The Ultimate Axial Jeep Gladiator Stage 1

Рет қаралды 93,516

3 жыл бұрын

I'm very excited to have the new Axial SCX10III Jeep Gladiator here in the workshop! I take a first look, describe the differences between the RTR models, and the Kit, and start my first round of upgrades to make it the Ultimate Gladiator! In Stage 1, I tackle some mechanical upgrades, and add some weight down low to help compensate for the portal axles!
What upgrades would you do?
Buy the RTR here: bit.ly/2G8Dzrk
Stage 1 Upgrades:
Knight Customs MyMiniFactory: www.myminifactory.com/users/K...
SSD Parts: bit.ly/347JIfM
SSD Wheels: bit.ly/3kQm26d
SSD Rings: bit.ly/36gLe1s
SSD Brake Rotors (multiple offset options): bit.ly/3j7fqQu
SSD Hexes: bit.ly/308XRb8
ProLine KM3's: bit.ly/342FvtG
CCHand Fenders: www.aliexpress.com/i/10050012...
Our merch is super cool: teespring.com/stores/scale-bu...
#ilearnedsomethingtoday
#scalebuildersguild
Buy my gear here:
Sony a6500 amzn.to/2u9Rsfs
16mm Sigma amzn.to/2UFv5dD
55-210mm Sony amzn.to/2TH8DUR
Rhode Video Mic: amzn.to/2W56DlX
Zhiyun Crane amzn.to/2TIaxo9
GoPro Hero 6 Black amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
amzn.to/2udpvn4
Summer 2020 Stickers are sold here: scalebuildersguild.com/forum/...!
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuildersguild.com/forum
► Merch available here:
teespring.com/stores/scale-bu...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.

Пікірлер: 228

@Rokstardad82 3 жыл бұрын

I still would love to see the gladiator as the next scx24....perhaps a scx24.2?!

@maherkahala5269 2 жыл бұрын

You got ur wish lol

@carvidz7504 2 жыл бұрын

@@maherkahala5269 aww man you beat me to it

@chrisfigiel9547 3 жыл бұрын

This JT is going places. Can't wait to see how it comes together.

@michaelhoyle3266 3 жыл бұрын

Looks great! Amazing how just a few changes can make such a difference.

@pwrofgrayskull Жыл бұрын

I’m so excited to watch this series!! The Gladiator looks like a fantastic rig. 👍✌️

@maddhatter4077 3 жыл бұрын

Your videos are what have inspired me that scale rock crawlers need to be my next hobby. Paint up a small version of my 97 Jeep TJ!

@_Cryptotruth_ 2 жыл бұрын

First time RC owner. Had my JT RTR for a few months now. Have not been a KZfaq user so it sat around after that WTF moment when I realized this was not the plug & play I hoped it would be. These videos are a great help. Just took it into the backyard and put it and myself through the paces. Thanks for the ideas and suggestions.

@scalebuildersguild 2 жыл бұрын

Glad to hear that the videos were helpful! Make sure to reach out or join the forum should you have any further questions!

@rcbloke1766 3 жыл бұрын

Looking great Matt looking forward to the next update 👍👍

@trevorbyle957 3 жыл бұрын

Great video as always, I can’t wait to see what you do next. I have the SCX10 III kit with the dig setup. It looks like I need to save my money for the Gladiator now. Thanks, Matt!

@andyurena9720 3 жыл бұрын

Looks killer! I can't wait to see the next stage.

@BlindGuyRc 3 жыл бұрын

I love how big it is. Can't wait to see what you do with it.

@rcintro1489 3 жыл бұрын

Everything you do is awesome I'm sure this will be too. Great start looks awesome!

@sprather84 3 жыл бұрын

Yessir looking forward to seeing more of this build 👍 this would have made a cool budget build off

@ckfvideo 3 жыл бұрын

I found my baseball cap inside the receiver housing in the accessories baggie. Thought it was missing at first. This video was exactly what I was looking for to upgrade my RTR. Love the wheels and tires you picked.

