KZfaq should hire this dude to edit everyone else’s how to video. He is quick to the point and dosent repeat the same thing over and over and he still gives you all the info. Thank you

IV been installing all my own radios for the last 18 years this is by far the best break down vid ever much respect brother keep up the good work 💯

Best tutorial install ever but this video also made me just want to keep my stock radio....

learned something new, didnt know you can reassign the buttons on the steering wheel to answer/end call. have the same setup so gonna get into this today. great video as always

Excellent video Gentlemen - in the process of replacing my 06's radio - short and to the point without any fluff - it is greatly appreciated.

Awesome video...No bull crap Bla bla bla...straight to the point and yet detailed at the same time! Thanks, Helped me figure it out. I wish everyone made videos like this.

Just wanted to say thank you for this video. I've never commented on a video, but this is probably the most helpful video I've run across on KZfaq. I have a 2006 Silverado 1500 paired with a Kenwood double din radio and backup cam. The instructions that came with the kenwood were not very helpful. I watched this video 5+ times to figure out what I needed to do and saved money from having professional install. Everything has been installed for 3 months and no issues. Thanks again for all your help! I know this video has not only helped me, but tons of others as well. Thanks again!

Literally had that ringtone for years now... great video guys very informative and easy to follow.

Excellent video. I really appreciate that you took the time to put this together. Thanks!

Best wiring install video, ever! Great job!

Your quality of work is amazing!

Great video! Thinking about doing this in my 04 z71, this could come in handy. Just not sure about what way to go with stereo on a truck thats not my daily driver anymore. Like you might guess the factory speakers have seen better days.

You guys are awesome.. been following you two for years

Thx for this video and the other one about PAC RP5-GM31! Your giving me hope i can succesfully remove the standard radio ( Cadillac escalade esv 2007 ) and keep the origonal buttons and so on! Just need to figure out a good headunit! Good luck with the channel!

This is exactly what I needed. Thank you very much!

Good job guy's I'll be up there in December for my install, looking forward to it.

Where the hell are they located. Finally somebody that knows their stuff! I need a radio installed in an 05 Tahoe!

Very Very Very helpfull.....thank you for breaking down every detail. like it should be!!!🖒🖒🖒

Great Video, Thank you for taking the time to share your knowledge.

Awesome job here. Thank you so much. This is going to be so helpful

Ha! This is the video I've been waiting to see. I have a 2005 Chevy Suburban. Now I can comfortably make sense of what harnesses I need. The PAC Audio website lists dozens of harnesses and adapters for this vehicle. This makes it very difficult to determine which harness/adapter to use. Now I'll be able to listen to great audio when I'm out looking at rocks! Great video. Keep up the good work!

Great video man. Appreciate it gonna save me money on my install for sure.

Thanks for the video, installed a Sony with CarPlay into an 05 Silverado with Bose. Video was a big help

This is going to help me so much on my install tonight in my 05 silverado

Wow im impressed with the great video, Thanks for sharing

Thank you for the in depth info on these

Outstanding guys. Perfectly timing I’m sure Paul had something to do with this one haha

nice professional tutorial install

Hello guys thanks for your great videos. Question what do I do if I’m adding an amplifier lm using this rp4-gm -11 on my 2003 Cadillac Escalade I’m changing stereo too?

I believe I have the rp5-gm11 and was wondering if I could bypass the plugs for speakers being im installing new speakers along with an amp? The truck has the bose stereo setup and onstar.

Ahahahah the creepy little yes from the girl that obviously owns the truck at 16:22 ahahahah that's soo cool. I remember as a kid watching my dad teach me how to install subs in my old 1995 Z71 and me saying yes in the same way...ahahahha 😁

When I think I'm ready to buy a new stereo for my truck, I watch this video and it completely eliminates my desire. I suppose I can wear headphones.

Holy WOW !!!!! Best video Award!!!! Thanks Guys. All the info I need.

Gotta love the Crank ring tone.

Great video men!! I have the same truck that you guys just installed the pioneer in. Mine has the bose system with the stock DVD player on the top. Can the be intergraded into the new system??

