This video is so clear and straightforward..much much better than the service manual. Probably the BEST video I have watched

I haven't done the job yet... but this is definetely the best "how-to" video I've ever watched. Thank you so much! Class act!

good camera angles, and the mechanic doesn't ever really get in the way of what we are trying to see. Good video!

Love professional videos like this! Thumbs up for sure!

Excellent video and very helpful! Just finished installing this exact clutch in my GTS Sportback. Thought I'd share some tips and observations that might help others (in no particular order): 1. I encountered some minor differences to the car in the video, which I assume is the 2.0L, but nothing that couldn't be easily figured out. 2. Did the job in my driveway on jack stands, so very doable for the weekend mechanic. Just get the front end of the car as high as possible so you have room to drop the transmission. I used a couple wood blocks on the jack to make sure I could get the jack stands high enough. 3. I was able to do the whole thing by myself, with the exception of putting the transmission back into the car. Definitely needed an extra set of hands and eyes to line it up. 4. I could not for the life of me get the transmission back into place without removing the 3 studs for the top transmission mount. They kept hitting the frame rail when trying to lift and angle the transmission back into place. 5. I removed the front transmission mount bracket to create more space for maneuvering. It's only held on by 2 bolts. 6. The 3 bolts holding the rear transmission mount bracket were really REALLY stuck for me. I ended up removing the mount itself that is attached to the subframe to create more space to get leverage on those bolts. 7. I used an engine support bar and transmission jack from Harbor Freight. Worked out just fine. 8. I ordered a LUK brand flywheel from Rock Auto. It's identical to OEM, except it didn't come with the dowel pins to align the pressure plate. I was able to find some on Amazon that worked perfectly. They are 8mm in diameter and 3/4" in length. Search for "Flywheel Dowel Pin Set, 8mm Diameter, Extra Long, 8 Pack, Compatible with Dune Buggy." 9. If replacing the flywheel, you'll need 7 new flywheel bolts since they're torque-to-yield. OEM part number is 1120A138. 10. The clutch alignment tool that it comes with did not work for me. It fits into the crank, but very loosely. The weight of the clutch disc just causes it to fall right off. I measured the hole in the crank and it's 15mm. The clutch alignment tool was about 0.5mm too small in diameter. Autozone has a metal clutch alignment tool for $20. You can rent it, but I just ended up buying it since I know I'll need it for my other cars. 11. My car has 125K miles, so I also replaced the rear main seal while I had access to it. Just a bit of cheap and easy preventative maintenance. 12. If you have trouble getting the axles back into the trasmission, grease the splines and retaining ring. Should slide right in if you do that. 13. My clutch master cylinder had failed, so I replaced that as well. It's a plastic piece of junk. Amazingly, the Evo X uses the same one, so you can find videos and write-ups on how to access/remove/replace it. I suspect that that metal aftermarket ones for the Evo X would work, but I just went with one from Rock Auto. 14. Reverse bleed the clutch. I first used a vacuum bleeder, but I believe that still leaves an air pocket between the bleeder nipple and slave cylinder.

One of the best videos i've seen. Totally professional.

Thanks! I got it done on a weekend. Process was a bit tedious wiggling and reinstalling the transmission but otherwise easy.

Éste es el mejor video que eh visto , excelente explicación, excelente tomas de cámara y edición y una Profesional explicación paso a paso de todos los componentes del vehículo. Verdaderamente son unos expertos. Felicidades y hacia delante amigos 😊👍🏻 Saludos desde Puerto Rico 😊🇵🇷🌺❤️ This is the best video I have ever seen, excellent explanation, excellent camera shots and editing and a professional step-by-step explanation of all the components of the vehicle. They truly are experts. Congratulations and forward friends 😊👍🏻 Greetings from Puerto Rico 😊🇵🇷🌺❤️

I can change oil, break pads, and all the little repairs that I can reach. Mad props to these mechanics. There's no way I would be doing this, and remember all the parts. I'll be like where this part go again, or just leave it out. I was just curious about this.

Best video out there

Awesome video, guys!

Omg thank you sooo much. ❤

Awesome video

Muchas gracias! Su vídeo es claro de todos los pasos a seguir para cambiar el clutch de mi Mitsubishi! Mejor que en la agencia! 👏🏻👏🏻👏🏻👊🏻👊🏻👊🏻

Thank excelent video profesional. Muy bueno el vídeo me ayudó muchísimo tengo ese modelo dé auto y no sabía como cambiar el adaptador del cilindro

best video did my clutch like a pro thank you guys

I have a 2019 outlander sport, its kind of rare since it has the same trans and 2.0 engine. Not too many manual suv like mine. I guess when the time comes I can replace my clutch with the one in the video. I am very easy on my trans ,so it may be a long time before i need it. 55k miles and no sign of the clutch wearing , these are very reliable drive trains for sure.

