NEW VIDEO!!! Rusty Bread Slicer Restoration kzfaq.info/get/bejne/aq6Kndt-rdebgnU.html&ab_channel=MrRescue

Must be fun to have so many experts in the comments telling you how to do things every time, good work.

Best part is, in addition to seeing the item being restored, which is so much fun, we also get an idea of the internal workings of the gadget. I am hooked on to these restoration videos since past 2-3 days. Really satisfying to watch 👍

Advice from a pizza chef: always have to cooking device heated and ready to go before putting in the pizza, this allows the outside of the dough to cook before the inside, this gives it the crispy crust on the outside and steam to build on the inside, giving you those big bubbles at the crust. Putting the pizza into a cold cooking device will slowly heat up and cook the dough, which is why your pizza didn't have the classic look on the crust and appeared to be really soft, but if that was your goal all along then, no dramas

Of all the restorations I've watched, this is one of the few items I would just LOVE to have. I'm an absolute pizza freak for life, and this little oven is gorgeous!

The glass-scraping reminded me of Baumgartner Restoration’s “Scraping, Scraping, Scraping Or A Slow Descent Into Madness”. Must’ve been painful, but the end result was surely amazing. Props to you!

I could never tell those two pieces ( 19:30 ) were glass. Great work!

This guy’s attention to detail is on a whole different level. Thank you for these videos

This must’ve taken a long time. I have to tell you I’m absolutely impressed. I look forward to seeing other big projects restored like this one. Working electronics is what I like to see restored. And pizzas one of my favorite foods. Very good job!

Its a good restoration, but you should kept the original logo/mark of the oven because we lose the origin of the item... Edit. Or print a new one considering the state of the original. In any case, I repeat that it is a decent restoration :)

22.45 : WOW I never thought it would end up to be shining glass! All is amazing! This not being only professional, but super patient and that's because you extremely love what you're doing. Chapeau.

I love seeing your craftsmanship of reviving the old rusted items and turning them into working beautiful items. Impressed!

We take waffles seriously in our house kzfaq.infoUgkxUfphIgghPSpAXNq6OG2WRYsFVqylcqMn and worked our old one through many years of Sunday brunches till it finally gave out on us. Our old one only made two at a time, this one makes four! Nicely sized 1 inch thick which are lovely! Now the kids don't have to wait as long to eat our weekly waffle breakfast and everyone's are hot if we wait and eat all together! Setting 3 seems to work perfect for golden brown. Be sure to pour the batter in the center of each waffle square, not the center of the iron like the novice that posted the scorched waffles photo. About a 1/4 to 1/3 cup of batter in each seemed to work well for us. We tested making just one at a time so we could use all the remaining batter and it made it just as fluffy and golden as when we made 4!

I hope you burned that a few times before you put Pizza in it and ate it! Also I don't know why you didn't keep the emblem. It would have looked much better with it and it cleaned up really well so I don't know why you didn't use it. Great job enjoyed watching thank you! 😁🇨🇦✌

I would never have guesses that this crusty steel plate is actually a glass pane! Outstanding job getting this clean, and great restoration over all. I'm subscribing

I've been a chef for many years now, spent a lot of time as a pizza chef. I want one of these now, awesome work.

Absolutely wonderful! I love that you followed all the way through, and made a pizza in it! Thank you!

Your videos teach me to have patience with my own projects.

Really great job!! Two tricks to help you on your next project.. Using a glass jar with screw on lid,attach a long bolt through the lid ,fill it with sand,and use it as a tumbler to clean any nuts,bolts and screws using your electric drill to spin it... Second,using "Easy-Off Oven cleaner", will remove that carbon build up instead of having to scrape it with razor!! Just spray on let sit for an hour,and it will wipe off!!! Hope this helps!!!

It’s like watching a magician… those black gloves, the way you hold things up and turn them, and then of course the final product is a magic trick going from trash to a beautiful restored work of art! Watching these videos calms me so much, idk why it’s just relaxing.

It's so saticfying to see something being restored so precizely. Thank you for the content and I can agree on "Thank you for not putting any music over the restoration sounds." And over all the project really caught my interest, as I started working with sourdough on pizza stones recently. :D

Really hope you did an initial burn before you cooked that pizza. Great restoration man!

Keep yourself and your family safe buddy. Test for lead.

I've never seen a pizza cooker like that one. How cool. You did a wonderful job bringing it back to life. Looks amazing now.

Very meticulous and detailed work indeed. No short cuts taken. Love watching this video. Thanks for sharing. Big thanks from Canada 🇨🇦.

No talking, plenty of info, beautiful shots, masterful work. I know I said that again lol

I can hear the screams of my mechanics all the way from America

Brilliant restoration. A tip on pizza cooking if I may, preheat the oven before putting the pizza in.

