It cost $120

I was an expecting and out of touch influencer to say "reasonably priced at $350 plus a kidney" but honestly $120 is an insanely good deal for their build quality.

i've had the 215 since january 2021. Love it so much. The large fans on mine are addressable rgb, I had both of them fail after one year warranty was out, both separate times. Both times Lian Li sent me replacements for free and arrived in less than two weeks. Best customer service I have ever had.

I mean that's a cool case but I'd need an office that matches, smelling like leather and fine bourbon, pretty fancy!

It's the "PLEASE DO NOT TOUCH" signs for me

I think Lian Li is my new favorite in the PC space. The innovation with the daisy chained interlocking fans was pretty cool in and of itself. But now wireless control and LCD fans working with normal RGB fans is approaching build perfection. Now only if they could get into custom water blocks or motherboards

"Host: Dennis Liao" Press X for Doubt.

Walnut? I’ll accept nothing less than mahogany.

Just bought a Fractal North case myself, but I'm glad there are non-RGB pieces becoming more popular, or at least being introduced to the market.

I like that 207 case with the fans right below the gpu.

I thought i'ld never find a case that'ld convince me to replace my Corsair Obsidian 450D, but the Lancool 217 just did the trick, what a beautiful case.

Streamer cables are great and all, but what about juicer cables?

I actually rigged two 120mm fans from my old case to the bottom of my liancool old generation for the same idea. Obviously it's not as effective as some of it is blocked by the PSU, but it still brings fresh air from that vent in the bottom directly into the GPU. love it

i love Lian Li so much. really hope they sell the 170mm fan on it's own and/or make an matx version of that case

I love my Lian Li Lancool II Mesh and seeing this other Lian Li case with all the bells & whistles and a really good price is making me wanna build another pc that I dont need. What a neat enclosure

The 207 is great love the ideas, implementation, and layout of the fans provided for that price. I'd love to see a similar idea with the same layout for an almost ITX case. Like a 207 micro that looks like an ITX case, but fits MATX.

I liked that end bit about the power supplies unique i wonder if it functional would love to see some builds with it.

The only problem with filters behind the fans is all the dust that coats the fan - better no filters at all though and just blow it out every once in awhile with air

"Please do not touch", alex is just putting his finger into everything lol

Lancool 207, love the PSU orientation!

I've loved Lian Li since I built a client's graphic design workstation in their brushed aluminium case back in 2002... never owned one, but love their stuff. I think I may upgrade my case fans with the new wireless ones, that's just genius.

I wish there were more mATX cases

The Lancool 207 is freaking amazing, holy shit!

It gives me 70s hi-fi stereo system vibes

They really went with the safe card with the design. Wished they did more "modern" look like Fractal did

Lian Li is seriously the best case maker out there. I've always been a Fractal fan, but Lian Lis innovation is just awe inspiring.

I saw another company had made an AIO with tubes that connected in the middle of the radiator, I can’t remember who it was though. This solution seems better though since you can choose between having them in the middle or just out the end like normal AIOs, as long as there is enough space for that extra bulk along the side of the radiator.

The different orientation of the cables for the power supply confuses me.

i love my lian li case, highly recommend. super easy to build and cable manage with all the space

I love this time of year :))))

What is "back to front support"?

Really like to see something cool with two 5.25 drive bays

This wood grain fetish won't reach it's final form until every case looks like a 1970's 8-Track and Turntable Magnavox stereo receiver that your grandparents used to have. And that still smells like mothballs.

Looks nice. I do wish for a retro case like Lian Li’s old aluminum cases though. I still have one but I’d like modern features like cable routing and better airflow.

So, we are in the 1970's now? every thing with wood :) Need some woodies wagon!

That’s great value. Lian li cases are awesome to build in.

Why TF do case manufactures put usb ports in the dumbest places.

We need more room at the top of cases since MOBO manufactures constantly put connectors at the top lip of a mobo, which get obscured by radiators and fans.

best video for the moment at Computex 2024

I cant eait for the power supplies and the O11 Vision Compact. That is 1000% the perfect case ive been looking for to uograde from my OG O11 Dynamic

It would be nice to see the 207 be btf compatible

We're back to the 90s boys

Lian Li are releasing really cool and amazing things. 🥰👍

Damn Lian Li are doing some exciting stuff.

A case so fancy you will need to buy the LTT Top Hat

Any computex video with Alex gets an instant like from me

Whenever I want to buy a Lian Li product they are always out of stock and I end up getting a knock off alternative. The stuff looks decent but I can never be bothered to wait for re-stocks.

That first case looks amazing and I really want it as I love a wood esthetic. But I wish there was a version with a little more top room above the fans so you can hook in a 4K bluray disk drive 😅 not enough cases care to add space for it today. Like if I could get that, I’d definitely buy it and transfer my rig from the lan cool 2 to that. Then I’d be able to start ripping my movies to make a digital at home library and also finally be able to add my whole CD collection to Apple Music 😂

I love wood when it's nicely applied for a case, this doesn't seem to be such a case...

