The Wildest Iron Trap Hot Rod Build Is Starting

The Wildest Iron Trap Hot Rod Build Is Starting - 1933 Ford 3 Window Coupe

Рет қаралды 66,151

2 жыл бұрын

Last week we received a call from Ronnie Roadster about the Blown Ardun that he is building for Matt. With speed week finished, and other engines finished up, Matt's engine is next on the list.
We weren't exactly sure what project we were going to work on next, since we have a few to choose from, but Ronnie helped us pick. Matt and Steve picked the body off the frame and stashed it under the DeLorean Roadster until it is needed. Matt then walks us through some of the plans for the build, and we take a closer look at the frame now that it has been sand blasted. We hope to have the body bolted back on by spring!!
- Get 10% Off Your Eastwood Order With The Coupon Code ITG15 At Checkout * Some Products Excluded -
- Eastwood Contour SCT - www.eastwood.com/eastwood-con...
Wanna send us something?
Iron Trap Garage
PO Box 6
New Berlinville, PA
19545
Amazon Wishlist - www.amazon.com/hz/wishlist/ls...
Matt's Instagram - @irontrap - / irontrap
Mike's Instagram - @mhammsteak - / mhammsteak
Iron Trap Parts Instagram - @irontrapfinds - / irontrapfinds
Iron Trap eBay - www.ebay.com/usr/irontrapgarage/
Email us - irontrapgarage@gmail.com
Get Your Iron Trap Merch Here - irontrapgarage.bigcartel.com

Пікірлер: 112

@Ecosse57 2 жыл бұрын

"The Wildest Iron Trap Hot Rod Build Is Starting" Sweetheart Roadster weeps in the corner...

@reijerlincoln 2 жыл бұрын

Bonus points for Beavis showing up.

@CarterAutoRestyling 2 жыл бұрын

That's going to be an awesome hot rod! I guess it pays to still check newspaper ads, it's hard to believe that as little as 15 years ago the classifieds were full of cars for sale and you actually had to go look at the car to see if it was any good. Today it's impossible to sell a vehicle without 50 high resolution photos, a detailed description and two weeks of texting back and forth.

@MartsGarage 2 жыл бұрын

A good start Matt. The thing to beware of, though, is there is no "give" in a tube axle. Running a tube axle with split bones can create a lot of stress. No problem with a beam, but not a good idea with a tube. That yard looks like a great [place to get material from. I will follow this one with interest. All the best. Mart in England.

@michaelguinn5736 2 жыл бұрын

Morning Matt, this is the build I've been waiting for!!!......be safe, God Bless!!

@slowshop 2 жыл бұрын

Wild builds are the best! I'll just get me some coffee. ☕

@chuckster6513 2 жыл бұрын

Hey Matt, Mike Good to see work starting for real on this Coupe. With the engine, trans and quick change going into this car it is gonna be almost a dream Hot Rod for many of your fans. Please keep us updated on a regular basis with this build. Work Safe, Be well

@danothemano1 2 жыл бұрын

It’s about damn time Matt! I’ve been waiting for this one since you brought it home. Can’t wait to see the Ardun in it

@user-ip5dm6jf8k 4 ай бұрын

It has to have a flathead!

@byronbassett7439 9 ай бұрын

Hi from Launceston Tasmania Australia, I enjoy your video's, keep them coming

@tommytompley4950 2 жыл бұрын

My dad built his 34 3widow, chopped/channelled/33grill,big block mercury engine, motorcycle tires on front, reverse rims from a big mercury car, rumble seat welded shut,& straight pipes through the trunk sticking out of the rumble seat area pointing to the sky 👍😎👍

@rickjansen58 2 жыл бұрын

Kool Beans...

@1954shadow 2 жыл бұрын

Started watching your channel, last winter when you were doing the coupe, going to be another, awesome build.

@thomasst.martin3308 2 жыл бұрын

Fun winter ahead.

@larrymacdonald9427 2 жыл бұрын

9:47 the great cornholio. I lost it when I saw that.

@62_C10 2 жыл бұрын

It will be nice to see you straighten out the old frame. Stay well fellows! Thanks!!

