The Ultimate TWO STROKE Engine Rebuild - RM 125
Рет қаралды 57,816
4 жыл бұрынFollow along with me as I build this 2001 RM 125 for Cameron Niemela's #TEAMPRYME Team Pryme bike build contest! This will cover the whole build series, not just the minute long before/during/after videos. I think we've got a good chance at winning this thing. If you like what you see, don't forget to VOTE for me when voting opens in MAY!
NYLON BRUSH DRILL ATTACHMENT:
amzn.to/2Rys5zW
COMMENT below what you would like to see me do with this thing!
Like this video and SUBSCRIBE!
Check out my KTM build series that I made a profit of $1000!
• How To Flip Dirt Bikes...
• How To Flip Dirt Bikes...
• How To Flip Dirt Bikes...
• How To Flip Dirt Bikes...
• How To Flip Dirt Bikes...
• How To Flip Dirt Bikes...
Cameron's KZfaq Channel:
/ hondaxrs85
Contest Information:
www.prymemx.com/products/team...
OTHER PRODUCTS I USE IN MY VIDEOS:
Locking tweezers/pliers - amzn.to/2xrasvf
Razor blade scraper - amzn.to/2Vs6iep
Simple Green - amzn.to/3b7JsPV
Mag Wheel cleaner - amzn.to/3ejfTNg
Wire wheels - amzn.to/2XA8hQS
Mini scotch brite wheels - amzn.to/2V9ykN7
Maxima grease - amzn.to/3b8YpRJ
Stay tuned for Part 5!
@fosterkatchen7010 4 жыл бұрын
This channel is getting better and better every video! I can totally see this channel blowing up someday
@MattBerger02 4 жыл бұрын
I appreciate that man, thank you!
@fosterkatchen7010 4 жыл бұрын
Matt Berger no problem. Keep doing what you are doing and I will always stick around 👍🏻
@teejayandmarissa 3 жыл бұрын
Hey Matt , where did you get the vent lines for the carburetor?
@scottnilsen7285 3 жыл бұрын
I’d have agree keep up the good n pump some content love em
@jakubnemec1637 3 жыл бұрын
this is so satisfying to watch, im so happy i found you
@toreg 3 жыл бұрын
My dad used to lay the bearings in the freezer before installing. I have added heating the cases, they just slip in there. Nice job, I am enjoying these videos!
@TimCutugno-zk5pz Жыл бұрын
The little finishing touches fresh bolts new fuel breather hoses make all the difference. Great video mate.
@andrewjoseph1766 4 жыл бұрын
This was a really great video. Mad props man.
@MattBerger02 4 жыл бұрын
I appreciate it
@joshuasheppard758 3 жыл бұрын
You do great work sir. Love the videos!
@wandalawhern1033 4 жыл бұрын
Clean motor build man! Can't wait to hear it rip!
@MattBerger02 4 жыл бұрын
Haha thanks, me too!
@JBFromThe3 4 жыл бұрын
very toughhh🥵😍from this you definitely help give me an idea of how easy it the rebuild is
@MattBerger02 4 жыл бұрын
It is easy! Just take your time and watch KZfaq videos!
@christiancrash 4 жыл бұрын
Looking sick! Good luck with the contest!
@MattBerger02 4 жыл бұрын
Thank you!
@terrimeiss4213 Жыл бұрын
Awesome job!
@ntd.1760 3 жыл бұрын
So grateful for this channel learning allot 😁
@MattBerger02 3 жыл бұрын
Happy to hear that!
@drcrzzy5957 Жыл бұрын
This will help alot with my suzuki rmx project
@MarcosSilva-eo8es 4 жыл бұрын
Its coming along pretty damn clean
@MattBerger02 4 жыл бұрын
I'd say so lol thanks man!
@jex8046 3 жыл бұрын
LIT!!!
@Mr410sg 4 жыл бұрын
Build is looking great, I just picked up a 97 CR125R to rebuild
@MattBerger02 4 жыл бұрын
Thanks, good luck!!!
