The ULTIMATE Transparent Bluetooth iPod Classic with Wireless Charging
Рет қаралды 427,549
2 жыл бұрынChristophers Ebay Seller Page: www.ebay.com.au/usr/pleiadesc...
Original ClearPod Reddit Page: / c_l_e_a_r_p_o_d
Original Bluetooth iPod Guide: • The REAL Perfect Bluet...
iPod Classic Back 3D Model: www.thingiverse.com/thing:497...
iPod Classic Pairing Switch 3D Model: www.thingiverse.com/thing:497...
Q/A
"IsN't YoUr iPoD GoInG tO sHoRt CirCuIt WiTh tHaT BaRe CoPpEr WiRe!?!?": No, the wire is enameled and will not cause any short circuits.
"How Long does the Battery Last?": Expect over a week of continuous playback, approximately 48 hours with the Display turned on.
"How Long does the iPod take to charge wirelessly?": This is dependant on the size of battery in your device, expect it to take upwards of 10 hours with a 3000mah battery. Charging times may vary depending on coil placement.
"Will this work with my Airpods?": Yes, I've tested with my Airpods Pro and AirPods Max, the iPod works just like any other Bluetooth Device.
"I Can't Connect my Bluetooth device to my iPod anymore, what do I do?": You might need to reset your Bluetooth Module. Do this by turning it off, waiting a couple seconds and then switching it to RX mode. Then turn it on and off again, wait a couple more seconds and switch it back to TX mode. (You will need to open your iPod to do this)
"What sort of Bluetooth Range should I expect from my iPod?": Approximately 5-10 Meters using the transparent rear panel.
Wiring Diagram: drive.google.com/drive/folder...
Required Parts and Tools:
Bluetooth Module: www.ebay.com.au/itm/TaoTronic...
Battery: www.ebay.com.au/itm/3000mAh-E...
iFlash Solo: www.iflash.xyz/store/iflash-s...
A button you can use for pairing, I sourced mine from one of these: www.ebay.ca/itm/402211681771?...
Kapton Tape
Electrical Tape
Micro Soldering Equipment
0.26mm Coated Copper Wire
Dremmel (Rotary Cutting Tool)
Hot Glue Gun
Electronic Tool Set
Music Used:
Lights by Sappheiros / sappheirosmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/LightsSappheiros
Music promoted by Audio Library • Lights - Sappheiros (N...
LAKEY INSPIRED - In My Dreams
Download→ / in-my-dreams
Eternity by Kevin MacLeod
Link: incompetech.filmmusic.io/song...
License: creativecommons.org/licenses/b...
Ghost'n'Ghost - Melancholy
Link: www.youtube.com/watch?v=Lov6S...
My Steam: steamcommunity.com/id/Pendleto...
My Steam Community group: steamcommunity.com/groups/Jump...
@Dianexis1 2 жыл бұрын
Congrats! That came out amazing!
@MarkEichin Жыл бұрын
I am impressed at the dedication to preserving the 30pin connector - as someone who still uses the largest 30pin peripheral ever: the 2006 MIni Cooper (not only is there a 30pin connector in the glovebox, but this generation of ipods recognizes it in the firmware :-) (I've never done anything more advanced to the ipod than battery swaps myself...)
@Pendleton115 Жыл бұрын
Don’t underestimate the power of the 30 pin! A very versatile connector for the era.
@politieagent Жыл бұрын
I am impressed that the battery did not blow up when he clipped both wires from the Bluetooth module at the same time 😅
@ayaansworkshop Жыл бұрын
@@Pendleton115hey there I recommend adding MagSafe magnets to the iPod so it will snap on to the right pace every time and it would be cool if it supported the MagSafe accessories! Most importantly you will get that satisfying sound and feel every time you put it on charge
@madetg Жыл бұрын
I want one 😊
@fox.9879 2 ай бұрын
i think my 2012 ford focus beats your mini i've got the biggest accessory.
@J_Squatch Ай бұрын
This looks incredible. If the iPod were to be re-released now, I hope it'd look half as good as this. The touch wheel and charger especially are so wild to see. Truly stunning.