Ci did everything you did in this video and everything works but if the radio is not at 25 or louder the radio starts flashing amp error and the radio goes black I have a 04 Chevy Tahoe z71 I installed a pioneer AVH X390BS

For future use I would really suggest maybe you list the actual parts used with a valid link in the description section because no point of going through all that detailed information talk if there is no link or text to Google

Welp, just when I thought I could do it by myself😣😂

Does using the RP4 allow you to retain fader controls in the new tuner vs the RP5? I have the factory Bose system in my 2005 Suburban.

Good video. I own a 2004 sierra 1500 crew cab with a rear seat audio control. After installing a kenwood dmx906s and axxess axdis-cl2 noticed that there is no rear audio and the unit doesn't turn on and the rear speakers run through that unit. Wondering I missed something? Everything else works fine and tried replacing the control module even and the other ones do the exact same thing

Thanks! I'm about to do a full stereo replacement in the next week.

Great Job as usual! Here's a question. I have the Bose setup already, and honestly it sounds pretty decent to me the way it is. But I would like to improve the whole system using the least invasive process as possible. What are you're thoughts? I would like to just throw in a regular single din head unit. So I imagine I have to follow the same process with the RP4 right? After that is done, can I replace all the factory Bose speakers to similar after markets and get some improvement? Or do you think that could mess something up? Not sure if the Bose speaker setup works with various impedances/loads, etc. on the factory amp? Let me know what you think. thx.

Awesome video, will this be a base to use on a 2005 Trailblazer with Bose system (no subwoofer) without steering controls. I want to start an upgrade to a Kenwood DVD, back up camera and not use the bose amp (changing to a better amp)?

Great Video! I have used this vid for hooking up my new AVH1500NEX radio in my 2004 Silverado. I also put the RP4-GM11 for the steering wheel controls. Should I use the Bose amp? Would it sound better if I used the power out of the radio itself? I replaced the front stock speakers with some JBL Club 6500C speakers. Do I need to use the crossover that came with the new speakers or will the crossover in the new radio work? Thanks! Bryan

that steering wheel cover hurts to look at lol

Question: I ordered the same RP5-GM11 Class 2 data-bus with 24pin and 12pin harness. I have Bose system and want to keep my steering wheel controls but the only problem I have is that I don’t have the front and rear RCA cables like you have. Looks like I only have a red and white male connectors. I noticed you have 4. I don’t know if they have different versions and do I need them.

You guys make some of the best videos. Do you connect the RCA's from the PAC module to the aftermarket radio or just use the wires for the factory speakers? It is a Bose system.

Helped me out alot!! THANKS!!!

Great videos, I've watched several! I've got a 04 Tahoe 6 disc Bose, with rear DVD player and wireless headphones. Will the RP5 kit work to keep these features?

Excellent... As Always!

Hope you can help. I have a 01 chevy tahoe. The factory amp is behind the glove box. I installed a aftermarket stereo a few years ago and worked fine. My factory amp does not work anymore. I do have the accessory wire from the stereo wired in to the factory harness. Pink wire on the plug that is not used anymore. My question is. If I bypass the amp as show in the video you did on the red avalanche. Will the factory subwoofer still work? Or is there another bypass that needs to be done? I do have the bypass kit like in your video

Supper good like your videos , i try to connect one an don’t have any speakers sounds on a 2003escalaled what can i do to fix the problem thanks

Not sure if this is monitored still but just purchased a 2004 yukon denali with typical pain in arse things to install a aftermarket head unit steering wheel controls, rear DVD and radio, Bose, on star. I already have a jvc double din from previous truck that got totaled. It has bluetooth etc. Question is the RP5 GM11 the best one for the job? And by having steering wheel controls and a mic for hands free, do you just use a y spliter? Not really concerned with on star but my truck has a mic in headliner for onstar

Guys great video! I really appreciate you sharing your knowledge! I'm working on a 2005 Chevy avalanche with an rp5-gm11. I was meticulous when I was connecting the wiring but when I plug in the harness the car will not start? I don't know if I have a defective rp5-gm11, or if there's a problem with the Ken bus, or if the antitheft is engaging? I just wanted to ask you if you ever ran across this problem or if you can offer me any suggestions? Thank you again and keep up the great work guys!