Legend has it, Dude never takes his Gloves off!!😂😮

14:53 what you are doing with straightening the rim is a forming operation so you should be using a soft mallet (hdpe, rawhide, or wood). When you use the metal hammer you are denting the metal. Forming has a soft hammer and or anvil/backing, forging has a hard hammer and anvil/backing. Just something to keep in mind especially with softer metals. You seem to get this but also remember to place the bend/dent curve down for flattening. You don't need to hit thin metal that hard just multiple light strikes, this give much more control, and lessons the chance of cracking.

The Russian Pelmeni Press was cool for a rack when you first opened it.

One of the few channels that nails the asmr. Doesn't linger on a specific part for too long. No music, the only sound is the restoration process. So nice and genuinely relaxing. And you get to see old things look brand new again. Love this channel 💗

Both the rust removal and the pizza cooking were so satisfying

Love that you showed that it can still be used! So cool!

Excellent restoration! When using, preheat at maximum temperature for about 5 minutes, then place the pizza to bake. I have a similar one, and the manual says to preheat.

what an amazing job. it must be wonderful to have such a gift as you do for restoring stuff. thank you for sharing your gift with us.

It's late, and I almost went to sleep during the sanding in the beginning!! So relaxing. I've been binge watching these videos tonight lol

Excellent restoration, beautiful pizza oven, oh and now I want pizza. Thank you for sharing 👍👍👍👍👍

I think you did a really great job in refurbishing the pizza 🍕 maker. I do wish that you'd kept the original decal/maker's mark on the glass, or fabricated a new one. I still think u did a great job. It is a very cool little piece of nostalgia to see. The reason original maker's should be acknowledged, even if it is you who brings it back to life, is because someone at one time worked hard to create something. It was someone's passion so to speak. All in all, it was a very interesting video to watch. It made me kind of wish I could have been there helping, and learning. Keep at it!

You never fail to impress! Your videos are … satisfaction guaranteed! 🧐🧐you are terribly clever - something so beautiful, seeing once tossed and forgotten items, being so methodically restored, back to their glory days 🤓❤️

the more of stuff like this i watch the more i realize the talent and years it takes to know what to do to each part the cleaning the what to use to get the job done its very relaxing thank you for the share

Your dedication is amazing… so relaxing to watch and listen to. Hopefully it is food safe, glad to watch your content !!

Nice job! Why not keep the name on the glass? Even if it was worn, I think it would have been better with it or if it was repainted.

My grandmother oven for bread.....this reminds me of them and my childhood ....miss my grandparents...

I was honestly hoping you would polish and nickel plate the exterior, matching the art-deco style of the '50s, but the black paint actually worked really well! That pizza looks incredible, by the way! 🤤

I really hope that paint and tape safe to use something that produces that much heat - and something that is being used to prepare food. I don't think I would eat anything you prepare in that oven.

I absolutely love this, mostly because I didn't know there was an oven SPECIFICALLY for pizza!

He's so kind! He first, shows us how it's done. Then, starts to work at his regular speed.

Nothing is hard work restoration when you know what to do and stuff you use to restore. I am amazed!

Mr. R, you've probably heard this before. I stopped using wd40 to loosen bolts a couple decades ago. It's works well as a water displacement when winterizing your boat engine. I only use pb blaster for penetrating oil.

The time consuming, pain staking restoration to that level of detailed perfection is admirable!

Thank you for sharing this restoration. You did a great job.

WHAT AN EXCELLENT MEMORY!!! It's amazing to watch you do this and remember how to put it back together again.

Also, as a tip, file down the end of an old Phillips head screwdriver to shorten the shank, giving better traction in old screws. Usually you only need to file off the very tip. If you look at the points of contact between the driver and the screw, you will see they often make the tips too long.

Ví esto y encontre unos detalles a mejorar la proxima vez (Digo esto por que trabajaba limpiando hornos de pollo y Rational) 1.Los metales que están con grasa carbonizada, en vez de usar la pistola de arena, hubieras untado con soda caustica para comer esa grasa y a la vez todo el oxido. 2.Los vidrios debiste haber sumergido con una solucion de agua a 60°C con un antigrasa fuerte por 10 minutos (Te hubiese ahorrado un montón de tiempo restregandolo) 3.El color negro esta muy bueno. Pero me hubiese gustado ver todos los metales nickelizados para reflejar mejor el calor adentro del horno. 4.Bien ahi con el papel de aluminio, para no escapar el calor. Por todo los demas, buena restauración

You have got a LOT OF PATIENCE! You are definitely an artist. I have never seen anything like this before. I am gobsmacked, buddy! Thanks for the video.

Gonna go look for an old rusty pizza oven, restore it and have pizza for lunch! Great job!

I too thought he was going to re-print the logo, but better to keep it , faded as it was, than just scrape It off! Also, what happened to the second heating element---there were two switches, so shouldn't they BOTH have been replaces?