@CatGPT_ 3 ай бұрын
the music is so fitting. i felt like i was performing a heist with you.
@mime987 Жыл бұрын
Incredible is all I have to say. The idea of having an iPod classic like this one and being able to listen to all your favorite old tunes on your existing wireless headphones is too exciting to even think about. Not to mention coming back home after a long day and tossing the iPod on your wireless charging station… simply beautiful
@123benley 11 күн бұрын
You know the work with HD650 wired now that's great. Also without having to go through the soldering there's also moonlit market iPod USB c charging BT and 2000mah battery but not cheap but cheaper than 3d printers
@adetoye50 2 жыл бұрын
I am just seeing this after Two Months; in one of my comments on this channel, I said, "These upcoming engineers will take iPod Classic to the next level, and it will not die off." Now I am CORRECT. Congratulations on this project; I am thrilled. My health has been so poor, and that's why you've not heard from me. I wish you a very Merry Christmas and a prosperous New Year in advance. Bless You, and once again, CONGRATULATIONS ON THIS PROJECT.
@RicardoJunqueira 9 ай бұрын
It ended up looking amazing. Kinda futuristic. Congrats!
@seraphel4183 2 жыл бұрын
That iPod looks absolutely incredible! I love the wireless charging! You have inspired me sir! Whether I win or not, I plan to do the following mods… I have two 5th gen iPods and I plan to do the Bluetooth mod, the transparent case, transparent click wheel, new battery, new screen, and after seeing how well your iPod came out, I also would like to attempt to add wireless charging and I will paint the battery and the frame as well. For the second 5th gen iPod I plan to replace the case with a new one that retains the original look. I will of course upgrade the battery, add Bluetooth, and replace the screen and click wheel. I also have an iPod Hi-Fi and a 20” iMac G4 that I would love to pair these iPods up with! Thanks for the great video, I’m looking forward to seeing your future projects!
@Pendleton115 2 жыл бұрын
Congratulations Mate! You’ve been selected as a winner! Please provide me with your twitter username (If you have one) and I will send you a private message so we can discuss shipping details. If not please provide me with an alternate way of contacting you that you are comfortable with posting on here. Look forward to hearing from you!
@seraphel4183 2 жыл бұрын
@@Pendleton115 It doesn’t look like KZfaq is posting my replies. Strange.
@Pendleton115 2 жыл бұрын
@@seraphel4183 Peculiar, please send an email to wheatleythecore801@gmail.com and we can try to discuss things that way.
@mrcyborg9216 11 ай бұрын
@@Pendleton115did he get the iPod?
@Fuze.Kitsune Жыл бұрын
I would not be surprised if he somehow was able to give the ipod wireless access to iTunes. It's amazing to see how a relatively old electronic device can be retrofitted with new parts to give it new life and functionality. Amazing 💪
@asdzx1757 2 жыл бұрын
Youre onto something. This format works, and you have a soothing charisma. Keep at it, my dude.
@breadring 10 ай бұрын
That's an epic build, must have been a lot of time put in to it to achieve the end result, something to be proud of.
@robertforgets 2 жыл бұрын
The hold switch toggle is genius! Thanks for the awesome video. I’m about to start working on a fifth and “seventh” gen classic. Great work! Very inspirational.
@brandonrobinson1603 Жыл бұрын
Wowww this is so sick! I loved my iPod Classic forever. Still have it and it still works- I love what you've done with yours!
@therealgaragegirls 2 жыл бұрын
That is seriously THE ultimate iPod Classic. I may copy this project of yours in the future for my own 5.5 80GB iPod.
@Joaquin77 Жыл бұрын
Wow it looks really nice!! I can imagine the satisfaction feeling after making it happen.
@omfg823 2 жыл бұрын
Thanks for the reply to my earlier comment! You did a great job with the clear back on this one. My Bluetooth mod is still flakey, but I think the clear resin back would help reception massively.