He knows his stuff

I used a os2x and a swi-rc should I have used something different seemed like the best fit since I have a Yukon with Bose and rear entertainment and I wanted everything to work as if the factory radio had never been touched

I'm using this exact setup, 06 GMC sierra w/bose, pioneer AVH-W4500NEX, and RP-4. The micro bypass specifically states to only connect it to the radio only, am I supposed to connect it to the rp-4 harness as well? Also does the pioneer ignition (red) get powered off the RP-4 relay (red)? There's no standard red ignition wire included on the RP-4 harness.Also is there a reason you didn't use the speed signal? Thanks for the help! Your videos are awesome 👍

Appreciate the tutorial!

Did you hook up all three of the green wires together for the bypass you the green on the bypass the green on the radio and the green on the pac harness just curious

All depends on the stereo you buy I never had a problem replacing a double din with a double din in my 06 Silverado 1500

So I'm confused. I installed a Pioneer unit and an RP5 module in my 2006 Silverado (non Bose, with OnStar, with steering wheel controls). Everything works perfect. But I never connected a remote turn on wire to the module...only used the remote turn on from the Pioneer harness to go an amplifier. If I recall, I capped the blue/white wire off on the rp5 harness. Where would the remote turn on wire go into the module? Or is the rp4 different with this?

I have the RP 5GM 11. I am installing an aftermarket, subwoofer and amp but I’m still using the door speakers and tweeters at the moment until I decide what speakers I will install there. Do I need to bypass the amplifier since I’m using aftermarker for subwoofer? I was going to just retain amplifier with the sub said it would powered the door still head out a little bit of extra power until I get upgrade but then I started taking will it interfere with the subwoofer and the mono amp. I also saw that there is an RCA input, which I do not think I actually have anyway, but for the Bose system to be plugged into the back of the head unit which my mono amp needs. to cause any electrical issues. They don’t see any instructions on that particular scenario.

Quick question, hope you guys can help. I have a 2004 Chevy 2500hd. Had the PAC-2bose module and it went out after I spliced in a remote wire for aftermarket amp. So I purchased a bee module. The RP5-GM11. How do I wire in the remote wire for the amp or should I wire it to a separate ignition on power source? Thank you

back in the day those ground loop isolators used to nuke the lower frequencies. i stopped using them a LONG time ago due to this. have they improved in design so as to not sacrifice frequency response now?

I purchased a pioneer stereo similar to that one, and also got the modules to retain steering wheel controls and on star and all that good stuff, but they had trouble installing or setting up the modules, with the volume button on the steering wheel it changes songs, and with the seek button it'll change the source, what could it be?

I noticed you didn't have to wire a red accessory switch wire. Will this same install work on a 2003 Avalanche?

What harness do I need if I’m i stalling aftermarket radio in my 06 sierra with Bose and onstar but I don’t need the onstar just the Bose can I get by with a regular harness?

Is there a way to use the GM/Onstar microphone that's already installed with these stereos?

@ 15:09 you talk about how you installed the "RCA & Aux jack" into the cubby. Did you mean USB & AUX jacks?

How do you cut out the plastic basket behind the radio for a double din radio install on an '04 Silverado?

Wait. So the steering wheel controls are part of the 24-pin adapter? Which pin/wire is the swc? I feel like this could work with a separate 3.5mm male input into a stereo that had the custom button input

You folks are great. I have a 2005 chevy 2500 HD lt. Looks exactly the same. I installed a cheap unit....Boss...please no rude comments, lol. I cannot get it to turn off once I leave the truck unless I do it manually...and now the truck dash where speedo is, the lights stay on. Any ideas on trouble shooting for me. cheers.

I have a 2003 Silverado 2500hd. I have the Am/FM CD Tape player. I do have steering wheel controls However, I only have ONE wiring harness (although there's a place for TWO on the back of the OEM radio) and the micro antenna wire. Every video I've seen has at least one other wiring harness. Am I missing something here?! I'm wanting to install a JVC (KD-X370BTS) single DIN stereo with Bluetooth and Spotify capabilities. Do I need the interface? And if so, how do I hook it up with only ONE wiring harness? Thanks, your video was VERY informative!

Is it possible to use the factory xm radio tuner or do you have to install a new one?

