The Ultimate Dollar Hack for Using ANY Pen in the Cricut Explore or Cricut Maker

Рет қаралды 202,542

Күн бұрын

Yes, I have a hack for you that will cost you one dollar and yet allow you to use any pen or marker in your Cricut Explore or Cricut Maker. Is it magic? Nope. Is it really that cheap? Yep! Ready to learn all about this mystery product that will change your crafting for good? Watch the video to see all about it!
#cricutpens #cricuthacks #cricutexplore #cricutmaker
Linking to a ton of things below. Please note that these are all affiliate links.
Pens tested:
Cricut Pens www.thecountrychiccottage.net...
Regular Infusible Ink Pens www.thecountrychiccottage.net...
Sharpie Fine Point amzn.to/2YPUvco
Sharpie Paint Pen amzn.to/32Hrf92
Pilot Precise amzn.to/3jutQtz
Crayola Pip Squeaks amzn.to/2EGOh7X
Tombow Dual Tip (fine tip only) amzn.to/3jsDlcP
Artesprix Sublimation Markers shrsl.com/2fkax
Tombow Dual Tip amzn.to/3jsDlcP
Crayola Super Tips amzn.to/3gIVFws
Sharpie Ultra Fine amzn.to/2YPKNHf
Marvy LePlume amzn.to/3hKGpk6
Sakura Micron amzn.to/31IHPpL
Prismacolor Premier amzn.to/3gKp21i
LePen Drawing amzn.to/2ENsdbq
LePen Fine Point amzn.to/31Jn6lK
Pen adapters in case you want those: amzn.to/3ol70Xf
Other videos you may like:
Pens in the Cricut Joy • Pen Brands You Can Use...
How to Use Pens • How to Use the Cricut ...
Addressing Envelopes with a Cricut • Addressing Envelopes w...
0:00 Introduction
0:52 Pens in a Cricut
1:55 Determining Pen Depth
2:35 Pens with No Adapter
3:44 Removing the Insert
3:59 Hacks that DO NOT work
4:55 Pen Adapters
6:05 The Ultimate Dollar Hack
10:24 Wrap Up

Пікірлер: 355

@brianmi40 2 жыл бұрын

INSTEAD of just using the marked paper for setting depth, CUT a scrap of wood (say, 1/2" by 3" long by the height from your piece of marked paper), or glue together a stack of cardboard/chipboard, etc. and you will have something to slide under, and then just press the pen down to make gentle contact with that thickness of object. No more sighting or verifying depth.

@TheBowdy666 2 жыл бұрын

I thought of that to make a scrap wood depth stop

@spoketomyheart5800 2 жыл бұрын

Good idea

@kkawesomable 2 жыл бұрын

anybody know the height? cricut maker 3 doesn't come with any pens/markers

@HeatherAyersTMS 2 жыл бұрын

Craft sticks make good depth gauges :)

@opera13s 2 жыл бұрын

@@kkawesomable Another video said just above the height of three nickels, in the Explore.

@Tinu_ka Жыл бұрын

Thanks for your very well explained tutorial. To adjust the height of the pen, there is a much easier way in my opinion: juste put a cricut pen (without its cap) next to the pen you want to use (also without its cap). Simply on your desk, not in the cricut machine. Make sure the tips of the two pens are exactly next to each other (leveled), for example by puching with a ruler against the two tips at the same time. Then, on the pen you want to use, stick a piece of sticky tape at the exact same height as the arrow on the cricut pen (the bottom of the sticky tape should align with the bottom of the arrow). When you then want to use that pen, to adjust the height, you look at the sticky tape, exactly as you would look at the arrow on a cricut pen. This way, it's way more acurate in my opinion AND you don't have to adjust the height with a piece of wood or paper every single time you use this sharpie. I hope my explanation was undersandable, English is not my first language and without a picture it's something hard to explain.

@GlitterKitten1492 2 жыл бұрын

This is so much more in depth, and explanatory than ANYTHING else i've seen online. thank you so much

@mandyneedham6641 3 жыл бұрын

Hi Angie, If you cut the pencil holder in a spiral instead of straight, it holds the pen more centrally and more securely, and the spiral just adjusts to the size of the pen.

@AngieHolden 3 жыл бұрын

WHOA!! You just blew my mind! Thank you!!

@samanthahanley9167 Жыл бұрын

hmm how do you mean in a spiral?