@WhosJmcGames 3 ай бұрын
I was just debating getting a modded iPod with type C. I didn't even count the fact that I'd lose all access to accessories. You saved me, thanks!
@Malkielosaurus 2 жыл бұрын
Beautiful work, very detailed and smooth. Congrats!
@BaRT3234 Жыл бұрын
This video has inspired me to do mods of my own. I have to start off by removing the old spinning disk in my classic and replacing it with flash memory and maybe try the Bluetooth mod. Well, lets see how it goes.
@Senna-xi1gr Жыл бұрын
This is absolutely fantastic. Well done to your dedication to detail. 👍🏆. I am running an old classic iPod still in 2023 with no issues apart from it would benefit from a new battery. Love the clear cover.
@bencorrell 4 ай бұрын
I love the DankPods cameo at 1:08 haha
@rafaelcarmona4461 Жыл бұрын
THIS WAS AN ABSOLUTELY PHENOMENAL JOB SIR!!! Thank you so much for Posting and sharing.
@marshalwilliamson3977 Жыл бұрын
I plan on doing a Bluetooth mod larger batt and upgrade the hdd to flash on mine. Your videos have been a blast to watch! Keep up the good work
@RATTU5_ Жыл бұрын
this has to be the most beautiful yet sketchiest ipod video I have ever watched and I love it
@MrButtonpresser 5 ай бұрын
I love my old iPod classics, both upgraded to hold iFlash drives. The Bluetooth option is brilliant, I’m Ok with wired charging. Good job.
@reedfish99 11 ай бұрын
Excellent work my friend! What an ultimate and epic iPod 5! Love it
@heyimclancy Жыл бұрын
Awesome video thanks for sharing mate, love doing hobby tech and was just browsing KZfaq wondering what mods had been done to the classics (was aware of storage/battery increasements) but to see Bluetooth and wireless added it's quite inspiring. Keen to have a crack myself, going to start with an 80gb iPod 5.5 due to the DAC, going to first do the battery and storage then seal it back up, with the intent of added Bluetooth/wireless when my skills permit Thanks again for taking the time to make the video, it was very easy to follow
@Pendleton115 Жыл бұрын
Really appreciate the feedback. I’m glad I could be of inspiration to you :)
@DavidObando 2 жыл бұрын
I’m definitely doing the bluetooth mod to my iPod. Thanks for the instructional video!
@a00512098 2 жыл бұрын
Looks great. The Bluetooth module is definitely a great addition to the iPod. Been thinking about adding rockbox to mine
@hyunnie9983 2 жыл бұрын
The main mods I plan to do with the board from my 7th gen lying around would be to make an ipod that has a nice colour scheme (maybe black front plate with a yellow clickwheel) with a huge battery and storage size. I understand why iFlash boards are so useful but I find the HDDs fun too. The little noise they make and the feeling of movement in them really differenciates them from other MP3 players of the time. Anyway, very fun video, I really like the wireless charging aspect especially. Means you could realistically have a wireless charger in your bag to charge all your devices!
@TheCharlesVilleneuve Жыл бұрын
that's absolutely gorgeous congrats!!
@brandonl1052 8 ай бұрын
You're a truly smart person. Mu h respect to your dedication to learning everything it took to achieve this. Nice work!
@FujitheChef 2 жыл бұрын
Definitely planning on doing the Bluetooth mod. Brilliant project!
@samsungs20ultra81 Жыл бұрын
That’ll be one and only transparent ipod in the world, what a satisfying feeling after it works perfectly and also looks damned 👍
@GrimFeeling Жыл бұрын
Absolutely beautiful. I’ve swapped out the battery on mine but this is next level. Super impressive
@adrian_orozco 2 жыл бұрын
Amazing video! "delicately remove the battery" **CHOP** 😂 I'm going to mod my iPod by adding one of those iFlash cards, larger battery, and picking up a blue faceplate from EOE! The clear back would be amazing!!!