@JourdonGulick 4 жыл бұрын
Everything vapor blasted looks amazing. At the moment I just polish everything I can with a dremel and buffing wheel. Still looks good, but definitely a step below that vapor blasting.
@MattBerger02 4 жыл бұрын
Yeah I honestly wasn't even planning on getting anything vapor blasted, but a buddy said he'd give it go for cheap, so I went for it. I think I would do it again and pay someone full price for the time savings alone lol
@liampresswood6231 3 жыл бұрын
How do you get them to stay looking like that though once the bike is being ridden?
@mixonmachines 4 жыл бұрын
Bike is looking great 👍 lovin the channel too.
@MattBerger02 4 жыл бұрын
Thanks!
@bertabogs6370 4 жыл бұрын
Very good job keeping it stock
@MattBerger02 4 жыл бұрын
I love a good stock/clean look
@bertabogs6370 4 жыл бұрын
Matt Berger me too
@JoyronLP 3 жыл бұрын
Great content man! Were the sealing surfaces covered during vapor blasting? Couldn't tell from the video. Awesome job👍💯
@hesleyussene4535 3 жыл бұрын
I love so much your channel 💯
@MattBerger02 3 жыл бұрын
Thank you!!!
@baenne Жыл бұрын
HEY, very cool video! well done! one question, where did you find the manual to download?
@Lucky80Three Жыл бұрын
Rebuilding my RM 125 bike…exactly what I was looking for 😭
@motocaleb7508 3 жыл бұрын
I love how you reuse what you can instead of buying new
@tomatoknuckles 4 жыл бұрын
Damn dude that looks fresh as f👌
@MattBerger02 4 жыл бұрын
Wait till you see the rest of the bike...
@tomatoknuckles 4 жыл бұрын
@@MattBerger02 Looking forward to it 🤙
@hesleyussene4535 3 жыл бұрын
Top man
@MattBerger02 3 жыл бұрын
Appreciate it!
@joshr188 2 жыл бұрын
Okay, I see youre from Akron area. I am also from the area. Id like to know who youre using for powdercoating, annodizing, vapor blasting, etc. Im working on a kx250f rebuild.
@mikehayes2975 2 жыл бұрын
do you have a link to the Honda OEM carb vent tubing? i'm having a hard time locating it.
@f1hotrod527 3 жыл бұрын
Powder coating on the covers looks awesome.
@MattBerger02 2 жыл бұрын
I know, they turned out so good!
@lilbreadstick1130 2 жыл бұрын
can u give ma a link to the carb hose i really need them and i cant find the right one
@ratherfilmproductions872 3 жыл бұрын
Where did you learn how to rebuild engines this is so inspiring, I do body work but I want to get into rebuilding bikes and quads sooo bad
@thelifeofapeterson9981 Жыл бұрын
How do you know what to torque certain bolts down to ?
@MurphyZR-ei9rw 8 ай бұрын
Nice vapor blasting how can I do that?
@whip4774 3 жыл бұрын
yo matt what is the diamter for the carb hoses
@ruielias6382 3 жыл бұрын
Why you dont use the tools to instal the engine case? And why you dont use assembly lube?
@joelandis6734 7 ай бұрын
What is a motor rebuild like you did cost Material and labor
@spacityangler 3 ай бұрын
What size hone did u use?
@bigggdongj 10 ай бұрын
need more bike flips
@nevinrhea9742 3 жыл бұрын
Man I wish my wife would let me do something like this.......F it ima do it anyways!!! Love your videos!
@MattBerger02 3 жыл бұрын
Do it!!!! haha
@brainstain22 Жыл бұрын
I've never had a problem with namura pistons either. Actually they seem to last longer than je pistons for me. All the bikes I've put namura pistons in still run...lol.
@uni3831 4 жыл бұрын
looks mint! whered you get it vapor blasted?
@MattBerger02 4 жыл бұрын
A buddy who works at a local collision repair shop did it!
@coreysteady 2 жыл бұрын
honestly wish there was someone around me who would rebuild my bike to this quality and i just pay them for there time
@nicoperalta4160 4 жыл бұрын
everyone hear gonna watch this guy blow up. great content.
@MattBerger02 4 жыл бұрын
Means a lot. Thanks!