@Seimonster27 Жыл бұрын

@@samanthahanley9167 going diagonal up the pencil holder, like a candy cane's stripes.

@carenin59 5 ай бұрын

Thank you for the awesome idea!!

@carenin59 5 ай бұрын

Sorry I'm a little late to the party on this site. I'm recently retired, and I just purchased a used Cricut Explore Air on Ebay and just now learning how to use it. It can be a tad over whelming. I have an original Cricut (the first one) but this one is a whole different dimension! I'm so grateful for people like you that thoroughly explain what there demonstrating. I was so glad to find this video and know that I don't need to buy these expensive pens and makers just to run my Cricut. So, with that being said. THANK YOU!! I'll keep watching in the future.

@AngieHolden 5 ай бұрын

So glad you are here!

@christie4258 3 жыл бұрын

This is awesome! I already have hundreds of different pens & didn't want to be limited to Cricut pens. Thanks so much!

@AngieHolden 3 жыл бұрын

Happy to help!

@paulhuyser1027 Жыл бұрын

Thank you, thank you. The pencil grips were a wonderful suggestion. It was exactly what I needed for the Sharpie paint pen. Loved the way you checked the depth also, great tips.

@hudsonfrank1121 Жыл бұрын

Thank you for making this. Gotta love products that make you "think" you have to "use" their products only. You can also use crayons if set up correctly.

@fairychick77 2 жыл бұрын

This is a great video! Thanks, Angie! For anyone trying to gauge the space on a Maker, I used 6 wooden coffee stir sticks bound together tightly with those tiny rubber bands used for hair braids. It is exactly the right height!

@AngieHolden 2 жыл бұрын

Great tip!

@fernandamayoral3197 Жыл бұрын

Hahaha Americans will use everything but metric system

@Vacilando22 Жыл бұрын

Would you mind measuring the depth of said 6 coffee sticks? I don't have any cricut pens or coffee stir sticks 😂

@profwemo Жыл бұрын

@@Vacilando22 I had to google the thikness of a coffee stir stick 😅

@flossingdebi 3 жыл бұрын

Angie thank you taking the time and sharing this amazing hack. I like you had bought those plastic pen adaptors as I had a lot of pens around the house before I bought my Cricut and did not want to spend money on more pens just to fit in the Cricut, but they only fit a small amount of pens. I also bought the Dollar Tree pencil tree holders but did not cut them down the middle, great idea!

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@honeymelon329 Ай бұрын

My Cricut machine is the original 2014 Explore (10 years old now and still love it!), and I have always had the biggest problem using the actual Cricut brand pens in their own pen holder that came with the machine! They will get halfway through writing the message and then POP OUT ALL ON THEIR OWN! Ruins the project run and I have to start over. It was so frustrating. So, first I bought that set of 3 (pink, blue, mint) adapters for Sharpie markers shown in the video -- they work perfect for Sharpies - highly recommend those if you love Sharpies. But then I wanted to use my beloved Pilot G-2 1.0mm ball point pens, so I tried the dollar tree foam pencil grip hack and O.M.G. it is perfect!!! Now I use the cheap little foam pencil grip more than any other adapter because it basically works for EVERY type of pen (at least, all the ones that I have tried). This hack works for sure!!

@rondathomas804 Жыл бұрын

I love this hack! I've been wrapping and taping paper towel around my markers. THANK YOU!

@a3dpntr 2 жыл бұрын

Angie, you're a genius! Love all these options! Thanks for your kind sharing.👌👏

@michellesteele7326 3 жыл бұрын

Thank you so much! I'm so excited to give this a try. The depth hack is super helpful and I hadn't thought about that!

@AngieHolden 3 жыл бұрын

You're so welcome!

@robinrhodes8064 3 жыл бұрын

Thanks Angie, I always learn something from you, great videos. Thanks for all you do to give us information so we can make an informed decision. Like I said before, totally new to cricut getting the joy for Christmas and just now getting ready to try it....lol

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@Marysol805 2 жыл бұрын

Thank you SO much for showing this hack 😃 I would have never thought of it 😋

@JewelrybyJeanette 3 жыл бұрын

Thank you so much for your honest advice and opinions. It was great to find an inexpensive and easy way to use my favorite pens in my Cricut Maker. Well done!

@AngieHolden 3 жыл бұрын

You are so welcome!

@juliacleveland 2 жыл бұрын

I am so thankful that I found your channel! I am totally new at this and you have helped me so much! Any question I have, you always have a video!! Thank you so much!!