Very good

Thank you for showing re-assembly. Irritating when the manual says "reassemble in reverse order." Often it's not that straightforward. And thank you for showing the torque specs instead of the usual KZfaq Mickey Mouse "hammer it on with an impact gun as hard as you can" or until it "feels tight."

Great quality video, I was successful in installing my new act clutch. Now shifter is "loose" can't get in reverse. When I drive it seems like it's always on the same gear. Any ideas?

Where can I find the part at 10:11? The bleeder key that is mentioned. I can't find that online anywhere, don't even know the official name of it.

Hola soy de panama y tengo un Mitsubishi de esos. Se me daño el adapter del clutch o bombín el que va afuera del collarín y aqui en panama no lo venden mi carro lleva 3 meses si andar por esa pieza y no la consigo

I know this isn’t a tuning video but I’m having a hard time finding anyone that tunes a 2009 Mitsubishi Lancer GTS in Philadelphia? I also have a question about my trans or clutch, so when I shift into second gear and I’m letting of the clutch I can feel Im guessing is the flywheel or something spinning like I feel the teeth on the bottom of my feet spinning and I don’t really feel it grab on but it somehow grabs on and sometimes it buckles, I can also go thru all the gears fine, maybe I haven’t noticed it on other gears as much but second definitely doesn’t feel right. what would you recommend?

Hi i love your video, Can i ask how did you bleed the clutch ? I recently change my clutch but my press pedal is all air

No pilot bearing?

Do have sellers in the Philippines?

I wanna do this at home because my gearbox crunches only in third gear. I see no leaks in the master and slave cylinders im guessing it synchros inside the gearbox are gone. Great video do you recommend doing this on the floor at home...

Will this work on a 09 ralliart.and if possible can you recommend the best clutch for the ralliart.

Hello, I have a 2009 lancer 2.0 non turbo and want to install a stage 2 clutch . The issue is that I live in East Cost, Canada and I'm finding it very hard to find this part. Where can I purchase the proper clutch and flywheel for my 5 speed ? What is your advise?

I installed one on my 2008 lancer gts. Afterwards, I noticed a gear grinding noise occasionally, it's mild and does not affect anything. Just wanna know is this normal?

Saludos!! En referencia a como sangrar el clutch, alguien que tenga diferentes formas que les sean utiles y rapidas?

Does 4G93, 4G63 bearing clutch can be used on the 4b11,4b10 system?

After having this clutch installed on my evo x im getting a dragging noise when taking off or backing into a turn. Not all the time though. Thing is that it sounds like it's coming from rear of the car. Any ideas ?

Do I really need to remove the subframe? I dont think we have an engine hoist just laying around

I was wondering where I can buy a service manual for my 2008 Mitsubishi Lancer GTS?

Hey does anybody what kind engine hoist attachment they used and where I can find one?

What is the bolt size / threading for the engine support bridge that goes into the block?

Can I use this application on my ‘16 ES for daily driving? I’m highly interested in purchasing this part. Also, does ACT sell lightweight pulleys as well?

Anyone know how to bleed a slave cylinder while doing this if we are replacing while the transmissions open on this same car? Or has any good references

is that clutch kits can plug&play to lancer 4b10 😂

Which one is better act or excedy clutch kit for evo 4 or evo 5

Is this the same thing as replacing a 2011 lancer es manual?

is manual gearbox is the same for lancer gt 1.6 and 2.0 ?

Sorry if someone has asked this. But is this the same for a 2015 lancer ralliart?

I cant put the center member back on the holes don’t get aligned

How do you remove the shifter nobs?

Nice video, does all the torque specs work for different clutch brands or not

Would a bad clutch cause a rattling sound?

So, the manual gearbox is the same for the 2.0 and 2.4?

Hi there I have a question here I have a lancer se 2012 and my torque clutch converter gave out I was wondering even though I am still able to drive the car will it damage my transmission of I keep riding it to and from work.

Just purchased the mb11-hdss kit with a good flywheel, but I've been having a hard time tracking down good quality flywheel fasteners. Would you have part number available for ones that would fit my 2.0L?

Will a Evo X stock clutch. function on a gts y or y not ?

Hi, the lancer in the video is manual transmission or cvt?

Hello, what size are the flywheel bolts? I wanna buy them before I open mine

Can you make a video for the evo x?

Going to attempt this shortly if I mess anything up or break anything /lose anything bits left over gonna blame you guys

U guys have shop in los angels