I can't believe the Rebel Alliance didn't think of using a basebal bat to destroy both Death Stars.

It's pretty crazy that knock-off lego companies know what fans want more than Lego knows

“Don’t forget, this design was stolen from a MOC creator” *proceeds to absolutely roast the design* lol

The hammer is for pounding large plates in, they're included in most Mould King sets. They have a place to push in technic pins as well as a brick separator

If they sold the Death Star as sections that you could collect and then put together to make a complete Death Star then that would be really cool. Each section could be played with individually. It would solve the weight and storage issues.

The sheer joy in Ryan's eyes walking down the stairs was epic! Also nice form on swinging the bat!

He’s not ripping on Lepin lol he’s ripping on the Moc designer without even realizing it😂

I wasn’t expecting “insane knock-off” right as the video started

The MK Star NO Death Planet has to be one of my favorite sets from Mold King Space Battles

I wonder how many times Ryan had to retake that shot to get one when it landed it in tails 😂

What a cinematic finish to this video! The music tied it all together

The best videos Ryan makes are when he buys sets and destroys them

Id love to see this except the panels are hinged from the top, and are just remoable, so the whole top hemisphere removes, not to mention lego would for sure not give this a base due to stability, and it would just rest on the ground by itself which is perfectly fine

I wonder how many times Mandr had to film the coin flip so he got the mold king one

The choice of music before the...dismantling of the knock off was spot on sir,you get a dad nod and a golf clap

MandR: **destroys lego death star** "He's too dangerous to be left alive!"

There was a sparkle in my eyes when he said ‘destroying’

Looking at this build is like witnessing an OSHA violation.

I think if you want panels for a UCS Death Star, they should make the panels something like the ATAT where you can take it off and attach it back on relatively easily. That’s what I think should be done if you want to include scenes from the movies.

This makes me appreciate the stability of lego sets much more

An overhead swing down onto the top I think would look badass Luckily you have that other one

Idk why you elitists hate so much on repros

Small brain: Brick separator. Big brain: Tiny hammer.

The death stars look like they're just flying away....from a giant death star.

I could see it being done, but it needs a lot of refinenent, specially with stability Perhaps with an official model, either half of it is paneled, so you can display either the interior or exterior side, OR they make removing the panels easy, so you can pick if you want it displayed covered or not.

Thanks for the review Ryan, you've encouraged me to buy this thing👍.

Bro has a vilian ark

How come the Mould King Death Star reminds me of an onion?!

You should review the Disney Princess Knockoff Death Star next

When Ryan destroyed that horrendous Death Star it made me think of the old Drop Test videos. RIP Drop Test.

Making great videos while still moving/transporting sets is amazing.

Ahh, yes.. the actual way to destroy a Death Star.. by swinging a bat at it... no need for proton torpedoes, just use a bat. Lol

I feel like Ryan could have just tapped it with his bat and it would have broke even more. 💀

Yo your face when you hit the death star 😂

NOT AGAIN!!! Ryan. How am I going to explain this to the insurance company again?

The music on the walk to the garage and finale! The replay edits! Bravo! 👏🏼👏🏼👏🏼👏🏼

I’m still waiting for the princess star review

I built the lepin (mould king) set and had no issues. It has all the rooms from the movie and a couple extra ones. Great play features, including a chute where you can fall from the detention block into the trash chute! It is a hard build and not for beginners.

An excellent idea would be recreating the Ned Death Star scene from spider man

Lego would do better than the panels with large gaps? You do have every play scale Millennium Falcon before the current version...right? It would probably be better if they had removable panels instead of the ones that fold down. Now, regarding Mould King, copyright issues aside, their sets are usually pretty good. They use "gobricks" brand bricks that are actually really good quality "knock off" bricks. The feel and fit are usually pretty close to Lego and much higher quality than the traditional knock off bricks which are often a slightly harder plastic. This is also why Mould King sets are a little more expensive than other Chinese brand sets, because they use higher quality bricks. I have the Empire over Jedha set from them and it is outstanding (yes I know it's from rebrickable). It looks amazing. The build process was a little tedious with the layered plates, but the end result is absolutely fantastic.

Great video! Especially the end with cinematic finish is hilarious😆

This has to be one of my favorite videos you have done, entertaining review and that ending… cinema

How many takes do you think it took to flip the coin and have it turn up “tails”? 🤔

xD the voice crack when talking about the mini star destroyer "the way that it's attAcHEd"

I would love a lego set where it is a purely display set, of the DS, but with a removable panel that would transform it into the DS2. If there is any other differences other than the non completion, you could include dual option mini builds such as the sequels antenna on the UCS Falcon.

When you started hammering I immediately thought of the elf scene; im so glad you also caught that

Mould king: We will give the people what they want Ryan: And I took that personally

The center section(skeleton) held together pretty good after the bat strike

In "Rouge one" there was a star destroyer crusing away from the deathstar.😊

I think that it would be a good idea if Lego were to make a u.c.s Death Star, that was modular like the Ghost Buster Firehouse. You could take it apart in layers, but still be able to access the interior with removable panels on the side. The different modules would also be accessible through the top.

