The sequel better than the original | Ansuzalgiz Hummingbird Gen 2 SPOTLIGHT

Рет қаралды 18,978

Күн бұрын

You may remember my video on the original Ansuzalgiz (ᚨᛉ) Hummingbird. It was an early solenoid-powered flywheeler and made with standard grip and stock components to help with ergonomics. This blaster had its quirks and pitfalls. But, In a time before angled mags and before the Neutron Solenoid, the Hummingbird was still a blaster to be reckoned with.
The Hummingbird Gen 2 keeps all the good and sluffs off the bad, with some surprises in store too. with angled mag support, full-auto as an option, reduced form factor, and more, it's hard not to give a whole-hearted recommendation
Find Timmy's new site - Foam Propulsion Designs - with the link below!
foampropulsiondesigns.com/
Find the Neutron Solenoid on our shop here:
outofdarts.com/products/high-...
Want more foam-flinging content? Subscribe to our once-monthly Newsletter!
outofdarts.com/pages/e-mail-s...
Our video on the Ansuzalgiz Hummingbird (gen1):
• REVIEW: Hummingbird So...
Our video on the Kestrel micro-flywheeler secondary:
• REVIEW: Kestrel (3D-Pr...
FAQ & Corrections:
-If you have any questions about products we sell on the shop, don't hesitate to shoot us an email: orders@outofdarts.com
-
0:00 Opening & Montage
0:41 Introduction
1:06 Disclosure
1:21 OOD's tiny involvement
1:54 A comparison to early gen iPods
2:14 The Hummingbird gen2
3:19 Full-Auto Without a Board?
4:23 Hummingbird go brrrt
4:47 More About the Neutron Solenoid
5:12 Angled Accuracy Advantages
5:46 More Hummingbird gen2 Features
6:43 What would you rather see?
7:22 Magwell & Magazine Compatibility.
8:43 Aesthetics
9:02 Recommendation & Closing Remarks
10:04 Afterword About our Newsletter
10:44 Bloopers
Out of Darts, run by Luke, is a one-stop nerf-modding hobby shop. We carry all the supplies, tools, and accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 Prusa printers. Check out our site below for guides, build lists, and resources.
Please subscribe for more!
tinyurl.com/jnuot5d
My web store:
www.outofdarts.com
Product questions?
mailto:orders@outofdarts.com
Follow me on Instagram for sneak peeks:
/ outofdarts
Edited by J Perry Heun, Out of Darts Media Producer
-----
Track: Automatism - _91nova
Music provided by Epidemic Sounds
-----

Пікірлер: 65

@outofdarts Жыл бұрын

To get a Hummingbird Gen 2 of your own, Find Timmy's new site - Foam Propulsion Designs - with the link below! foampropulsiondesigns.com/

@benjaminsanford4500 Жыл бұрын

I love mine, I converted it to brushless with select fire and a screen. The neutron is an amazing piece of tech. The hummingbird is quickly becoming my favorite blaster. It is unbelievably compact and solid.

@outofdarts Жыл бұрын

Very cool!

@got1flipflop Жыл бұрын

is that maybe a follow up vid that could be posted? or is that an option that Out of Darts could sell?

@benjaminsanford4500 Жыл бұрын

@@got1flipflop not from me haha

@Thrillowatt 3 ай бұрын

Hey man, I'm looking to do the same any way you could give a parts list and a short tutorial?

@EnnesArms Жыл бұрын

The autosear is a super neat concept! Love how this blaster looks and performs! A worthy successor to the original hummingbird!

@jeffersonderrickson5371 Жыл бұрын

I want to see what the wiring diagram looks like.

@equizzix4804 Жыл бұрын

@@jeffersonderrickson5371 agreed. I've been trying to get a solenoid to work without one of the boards, and this is absolute GENIUS

@jeffersonderrickson5371 Жыл бұрын

@@equizzix4804 I have a feeling it's like a rapid strike two switch system.

@devackroyd Жыл бұрын

This form factor with select fire, even if it was just semi auto and full auto would be wild. I don't think my trigger finger could handle having access to that rate of fire at all times!

@SpyderGiant Жыл бұрын

I put a neutron in a gryphon and it’s pretty slick.

@seanshepard2401 Жыл бұрын

Great video thanks!

@got1flipflop Жыл бұрын

i bought one myself and it arrived a week ago. it’s beautiful! i’m trying to figure out if worker gen3 or bamboo darts work best. but man, what a work of art that kicks butt. so glad I got it. and as you said, I paired it with a Nightingale. awesome review

@michaelsolberg3330 3 ай бұрын

How long did it take to come in?

@got1flipflop 3 ай бұрын

@@michaelsolberg3330 took 2-3 weeks if i remember right. i’d also order an extra bag of pins/ fasteners (available on the website store) as sometimes those pins can wiggle loose

@DarthTater5738 Жыл бұрын

Looks awesome. Can we get a 3D printing type update and factory tour. Maybe get Joel in again.

@Snuffflux 11 ай бұрын

would love to see a mod to add support for nightingale mags, I currently have 4 that only see use in my nightingale. I love the size and feel of them compared to regular angled talons and if it can support both that would be even better

@theconqueringenigma Жыл бұрын

What's stopping anyone from just not attaching the buffer tube? I feel like it wouldn't be too terribly difficult to modify the cage for smaller flywheels to lower the profile and then you have a Kestrel update.