@-retro-kid-2610 2 жыл бұрын
Amazing build. I have done flash upgrades but plan to do a Bluetooth mod next. Now I’m wondering if I shouldn’t go all out and do a wireless charging one. You have truly inspired me. If I don’t win a back any ideas of the best place to get one? Have you thought about selling these? Or kits?
@chriscasillas 2 жыл бұрын
That is seriously impressive. What a cool device!
@andi_youtube_ Жыл бұрын
Adding magsafe would be incredible 😍 amazing built! 👍🏻
@workinprogress9483 Жыл бұрын
this is insane, you are a master solderer!
@sa6438 Жыл бұрын
I really like the hard drives under the yamaha amplifier xD! Good job!
@Voigt_Analytics Жыл бұрын
My respect! I myself come from the FabLab/Maker community with an engineering background. This is a really great project and makes the old iPod a current companion. Only the software might need some tweaks. For the sweepstakes, I'm unfortunately 1 year too late 😭.
@jonroe8070 2 жыл бұрын
That looks very clean good job. I would like to do a build for maximum battery life
@humorss 4 ай бұрын
great soldering job and clean internals.
@bumpee978 Жыл бұрын
Dude the soldering to tiny pads is rediculous! I wish I could do this but it's far beyond my skill level. Great work.
@marvin81666 10 ай бұрын
Nice work very smooth result
@bm1518 Жыл бұрын
Great video. I need to upgrade my iPod with a solid state and one of those clear cases
@ShiaMajer 3 ай бұрын
Wow this is so sick, love how it turns out!
@JohnSmith-sd7os Жыл бұрын
Congrats! The iPod looks great.
@d2thbyretaliation 4 ай бұрын
Cool iPod. Congrats man!
@JustAKaveMan Жыл бұрын
Came out awesome! Definitely wanna do the Bluetooth mod!
@efsaneseksenler9731 Жыл бұрын
Wow perfect work!! Congra my friend! ✌️😍
@sharnakeable 2 жыл бұрын
THAT'S INSANE DUDE AND I LOVED IT!
@LAUGHINGMANWILL 2 жыл бұрын
I like what you did with the frame. My clearpod prototype has no frame. Wasn't any room for it. Great video as usual
@Adriel_1212 Ай бұрын
Hello I just watched your incredible video and was amazed the whole time. 🙌🏻 I wish I could do the same and had an iPod Classic 5.5 exactly like that. The end result just looked incredible. 🤩😍
@pmld1000 Жыл бұрын
I love this! I've still got my 1st gen iPod I bought with my first Coles paycheques doing nightfill :D I would love to give it a second life with the Bluetooth and SD card mod.
@studytoreachsuccess 2 жыл бұрын
So marvelous, congrats and hats off 🤩✨👍
@azrul001 Жыл бұрын
I would definitely add lights to the case. Amazing mod and I love it!🎉❤
@axellucas47 2 жыл бұрын
Thanks for this video and your previous one, they are brilliant! I copied your design but had to use a different Bluetooth module and a reed switch as I kept messing up with the glue gun and push switch due to fat fingers. I was debating doing another one with USB-C charging so thanks very much for this video you have saved me lots of hassle as I'll use Qi instead.
@M1goblin 7 ай бұрын
how did you use a reed switch, I'm about to try doing one of these mods
@zerocks88 Жыл бұрын
awesome idea using the hold switch as a button!
@donutdealer74 Жыл бұрын
I love it. I’m not savvy on customizing my stuff like that. I would definitely pay or buy one for myself.
@merterdir 6 ай бұрын
Amazing build
@FaresPartyVid 2 ай бұрын
Amazing work !
@HighlightReel 2 жыл бұрын
Great stuff. Just wonderful work.
@joshuadathsbc5765 Жыл бұрын
Awesome build
@saurabhkulkarni8854 2 жыл бұрын
Amazing project man.. I’d love to flash mod mine some day but probably won’t because parts or shipping aren’t cheap here and neither are iPods, even used ones. But an iPod with wireless charging, proper Bluetooth controls (at least hardware wise) and a huge battery is like the perfect combo.