Great Job! Now to recreate the original logo and put it on, then the pizza oven restoration is complete!

This is awesome. But as a noob, it would be interesting to know why you used so many different ways to remove rust and stuff on the different parts! 😊

You're so skillful & amazingly patient. Great job as usual 👍👍👍👍

Watching the glass get cleaned was very soothing.

Pizza oven, nothing fancy An old masterpiece, but at that time it was useful for the purpose Greetings to you You are an artist in the true sense of the word...

So much finesse! Not too many people on earth are on your level

Я даже не представляла, что существуют многие такие вещи, которые вы реставрируете. Не всегда и не все могут попасть в музей и посмотреть. Картинки, фото, даже видео предмета это совсем не то. А тут можно посмотреть в разобранном виде и даже как функционируют. Даже возникает впечатление что трогаешь, так тщательно вы демонстрируете каждую деталь. Спасибо. Великое чудо Преображения. Феерично. Как же вы интересно живёте! Столько знаете, умеете! Сами радуетесь и тем кто захочет это иметь доставляете огромную радость.

Excelente trabajo primera vez que veo un horno para pizza portátil . Saludos desde Venezuela ciudad de Maracaibo 👍👍👍

Just an awesome restoration through and through bro', seeing the before and after in the end was incredibly satisfying, and that pizza, dang, I wonder if there are pizza makers like this here in the 🇵🇭

Nice traditional electric bread oven you've got there!

The scraping that goes on at 13:00 is just so satisfying!

Beautiful restoration😍, and the pizza looks delicious!🍕😋👍👍

Good job, Too bad for the manufacturer's logo mercilessly erased from the glass XD

The result was absolutely fantastic!

Ahhh. Paint infused pizza. Delicious 🤤

That looked like some raw ass dough at the end.

Really good restoration honestly I didn't think you would get it working I really thought those elements were gone but they work great 👍 👌

best restoration videos are the ones that test the restored device at the end. This was *cheff kiss*

I certainly would have installed an insulated grommet where the electrical cord exits the machine. Mushy looking pizza but, overall a good resto.

Awesome job as always. It's great to keep good items from the landfill

I'd love to see one of these restoration videos with the long intros, where they just throw the rusty garbage into a dumpster 😆 Like, a two minute intro with wide, panning shots and soft piano music.. SLAM! Straight into the bin!

I wish you would’ve put the branding back on the glass or could’ve left it, but I’m sure there’s a reason you didn’t. I just think it keeps a bit of the originality to it. This is gorgeous and I love your videos.

Love the restoration, you are one of the few restorers that actually believe in hand safety. I have seen others that will use razor knives and blades with their bare hands. As a former maintenance supervisor, I really appreciate that. Have you tried using flap wheels instead of sand paper on some of your projects?

Such a pleasure to watch! I've worked in fabrication shops for many years both small and large and I've done some restoration but mostly production and R&D. Great, great job restoring this darling of a pizza oven! Gotta admit tho'... the glass work in the vice.... yikes! =X-D

Insane and amazing work. Loved this one so much

Excellent work. I thoroughly enjoyed this video. Thank you. 👌🏾

So how does spray paint taste like?

At the entrance of the electrical wire to the device, there is a sharp metal edge. It needs a bushing. Nevertheless, great work. Like.

I had no idea that was even glass! Amazing.

Your channel allows me to know items and products that are so rare and unknown to the world. Thanks

This is the first time something like this happened- I was like “why is he using the razor blade on that part? Why not the… oh. It’s because it’s glass”. Legit threw me off I did not expect that caked disaster was glass.

Never seen anything like this, and frankly it looks real neat. Excellent resto job, it looks amazing.

Well, it's official. You did a great job at the restoration AND making me hungry.

I think the main takeaway of this video is that... you know how to make an aesthetically-pleasing pizza!

Nice job, and I couldn't see one so that's the reason I'm mentioning it but considering the whole thing is metal and electrically powered I would put a ground attached to the frame in some way so that if you ever get a frayed wire it doesn't zap you.

29:20 зачем мучиться? В железную банку с песком, плотно закрыть, к банке приспособить шпильку, зажать в шуруповёрт, включить и оставить минут на 10. Они сами блестящие будут и без этого.

Wow- restored...down to the screws. I admire this kind of patience and focus. great video! ps. I love the tiny screwdriver.

Restoring a pizza oven .. doing god's work.

the sandblasting part is probably my favorite. It's something I'd love to do if I ever had the chance.

My biggest question is if the food would be safe to eat? I would think most companies have to use FDA approved paint. If so, what kind of paint did you use for this project?

A awesome restoration. Enjoyed what I saw. 😊

Another banger, love the uploads. Wanna pizza oven like that myself.