@squarepantsist 3 жыл бұрын

This is going to be a great series! Love mine and have already gone for vitavon brass portal covers X4 and ali panhard, Knight Customs fenders, sliders and some other accessories, HW 540 2300kv with FS GT5 and cant get over how enjoyable it is to pilot and how capable it is on the Welsh mountains. Still awaiting Ottsix Baby Faces to arrive from the US. 50wt oil has made a great improvement to technical trailing/climbing and given more support to the heavy ish body. Really looking forward to seeing the project develop Matt, after a warm but not hot initial reaction to its release it quickly seems to have become a really well rated truck; and it climbs like an absolute goat! Look forward to the next episode

@GhostRider-ii7tz 3 жыл бұрын

The Jeep looks awesome.nice selection on parts Matt.💪

@ron7836 3 жыл бұрын

Love the wheels and fenders.

@schweglerd 3 жыл бұрын

I love that “overland cage”.

@hemitj 3 жыл бұрын

Another awesome video! Loving this series. Looking forward to the rest of the videos in this series. Thank you!

@scalebuildersguild 3 жыл бұрын

More to come!

@hemitj 3 жыл бұрын

@@scalebuildersguild YES!

@daemoninkubus 3 жыл бұрын

Looks awesome. SSD makes so many great parts

@zonegamma8197 3 жыл бұрын

Thanks for the review

@bucksrcworld8119 3 жыл бұрын

stage one looks great so far!!

@bryanwallace3347 3 жыл бұрын

I’m excited to see what’s next!

@TheWright1 3 жыл бұрын

Looking forward to this series. As I hope to get this truck in the near future. I would like to see how the Hobbywing fusion 1800kv would fit in this. That will and tire combo is perfect!

@davidnguyen1216 3 жыл бұрын

Just ordered mine after this vid. Will be here Thursday I'm excited. Plan on dropping my hbw axe 1900kv in

@williamlacroix4841 3 жыл бұрын

I plan on making mine look kinda close to the one I drive . I will be following this one real close 😀

@BennyTygohome 3 жыл бұрын

Awesome! I'm still in love with short wheelbase jeeps though. Would like a2dr jl, soft top both in RC and 1:1.

@latigo_rc7597 3 жыл бұрын

Looking forward to seeing how cool this one turns out.. One day I hope my squares are as well worn as yours.. Oh, and I called my Mom.

@operation11charlieinc 3 жыл бұрын

awesome like always Matt brother order the grey one last week, appreciate this vid, stay safe brother

@richletourneau4628 3 жыл бұрын

I put the new Hobbywing 1800kv Fusion system in my JT, love it!

@BANTAM53 3 жыл бұрын

Looks real nice! I traded my JKU for a JT! Love it!!

@andyrichey1192 3 жыл бұрын

Yeah looking sweet. I dig it. I wish the body came in black, appreciate you sharing. I'm looking to get one down the road

@scalebuildersguild 3 жыл бұрын

I would have liked to see Sting Grey, myself!

@premierscaler 3 жыл бұрын

It looks much better already. I can't wait to see what stage 2 going to be.

@Lauritsen24 2 жыл бұрын

Can you do a top ten sort of video about most scale looking chassis ?

@kregadeth5562 3 жыл бұрын

I really enjoy the intro to this episode

@RyanRKJ 3 жыл бұрын

They sure are taking their sweet time with those straight axles.

@ReadySetRC 3 жыл бұрын

Those wheels are impressive👌

@PacoRCysuscosas 3 жыл бұрын

I wait a grey one for christmas... I hope that Santa bring me one! Great review and great mods, as usual! Congrats

@johngrant1337 3 жыл бұрын

It look great and upgrade are super cool

@gwpattrick 3 жыл бұрын

Now i want one even more. My next door neighbor has a dark orange gladiator. It looks sharp. Although nothing beets olive darb green. I like add ons.

