The TTRS Clutch Conversion... For your TFSI

Рет қаралды 9,339

Жыл бұрын

Im well over my clutch problems now ive got the TTRS clutch conversion in there....
Do it Do it Do it!!!!
decimaltenths.co.uk/product/2...
T-Shirts and Hoodies!
decimaltenths.co.uk/dtmerch/
Check out our NEW Website:
decimaltenths.co.uk/
------------------------------------------------------------------
Follow us on Social Media:
Facebook : / decimal-tenths-3627335...
Instagram: / decimaltenths
------------------------------------------------------------------
The camera I use in the garage:
amzn.to/2Up9Vmf
The camera I use outside of the garage:
amzn.to/2UoD1SF
A selection of the tools I use:
1/2" Torque Wrench: amzn.to/2vXQwPZ
1/4" Torque Wrench: amzn.to/39xOd3X
Feeler Gauges: amzn.to/2wKACZy
Dial Test Indicator: amzn.to/2xCpM7R
The Scales you should get... :amzn.to/3aqSgjv

Пікірлер: 127

@AUDIDOIT Ай бұрын

Awesome vid Nick… I have an ED30 garage toy and you convinced me to go TTRS clutch kit. Love your down to earth honesty. So refreshing 👍

@DecimalTenths Ай бұрын

Cheers pal, just gota say it how it is...👍

@hipeoplesSr Жыл бұрын

Can’t wait to see the full send

@iceman4659 Жыл бұрын

Great videos mate! Just found your channel tonight. Watching them all from across the pond in Florida. Just picked up a Mk5 GTI before the new year. Nice to see your content in amazing yet humorous detail! It helps alot to understand the process and learn new VAG tips to do the things I'm going to have to do when upgrading the unknown internal conditions of her. Cheers mate🤙

@DecimalTenths Жыл бұрын

Cheers pal, good to have you on board. Thanks for the comment 👍👍

@tcjnr82 Жыл бұрын

The way you explain the details of the job and the reasons for the steps you take on an install makes the video's so much better than other channels. #StrokaMota

@DecimalTenths Жыл бұрын

Cheers pal appreciate it. I'm just glad people understand what I say 🤣

@rickydub6950 Жыл бұрын

Nice job and solid advice on any clutch change.... change as much as you can while its all off 😁👍

@DecimalTenths Жыл бұрын

You don't wana have to go back in there...🙈👌

@Miaxkash Жыл бұрын

Great video as always Nick, this is way beyond my DIY skills but am glad to learn the process. Maybe in future I will get this job done in my MK5

@DecimalTenths Жыл бұрын

Cheers man 👍👍

@davidcardwell9277 Жыл бұрын

Another smashing video mate

@DecimalTenths Жыл бұрын

Cheers dude 👍

@davidcardwell9277 Жыл бұрын

@@DecimalTenths look forward to mapping side of it, I run the Helix organic clutch kit and Aks braided line, is stiffer than oem 100% but when you wanna kick it's head in you know it holds up 😂

@half_r_mk5 Жыл бұрын

The SouthBend Stage 3 Daily is also a good clutch SMF, that's what I use on my Stage 3 MK5 GTI. And it's good for 485 ft/lbs of torque. Pedal feel is OEM, actually slightly harder than OEM by 5%.

@antonio67390 4 ай бұрын

Merci pour ces explications très précises

@StevenGodfrey3956 Жыл бұрын

Sorry for stealing your clutch Nick ........ but I don't feel guilty !! 😉😁 My car is absolutely flying and clutch is sooooooooooo light and smooth ! Great advice from team dt 👏 . Jockanese ..... !🏴󠁧󠁢󠁳󠁣󠁴󠁿 😂😂 way aye man , canny packet o tuuuuuuudor !! 😉😂

@DecimalTenths Жыл бұрын

🤣🤣🤣🤣 had to give you a mention pal. Glad it's going well 👍👍

@StevenGodfrey3956 Жыл бұрын

It's going absolutely brilliant. Glad you told me about that clutch conversion because I didn't know about it and was dreading a heavy clutch or worse shuddery paddle clutch. See you soon for uprated suspension bushes and thanks again to all at D.T 👏

@NolTee2 Жыл бұрын

Interesting stuff as always. You have to do a video of what it like to drive after all you done so far.

@DecimalTenths Жыл бұрын

Very soon pal yes 👍

@vrsmartin2981 Жыл бұрын

amazing vid mate. agree with you there, why pay labour more than once when things are off just replace, saves doing it again later.