@Veggiebaby08 Жыл бұрын

I really want to say thank you for the hack. It is awesome.

@lindasuehundley6864 2 жыл бұрын

Awesome video. Thank you, Ms. Angie!!!

@lilness713 2 жыл бұрын

This was a life and money saver!!! thank you!!!!

@Reneesfun 3 жыл бұрын

Thank you for testing all of those pens out for us! I can’t wait to try it with my Artesprix and regular ink pens.

@AngieHolden 3 жыл бұрын

Hope you enjoy it!

@sb7615 3 жыл бұрын

Did you try with the artesprix pens?

@coastalb1 3 жыл бұрын

I don't know how I was not already subscribed to your channel, I've learned so much from your tutorials. Thank you!

@AngieHolden 3 жыл бұрын

Thanks for subbing!

@JM-kh1jm 2 жыл бұрын

YOU'RE A GENIUS! And, you're so generous to share with us! So glad I found you today! :)

@AngieHolden 2 жыл бұрын

Wow, thank you!

@AbiNomac 3 жыл бұрын

I’m so happy I discovered your channel. I’m about to purchase a Cricut Maker and your videos help eliminate the fears I have as a beginner.

@AngieHolden 3 жыл бұрын

You can do it!

@AbiNomac 3 жыл бұрын

@@AngieHolden - Thank you Angie, your tutorials will be with me every step of the way.

@jazmora5147 3 жыл бұрын

This was so helpful!!!

@ShaylaM 2 жыл бұрын

Thank you so much for sharing this!

@crystalratclffe3258 Жыл бұрын

Thank you! As a new owner of second hand Cricut, your video is helping set up from the start.

@AngieHolden Жыл бұрын

Wonderful!

@bonniepolanowski1283 2 жыл бұрын

THANK YOU!! You've been so amazing!

@TheChai85 2 жыл бұрын

This is an amazing hack. Thank you!!

@cblu535 Жыл бұрын

TY! These devices are already such a joy to experiment & use your creative juices with, but This almost made me cry. I've only had this thing about a month, and had a shopping cart on their with pens in the cart...lol...knowing I was going to figure out a way to use any that wasn't too fat; then I saw the guy use the eraser measurement, but YOU really got my thoughts going when you showed that you could take the inner tube out. Now I don't have to worry with breaking it, so IT'S ON! I then put a pencil in and saw this bad boy draw a flower with a regular number 2 pencil... THESE PEOPLE CAN GET AS WELL KNOWN AS MICROSOFT JUST FROM THE NUMBER OF HACKS... THEY REALLY NEED TO ROLL WITH THIS, and I suppose they are, and that's why they have a huge sale on their brand pens. Thanks again, YOU ROCK!... btw: I just stand the pens n pencils up together on a flat surface and mark a line across them where the arrow is on the cricket pen since they all have varying lead lengths and pause printing and push them down as the lead gets shorter. I will eventually mark

@conniel.4601 3 жыл бұрын

Very helpful, as usual. I did buy the Sharpie adaptors, per your suggestion. They work fine. Will be using the pencil grips for other pens. Thanks!

@AngieHolden 3 жыл бұрын

Glad it helped!

@cedricmcneal4711 Жыл бұрын

Your video saved me so much time and money...THANK YOU!

@joyscranfield5527 3 жыл бұрын

Great info! Thank you for doing the hard part for us🌹

@AngieHolden 3 жыл бұрын

Any time!

@c.manygoats5731 2 жыл бұрын

Thank you for sharing your hack! I did not have time to order adapters so this hack will do just fine for my project :D definitely going to order adapters though!

@michaletaylor7532 2 ай бұрын

Omg yyyyyeeeessss thank you❤ i hope you do more of these, just found you and i love it❤ thank you

@AngieHolden 2 ай бұрын

Of course!!

@lifeisbeautiful7464 5 ай бұрын

Ty so much for this video 🤝🏾

@lynncookcook6342 3 жыл бұрын

Thanks, I found this very informative

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@chmtnwmn58 2 жыл бұрын

I love your videos. You're a wonderful teacher. THANK YOU!

@AngieHolden 2 жыл бұрын

Thank you so much!

@onecraftycookie Жыл бұрын

Girl that is just like my Cricut Explore Air 2 love it. Thanks for sharing hunny hugs Terrie

@CrazyCountess 3 жыл бұрын

Thanks Angie!