@MikelangeloPhoto 3 жыл бұрын

Now I really want one of these trucks.. ugh... looks great!!!

@ron7836 3 жыл бұрын

Michael Heliker I was thinking the same thing. I would love to get one and follow his upgrades

@MikelangeloPhoto 3 жыл бұрын

Ron Hinkle I know, right!?? I just can’t afford to do it every time sbg, or Harley designs does this!!

@wackyrc1394 3 жыл бұрын

Haha, nice one! Always on point Sir! Somehow the new colour on the backdrop escaped me before, overall, glad to hand out the 870th like, thank you 👍

@TOYitCUTE 2 жыл бұрын

Gladiator and Capra are one of the most underapreciated rc´s out there, )

@cleared8086 3 жыл бұрын

Yay he reveiwed it

@stevenmartinez2740 3 жыл бұрын

I just subscribed to ur channel today because I just bought my jeep Gladiator and tell u I'm very happy I haven't even run iit yet so I'm more happy to know ur upgrades I can't wait to upgrade mines slow I have the red one its awesome especially tha cowboy the driver

@aguilarsergio4323 3 жыл бұрын

Nice!

@rchome7512 2 жыл бұрын

Nice video I look at your video all the time I like the gladiator nice jeep!!!

@scalebuildersguild 2 жыл бұрын

Glad you enjoy it!

@timvanasen6711 3 жыл бұрын

Great video Matt I got the Black version, l got rc4wd mud slingers and RC Lions aluminum beadlocks I ordered the same portal upgrades this is my 3rd scx10iii, the kit has a 2014 Chevy Silverado crewcab on it and the rtr JLU got the personalised clear body, bummer you didn't get the baseball hat, see ya next upgrade 😎👍

@anibalbabilonia1867 3 жыл бұрын

Beautiful!👌🥰👍

@MsHigheagle 3 жыл бұрын

Wow it's a nice truck to start and will get the premium sbg upgrades, probs

@toddnothstine 2 жыл бұрын

I installed Club5Racing's EZOFF hinge and magnet system on my Gladiator. Now the body just tilts up out of the way like it does on the stock 1/24 Gladiator. And no more screwing with those awful body clips! Highly recommend. And if you need the body completely removed for working on the truck, it comes off with a couple easy screws at the rear.

@scalebuildersguild 2 жыл бұрын

Sounds good, I'll have to check that out!

@markcargill1185 3 жыл бұрын

For a motor, i would highly suggest the 1200kv hobbywing fusion, i know you dont like wheel speed as much as some but its so smooth and just the perfect amount of speed on 3s.

@Snowtrails11 3 жыл бұрын

I love my JT but I swapped to the 2 speed setup. I was immediately disappointed as the difference in gearing is not enough to use it more often. I then dropped the pinion a couple teeth to hopefully make more use of it since I run 3s.

@rcflashcars 3 жыл бұрын

nice post!

@desertbadgerrc3360 3 жыл бұрын

Can’t wait to see on Operation 11 Charlie’s channel tomorrow night!

@jazzyjair Жыл бұрын

Why nut take a few measurements and run to the lap top, then rhn to the 3-D printer and print out the lights bucket with a lip or tongue/groove - 2 sided tape fixture to the stock fender. Keep strength, have light bucket and a new income stream lol... 🤔 😁 Love SBG!!!

@moosejawrc 3 жыл бұрын

THIS! So excited! Many SSD parts I love to use. For sure getting those fenders, quite the game changer. How wide ssd rotor/hubs you went with? And anymore weight you plan on adding down low? Thanks again!

@GuyonaMoose 3 жыл бұрын

I just sent it on an ssd trail king from amain. Should be a fantastic 2nd wave lockdown project

@scalebuildersguild 3 жыл бұрын

Sounds great!