@DecimalTenths Жыл бұрын

🙌👌

@russgregory8537 Жыл бұрын

Another great video as always Nick. Informative and funny at the same time 😂 Look forward to the next installation and see what power the car makes on the dyno.

@DecimalTenths Жыл бұрын

Just the service I provide pal 🤣. Cheers

@thorsteinelstadolsen2005 Жыл бұрын

good job you`re hired

@DecimalTenths Жыл бұрын

🙌

@GPH2474 Жыл бұрын

The gun swap... funny shiz

@andrewlloyd2404 Жыл бұрын

Can confirm the helix organic gives a very firm clutch pedal. I kid of like it as it gives me confidence it can take some abuse! Out of curiosity does a braided clutch line and breather block upgrade soften the helix pedal feel at all?

@DecimalTenths Жыл бұрын

Yeah it is firm indeed pal. Helix is what we have for our track car, so we love them, but I just love this more for daily driver

@richardstubbings6962 Жыл бұрын

Turn up the boost 💨

@DecimalTenths Жыл бұрын

Yeah mate... just another few hundred mile 🙌

@andymitchell368 Жыл бұрын

quality bloody enjoyed this

@DecimalTenths Жыл бұрын

Cheers dude 👍

@Jordan_race Жыл бұрын

Awsome video as normal what friction plate do you use just golf luk also what power can they take ?

@DecimalTenths Жыл бұрын

Yes stock Sachs clutch plate. Works well

@jonasthemovie Жыл бұрын

Got a ECS RA4 stage 1 single mass kit laying waiting for my B7 1.8T. B5 S4 disc and cage. The dual mass clutch is getting sketchy so have to muster up to get it done.

@DecimalTenths Жыл бұрын

👌 Do it

@benjamindebacker8075 Жыл бұрын

Is there also like this e oem upgrade clutch for the Audi tt mk1 1.8 225 bam. Before on my tdi I always put sachs race engeneering but it’s not nice to drive in traffic when you standing still.

@sidbobby3233 Жыл бұрын

Sorry no nothing about Vag mate but r they dual mass fly wheels! Banging vid as always mate, really looking forward to mapping time... 😎🇬🇧✌👍👊

@DecimalTenths Жыл бұрын

Yes mate, dual mass flywheels 👍. Cheers man 😁

@sidbobby3233 Жыл бұрын

Genuinely thought that was a diesel thing.. 😎🇬🇧✌👍👊

@Benko_DieseL Жыл бұрын

What is the part number of the ttrs clutch?

@sebastianlorenzo4935 Жыл бұрын

Catching up on your content. What are you drinking ? Tea/Coffee?

@DecimalTenths Жыл бұрын

I'm a tea man, can't stand coffee...😝

@seanbong222 Жыл бұрын

Nice video mate, got a Mk2 TTS is the slave cylinder the same one as on your website ?

@DecimalTenths Жыл бұрын

It is pal, cheers 👍

@seanbong222 Жыл бұрын

@@DecimalTenths Hey Nick, any difference between the LUK and Sachs slave cylinder

@boostedcyot 5 ай бұрын

Hey guys what year TTRS cover plate do I need for my MK5 and what clutch plate do I run with it and what bolts ?

@jonclark25 Жыл бұрын

What if you're not concerned with pedal feel just wanting a durable reliable clutch/flywheel kit for up to stage 2+ power for a track car? Still TTRS kit?

@DecimalTenths Жыл бұрын

Yeah, the best bit about the TTRS kit is that it uses a sachs 240mm clutch plate. You could even customise it with a sachs performance plate and make it even better. If you do plenty of track time you'll soon be concerned about pedal feel 👍

@DX-TERiTY_ Жыл бұрын

Quick question, would you use the release bearing from the mk5 or the TTRS? Quite interested in this clutch setup for my mk5. At 492NM, OEM clutch is not happy.

@DecimalTenths Жыл бұрын

Yes the release bearing/slave from the Mk5 is used 👍

@DX-TERiTY_ Жыл бұрын

@@DecimalTenths Thanks a lot! Enjoying all the mk5 content!

@arronlowley5659 Жыл бұрын

hi nick, my clutch has suddenly started sticking to the floor and doesnt come back up by itself, cant see any leaks around the car but have noticed the brake fluid is very very dirty, what is the likely culprit, im assuming at this point most likely the slave cylinder.