@kennethd2412 Жыл бұрын

4:30 do I see bambulab X1s?

@rensm7873 2 ай бұрын

I know zero about moddin blasters, but it occurs to me you could make the stock a magazine as well. Maybe a valve to select which direction the feed comes from?

@brettcormanns23 Жыл бұрын

Can y'all change the tachi mags slightly so that they can work with angled talon magwells? Thanks!

@CalebWarner-hz1or Жыл бұрын

the ipod thing made perfect sense and I'm 15 😂

@boko3155 Жыл бұрын

I spy a couple X1C.. would love to get your take on the machines!

@outofdarts Жыл бұрын

We're still putting them through their paces. Video should be published before the end of the year!

@HyperShadow89 Жыл бұрын

I wish there different cage gap sizes. I mainly play HvZ, so the FPS cap is typically 130

@6thsun25 Жыл бұрын

it would be nice if (as a second gen improvement) it had variable rate of fire and variable fps.I mean this is like gen 1, only smaller.

@wyattr7982 Жыл бұрын

My first iPod was a 1st gen nano with only 2gb. 7th grade me would have taken a bullet for that thing

@damonwalden5699 Жыл бұрын

I see this being amazing with hyper rounds 🤔

@robertguthrie4113 Жыл бұрын

So what causes my hummingbird 2.0 not shooting darts anymore I’ve checked and it’s not jammed

@millermdiehl Жыл бұрын

Luke, my plunger head on my proud papa broke and you don’t have a replacement part. what should I do? because I don’t wanna spend 20 or $28 to get a replacement. Though when it was working I loved it.

@outofdarts Жыл бұрын

Shoot us an email to orders@outofdarts.com!

@stevepasquarella823 Жыл бұрын

When will there be drum mags?

@hhnvuokjr634 Жыл бұрын

On which site are all the stl files

@alexanderw5974 Жыл бұрын

What is the colors you got sent

@juliannixon9734 Жыл бұрын

.... That means you could, in theory, make a mechanical Selector switch from Full to Semi-Automatic.

@juliannixon9734 Жыл бұрын

That, and the option of a folding Stock would be the 2 things I want.

@juliannixon9734 Жыл бұрын

So, the mechanical Selector would just disengage the switch that enables the solenoid to keep cycling.

@h0b0j04 Жыл бұрын

Printing that barrel at a 45* angle with no supports sucked. Even with painted on supports in prusaslicer on a mk3s+ I can't get it perfect. Other than that, printing was smooth. No reviews have shown how the rail and buttstock slide on. I thought that was the most impressive design aspect. Timmy must be an engineer. I still need to assemble it though.

@tjcallahan8901 Жыл бұрын

What infill are you using?

@bharathvinod6628 Жыл бұрын

It would be a beast with a half dart drum mag

@noahscool9 Жыл бұрын

This might sound stupid but what is the nerf 50 round drum mag was cut in half for half length darts

@bharathvinod6628 Жыл бұрын

@@noahscool9 well we could mod it

@shatteredskies191 Жыл бұрын

Doesn't the Momentum use straight talons at an angle? How come that isn't a problem for that blaster? Also, because of the way the full auto works in this blaster, it is insanely easy to wire in a select fire switch.

@outofdarts Жыл бұрын

Momentum uses straight talons, but they feed straight into the flywheels. There is no dart realignment in the Momentum.

@shatteredskies191 Жыл бұрын

@@outofdarts Oh another question. Does the momentum have a power switch, or do the escs boot up as soon as you plug in the battery?

@DoubleL11862 Жыл бұрын

Is there a way to modify it to fire semi-auto or make it select fire?

@benjaminsanford4500 Жыл бұрын

Yes you can add an on off on switch, one side by passes the auto seer setup and and the other enables it.

@jeffersonderrickson5371 Жыл бұрын

You can direct wire the solenoid to the flywheel circuit and go dakka all day. My gryphon is semi auto solenoid and It feels like an arcade cabinet game like Terminator 2.

@aarononufreychuk8228 10 ай бұрын

How much does it cost?

@jimmystancliff2843 Жыл бұрын

When's the release date

@Plutonium1945 Жыл бұрын

How does it feed the darts to the flywheel

@slantedhorses4233 Жыл бұрын

pushed by the solenoid

@jimmystancliff2843 Жыл бұрын

If someone could help me where can I buy their pew pew it seems I'm having a hard time finding this gun how can I get it

@outofdarts Жыл бұрын

The best place to check is PewTech's Instagram page. Turn on post notifications so you know when he's got one to sell!

@ForRealConfused Жыл бұрын

Wow

@rokushou Жыл бұрын

Is the Neutron solenoid a reference to Luke's Jimmy Neutron hair?

@DJotterpop Жыл бұрын

Does this have a rival round variant?

@genedocsinnovations8319 Жыл бұрын

OOD Jupiter with a proton pack ☺️

@RowindeVries Жыл бұрын

i should be getting my harrier in next week :D

@MyKindhearted Жыл бұрын

❤

@kyleodonnell2111 Жыл бұрын

Please review the rival forerunner!

@outofdarts Жыл бұрын

We just bought one, and are ready to test it at one of the next games! No guarantees if or when we will do a video, but nevertheless we're excited to check it out.