@highmaintenancegirly 3 жыл бұрын

Sooo helpful! Thank you so much!!

@AngieHolden 3 жыл бұрын

You're so welcome!

@briaellison3256 3 жыл бұрын

Such a good hack, thank you for sharing.

@AngieHolden 3 жыл бұрын

You are so welcome!

@nancysanders8013 2 жыл бұрын

I am learning a lot from your videos. Thank you!

@AngieHolden 2 жыл бұрын

Happy to hear that!

@flannelwhiskers Жыл бұрын

This is a way late reply, but I'm loving your huge library of videos; they're still valuable for users, even years later! This was extra useful for me because - while I don't mind buying Cricut brand pens - I can't find just normal 1.0 markers in plain colors! I have a set of metallics, but if I want just basic colors of the rainbow, I'm stuck with 0.4 fine points. So, even as a Cricut loyalist, I needed this hack🙂 Thanks!

@AngieHolden Жыл бұрын

Glad it was helpful!

@zubedaalawie2453 10 ай бұрын

This is a awesome video...thank you so much and can't wait wait to try it!!!!!

@AngieHolden 10 ай бұрын

Hope you like it!

@kendrac.8874 3 жыл бұрын

This is so cool. I've never used the markers in my Cricut but definitely plan to soon.

@AngieHolden 3 жыл бұрын

Enjoy!

@BeCreativewithKathy 9 ай бұрын

Great video, Angie. Thank you!!

@AngieHolden 9 ай бұрын

Glad it was helpful!

@MileyonDisney 3 жыл бұрын

Creative! Thank you!

@AngieHolden 3 жыл бұрын

Thank you! Cheers!

@sharonjansky3877 3 жыл бұрын

Great info. Thank you so much.

@AngieHolden 3 жыл бұрын

You are so welcome!

@bayoufever 3 жыл бұрын

Thanks for the great info!!!

@AngieHolden 3 жыл бұрын

Any time!

@olgatorres4154 3 жыл бұрын

Thank u so much !!! This is a fantastic tutorial.

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@dez5 2 жыл бұрын

This Video is Priceless Hack. Thank you.

@nhcharmedone 3 жыл бұрын

Genius! Thank you!

@AngieHolden 3 жыл бұрын

You're welcome!

@WeWillServeJehovah 2 жыл бұрын

Thanks I found some thin foam and wrapped it around till it fit properly. It works!

@AngieHolden 2 жыл бұрын

Good to know!

@nathaliarocha7962 Жыл бұрын

Thank you so much for this video! 💗

@AngieHolden Жыл бұрын

Glad it was helpful!

@diannerobert3822 8 ай бұрын

Very good hack for pens with cricut ! 🥰👍

@lorlor2831 3 жыл бұрын

Brilliant hack! Thanks

@AngieHolden 3 жыл бұрын

Thanks for watching!

@cowrazy0219 3 жыл бұрын

This is a fantastic video. I had just purchased the pip squeaks for my Joy. Now they’ll work on my Maker as well. Love items that work that only cost $1!

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@KathysScraps 3 жыл бұрын

Elaine Pierce, can I ask? Where did you find the Crayola Pip Squeak markers? I need more

@elenawebb1864 Жыл бұрын

@@AngieHolden pp

@grapes770 3 жыл бұрын

Great hack! Thanks 😊

@AngieHolden 3 жыл бұрын

You are so welcome!

@conniel.4601 3 жыл бұрын

Thanks, Angie!

@AngieHolden 3 жыл бұрын

You are so welcome!

@kassandrav504 3 жыл бұрын

Girl! You rock! Thank u for sharing

@AngieHolden 3 жыл бұрын

You are so welcome!

@mrnoname6327 2 жыл бұрын

3D print the adapters, works like a charm!

@khoskins6533 2 жыл бұрын

Excellent video. Very informative

@AngieHolden 2 жыл бұрын

Glad you enjoyed it!

@annettemurphy8052 3 жыл бұрын

Awesome info!

@AngieHolden 3 жыл бұрын

Thanks for watching!

@islandteaser 2 жыл бұрын

wow i bought one of these grips cause in my mind i should be able to use different pens in my cricut machine and i couldnt get it figured out cause i didnt know i could remove the original holder . im glad i came across this video thanks

@AngieHolden 2 жыл бұрын

Glad I could help!

