The "Zed" master cylinder rebuild

No video

The "Zed" master cylinder rebuild

Рет қаралды 2,891

Күн бұрын

Today we'll rebuild the master cylinder for the 1978 Camaro Z/28.
When all the replacements you get aren't correct, rebuild your original.
Recently got a tri-pod, and as you can see I haven't quite figured it out yet!

Пікірлер: 12

@MrMbrewerrn Ай бұрын

Great audio, the entire recon is just off screen. Just like the master cylinders you bought, just not right. Thanks anyway.

@therealguygarage2668 Ай бұрын

@@MrMbrewerrn all of your videos are excellent....oh wait..

@mrbubbarosa Ай бұрын

I hope this is your first U tube video and learned something... audio was good... vid is pretty lacking

@therealguygarage2668 Ай бұрын

@mrbubbarosa this was 3 years ago......I find it interesting that all if you trolling can't seem to figure that out, maybe have a look at a video of mine from within the last year.

@73chevy22 Ай бұрын

Literally can't see anything in the entire video.

@therealguygarage2668 Ай бұрын

@@73chevy22 excellent.

@Zackthefanman76 6 ай бұрын

What rebuild kit did you use?

@therealguygarage2668 6 ай бұрын

You need to know if your master has a 1" bore or a 1 1/8" bore.

@chrisbenda9929 3 ай бұрын

show what you are doing? terrible camera work.

@therealguygarage2668 3 ай бұрын

Awesome camera work on your videos.....oh wait...

@johnthompson1978 Ай бұрын

Rebuild it again. This time show your work on camera. You didn't even show the label on the lube tube. We literally looked at the back of the tube for 6 minutes and I still do not know what you used.

@therealguygarage2668 Ай бұрын

@johnthompson1978 so let me get this right, you want me to rebuild it again, just for you? It's been functional with zero issues on the car now for years. I used a synthetic grease, you can also use DOT3 to lube the seals when you assemble. Next master I do, I'll record....