The Ultimate Knife Sharpener? - Ameribrade Knife Sharpener Review

Рет қаралды 49,218

Жыл бұрын

For the right person, this sharpener might be the best knife sharpener in the world. Are you the right person? Find out in this review as blacksmith Walter Sorrells discusses the Ameribrade sharpening system made for the Ameribrade 2X72 inch belt grinder (though they also make versions compatible with other grinders).
Like the videos? Show some love for the Channel! Every little bit is MUCH appreciated... / waltersorrells
AND - FREE PDF - Five Killer Tips & Tools: waltersorrellsblades.mykajabi...
Check out Walter's videos about making Japanese swords! www.waltersorrellsblades.com
FOLLOW ME ON SOCIAL:
Facebook: / waltersorrellsblades
Instagram: walterstactix
Twitter: @WalterSorrells
WANT TO BUY ONE OF MY BLADES?
Tactix Armory knives: www.tactixarmory.com

Пікірлер: 46

@daveh777 Жыл бұрын

Thanks for another great video Walter.

@keganwallace8753 Жыл бұрын

This channel rocks and I love the content! Sorry for missing a bunch of content. Just preoccupied with the day to day. Best wishes Walter

@jeremynedrow7003 Жыл бұрын

Glue two pieces of leather on the end of the clamp jaws to keep it from scratching.

@troseknives 2 ай бұрын

I just purchased this and it works great. I like how you run the platen straight up and down. I did it with platen laid back and you have to reach out and seems to allow for some unnecessary arm movement. I will try your method next time. And the trick for leather strop should fix the little problem I had with it rounding over and seems to dull it a little. Thanks for the advice.

@steveocvirek6671 Жыл бұрын

Great video and I absolutely agree with you 100% that this is the best system out there. I seen your video on the AmeriBrade grinder and purchased it along with the knife sharpener. I get the same exact results. Thanks for making this video and all your others!

@kevincolwell9575 Жыл бұрын

thanks Walter. for what it is worth, I use the same basic process without the jig on my kmg. The leather is awesome. I got the idea from an old Steven R. Johnson video (he used disc sanders with cork and leather). This leather belt has been my secret weapon for quick sword sharpening, too. It looks like a Lansky system for a belt grinder. But, it was good to learn that this worked better for you than the paper wheel system on a little bench grinder that a number of people use. thanks for the insights.

@opichocal Жыл бұрын

Love it! Now I need a belt grinder

@tobymaples7646 Жыл бұрын

I just bought my first 2x72 and now i am seriously considering ordering this immediately. It only took one knife of sharpening by hand on the TSPROF that started with a pretty thick edge out of heat treat to convince me lol.

@dougcorum8718 Жыл бұрын

You won't be disappointed.

@tacticalcenter8658 Жыл бұрын

Your just going to burn the edge on the belts. Stick with the tsprof. It may take longer but you will have better edges.

@alexlock3176 Жыл бұрын

Finally got a grinder that runs in reverse and this was the first accessory I ordered!

@SolaceLovesSilas Жыл бұрын

This was fun to watch.

@dougcorum8718 Жыл бұрын

The Ameribrade 2x72 has a tracking knob on the left side in back in front of the motor. This one is for the reverse tracking. Best sharpening system I have used!

@AnonYmous-ii4tc Жыл бұрын

Great to hear it right from the horses (pro’s) mouth. Thanks Walter! Love that stropping belt idea, too.

@WeberSharpening Жыл бұрын

Try some leather conditioner and Tormek Stropping Paste on the leather belt. I apply the Tormek paste before every sharpening session and find that it works way better than the green or white compounds that build up on the belt over time.

@jukio02 10 ай бұрын

I used an oscillating multi tool to sharpen my knife, worked amazing actually. I used the fuel milwuakee m18. I wish they made specific sandpaper for knife sharpening, though.

@NuManXplore Жыл бұрын

Maaaaan, been looking for something like this for years!! I cobbled together my own set up to attempt this, but it never really worked well at all. Might have to save up my Canadian pesos for this tool!

@EdwardIglesias Жыл бұрын

I tried the whole leather strop on a grinder with no reverse. Knife cut it in half the second it touched the leather and sent the belt flying. Luckily the knife stayed in my hand.