Help me, what does girth mean when talking about LEGO, I’ve heard that word like 5 times in the past week and I have no idea what it means

I feel like a good work around to access the inside could be done by making the top and bottom panels removable by taking off two separate big pieces, one for the top and one for the bottom, well actually it’d probably have to be two big pieces for the bottom due to the stand holding it up would be in the way, but that’d be far more effective, instead of folding out each panel one by one

I think the interior is pretty nice tbh. Those empty hallways look pretty good, some crates and vechiles would be nice but you van make it yourself

Definitely needs the panels for playability

19:27 that outro was insane with the classic music playing in the background 🥶🧐🗿

If Lego did one like this, the top panels could be lifted off in one go like a lid. Although you probably wouldn’t be able to easily get the bottom half off (unless you can lift out the internals, but then there wouldn’t be enough stability), and would still be too heavy and look bad

I think a Lego Death Star with Panels could work in Micro scale form. Kinda like the Lego Hogwarts with Microfig scale interiors. And the panels come of like the Millennium Falcon where they are hooked on and can be taking off.

Love the video, that outro was 👌cinematic 😅, and great seeing you again at brickworld 😁

Ryan destroying the Death Star in this video dwarfs both of the Death Stars getting destroyed in Episodes IV and VI lol

That bit at the end was hilarious. :D

The destruction part was amazing! Especially with that music.

I think its not cool that every one thinks that "knock of" lego sets are bad. Besides that some alterantive companys are bettee than lego, especially in the price catagory

Love the work ryan . keep it up!

It was amazing to see you at brickworld dude!

Good job getting to the point of contact on that swing

Notice how the sticker looks like the 2nd Death Star not the first Death Star

I honestly think if this was made by pro designers that are actually good at their job+if it was more sturdy and had better over all build quality+ if it was built with legit real lego and if it was a bit smaller this would be the most awesome thing ever

i wonder how - or if at all - it would break, without breaking individual pieces, if you hit it with a bat from the top. maybe its time to do some finite element method and simulate it

That one Death Star is so goofy looking. Even when standing, it wobbles around! Like how after all this time you finally had a way to prove your point!

The HAMMER 🔨 was the hi light for me in this video 😂😂😂

I’ve got an idea for you, create a Death Star hanger mock using only the pieces from this😂😂

MandRs going to be moving out of this house and will still be finding pieces from the Death Star in his garage!

That ending though. That is pure cinema

for removable panels they could try a different approach where it's like two halves of a nutshell

Great vid keep it going

Lol that guy taking cover at 18:45. I would be too haha.

The ending is classic! But, you could’ve just stored it in the garage, like just right there. 😂

The good thing is they give you enough room to add your own interior designs! We always have extra pieces & extra equipment so your imagination can go wild, to set up your own interior.

Way to bring your wrists thru the zone and follow thru with barrel of the bat. Looked like fun

The song used during the destruction is Deme Beni Bagisla

Loved the end. That was a reel good video.

Wow I haven’t seen much of ur videos since u have moved. Looks amazing man!

Classic! Would love to see another destruction but recreating the printer smashing scene from office space movie haha

The panels can open sideways. Just a thought, maybe even open more like double doors. It’s not going to be hard to pull of with a little bit of thought and creativity

Hope he didn't stop the Hoth series

The whole thing wobbling makes me so anxious

Coming from someone who hasn't built either style of LEGO Death Star, what do you think about more of a vertical clamshell design? A finished UCS display on the outside that hinges open to a Master Builder Series interior, a kind of Batcave Shadowbox of sorts. Obviously it'd need on heck of a stand and hinging system, and it wouldn't do anything for the weight problem. But maybe they could somehow modularize the different stories to help if moving it around? But yeah that Mould King was an embarrassment. Nice job smashing!

Ryan just bought a knockoff, for 400 bucks, destroyed it, WHEN HE COULD BUY 20 501st BATTLEPACKS AT 0.05% OFF!!!

Hopefully the vlog will show the destruction of the death star as well and the aftermath of the swong

10:08 I guess this room is supposed to be the command room since that thing you think is Vader's meditation chamber is a command post also seen in the Death Star's command room. Otherwise I also wonder what that room on the left side of the command room is supposed to represent. A shower room? xd Anyone an idea what that could be?

NOOO you could have just gave me that Death Star NOOOO

You should buy all the pieces in real lego and rebuild it with the sacred bricks

18:41 GREAT SHOT, kid, that was one in a million!

With open top, the MK model looks like a (giant) "Protea" flower. So, a design of a covered DS should create a liftable dome (top cover) instead. Another approach could be a rotating dome, with a quarter open (or a window), to reveal section by section when spin around.

Lucille has spoken.

Been waiting for this for SO LONG

Wow! That is so cool. How did you connect to outside to it?

Watching that Death St- *ahem* Death Planet wobble around while you were playing with it was giving me anxiety 🤣🤣 Also that ending was extremely satisfying LOL

Watching that Death Star get destroyed brought me so much joy

i have question why is there no longer videos from hoth moc??