The Spindle Gouge - What Wikipedia Can Not Tell You!

Рет қаралды 8,504

Күн бұрын

In, The Spindle Gouge - What Wikipedia Can Not Tell You!, I explain what you need to know about spindle gouges including differences between a bowl gouge and a spindle gougle, differences in spindle gouges and how to sharpen.
If you find my videos helpful, you can buy me a virtual cup of coffee with this link. www.buymeacoffee.com/mikepeace3Y
00:00 Introduction
00:35 What is a spindle gouge for?
01:42 Spindle gouge vs BG profile
04:20 Detail gouge
07:20 handle considerations
07:54 buying quality
10:10 Continental gouge
11:52 Sharpening a spindle gouge
Richard Raffan demonstrate free hand sharpening a spindle gouge. • Richard Raffan shapes ...
As an Amazon Associate I earn from qualifying purchases from my Amazon shop www.amazon.com/shop/mikepeace...
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website www.mikepeacewoodturning.com/

Пікірлер: 39

@trevorlittle3244 19 күн бұрын

Thanks

@LewisKauffman 2 жыл бұрын

Thanks for these detailed explanations, Mike.

@MikePeaceWoodturning 2 жыл бұрын

You are welcome, Lewis!

@georged1209 2 жыл бұрын

Good refresher Mike, you always hit the key points we need to remember.

@MikePeaceWoodturning 2 жыл бұрын

I try. Thanks.

@davidmorgan7522 2 жыл бұрын

A boat load of great information Mike! Thanks for sharing. Take care, Dave

@MikePeaceWoodturning 2 жыл бұрын

Glad you enjoyed it

@MarklTucson 2 жыл бұрын

Good refresher. Thanks, very helpful

@MikePeaceWoodturning 2 жыл бұрын

Glad you enjoyed it, Mark!

@jimbalz3017 2 жыл бұрын

Great stuff. Terminology and "sub-skills" like sharpening are key to getting better for rookies like me. I really appreciate these kinds of videos. As I type this, I realize that I really appreciate all your videos. Thanks so much.

@MikePeaceWoodturning 2 жыл бұрын

Glad to help, Jim!

@jackthompson5092 2 жыл бұрын

Great lessons Mike.

@MikePeaceWoodturning 2 жыл бұрын

Thanks!

@radiationroom 2 жыл бұрын

Thank You!!!

@MikePeaceWoodturning 2 жыл бұрын

Welcome!

@lyndalanthony635 2 жыл бұрын

Good video. Great presentation.

@MikePeaceWoodturning 2 жыл бұрын

Thank you kindly!

@OregonOldTimerWOODTURNING 2 жыл бұрын

My rule is, when any thought of sharpening enters my head, it's time to sharpen.

@MikePeaceWoodturning 2 жыл бұрын

Indeed.

@grumpywiseguy5992 Жыл бұрын

I have made 13 tool handles out of PVC and 1 inch wooden dowel. They fit my hands perfectly, I can make them any weight and length and they cost about 2 dollars to make, ok maybe 3 with the epoxy. You started me down this path a couple of years ago. Thanks very much, I have saved a LOT of money which I have re-invested in more tools of course!!

@MikePeaceWoodturning Жыл бұрын

Sounds great!

@MrAtfenn 2 жыл бұрын

mike, as always, love your videos. could you give the name of that flexible angle finder you demonstrated at the grinder. also i really love the pvc trick. getting too many lines marked on my vari grind

@MikePeaceWoodturning 2 жыл бұрын

Are you talking bout this? www.ptreeusa.com/turn_accessories_angle_checkers.html

@lawrencemerkel632 Жыл бұрын

I am always confused about on the Oneway jig at what position does one set the angle. It has notches from the bottom to the top so from the bottom are you up 2 notches as shown in your video. Please advise because I ground a spindle gouge too shallow. I get mixed info from videos about the distance from the Oneway gauge to the tip of the gouge. I really over ground my old spindle gouge. Thanks for the great video. I enjoyed your presentation

@MikePeaceWoodturning Жыл бұрын

Good question! I answer this in a video I provided a link to in the video but the links do not show up when watching on some devices, I provide an explanation here kzfaq.info/get/bejne/kMpjjLR3xM6Womw.html

@glencrandall7051 2 жыл бұрын

Very good demo Mike. Excellent sharpening tips. Especially good point about using a mask while sharpening.👍👍 Thank you for sharing. Have a great day and stay safe. 🙂 PS Be looking for you at AAW.

@MikePeaceWoodturning 2 жыл бұрын

Look forward to meeting you, Glen.

@bradbyers7505 2 жыл бұрын

Sharpening is as big a challenge as turning in my case. One tip I might share with those who use a sharpening system like Wolverine or Kodiak - try sharpening gouges with the handles removed. I have a few tools with very long (for me) handles. I bought a couple of metal, hollow handles that use grub screws to hold the bit in place. If I take the handle off to sharpen the edge I don't have a "cow's tail" in my way. Another thing I learned is that jigs that index the tool at the end of the handle depend on the handle and bit being perfectly aligned. I sighted down a few of my wood handled tools and found that many are misaligned. Hope that helps somebody.

@MikePeaceWoodturning 2 жыл бұрын

Thanks for sharing, Brad.

@victoryak86 Жыл бұрын

Hey Mike. I’ve got an older grinder inherited from my father which is a Grizzley with a larger slow turning wet wheel with a reservoir for water. Also it has a 5” high speed wheel. Do you think it’s worth trying to make this work or get diamond two wheel grinder? I’m thinking the water wheel might be too slow for HSS or harder? The 5” wheel may not be big enough esp for a jig but might be able to make it work.

@MikePeaceWoodturning Жыл бұрын

Hard to say. If it has turning tool sharpening jigs I would say give it a try. Lots of folks love a Tormek. And many dislike the messy water bath and buy a 10" CBN wheel. Otherwise check out WoodturnersWonders.com for their sharpening system/accessories.

@MarklTucson 2 жыл бұрын

Oh, one other reason not to hold the jig on the bottom: if the tool slips off the wheel (not that such a thing would ever happen 😬) the wheel can grab and slam the tool down. You don’t want your hand in the way if that happens.

@MikePeaceWoodturning 2 жыл бұрын

I agree. I saw one noted woodturner suggesting holding from the bottom but I just could not see that being a good way.

@Ron_Radliff 2 жыл бұрын

Good info as always. I see you're wearing what appears to be a fitbit (or similar) on your wrist. You have to be careful with those things. I wore one once and the damned thing called the coroner and reported me dead.

@MikePeaceWoodturning 2 жыл бұрын

How handy is that? Glad it was not accurate, Ron.

@Ron_Radliff 2 жыл бұрын

@@MikePeaceWoodturning Me too. My understanding is that most people don't recover from autopsies. LOL