@DecimalTenths Жыл бұрын

Hey pal, Could be the slave, the master, the inline damper, breakdown of the clutch bleeding block, failing and overheating clutch. Many things. Needs pulled really 👍

@nuuttihamalainen8774 Жыл бұрын

Doing same thing to my ed30. Does ttrs frictionplate fit ed30 or are you just throwing it away for no reason? Im about to order parts and wondering if I just buy ttrs pressureplate and use oem frictionplate.

@DecimalTenths Жыл бұрын

The conversion will utilise the stock friction plate and TTRS cover plate

@markshone4606 Жыл бұрын

The amount of cars I’ve had over the years were it’s had a clutch but they didn’t replace the slave is nuts whole box out just for a slave cylinder

@DecimalTenths Жыл бұрын

I bet pal, fit it and forget that shizzle...

@lizu2 Жыл бұрын

If instaling it to s3 8p would you install complete clutch kit with DFM or just the pressure plate ?

@DecimalTenths Жыл бұрын

I'd advise you do the full kit including DMF. However if you remove and the flywheel is in perfect condition then it's up to you 👍

@arronlowley5659 Жыл бұрын

how much would i be looking at nick for this kit and fitting, could it be done in the day? cheers pal.

@DecimalTenths Жыл бұрын

Hi pal, it's £1500 fitted, and would take about 6 hrs so easily done in a day.

@fuhadali5086 Жыл бұрын

This setup any good for 350~ bhp? If not, what would you recommend? Would ideally like that better pedal feel from the ttrs kit

@DecimalTenths Жыл бұрын

It's perfect for that power level 👌

@fuhadali5086 Жыл бұрын

@@DecimalTenths 👍🏼👍🏼👍🏼 does the sachs clutch plate come with the kit on your website?

@kenomies5086 Жыл бұрын

I got littlebit of play on my gearbox input shaft when moving up and down... Does that need to be absolute solid when moving that way?

@DecimalTenths Жыл бұрын

Ideally yes. It shows that there is wear on your input shaft bearings. Some last for a long time, some don't and whine.

@kenomies5086 Жыл бұрын

@@DecimalTenths Does that worn bearing cause cluch chatter? I got bad chatter on my S3. Cluch is Spec stage2 and solid flywheel

@pug155bhp 5 ай бұрын

So you don’t need the luk sac tool to fit this ? I’m planing on doing the upgrade on my 2008 TTS Quattro

@Brian-vr6nb 5 ай бұрын

Wondered this also

@EMC9 11 ай бұрын

My clutch in my gti mk5 judders when the clutch is out and in neutral. Would this be the concentric slave? i have recently replaced the clutch to a single mass. thanks

@DecimalTenths 11 ай бұрын

Could be many things, but it is common for some single mass setups too.

@faniourbano1732 2 ай бұрын

Can you help me with the part number of ttrs?

@tunedrestoration3565 6 ай бұрын

Do you know if the TTRS clutch upgrade can be used in B7 A4 EA113 ?

@DecimalTenths 6 ай бұрын

I'm not completely familiar with the clutch in them so can't confirm.

@tan9640 Жыл бұрын

Is this just a stock ttrs clutch you can get from euro and so on?

@DecimalTenths Жыл бұрын

No it's not

@user-bo8im2id1t 3 ай бұрын

What I must do to go with my clutch replacement gti mk7 mq350

@DecimalTenths 3 ай бұрын

We use the TTRS setup for that car too.

@arronlowley5659 10 ай бұрын

me again lol, had my ttrs clutch fit pal and when it was fit, which was only just over a week ago the biting point was really low, fast forward that week and a bit and around 200-300 mile later the biting point has gotten quite high, around the same as the stock clutch maybe even a tad higher, id have expected a little lower but is this ok?

@DecimalTenths 10 ай бұрын

Did you buy it off us dude?

@arronlowley5659 10 ай бұрын

@@DecimalTenths I didn’t mate it was bought from aks and fit by a family member who’s a mechanic

@DecimalTenths 10 ай бұрын

@@arronlowley5659 oh well....😬

@aed4n581 Жыл бұрын

Hi Nick, I’ve seen a post with ttrs mk2 clutch that apparently can fit on polo gti 6C. Is there any chance you can with me before I purchase it.

@DecimalTenths Жыл бұрын

Yes the TTRS clutch kit will fit with your EA888 flywheel. decimaltenths.co.uk/product/2-0-ea113-tfsi-tt-rs-o-e-genuine-clutch-kit-conversion/

@aed4n581 Жыл бұрын

@@DecimalTenths ok just £574.99?

