бұрын
Thank you! 😊
@ResponsiblePledge 4 ай бұрын
9:20 those are nice casters. Like really nice, I have those same casters on 4 of my CO2 extraction machines lol
@WeReno 4 ай бұрын
Agreed they are awesome!
@Nicothomaides 6 ай бұрын
This is quality buddy Welldone
@WeReno 6 ай бұрын
Thank you so much. I’m glad you like it.
@FKproduksi888 2 ай бұрын
Ini keren sekali om...good for you...masih bermimpi mempunyai workbench..
@WeReno 2 ай бұрын
Honestly it’s not that hard or expensive (if you have the tools) just need the space.
@FKproduksi888 2 ай бұрын
@@WeRenothanks bro..
@ramgharyaroyals1058 4 күн бұрын
Wow good job
@WeReno 3 күн бұрын
Thank you so much. It means a lot to us.
@goro222 6 ай бұрын
Top parabéns pelo seu trabalho 🇧🇷
@WeReno 6 ай бұрын
Thank you so much. I greatly appreciate that. Thanks for watching!
@scalzykfunk1492 4 ай бұрын
Bonjour Jason et bien que dire un boulot de fou tres joli travail l escalier du cousin claque te revoila et c est ce que j aime dans ta chaine du vrai bricolage ca valait le coup d'attendre j attend la suite avec grande impatience 👍👍👍
@WeReno 4 ай бұрын
Thanks for watching! Appreciate the support!
@philgreen9262 4 ай бұрын
Great! I just had to make the T-tracks on the continuation of the table. When using a protractor, it is very necessary
@WeReno 4 ай бұрын
T track would definitely be helpful. Thanks for watching.
@neliorodrigues2249 4 ай бұрын
Muito bacana ficou excelente seu projeto BANCADA PARA SERRA FOI UMA ótima apresentação e muito boa à demonstração valeu obrigadao 🎉🎉🎉🎉
@WeReno 4 ай бұрын
Your welcome. Thanks for taking the time to watch it. Very appreciated!
@TheScanonDub 3 ай бұрын
I'm about to embark on my mission to build a workbench and will base my idea on your table. I want to incorporate a miter saw and vice, but this is a good start. Thanks! 🙏🙏🍺🍺🍺🍺😎
@WeReno 3 ай бұрын
Good idea! Good luck with your build! Thanks for watching!
@rafajezierski5028 6 ай бұрын
Perfect work, congratulations. Thank you for inspiration.
@WeReno 6 ай бұрын
Thank you for the comment and watching. Means a lot. Good luck on your build. 👍
@MarshallLoveday 6 ай бұрын
Nice job! I've got the exact same DeWalt saw, and I'm still using the portable stand. Once I'm able to get caught up with some pressing home projects, I'll build out my garage shop, including a table for the saw.
@WeReno 6 ай бұрын
Sounds great, You'll have to let me know how that goes!
@carterscustomrods 3 ай бұрын
Does this guy ever stop talking? 😅😂😂😂
@WeReno 3 ай бұрын
Never! Haha! Thanks for watching
@edisonperez5556 Ай бұрын
Bendiciones, excelente proyecto, te felicito
@WeReno Ай бұрын
Thank you so much. We appreciate the support. Miter station video coming soonish.
@danielaragon5755 7 ай бұрын
That's a great looking work table!
@WeReno 7 ай бұрын
Thank you! I’m glad you like it
@Bobthewatchpeoplebuilder 7 ай бұрын
Agreed!
@mjf1036 6 ай бұрын
beautiful build. Genius to use the 2x4 side cut offs as edge banding. this is exactly the design I have been looking for. I am moving to a larger shop and now will build a table saw and outfeed table combo like yours. time to ditch the flip top cart the dewalt lives on now. Thanks!
@WeReno 6 ай бұрын
I’m so glad you enjoyed. I’m glad you found what your looking for. Let me know how yours turns out!
@anglobricks9086 2 ай бұрын
Very nice 👍🏻
@WeReno 2 ай бұрын
Thank you very much. Greatly appreciated.
@SimonetteAutoDetailing 4 ай бұрын
This is an amazing piece. Ever think about adding holes for bench dogs? Was a thought as I was watching. Wondering if it would work.
@WeReno 4 ай бұрын
We don’t have any dog hole equipment, but maybe in the future! Great idea! Thanks for watching
@MrFreesearcher 4 ай бұрын
If you want to extend the fence in a cheap way, I added a 1.2m 2060 extruded aluminum to the saw side of the fence. it did mean drilling holes through the original fence, and the push stick had to find a new home, but the new fence could be adjusted either side of the saw, giving more infeed, or more outfeed to suit. I mainly did this because my saw was supplied with a major dent in the fence. It does also mean the saw's measure is out then by 20mm, but I can live with that.
@MrFreesearcher 4 ай бұрын
Oh yeah, you can also use the extrusion to mount stops or clamps if you need as well
@WeReno 4 ай бұрын
Sounds great…thanks for the advise. My future hopefully entails a cabinet saw! Thanks for watching!
@aerialrescuesolutions3277 5 ай бұрын
Excellent build. You sure love pocket holes, keeps a clean appearance.
@WeReno 5 ай бұрын
I won’t lie pocket holes are my favourite type of joinery. Couldn’t have done almost any of the builds I’ve done without it.
@KnottenWood 5 ай бұрын
Great job on the bench. Sturdy for sure. Hope you never decide to make a new one, you’ll never get this one apart.
@WeReno 5 ай бұрын
Definitely won’t be able to take it apart, will have to either give it away or burn it. Thanks for watching. I appreciate the kind words!
Jason Derulo
Рет қаралды 10 МЛН
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 189 М.