@cwilliams1961 3 жыл бұрын

Thank you! game changer hack!

@AngieHolden 3 жыл бұрын

Right?!??

@chicagogirl8173 2 жыл бұрын

This is awesome! You're the best. Now I can finally buy that giant Sharpie mega bulk pack from Costco, man I've been eyeing that thing for a while hoping I can find a way to use it in my cricut! This is gonna be fun lol. Thank you :)

@AngieHolden 2 жыл бұрын

Enjoy!

@mindellica 2 жыл бұрын

Thank you absolutely learned you’re awesome!

@AngieHolden 2 жыл бұрын

Happy to help!

@juliegayson7947 Жыл бұрын

Thank you so much. 💓

@lguimarin06 2 жыл бұрын

Great tutorial! I really appreciated that you showed several different hacks. Do you have a video or advice on choosing which pens to use with which types of projects/materials? I'm going to be writing on some balsa wood and looking for recommendations.

@AngieHolden 2 жыл бұрын

I don't. Writing on balsa I would do something that dries really quickly as it will run badly.

@patriciadelamarter3604 2 жыл бұрын

Wonderful

@joonnijohnson8044 3 жыл бұрын

thank u so much. This is awesome

@AngieHolden 3 жыл бұрын

Glad you like it!

@lotlotdg4300 3 жыл бұрын

You're awesome thank you once again....

@AngieHolden 3 жыл бұрын

Thank you too!

@created2bless322 3 жыл бұрын

Squeaky brand spanking new learner! I’ll be watching more! You were the 1st person that I watched where Joy came out because I wanted one and Shhhhh I still do. My daughter opted for the Cricut Explorer Air ll. Thank you for your information and inspiration ✌🏼💕😊

@AngieHolden 3 жыл бұрын

Yay! Happy to have you!

@lauramartin7300 3 жыл бұрын

You will learn alot from Angie..

@jesseelisabeatty8205 2 жыл бұрын

Me too

@julias2855 2 жыл бұрын

Love ur vids!! Always share ur dummies vid on Facebook. Love it!!!

@AngieHolden 2 жыл бұрын

You rock!

@joycebarker2288 10 ай бұрын

i saw somewhere that a craft popsicle stick under neath the tip is a great measurer

@debrasloan3415 Жыл бұрын

This is awesome! I use the Pilot Frixion erasable pens to mark fa ice because they are heat sensitive and the markings disappear when I iron them. I have been pulling my hair out as none of the points are long enough to touch the fabric in my Cricuit. I am going to get some of the grips from the Dollar Tree tomorrow and see if that will do the trick. Thank you

@chandellecarter5247 Жыл бұрын

Did this work? Trying to find a solution for the Frixion pen as well!

@nikradik 3 жыл бұрын

This helps me so much this machine gets expensive to use.. thnx so much

@AngieHolden 3 жыл бұрын

Happy to help!

@flocondeneige3856 3 жыл бұрын

Thank you so much for your videos. I am a new " cricuter". I have the Maker😋

@AngieHolden 3 жыл бұрын

You are so welcome!

@caryswanson4486 9 ай бұрын

❤🎉Oh my goodness!! Thank you very much

@AngieHolden 9 ай бұрын

No problem 😊

@elfgirllizzie2018 2 жыл бұрын

I’m late to the party but I got a pack of 12 adapters on Amazon for $5. I do have some gel pens I’m totally gonna try this with. Thanks

@elizabethvallely4044 2 жыл бұрын

Thank you Angie for this video was very helpful and thank you for explaining very well! Hugs Liz...

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@lauramartin7300 3 жыл бұрын

Didn't think of the pencil grips for this. I 've used them on my crochet hooks. I'll be stealing from there. lol I put a cricut marker in my maker, took another marker to draw a line on it, for where it sat in machine, then matched to another marker ,drew a line. also I had cricut marker in, placed a stick under it to see for depth, as you did with the paper. THANKS FOR ALL YOUR VIDEOS!!! very helpful. Watching you is why I choose the maker..

@AngieHolden 3 жыл бұрын

YES! I had trouble seeing the lines with the pencil grip on it so came up with the paper but you can do that too!

@AngieHolden 3 жыл бұрын

YES! I had trouble seeing the lines with the pencil grip on it so came up with the paper but you can do that too!

