No video

The PN 2.5W Chassis. By KK.

  Рет қаралды 12,405

EXPIOWA

EXPIOWA

4 жыл бұрын

This video in an introduction to the PN 2.5W chassis in case you are not familiar with it. It is a decent upgrade and at the time this video was made costs about $30.
Check your track rules to ensure that it is legal for the class you wish to race. Some tracks don't allow it until you get into the Modified or even Open class. I like to use mine for trampling the dreams of racers who run brushless motors and race against me. 👍😜 Lol
It is a direct replacement for the stock Kyosho Mini-z chassis. All of the internal parts including the steering servo gears go right in. I believe it is stronger and stiffer than stock Kyosho.
Note: This chassis is too wide for use with the Toyota GT One, and McLaren 12C GT3 body unless you are willing to modify it. The batteries are carried wider and it physically will not allow the rear of the body to go down over it. Test fit any body over the PN 2.5W BEFORE you begin taking the first screw out of your current chassis.
All of my videos are work and kid safe. Watch with confidence.
Enjoy She Show! 🙂

Пікірлер: 15
@younghochoi1282
@younghochoi1282 4 ай бұрын
I am a beginner of Miniz. What is the orange rectangular thing on top of the car? Thank you for your video!
@EXPIOWA
@EXPIOWA 4 ай бұрын
That is a transponder so the timing system can uniquely identify your car and record your laps.
@rogerserafin
@rogerserafin Жыл бұрын
Thank you for this. I was always wondering about the 2.5w chassis.
@EXPIOWA
@EXPIOWA Жыл бұрын
You are welcome. I am not sure it's better. It is just different. It won't fit under certain bodies though. The Toyota LMS 102mm body is one.
@BMR3
@BMR3 4 жыл бұрын
0:36 this is the philosophy I base all my build on. In my experience, red is fastest but closely followed by gold.
@BMR3
@BMR3 4 жыл бұрын
Great video, I’ve been really enjoying your content. I have been eye balling one of these 2.5W chassis, but I don’t have a local track to race at so I don’t need one. I just think they look sweet I appreciate your honest opinion that you don’t notice much of a difference. All I hear is hype around these chassis
@EXPIOWA
@EXPIOWA 4 жыл бұрын
One of my best racing buddies and I started our own track. We ordered 2 Wide Ls, a Large Radius Oval and he also ordered 25 blank square RCP tiles to make massive straightaways 3 tiles wide. We also ordered our own timing system. It cost about $1300 so far and we are not done yet. 👍 It is approaching epic! : ) Don't let anything stop you. Decide, and then go do it! Do not rely on other people to provide you with what you want. - Unless you live near me, then let's go racing! 😉
@censorydep
@censorydep 2 жыл бұрын
@@EXPIOWA I did almost exactly this, although I haven't splurged for the large oval. My wife has let me set up most of the two L's inside (I know, lucky guy), but I have dreams of building a larger platform in the garage that I can raise and lower. Out of curiosity, two years on, how is it going with your track? Any storage, maintenance, or other tips? Once I have something decent setup I am hoping to start having neighborhood track days, but it will be a while...
@narrowempress1625
@narrowempress1625 4 жыл бұрын
What is the wheelbase for this?
@Mao_tse_tung
@Mao_tse_tung Жыл бұрын
I did a conversion from mm to lm and now the dif rear axle has side to side play like 2 mil is that normal?
@EXPIOWA
@EXPIOWA Жыл бұрын
The LM axle is wider than the others. You will need the narrower axle shaft. The gear diff is the same on both.
@pmm4177
@pmm4177 4 жыл бұрын
Do you think this is a faster chassis vs box stock?
@pmm4177
@pmm4177 4 жыл бұрын
Btw, I had a blast racing with you last night man! Thanks for waiting for James and I
@EXPIOWA
@EXPIOWA 4 жыл бұрын
Possibly. It seems to work well. It is certainly stronger.
@felicianoabe
@felicianoabe Жыл бұрын
Every 1 knows colored parts are faster, very underestimated. Remember with great knowledge comes great responsibility. Add flames to the body and your car will break the dimensions of time and space allowing you to time travel
Must Do Kyosho Mini Z Mod That Cost Nothing
9:36
Mark Santa Maria
Рет қаралды 75 М.
Mini-z Handling Part 2: Correcting Hidden Problems. By KK
9:40
Викторина от МАМЫ 🆘 | WICSUR #shorts
00:58
Бискас
Рет қаралды 6 МЛН
Lehanga 🤣 #comedy #funny
00:31
Micky Makeover
Рет қаралды 26 МЛН
No empty
00:35
Mamasoboliha
Рет қаралды 12 МЛН
PN 2.5 Build Part 3 - PN Racing Double A-Arm Suspension Install
10:23
Mini z Resource
Рет қаралды 19 М.
Watch This Before You Buy Mini-Z “Upgrade" Parts
16:16
Tamiya MF-01X speed tips & shakedown run
6:45
RC Michi
Рет қаралды 178
New parts in for the BZ5 + Track Time!  #bz5 #miniz
9:56
Tjay Mac_RC
Рет қаралды 862
Tamiya TT02 Upgrades - Hard Deck and Carbon Parts
5:30
RC Tamiya Addict
Рет қаралды 502
PN 2.5 Build Part 5 - Disk Damper & Ball Diff Install
6:38
Mini z Resource
Рет қаралды 21 М.
Introduction To Stock Mini-z Chassis (Updated). By KK.
15:44
Kyosho Mini Z - First Upgrades and Tips
16:40
Formula Z
Рет қаралды 20 М.