So u only have to hook up the one big plug coming from the truck what is the smaller plug for

Hi guys. I installed a kenwood double din in my 03 suburban and I'm getting a constant hiss even when volume is up or all the way down. Any suggestions

Hey there, i bought the same wiring harness and got my jvc deck to turn on but i have no sound going to the speakers. (Have the bose speakers) I dont have the sound filter in it so is that whats causing it? I havent touched the speaker wires for the jvc harness either so do i need to connect those to something? Any help would be apresiated 👍

What's the difference between the pac harness you guys used over the axcess gmos-04 ? Pros?cons?

You guys are the best! What do you do for a 16 Ford Focus 6 speakers without Sony system. Also with Sync 3. Thanks!!!

Just did my05 Monte Carlo. What a joke, and that PAC RP5 interface made all my speakers less than half volume and all distorted and crackling. I bypassed one speaker from the interface and that one sounded great, so I sent the interface back and got a basic harness and a steering wheel control harness and made it work. No chimes, factory amp, but it sounds great. Idk why everyone says you need an interface to bypass the amp. I just left it hooked up and every speaker works fine. Amp not working but leaving it plugged in makes the speaker connection. New stereo pushes more watts so the amp isn’t a big deal

Last time I didn’t use wire nuts I messed up my wiring and it made it harder to fix lol

my 2003 envoy has onstar that I don't use. can I bypass it using this wire harness kit and still have all function minus onstar

Where do you pull power from for the Yellow and Red wires ?

I was told that I needed the os2x module for my 06 Tahoe with on star and bosse system. I install everything the way it was labeled. So I cut the car on and the radio comes for about ten second and cuts off. It does this about 5 times and then it works normal from that point on until I cut the car off. And at that time it repeats the same process. Just want to see if you have ran into this problem

Awesome video

do you have any install videos with the new OS-2X. i did a install couple weeks ago with no issues on a silverado 2007 classic kenwood stereo and today doing a install on 05 silverado same stereo radio comes on and functios but ,3 seconds later lost sound. played with the wire harness thought that was issue cause sound came back again and then shut off. Pulled connectors yellow wire, red wire, blue antenna /amp wires and ground wires and soldered all them. same issue first turned on and now no sound again. thinking os-2x is bad?

The steering wheel controls would stop working from time to time on my 05 silverado, now they don't work at all, they don't even have a light anymore, how can I fix this? And also, I told the guy who did the install that I had watched this video and it shows how you can program it to answer call, but they told it can not do that, does it depend on the module used or any module can be program to answer and hang phone calls?

Can I use the same modules and harness for a 2005 Yukon Denali?

Does the rp4-gm11 retain factory chimes/sounds also?

I have a question, I have my 03 Silverado, and I bought a real nice boss audio double din radio, I don’t have the Bose system so I just went with the harness adapter, all the wiring is done correctly, but the radio will not turn on, to make sure I did it right, I hooked the accessory wire to the constant and it powered up and played music just fine, but when it’s wired correctly it won’t come on, I’d hate to have to rip out the radio every time I need to shut it off, any pointers?

I have an 03 Tahoe with Bose system but I only have one big big plug the harness has a smaller one what do I do with it?

What is the difference between rp5 gm11 and rp4 gm11 I have an 04 Silverado HD with onstar which I dont use and Bose which I want . I bought the rp5 ? Great channel

What is the small black harness you tucked aeay and didn't use?

If I have a single din stereo would I need to buy another harness for the double din

Great info guys! Thanks!

Hello I have this truck with just the same steering wheel controls but no Bose which PAC adapter do I need abs how do I wire it

Hello again guys so I replaced all the speakers still no sound but the sub so I removed the Bose amp opened it up and noticed some of the electronics were fried got another bose amp of proper part number now I have sound but only the frt right door and factory tweeters I made sure the rca hook ups were wright I used the pac rp4 not sure what I can try next

En k lugar se encuentran para ver si me pueden instalar un sonido en mi carro yo estoy en las vegas pero no se ustedes en k lugar esten... Y muy bueno su vídeo se ve k son muy profesionales en su trabajo Saludos des de las vegas

Hey I installed a pioneer avh-2330 in my 03 Silverado and it turns on and plays music but it’s distorted and quiet even on full volume. I’ve checked and rechecked every connection and I’m lost. Any ideas?

great video