@DonCachoro Жыл бұрын
I need to find someone that can transform my old iPod to a new one like this. Nice.
@hsnkrdy Жыл бұрын
Thats just great, amazing work. Now you just need to add the circular magnet-array (can be found everywhere) for it to line up properly when you place it on a magsafe charger
@ryou4me 11 ай бұрын
Does anyone know if there is space to add magnets inside the thick case to align with MagSafe chargers? Thanks
@j-mcharing1851 Жыл бұрын
Well done, loved how the upgrades turned out. Any chance you could put together a project kit for those who would like to do this themselves?
@JoeByrds 2 жыл бұрын
That’s a beaut. Nice work!
@BillSands2112 Жыл бұрын
Wow that was so sweet, i do have to try to donmine now..kudos to you Sir
@srmiii90 2 жыл бұрын
Been looking into making a flash ipod for awhile, that clickwheel really makes it.
@willm5032 4 ай бұрын
Love this, looks super clean! I am a big fan of transparent gadgets. I've got a 5th gen I want to flash mod and maybe battery replace, which is far as I'll go with it but it's fascinating to see how far you can push these old ipods! Definitely a relic of apple's golden era of design.
@tosa_juku_austria 2 жыл бұрын
holy mother of ipods, this goes deep, really good stuff
@Plymouthmusicschool 10 ай бұрын
This is wizardry to me...amazing
@AntiqueFlop 2 жыл бұрын
As an apple fan, after finding your channel I’ve got really motivated to start modding/fixing retro apple tech. I’m a bit overwhelmed though, as I study computer science but am not really familiar with hardware repair/electronics etc. What would you suggest that beginners like myself do?
@Pendleton115 2 жыл бұрын
Hey man, great to hear you’re interesting in getting Into older tech! Honestly, the best way to start is to dive right in, find a device you’re interested and learn how to work it! There are plenty of great places online with similar minded people that will happily help you if you get stuck. LowEndMac on Facebook comes to mind. Best of luck in your tinkering journey!
@AntiqueFlop 2 жыл бұрын
@@Pendleton115 thanks a lot mate, can’t wait to see more videos from you!
@pkf4124 Жыл бұрын
Always loved the classic design, even when it wasn’t the classic. My 80gig is in use everyday and never seems to fail. The battery is far from great but it lives in its dock so this doesn’t matter. Its 120GB sibling has had a bad harddrive for years and is just begging to have modifications like this. After-all 120gb is so small these days :)
@aldohermoza9370 Жыл бұрын
120gb for music its not small, thats a huge library .
@Funkteon Жыл бұрын
Someone should make a wireless charging case for the iPod 5.5 and the final 7th gen. It would have a 3,000mAh battery built into it along with the Qi wireless coil and a Bluetooth module. A case like this would add around 15mm to the bottom and around 15mm to the top of the iPod to account for the 30-pin plug at the bottom and the electronics for the Bluetooth module plugged into the 3.5mm jack at the top of the iPod - and maybe 2-3mm on each side... It would be a great option for the folks who want to breathe more life into their old iPod but aren't brave enough to do the SSD and battery mods us geeky folk have done, and it also adds the functionality of Qi and BT...
@MaximzM 11 ай бұрын
holy dangggg this is amazing, i wish i had one of these. i would do this myself but i dont trust myself doing that type of modding hahah regardless this is amazing hats off to you.
@mRibbons Жыл бұрын
I'm not gonna watch the whole thing, but I just wanna say that thing looks awesome. Grats!
@joepGrey 2 жыл бұрын
this is awesome! i'd like to do this one day..
@PerryCox818 5 ай бұрын
Wow, what an amazing job ! :)
@austinlawrence8477 2 ай бұрын
That era of Yamaha natural sound receivers rocks.
@Pendleton115 2 ай бұрын
It’s an awesome receiver!
@mvputten10 2 жыл бұрын
I’m planning to do the Bluetooth mod on my 5th gen classic. That would be a really nice feature to have of course. Still have to find the courage to do it! I’ve already flash modded my iPod and have also put a big battery in it.