@vasseurvalentin8606 3 жыл бұрын
do you have the serial number for the oem pink hoses?
@MattBerger02 3 жыл бұрын
Let me do some looking and I'll let you know!
@vojtechbilek1044 3 жыл бұрын
I am not able to ride or rebuild a dirt bike because I am too young but still I love to watch these videos
@MattBerger02 3 жыл бұрын
One day!
@jasonalicea5786 4 жыл бұрын
Got the same bike year and all want to see what u got going on
@MattBerger02 4 жыл бұрын
Get ready for the next video then...
@maxlaisson1771 4 жыл бұрын
Sou Do Brasil E Tenho uma Dessa Aii
@HooligansMx Жыл бұрын
Heat the cases FREEZE the bearings
@jaymarshall2108 4 жыл бұрын
How long did the ktm take to rebuild
@MattBerger02 4 жыл бұрын
About 2 months
@Land1988 Жыл бұрын
Eny one got a barrel for a 2000 model for sale plz help me
@rossmcclure5618 10 ай бұрын
I came here to figure out what’s the deal with water pump. My engine is a 1999 and water pump is not externally serviceable. Gotta split cases
@ushad 2 жыл бұрын
what torques wrench do you use?
@MattBerger02 2 жыл бұрын
Believe it or not, I use Harbor Freight... I've done a bunch of research and they work very well for me.
@ushad 2 жыл бұрын
@@MattBerger02 forsure, been rewatching all your old rebuild videos. It would be awesome if you could do a buyers guide when negotiating for dirt bikes. The summers coming up and i'm really wanting to pick up an 01 cr125r.
@whip4774 2 жыл бұрын
does it matter the order for the clutch
@MattBerger02 2 жыл бұрын
It must follow the correct order of steel/fiber plates. But in most cases, the direction of the plates don't matter
@robertwoods2505 3 жыл бұрын
Looks good man. Wanted to call you out for not using a crank puller but you redeemed yourself by using a Motion Pro special wrench on your cylinder base nuts (most just use a wrench and don't torque them) so I decided to give you a break...lol J/K
@MattBerger02 3 жыл бұрын
Haha I've honestly never used or felt like a need to use a crank puller. I do use that cylinder wrench all the time, just gotta make sure to do the moment calculations beforehand to get the torque numbers converted!
@runkstefan9750 3 жыл бұрын
How do you not have more subscribers??
@MattBerger02 3 жыл бұрын
Takes time to grow! I'm going to keep putting out content and see where it takes me!
@runkstefan9750 3 жыл бұрын
@@MattBerger02 I will be with you all the way to the top keep up the great content and never give up 👍
@gian2456 3 жыл бұрын
Guys can u write me a online market for suzuki?
@andrewream5279 4 жыл бұрын
Why wouldn't you of put new lower end bearing's in if you already have the case split open and torn apart. Still good I would of still replaced them and kept the old ones as back up's.
@MattBerger02 4 жыл бұрын
Money. Would have been over $100 just in those bearings. This is still a bike I am planning on flipping and making a profit on, so I couldn't do everything. After inspecting the bearings, they all checked out good so I made the decision to reuse them.
@andrewream5279 4 жыл бұрын
Fair enough.
@vinnie_.11 3 жыл бұрын
The piston you got is ok but wisco pistons are way better and not to expensive
@MattBerger02 3 жыл бұрын
I've personally never had issues with Namura pistons, but from now on I will be using ProX and Wiseco pistons. It's worth the extra $25 to have that piece of mind!
@vinnie_.11 3 жыл бұрын
Yeah pro x are pretty good to and im loving these vids keep it up👍
@heckenzwirn 9 ай бұрын
When I saw you hitting the ball bearings with the hammer, I turned it off
@jeffreyatkin7033 Жыл бұрын
Freeze your bearings bro
@ha11iday95 Жыл бұрын
Why freeze Jeffrey?
@maxlaisson1771 4 жыл бұрын
Manda Te WhatsApp
LUND MX
Рет қаралды 60 М.
Евгений Евневич
Рет қаралды 676 М.