@keganwallace8753 Жыл бұрын

My TA Agent would be my go to EDC if it had a horizontal carry system. The spin is capable of striking a faro rod and skinning game. I'd just prefer a horizontal leather carry option

@guitarzarfun 5 ай бұрын

I'm wondering if it couldn't be used for grinding bevels in knife making like a Semi-guided way to do hollow grinds or flat grinds.

@jprall44 Жыл бұрын

Have you tried grinding bevels with it vs a jig?

@leardi58 Жыл бұрын

What would be your second pick for just a diy type of guy. Don't have to sharpen knifes every day but when I do I would like it to be razor sharp. Thank you

@Dreweldeenknives 8 ай бұрын

I use stones but once I get a grinder I’ll try it out differently

@knifesharpeningnorway Жыл бұрын

20 per side is more than i use on my chopper. i use around 15-17 per side on my outdoor chopper and 15 per side for outdoor blades.

@keganwallace8753 Жыл бұрын

I enjoy my TA Agent. I just wish I had a horizontal carry leather sheath for it. The supplied kydex is not my bag baby

@billclancy4913 Жыл бұрын

My leather belt shakes like a hula girl...I see you'rs wiggles too, but not as bad. I scored one of these sharpening kits from Ameribrade with a 1.5" tool arm to fit my grinder, and it works pretty well, I think I need to spend a bit more time with it before I'm fully comfortable with it.

@garycallahan7867 Жыл бұрын

Do you have enough of the blade holders to clamp up an entire batch so that you can go through the belt progression without having to clamp/unclamp?

@robertmunguia250 Жыл бұрын

Where can you get that jig?

@keithwhatley5094 Жыл бұрын

I don’t have a VFD so I can’t run in reverse and I’ve been getting an initial primary bevel on my knives by just super gently using the 120 ceramic and hitting it up above the platen behind the contact wheel there where it’s a little tight and not too much of a convex situation resulting. I don’t lean on it obviously because I don’t want to burn my Heat treat up but I’ve never even seen it come close to catching so I think as long as you use some finesse which you should be doing anyway, Mr. Sorrels is right. Running forwards if you know what you’re doing isn’t going to be a problem with regular ceramic belts. Been doing it awhile myself.

@terrymiller9717 Жыл бұрын

A master knife Smith that I have worked with uses the same method as you.

@johnvauss317 Жыл бұрын

Where are you located

@timjackson5555 Жыл бұрын

Holder looks identical setup to the Tormak T series grinders, the rest not so much.

@terrymiller9717 Жыл бұрын

I use a similar homemade system using the tormak holder

@JrFreak300 Жыл бұрын

I'll keep my WE Pro.

@patrickmurray9409 Жыл бұрын

I've used everything, an was told too sharp. Who's that ,my work sharp is the latest an greatest. It'll be replaced with a tormek soon. Walter is the best,still a maker an a user.

@NuManXplore Жыл бұрын

What worksharp tool do you have?

@agentcovert Жыл бұрын

You will cause accelerated wear and tear on your tracking / belt wheels by adjusting the tracking wheel so extreme vs moderate adjustments to the tracking wheel with the added use of the rear motor mount adjustment. with proper adjustment the top tracking wheel needs only moderate adjustments for both forward and reverse directions.. improperly adjusted tracking will have consequences with premature damage..

@jusme8060 11 ай бұрын

I sure wish their customer service would be more helpful when they send a dud...I'm sure they'll bet back to me eventually...maybe??? Do your research fellas.

@tacticalcenter8658 Жыл бұрын

Dont sharpen on belts. Thats just going to burn your edges. Reducing the edge retention, also make them more chippy and make the rc lower.

@jamescampbell9533 Жыл бұрын

I believe I’ll stay with my water stones. Thats not sharpening, that’s grinding.

@thanielxj11 Жыл бұрын

I mean he is sharpening. Whetstones also remove material by grinding it off.

@agentcovert Жыл бұрын

Leather stropping belt may be useful if it stays cool with low rpm..

@jeverettrulz Жыл бұрын

In all fairness, he does "grind" over and over. That said, I'll be sticking with my wicked edge.

@NuManXplore Жыл бұрын

Water stones are abrasives that "grind" as well. They just are non-moving, whereas these abrasives are moving.

@jamescampbell9533 Жыл бұрын

@@NuManXplore they don’t remove nearly as much material. I keep my kitchen knives, most of which are very expensive, extremely sharp, Finished at 6000 grit. Trying to sharpen them on any powered equipment would ruin them in short order.