@rhinoswigart6748 2 жыл бұрын

Cannot wait to see that Ardin engine in!

@Dave_Boyer 2 жыл бұрын

I’ve never considered making my own sub rails since I’m kinda fussy and like to use factory stuff, but this has me thinking….

@mr.goodpliers6988 2 жыл бұрын

Sins of the past...

@andrewwhitnet3557 2 жыл бұрын

Great job,thanks.Cut those strings off the hoody before you use the mill or a grinder I want to continue watching your excellent work .Cheers from flathead V8 fan in UK.

@easttexastramps 2 жыл бұрын

you guys turning me on to glick's was life changing! i'm there like every other week. thanks!

@IronTrapGarage 2 жыл бұрын

Haha awesome! Gotta keep them in business! We go at least once a month!

@jimmygarner696 2 жыл бұрын

This thing is gonna be very cool!

@joesalle2964 2 жыл бұрын

excited to follow this build

@THROTTLEPOWER 2 жыл бұрын

Great vid!!!!!!!!!!!!!

@offensive164 2 жыл бұрын

Everytime we say bung, insert "corn holeo" 🤣🤣🤣

@brianrhodes237 2 жыл бұрын

Can’t wait. Lots of detailed videos please

@black88coupe 2 жыл бұрын

Looks good

@henryg683 2 жыл бұрын

Looking forward to seeing the progress on this one!!!! I can’t wait to see the awesomeness!!!!!!

@gregl1824 2 жыл бұрын

Awesome guys. Thanks for the update on this build . Looking forward to see it progress.

@smedley333 2 жыл бұрын

I like update vidoes. It's fun to stay up to date. Thanks, Steve

@johnrickett3919 2 жыл бұрын

From a journeyman machinist , drill chucks are for drilling and collets are for milling.

@billhuntington5163 2 жыл бұрын

I'm so jealous of your local steel yard. Nothing like that here in Bloomsburg. 🙄

@terrancesweeney1870 2 жыл бұрын

Thank you Matt and Mike for the update on the '33!

@richball9576 2 жыл бұрын

This will be an amazing car. I've been looking forward to it!

@brdnsky6417 2 жыл бұрын

Sounds like a nice ride when completed. Good luck. Ronnie.

@richardsiddon610 2 жыл бұрын

Cheers guys! Have a great weekend.🙂

@1fknhpycmpr355 2 жыл бұрын

Awesome, i've been waiting for this!!!

@Mercmad 2 жыл бұрын

Adding a quicky means a Model A cross member and Spring. And ear muffs.

@IronTrapGarage 2 жыл бұрын

You won’t hear the rear end over the pipes.

@willbesquared6260 2 жыл бұрын

Man am I jealous of that scrap yard..cars gonna be killer guys!

@kevinkenyon7045 2 жыл бұрын

Matt and Mike looks like another great project! Thanks for sharing. Kevin

@charlesherrick7400 2 жыл бұрын

Matt---now a part of the coffee patrol. Love lt.

@cheesuscrust1085 2 жыл бұрын

This is awesome, looking forward to it!

@geofo60 2 жыл бұрын

Looking forward to seeing the ‘33 Coupe project take shape over the winter months. It’s going to be a really cool 😎 Hotrod. Great content as usual from ITG. 🇬🇧

@ZippoVarga 2 жыл бұрын

I've got one of those Smithy Mill Drill Lathes also Matt. They're SO handy to be able to use both the lathe and mill on a single piece. I still have my large Mill, but I find most work I need to do I can do on the Smithy. This build IS going to be awesome! Reminds me a little of the Free-T. Cheers Matt and Mike! Zip~

@alanpaulick7815 2 жыл бұрын

Awesome Matt going to hop on and follow you on this great project 👍

@petervogwill6499 2 жыл бұрын

Good prospect...nice cab , enuf good frame to work with...your parts plus a rehab engine etc = NICE ROD..! Go..!!

@tommytompley4950 2 жыл бұрын

WoW 33 already looks good,on the operating table 👍😎👍

@bradcarlson9564 2 жыл бұрын

I am looking forward to this build

@torbar9603 2 жыл бұрын

Looks like a fun series!