@edison4eva Жыл бұрын
If I win an Ipod, I will upgrade the storage to it's highest and blast music non stop, the right old school way! :) Great vid btw!
@LotusFlowerrr 9 ай бұрын
Brilliant, mate!
@UnbrandedCompliant 3 ай бұрын
RAD! Nice work my man!
@zniesmaczony 2 жыл бұрын
I'm about to restore and modify a broken iPod, however unfortunately I I don't have either skills or equipment to do this kind of magic you did and will just replace the broken parts and switch the housing into transparent. It's great to see however, that the good old iPod can be modified this well. An elegant player for a more civilized age ;) Stunning!
@Soundbrigade Ай бұрын
Have started to refurbish/enhance my iPod by adding a SSD, new battery and a new front/back cover. Also, I started looking for iPod docking stations and also couldn’t find my 30-pin cable. I have 4 docking stations, two installed on two tube amps and two spare, but the ones I found on eBay and AliExpress are EXPENSIVE. I bought mine for a few bucks each while the ones I found was like $30~40. Also I found a cable in a local phone shop - $40😱😱😱😱😱 Got one on-line, but still $10.
@ChocoMint_Ch. 2 жыл бұрын
I want to turn my ipod 5th generation to a Bluetooth ipod! I love your video! Subscribed!
@christophsuess7646 Жыл бұрын
Very nice mod! Thank you!
@Hunter-xc9yq 11 ай бұрын
Looks amazing I wanna try it now! Question though, where did you get your wireless charging board and coil?
@kukuhkartikodani1437 Жыл бұрын
such a cool work. classic yet futuristic. I hope i won that clear ipod. will mod that to work with cf card, so the storage become huge
@timothygutierrez742 2 жыл бұрын
I love your videos there so good
@spunkyxno Жыл бұрын
That's crazy! So cool!
@Jbs116 3 ай бұрын
Wow, this is literally every iPod mod needed to keep this piece of tech relevant today. However, do you think it’s possible to mod an illuminating click wheel, so it looks cool inside a car?
@jonathanphelps7246 Жыл бұрын
Congratulations on the awesome build, I'd throw in USBC since I have no ipod accessories and maybe mill out a space for a colored glass insert instead of the resin back.
@pickelsvonbrine Жыл бұрын
This is some cool stuff!
@ra1npod 2 жыл бұрын
Amazing video man! Would have been cool to add magnets like the new iPhones so it could technically have MagSafe but besides that amazing video man!
@walt3287 Жыл бұрын
This lil mug is Loaded 😂😂 I want to build one now lol
@arielvargas2446 Жыл бұрын
It's been a while, but I wanted to write and tell you that without your videos I would not have been able to complete my custom iPod today. Seriously, thanks. After a ton of trial and error, I was finally able to build a 7th gen iPod Classic with Bluetooth, a 1 TB storage, and a 3800 mah battery. I tried for months to build one that included wireless charging on the 7th gen iPod, but I just couldn't figure it out. Maybe you could make a video for the iPod 7th gen but with a USB-C port and Bluetooth, or heck, just make it shoot lasers! 😂Regardless, I am grateful for your tutorial videos and I hope to see more videos from you soon! Happy Holidays!
@Pendleton115 Жыл бұрын
Thanks for the kind words! I’ve also attempted wireless charging on the 7th generation iPod. Unfortunately it doesn’t appear to be possible without some additional hardware, as the 7th Gen seems to check for signal data on the data pins before it will initiate charging, unlike the 5th generation which will just charge as soon as it gets 5v.
@arielvargas2446 Жыл бұрын
@@Pendleton115 Ah! That explains so much! I ruined so many 7th gen logic boards trying to figure it out that it isn't even funny. Still, thank you for helping me this far and for responding to my messages. Happy Holidays! 😇
Veronica Explains
Рет қаралды 144 М.
Hugh Jeffreys
Рет қаралды 836 М.
Guy Dupont
Рет қаралды 859 М.
Photographer Army
Рет қаралды 7 МЛН