This is coming from someone who doesn't own one, hmm hardly a recommendation is it. Perhaps when you get around to buying one your opinion may be worth something.

​@PC ULTRA If you had read the discription you would have recognized that the poor quality was a result of bad silver filament. Not of speed or printer fault. 😉

@PC ULTRA It was not only wet - the diameter was heavy floating, too. An old spool E*****e. Btw. Outer wall was at 100 this print. And as you can see - the other filaments did well - here and at the other timelapses I posted.

​@PC ULTRA What you see at Stormtroopers is the polygonic surface. Rings at tree support are absolutely normal. Both Troopers and earth turned out well. Maybe the lightning from top makes all looking a bit more worse than it looks finally under normal conditions. I think I have to spend a little time to learn video cutting and present the results in normal light after the timelapse. 😁 But not to use the Atlantis filament shop is just nice, a thumb up for this. 😂 But you are right and that is what I said first... I have so much old filament and this must be used first. 😉

@PC ULTRA just got my x1c yesterday and printed a near perfect benchy in less than 20 minutes. No banding, no manual calibration no nothing. Set it up, started it up, waited for the update to finish, printed the benchy. That's gonna say something. 3d printing for close to 8 years now and never had an easier print than this. And the out of the box quality is outstanding already. No comparison to my former printers where the x1 base quality was the maximum achievable. With a bit of tweeking I see the x1 easily ahead of the competition. The x1 is not perfect sure. But support is supposed to be good, replacement parts are cheap and good quality and there isn't even lock-in with all the 3rd party replacement clones available by now. Don't hate on something you do not own yourself just by one example and probably hearsay by the haters. At least check out other print videos.

Mine too the first attempt - because the filament was wetter than the next one. Try to dry it. ;)

Need a VzBot - it'd be like 3 or 4 hours. 😂

@@daliasprints9798 That's true😄.....but i doubt he would look as pretty

Just sliced for my P1S, including color changes it would need about 21 hrs. One color would need 13.5 hrs. I can probably tweak that colored one more. cleaning tower needs an hour already

Me too. ;) Time will tell. ;) V400 is also a nice printer - but no multicolor. The nice AMS from Bambu is just a great argument to buy. It has done a rumble in 3D printing - Creatity and Quidi for example going forward now. I'm very exited what will come in the near future. :)

As I described - It's not a printer issue - that was the old wet and weak silver silk filament i stored from 2017. The prime tower was straight - without silver - that was weak. Look at the copper text, black socket, white teeth and red eyes - all straight. ;)

You obviously don’t know anything about 3d po

@@spiritschamber Oh man I totally missed that in the description, sorry. Now that you mentioned it yeah all the other colors I see no banding. Awesome, really thinking about picking one of these printers up, seems like the future of FDM.

@@retiredfromyoutubehehe I would not bother with the AMS unit, it is a waste of money and time.

@@Aldoor the ams is amazing, swapping filament is so easy, loading is easy, no manual feeding and priming the head

About 19 hours.

That's because the printer has an automatic material system (AMS).

Hey! Sorry I don't know. It's a while ago I used Octoprint. I'm absolutely not up to date with it. The Bambu Lab printer I use now has the camera and timelapse feature stock build in. ;) I think there are many ways you can manipulate and fine tune the Octolapse timelapses, but I'm not the serious man who can help you, sorry. ;)

The Filament.

@@spiritschamber We must be looking at 2 different things, banding can't be caused by filament unless there's major differences in temp. I'm talking about the big lines that are horizontal

@@Kungpaoshizzi I know - filament weak and changing in diameter as I described in many answears as in the description of the video. ;)

@@spiritschamber Ahhh, that'll do it

About 19 hours.

@@spiritschamber that’s like 3 weeks in ender 3 time

@@shrimpinpat If it was able to do multi-color prints. :D

Lag am schlechten Silber-Filament in diesem Fall. ;)

Dude - 1st thank you for the comment! But second: Please read at least the description of the video... The printer is doing fine, also in quality. The filament in this print was old and weak (wet and changing in diameter) as described. ;)

@@spiritschamber my bad man was on a speed trip through bambu lab searches, should have said its still very impressive I watched some of uncle jessy's videos aswell with layer issues on helmets and stuff, there's still a lot to be said for fdm printing, gotta love it. Still plan on getting more myself even after recently moving onto resin aswell. The channel is good👍

@@Merc-ws9zh I hope you'r man isn't so bad. ;) Try this printer - I's really awesome. I say this as I'm 3D printing since 2016 - no one gave me a just a penny for this. ;)

Filament as described. See V 2.0! ;)

See description of the video? ;)

@@spiritschamber nobody reads description

@@mokolocomadafaka :D

Плохая нить!

@@spiritschamber проверяется легко (качество пластика) - цилиндр в одну стенку. Но уверен, что дело не в этом

@@user-rq7nx9tq8z Это определенно нить, принтер действительно отличный. ;) Кстати, я не говорю по-русски и делал это с переводчиком. Английский с тобой невозможен?

@@spiritschamber переводчик объединяет)) К сожалению, не говорю по английски. Буду проще строить предложения. Поставь для себя опыт, два цилиндра (можно и кубик, не важно) с одной стенкой, но разными пластиками. После посмотри под проявочным светом (светить на модель сверху). Если проблема в пластике, то это будет сильно заметно. Почему я считаю, что это не пластик? Обрати внимание, полосы выражены в местах изменения потока или при переходе (пример: переход поддержка - стенка).

@@user-rq7nx9tq8z Все в порядке. Я занимаюсь 3D-печатью с 2016 года и, конечно, знаю хитрости. ;) На самом деле это была нить - она ​​имела очень сильные колебания в диаметре и не была действительно сухой. После этого у меня никогда не было проблем с другими филаментами. Я сначала испугался из-за полос и подумал, что в принтере ошибка. Нет, это был просто материал.

Right. :)

Agreed

See video discription and the video "Terminator 2.0". ;)

See video discription and the video "Terminator 2.0". ;)

@@spiritschamber Ok

Moron

See video discription and the video "Terminator 2.0". ;)

That's right!

Sure all good but the filament. See Terminator 2.0 ;)

I have 2 AMS and no problems when filament is not old and broken and I print 99+% with generic filament ;).

@@spiritschamber Good for you, wish I could say the same. It is all ok when printing with Bambu's filament however as soon as I use another brand it turns into a nightmare. I can not believe that Bambu are naive enough to believe we will just buy their filament. The printer itself is good the AMS is a piece of worthless crap that I am probably going to make a youtube clip of it flying off a very tall building and smashing to pieces on the ground. I have spent countless hours dealing with over heating and pullback issues that should have been sorted before going to market. From what I have read you are lucky and definitely a minority. Mind you it might be you spend to much time drinking those spirits. Or is it that you are being paid by them in one way or another?

@@Aldoor Sure, Bambu is glad to support a fun-channel with 7 subscribers (ironic off). XD I'm sorry that you had such problems with the AMS, but I think there must be a reason for your issues. The only time I had a problem was with a litte too wide generic spool that I respooled then to a Bambu spool and everything was fine. I print 3D since 2016. Started with an A8, turned this to an AM8 with linear rails, have a CR10-S pro and tons of filament collected over the years - Sunlu, Giantarm, eSun, Eryone, Tinmorry, Extrudr, Nonames etc. and these I'm printing with absolutely no issues now on the Bambu.

@@spiritschamber Yes there is a reason for my problems. It is a poor design being released on the market . Plain and simple. You are obviusly either lucky or Bambu have made sure you got a good one to keep schills on side. The design should cope with any spool.

@@Aldoor aint got no problems my self.