@helltrucker6667 2 жыл бұрын

Been waiting patiently on this car! Has inspired me to look for my own 3 window! As a 6 foot plus tall dude, I'm hoping I can still fit in it with plans to chop the top. Can't wait to see what yall come up with! -Josh Buffalo, NY

@grandudetonesnob7107 2 жыл бұрын

So stoked to see this one get going! Are you going to be able to get footage of that blown Ardun motor coming together?

@brenttuttle2692 2 жыл бұрын

👌NICE.

@lenbehr2571 2 жыл бұрын

Hey Matt. I’ve been watching your channel for some time now. I’ve been waiting for you to start this project. It’s going to be bad ass! I think you should put some really big fat tires on back though.

@dombutler7685 2 жыл бұрын

I'm realy looking forward to seeing how this turns out.

@SpatialDragon 2 жыл бұрын

If I was taking the car to Bonneville or something, chopping it down to tank turrets for windows would make sense, but unless you are under 5 foot and love being stuffed into the trunk of a car, I will never see the point to the chopping of the tops. I like to sit up and be able to see around me.

@robertjean659 2 жыл бұрын

Looking forward to this build. 👍👍🇦🇺🇦🇺

@mattiascarlstedt1647 2 жыл бұрын

Love that car!

@shaggy2scooby4you 2 жыл бұрын

yes 👍 good for your build should be a lot of fun work 😀

@WACRE44 2 жыл бұрын

This is so much fun fav car like pagota!

@mattskustomkreations 2 жыл бұрын

The beginning of this video sounded like the beginning of Van Halen’s “Hot For Teacher”. 😆

@LVVideoGuy 2 жыл бұрын

Just as a note.. Love how you decided to mill the opening from 2" to 2.25".. but PLEASE.. remember that when you are feeding your work INTO the cutter and it is turning in the direction of the cut.. it can VERY EASILY grab your work and do some SERIOUS damage.. that's called CLIMB MILLING.... at the 4:58 mark... It's going to be an amazing looking car when you are done... they all are!!!

@IronTrapGarage 2 жыл бұрын

Fully admit I’m a beginner with machinist work. Have a lot to learn!

@LVVideoGuy 2 жыл бұрын

@@IronTrapGarage No worries.. I am NO way a seasoned machinist.. and I know from experience what climb milling can do...

@jons7771 2 жыл бұрын

Bung-hoolio!

@user-pj3le8fr4m 2 жыл бұрын

Barry Gilgen, alright I love this been waiting for the 33 since you bought it,coolest car ever and the way your going to do it is fantastic, the arden motor will be great. can't wait to watch every episode of this one.

@chaddycatdaddy8775 2 жыл бұрын

Bitchin Bo Huff shirt!!

@volvobrynk 2 жыл бұрын

That is so cool. I’ve only seen bobbed horns, on dry lake 32, running full hood. So I’m very curious to what it will look like.

@_Peremalfait 2 жыл бұрын

I was interested to learn of your clever process for rust proofing the frame. I worked for a tap and die company and we had a process for surface treating taps which involved putting them inside a steam furnace which turned them black, a sort of controlled oxidation. I'm guessing what you did to the frame is a similar process. I wonder, when it comes time to weld on your frame will you have to grind the metal first?

@TheTraakon 2 жыл бұрын

13:46...Safety Third!

@billmiller7138 2 жыл бұрын

Every hardware store had angle iron in the 50s/60s. I never liked that look although I used some. But I had a neighbor who worked at US Steel Fairless and he could get tubing so he was my steel supplier for a couple projects.

@joealbert7773 2 жыл бұрын

It's a good thing you don't have too many projects. How do you keep track of everything?

@Mercmad 2 жыл бұрын

I had to see what those things were flashing on the screen ....ha ha

@onehotpinto 2 жыл бұрын

I'm sure you have mentioned it in a previous video but what theme are you building this car to? Drag, street rod, show/drag? Have patients with me, I'm old and forgetful. Thanks for the videos, they give me hope for the continuance of the hobby.