@Jmodderator 3 ай бұрын

DUDE I am FOREVER on the phone with my mom eating a sandwich when I'm driving my RC cars. I'm so glad they solved my problem :D

@scalebuildersguild 3 ай бұрын

😂

@spyderoutdoors2172 2 жыл бұрын

the only thing i like about having more wheel speed with my trail trucks is being able to clean out the tires in mud by spinning them faster than stock speed

@romanmarino9102 2 жыл бұрын

that is exactly what people thought when jeep first made that gladiator (i LOVE what Hennesy performance did to it its called the maxximus for a reason)

@kregadeth5562 3 жыл бұрын

I’m really interested in finding out what stage one means!! Love the your stuff . I

@WoodedCivilian 3 жыл бұрын

I love ssd parts I run them on all my rigs.

@RoosterRC 3 жыл бұрын

That lady looks sharp!

@zonegamma8197 3 жыл бұрын

Could you do a tour of your workbench and the tool you use please. I am returning to the hobby and seeying what you use and your setup would help. Thanks

@scalebuildersguild 3 жыл бұрын

I’ve done a workshop tour! Also cover a lot of the tools I use in other videos! Check the channel for more!

@daver18qc 3 жыл бұрын

I believe the fender's manufacturing process might be "SLS" which is what Shapeways use. It's "Selective Laser Sintering".

@scalebuildersguild 3 жыл бұрын

In retrospect, I think you're right!

@ironcityrc2583 3 жыл бұрын

I Just want that body! I have a long wheelbase crawler I built using a bpc chassis and element drivetrain

@chm779 2 жыл бұрын

Hey dud...!! Keep it up

@bgr1020 3 жыл бұрын

Good 👍👍👍

@josephlameris7097 3 жыл бұрын

I like the stock width ...

@CoachD386 3 жыл бұрын

🤘🏾💯 Intro lol

@imthejaybird 3 жыл бұрын

What foams are you running in the tires? Do you normally vent your tires?

@MrKongpvu 3 жыл бұрын

When you said there is some difference of the RTR from the kit version where you only talking about the JLU vs JT? I was under the impression that the JLU was exactly the same as the kit and no parts were subbed for the RTR.

@raizen82 3 жыл бұрын

eh i just chalk up the 6-bolt pattern to having the portal conversion of the JL and JT lol

@tugmchord 3 жыл бұрын

Never jumped into the initial 10 III releases. Actually hate the gladiator in real life but, the RC version looks great. Parts bin is already getting stocked full of hop-ups for it, when I buy it.

@jonthomas8487 3 жыл бұрын

Does it still click?

@braylonking-randall4309 3 жыл бұрын

second gear helps in snow and i paid for the whole truck im using the whole truck with my dx5c

@rcaxialscx10 Жыл бұрын

will the rock sliders fit a scx10ii

@allenpace1449 2 жыл бұрын

what break rotors did u use

@benfred8 3 жыл бұрын

Hey I just stopped watching and went searching for overdrive portal gears for trx4. I didn’t find anything. But maybe my search words were incorrect. “Trx4 portal overdrive output/input gears” So I’m back and finishing the vid. Are there overdrive options for trx4 besides the ring/pinion in the axles?

@bluegrassrc 3 жыл бұрын

What overdrive portal gears did you use?

@drewsin86 3 жыл бұрын

i be having a hard time chooses what kind of truck I want as my crawler. one being money but mainly idk what body I want. it most likely is the sc 10 or trx 4 but what body. I like old power wagons but jeeps look ok too and the old chevy body seems like a classic. idk

@BROtheBRAWLER 3 жыл бұрын

down pinion gear from 14 to 12, i use traxxax 32 p hardened steel one, much better performance and smoothness

@billcox87 3 жыл бұрын

great video brother, i gots ta git me one of them there trucks..lol hey man this may be a dumb question but, i've been in the hobby for many years and still have no idea what those metal collars are that are on some motor leads, any idea??

@modzilla74 3 жыл бұрын

I've found imo that a 2.2" rim with a 4.19" tire looks really nice and more scale.