I remember way back when when Lian Li were ALWAYS super expensive... now they're reasonable as heck...

the first case needs an matx/itx size.

If I could get one of those with something other than the walnut, like brushed aluminium for instance, that would look great

That Lancool 217 looks really cool, especially for the price. I hope Gamers Nexus reviews it. That might be my next case if it's good...

I prefer imported italian maple in my desks but I suppose walnut is adequate

Those power supplies don’t seem like that great of an idea. The bit sticking out means it may be more difficult to use in some cases and that it may only work in one direction so you might not be able to orient your power supply optimally for the fan configuration. I just don’t really see the point, you aren’t moving the connectors all that much you are just flipping them 90 degrees, it won’t be any easier to route cables since they basically start in the same place and you have to fit the bit that sticks out anyway. It won’t be any easier to plug in cables after the power supply is in the case either since again the plug as basically in the same area just flipped 90 degrees, it might even be harder because you have less space than with a normal power supply. Something like the Corsair shift is more useful since it actually changes where the cable come out and does make it easier to plug in more cables with the power supply installed. However it does still have the issues of only being able to be inserted in one orientation in some cases and it does need more width to account for the cables coming out. So what is the point of this? Does it work well with a few Lian Li cases?

Whilst the pricing is good, the obscure 170mm fan sizing kinda throws me off. Its such a unique fan size that if the fans stop working or I don't like the noise profile or whatever the case may be, the only mainstream option will be Lian Li and because its a first party fan with a unique sizing they'll most likely price it quite high

What would that case cost without the walnut? 1:55

The Lancool 207 case is very nice. I would 3D print a fan shroud for even better cooling of the GPU.

I like the fan feature of the LC 217 but the case I really like is the LC 207 and the price is very attractive. I wonder if it fits the big GPUs of today?

Putting the fan filter on the back of the fan is like putting your air filter in your exhaust..... The fan gets coated in crap constantly and spinning it backwards doesn't remove the build up from the back of the blades because the air isn't being pushed backwards by the same surface. You'd think a company like lian li would have 1 person with some common sense in it.

Windowless version of this would be perfect

I made my GPU support out of a metal clothers hanger and a strong magnet ... works great

Classy 1994 Plymouth minivan look

why nobody is making fan spot on the back of vrm these days? I have one 80mm spot on my old thermaltake case from 2010 and that small 80x10 12v fan running from 5v is completely silent and drops at least 15 degrees from vrm

6:02 the Deepcool CH560 is getting some competition

119 is actually crazy cheap for that case. God damn

Dust filters on the back of the fans just makes cleaning them more annoying surely? Having to open the case to get to them.

I think I've seen Dan A3 mATX case in the back, wish you took a closer look at it. It's the case I'm really excited about.

It looks VERY COOL!

Nice case!

5:38 Even in a case video I CAN'T ESCAPE THE AI

that looks like a speaker from the 80s

Do you know how to not have dust on your fans? you put the filter in front of it

Well that 12V to 5V regulator is probably 25¢ so it’s not like it’s that hard to integrate for the RGB

LGR would love that walnut case

Ok, but why is it better to have the filters in the back of the fan?

Fan filters should always be placed in front of the fan in a pull configuration. (I did a bunch of testing too). The only reason Lian Li placed it behind the fan is so that their self cleaning feature can work better.

15 ,12 or similar size case fan in china are about 2$ each.

with the 011 vision compact and the aio pump going thru the back... can you do that with the currently 011 vision on the market?

can i go with Lanncool 217 and with Lian Li fans i have 7x off the lian li infinity fans in the Walnut case? wood love it

Dust Filters behind the Fans are somewhat a nightmare to service. I dont wanna open up my case every time i wanna clean my Dustfilters.

Looks like an 80s home theater speaker

There is a 0% chance that the wireless rgb transmitter thing will work basically ever. rgb already doesn’t work properly like 80% of the time.

how much would it cost to get the exact WLRS with all components included system as shown in video?

Side I/O - sod that. I'd keep accidentally kicking things plugged into then and damaging the ports.

let's go Lian Li. beautiful.

make the aio wireless and ill pay big bucks. HATE the spaghetti coming out of the AIO LCD.

Cool !

I'm going to stick with my Seasonic Q704. There is nothing better than a sexy black case.

A case without the Lian Li tax? Amazing. Up until now, Lian Li tried their hardest to be the Apple of PC cases (overpriced by 200%)

I like cheapest one with psu in front

this video was really quite good!

I want more cool SFF cases

Has Lian Li made so much money with O11 that now gives away cases??

I dont think i like the wireless fan controler. Yes its less messy visualy but there arnt infinite airwaves and id rather use those for stuff that actualy needs it and save on the interference.

Okay 120 is awesome. anything on the new desk there?

As it should be why pay a fortune for a case we still have to buy all other components

Stll missing a drive bay, and not cheaper than a Fractal Pop Air.

alex is such a good host now

Alex: “Since this is a case in 2024….” Me: “Don’t tell me the case comes with AI.”