@jimandlinsnow7002 2 жыл бұрын

Bout time. Just kidding. Looking forward to the build.

@gerrikupicki4060 2 жыл бұрын

👍👍👍👍👍👍👍

@hotrodbob. 2 жыл бұрын

That car is going to be so cool, can't wait to see it progress. Also, as a small business owner WHY would you let Steve cut all that steel with a cut-off wheel and no face shield not even safety glasses, gloves were good. I wouldn't gamble the safety of my employee or my business. Have a GREAT DAY and please be safe.

@87mini 2 жыл бұрын

Steve might be a friend volunteering to help. I know I wouldn't mind being a go-fer for this shop! But I agree about the safety equipment. It's hard to get people to get into the habit, but once formed, people find that the safety gear makes them more comfortable. But it takes all kinds - some folk relish the risk!

@squidgameisaliarisawnosqui5341 2 жыл бұрын

I remember that episode

@barneymiller7894 2 жыл бұрын

Am I the only one hearing "tapered bong" 😂

@sallybrokaw6124 2 жыл бұрын

The front of the frame is so hacked it will be an improvement to clean it up and round it proper.Al B.

@dennisschickling2249 2 жыл бұрын

Looking Good. #STAYSAFE #PHILLYPHILLY 🇺🇸

@ZeGermanHam 2 жыл бұрын

Not to be a ninny, but seeing Matt use the drill press/mill while his sweatshirt hood drawstrings are dangling freely makes me quite nervous.

@thomasmitchell6921 2 жыл бұрын

👍👍 are you going to finish the underside of Beautiful ?

@xozindustries7451 2 жыл бұрын

Good plan, that Arden is going to be cool, would you build a car with a 392 Hemi some day, or is that not your style?

@shartne 2 жыл бұрын

Man I really think this car is cool. It looks awesome. I miss the horns though too bad about that part I still don't understand why they cut them off seems like a huge sin to me. LOL

@dennissheridan1550 2 жыл бұрын

Sounds like that mill needs a little attention, maybe bearings and gear lash, but as they say "if it ain't broke, don't fix it".

@IronTrapGarage 2 жыл бұрын

Yea it’s definitely getting tired lol. Been looking for a suitable vintage replacement.

@dennissheridan1550 2 жыл бұрын

@@IronTrapGarage That could be spendy or you might fall into a lucky deal, keep fingers crossed for the latter.

@HansensSpeedShop 2 жыл бұрын

I think it might look better add the frame horns back on to the front otherwise it might look kind of stubby

@scottlane4194 2 жыл бұрын

i cant wait to see this project come together what's the scrap dealer you use ?

@brenttuttle2692 2 жыл бұрын

Glick's is where he got the medal from.

@kgooch69 2 жыл бұрын

What is the name of and where is that scrap metal yard that you got that box steel ?

@ViaAvione 2 жыл бұрын

What are your thoughts on Fiberglass bodies?

@edwardwerick2420 2 жыл бұрын

Why not use coil overs in the rear? It would save a ton of work and probably be cheaper too.

@IronTrapGarage 2 жыл бұрын

It’s not a modern street Rod. It’s a traditional hot rod. Use parts and styling that matches the era in which you’re building the car.

@robertironside3166 2 жыл бұрын

Hey Matt, what is the name of that steel yard where you go to get scrap iron from?

@IronTrapGarage 2 жыл бұрын

Glicks

@robertironside3166 2 жыл бұрын

@@IronTrapGarage Mosese B. Glicks?

@1339LARS 2 жыл бұрын

!!!! //Lars

@shaggy2scooby4you 2 жыл бұрын

is your home boy getting close to his build yet 🤔

@vr6swp 2 жыл бұрын

#cornholio

@ViaAvione 2 жыл бұрын

You could have also deflated the tires

@ronaldmcclenahan3096 2 жыл бұрын

You guys are really gonna have to pay for all this coolness when you get older...Matt's probably Gonna have to take over for Santa Clause ? and Mike, The Easter Bunny ???

@gerrikupicki4060 2 жыл бұрын

🙂👍👏1933👍