@mojaverc1585 3 жыл бұрын

it looks more stock not necessarily scale.

@modzilla74 3 жыл бұрын

@@mojaverc1585 1.9's with 3.9 tires maybe..

@mojaverc1585 3 жыл бұрын

mike Morrow yeah whatever looks good to you I just prefer the more modified look

@modzilla74 3 жыл бұрын

@@mojaverc1585lol all good. Variety adds spice. Who wants the exact same style as everyone else

@mikej8832 3 жыл бұрын

I can hear Josh rolling his eyes now over all that brass..... 😂 Or is it from the wine Friday night? 🤷‍♂️

@scalebuildersguild 3 жыл бұрын

At least it's pretty stealthy!

@mikej8832 3 жыл бұрын

@@scalebuildersguild agreed... It's nice that they can coat the brass now...

@jdmfresh88 3 жыл бұрын

I got a $500 budget what would you recommend the axial scx10 3 gladiator or jeep JL traxxas trx 4 redact gen 8 axe edition?

@7sunsetmaro7 3 жыл бұрын

wish they would come out with the newer Tacoma body

@marymalone5188 3 жыл бұрын

Now your tolken! I love ssd I love brass and I love bfg! Maybe do the castle micro X esc I'm kinda interested in that one I'd be nice to see your thoughts on it. What body do you think axial will use next?

@scalebuildersguild 3 жыл бұрын

I used the Mamba Micro X in the C2X comp build, check that out!

@user-mx5vx1cm4p 3 жыл бұрын

I jumped here from stage 3. I want to trace this cool process from the source。

@allenpace1449 2 жыл бұрын

what lights

@ethancamus9180 3 жыл бұрын

What is the connector for the batteries when first put of the box is it a IC5 or IC3

@scalebuildersguild 3 жыл бұрын

IC3.

@vipxj1 3 жыл бұрын

When do we see a driving video. Love the truck.

@scalebuildersguild 3 жыл бұрын

Not until the build is complete!

@vipxj1 3 жыл бұрын

Fair enough then.

@LargeeeScaleLife 3 жыл бұрын

Any rubbing issues with the water stance I put extended portal shafts on my TRX defender and it rubs like crazy ended up taking them off

@scalebuildersguild 3 жыл бұрын

Rubbing? No. It wasn’t that much wider than stock.

@schweglerd 3 жыл бұрын

Calm it what you it want but “firecracker red” looks quite “josh orange”

@mattmays9063 3 жыл бұрын

Came to make this comment lol. You keep saying "red" but all I see is my favorite color, orange.

@JoeOvercoat 3 жыл бұрын

The crawler in the video is orange.

@milesfox_1717 2 жыл бұрын

Question. Could you hook something else to the 3rd channel besides the dig/2-speed?

@scalebuildersguild 2 жыл бұрын

You could put whatever you wanted there.

@Evan_Moore61 3 жыл бұрын

17:34 how are you supposed to stop without calipers on those rotors? I’ve done tons of brake jobs and I know calipers are a crucial part to stopping the vehicle.

@scalebuildersguild 3 жыл бұрын

Drag brake in the motor, duh. ;)

@DennisBeun 3 жыл бұрын

Great video, but that's nothing new. Lol. I already put the Rooftoptent and Sandladders. I ordered the front and rearbumper from CChand and the front fender flares as well. Installed the Mytrickrc lightkit for the JL, had to use the dremel for the rear rocklights to fit (3d printed holders) and next up is the AXE 540 2300KV and a Savox 1210SG. Already put some Boomracing Krait 1.9 rims with the Proline KM3 Mud terrain predator compound. All that bound to a DX5C with SR515.

@scalebuildersguild 3 жыл бұрын

Sounds great! Keep in mind, not everyone has this truck, or done what you have, and this is only stage 1!

@DennisBeun 3 жыл бұрын

@@scalebuildersguild Yeah, i really love the Gladiator. Very capable, out performed my friends TRX-4... #malicious pleasure..lol