@aed4n581 Жыл бұрын

@@DecimalTenths thanks, will they need to be drilled?

@Godzilla_90 3 ай бұрын

how did you bleed the clutch ? pressure bleed ?

@DecimalTenths 3 ай бұрын

Always on these yes 👍

@ep82chris 9 ай бұрын

Is it just a stock clutch plate used ? Thanks

@DecimalTenths 9 ай бұрын

Not a stock plate for a mk5.

@opetdobro5389 6 ай бұрын

Hello, does this clutch set fit the oem flywheel from the Golf 5 GTI. Is it a different thrust cylinder or can it remain original, I bought a whole new set from LUK 600014800. I'm just curious if I had to buy the whole set or can the flywheel and cylinder remain the same.

@DecimalTenths 6 ай бұрын

Flywheel and slave cylinders are oem 👍

@opetdobro5389 6 ай бұрын

@@DecimalTenths Slave cylinders Sachs or Luk , Thank you for help 😁😁.

@DecimalTenths 6 ай бұрын

@@opetdobro5389 we use sachs slaves

@davidwilson6134 Жыл бұрын

OK mate I know its an old video but can you get a second hand rear prop damper for a 2015 golf r cheers

@DecimalTenths Жыл бұрын

Hi pal We don't do anything with second hand parts. Not worth the hassle.

@davidwilson6134 Жыл бұрын

@@DecimalTenths how much can you get one for I was quoted 580 of lookers vw lol 😂

@DecimalTenths Жыл бұрын

@David Wilson Can probably beat that, will take a look tomorrow. Send us a message on FB or enquiries@decimaltenths.co.uk with your reg and ill confirm tomorrow pal

@davidwilson6134 Жыл бұрын

@@DecimalTenths awesome

@boostedcyot 5 ай бұрын

Drop the link where you got the friction disk from I can’t find it

@DecimalTenths 5 ай бұрын

We only sell the kits 👍

@boostedcyot 5 ай бұрын

I’m in California you would ship ?

@DecimalTenths 4 ай бұрын

@@boostedcyot yeah defo, send us a message enquiries@decimaltenths.co.uk

@michaelcox7509 Жыл бұрын

Think you could do with some new gloves for the next video 😂

@DecimalTenths Жыл бұрын

Can't mate, skint I am...😛🤣

@kevinmallon8692 Жыл бұрын

Are you doing a clutch pedal spring delete?

@DecimalTenths Жыл бұрын

No I like it 👌

@actualziNo 11 ай бұрын

Is that possible on the mk5? Thought that was on mk7.

@kevinmallon8692 11 ай бұрын

@@actualziNo Not sure. I didnt see that spring mind you mines an 06 Audi A3 fsi

@alright5897 Жыл бұрын

Will this also work for ea888.2

@DecimalTenths Жыл бұрын

Yes 👍👍

@moorhouse9949 Жыл бұрын

is it worth doing this to an s3 8p?

@DecimalTenths Жыл бұрын

Absolutely, great clutch for an 8P S3 💪

@ucefkh 3 ай бұрын

How much HP can this handle?

@DecimalTenths 3 ай бұрын

Weve ran 450bhp through them no problem.

@garyslater6095 Жыл бұрын

Is that £1100 fitted? How many Nm can it handle?

@DecimalTenths Жыл бұрын

No to fit it budget around £1500. There's people running 480ftlbs 650Nm through them. We are personally running nearly 600Nm through one

@garyslater6095 Жыл бұрын

@@DecimalTenths I’m presuming it will fit a transporter T6 2.0 TSI?

@markminheere3592 Жыл бұрын

you dont need to go to the gym when you manhandle those kind of gearboxes :P

@DecimalTenths Жыл бұрын

Yeah heavy beasts they are 💪💪

@rawbennett Жыл бұрын

Clutch fitted 🥱 now bring on the dyno porn!!! 😁👍

@DecimalTenths Жыл бұрын

Haha... wish this clutch conundrum didn't even happen...😝

@pdee886 Жыл бұрын

This. Always enjoy your videos man! Can't wait to see you send it on the rollers! 👍🤘✌️😎

@rawbennett Жыл бұрын

@@DecimalTenths awwww.... come on, admit it, you are a bit chuffed you now have a nice shiny TTRS one in there 😉😉🤣 and to be fair, with all the other work/parts you've put into it it's certainly not wasted, that thing is a frickin bad boy and probably one of my favourite mk5's out there, not exactly a sleeper but in the same ball park 👊😋 Looking forward to seeing the numbers!!