@shannonharris1802 2 жыл бұрын

OMG, This is brilliant! I searched high and low (I'm a teacher, I should have those pencil grips, right!?) and could not find one! However, I did have some stretchy Coban on hand that worked PERFECT!

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@3Dprint4you 6 ай бұрын

If you own a 3d printer the adapters are very easy to print with a little know how. I say a little know how because you should probably use a filament called TPU and it is a little trickier to use than printing with PLA. PLA will work but it is much stiffer and you may not get the grip you would with TPU. The files are available on pretty much all of the web sites that have .stl files available.

@gailrhodes7771 2 жыл бұрын

Thank you so much

@AngieHolden 2 жыл бұрын

No problem!

@MichelleColeCreates Жыл бұрын

That pencil grip is a fantastic idea!!!

@AngieHolden Жыл бұрын

It really is!

@MichelleColeCreates Жыл бұрын

I just cleaned out a basket and found a pack of 10 of those grips! Score!!!

@Autism_Forever 2 жыл бұрын

Thank you! ♥ Just what I needed :) I wonder if a strip of adhesive craft foam can be used to wrap around most frequently used pens. I am going to try that :) Thank you again! ♥

@AngieHolden 2 жыл бұрын

Good idea!

@nikkihoward6914 2 жыл бұрын

THANK YOU!!!

@AngieHolden 2 жыл бұрын

No problem!

@Carole_Williamson 2 жыл бұрын

Got a pack of 15 adapters from Etsy that are marked with the type of pen they work with for about $7 - $10 total. Haven’t tried them yet but they look just like the adapters in this video

@Sadipa89 Жыл бұрын

Have you tried them yet? I'd love a link if you're happy with them.

@TheSouthbreeze Жыл бұрын

I received some Zicoto pens as a gift, and they do not work as is. I wrapped a 2" piece of duct tape around lower portion of pen along with the provided Cricut pen adapter and it works. Your video gave me the idea. Thanks!

@AngieHolden Жыл бұрын

Thanks for sharing!

@mentesymanoscreativas 3 жыл бұрын

Hello Angie! Amazing tutorial as always. Do you use the same process used on the explorer and maker with the Joy with the smaller crayons markers? How do you measure the depth or height for the tip, from the marker or pen? I saw you using a piece of paper.

@AngieHolden 3 жыл бұрын

Here is the video for the Joy: kzfaq.info/get/bejne/abKHZK2l1dGvdI0.html

@sharlaenlow8480 2 жыл бұрын

I’m a complete newb at Cricut. I bought some markers a while back for signing my tumblers. I’ll try the hack with these but I have a question. Have you tried permanent markers on vinyl such as Oracle 651 or 631? And thank for the writing font filter hack! This will help me so much! I may just use mine tomorrow after 2 weeks of looking at it.

@AngieHolden 2 жыл бұрын

I haven't used markers on vinyl!

@kristlynn7123 Жыл бұрын

thanks for the video. Before i watched this i had some painters tape laying next to me and so i used tape as a simple solution to hold the marker in the machine..

@AngieHolden Жыл бұрын

Excellent!

@yvonnetucker1416 3 жыл бұрын

great to know

@sagetx Жыл бұрын

Reusing the same pens over and over? Set the depth the first time, then wrap a strip of making tape around the pen level to the top of the clamp. Visual gauge right on the pen for next time!

@bargeiger50 2 жыл бұрын

I did find a set of adapters at Amazon that has 7 adapters in the set. It will work with a really wide variety of pens

@audra6403 2 жыл бұрын

link?

@halenarose5653 2 жыл бұрын

LINK!!!!! Seconded! Thanks fellow crafter!

@ehodge54 3 жыл бұрын

Thank you Angie for your informative video. Cricut doesn't have any super fine point gold pens & I have a couple of ones I found at an office supply store that I think I can now use with your hack.

@AngieHolden 3 жыл бұрын

You are so welcome!

@ehodge54 3 жыл бұрын

@@AngieHolden I was able to do your hack & it worked perfectly! Thanks again, Angie!

@catmandu2875 2 жыл бұрын

Just an fyi, for this process, I would make a piece of wood to use for creating an easy method to ensure the pen is positioned correctly. Just make the wood the proper thickness, slide it under the pen area, drop the marker in to the cricut, let it land on the wood piece. Tighten and pull the wood peice out. Hope this helps.

@AngieHolden 2 жыл бұрын

That's a great idea!

@haert2run 2 жыл бұрын

Do you know what height it needs to be?