SURFACTANT: VINYL CLEANING BUYER’S GUIDE. ONCE YOU USE IT ON YOUR VINYL, YOU AIN'T GOING BACK!
Рет қаралды 78,285
Күн бұрынOne of the most important tools in the armoury of the vinyl fan, Paul Rigby asks what they are, why they’re important in terms of vinyl cleaning and which surfactants you should buy
TO BUY:
Tergitol: ebay.to/2ZWrQ5W
Triton X-100: ebay.to/3mJZ8z2
Degritter: ebay.to/2ROxEdn
Audio Desk: ebay.to/33QmBWB
Ilfotol - EUROPE: amzn.to/303HZGR
Ilfotol - UK: amzn.to/33QcqkY
Ilfotol - USA: amzn.to/3mFN6qB
CONTACTS:
1: Degritter ultrasonic cleaner: degritter.com
2: Distilled Water: apcpure.com/product/distilled...
3: Pipettes:
UK - amzn.to/2FX2RJ9
USA - amzn.to/32U8GQ3
EUROPE: amzn.to/3632yau
4: Barrel tap: ebay.to/3kIE8XA
Use the above tap location as a visual reference only. You may prefer a different design and the price may be much cheaper to boot. There should be plenty of choice.
Check out my website at: theaudiophileman.com
PATREON
The page arrives with a growing range of BUYER'S GUIDES.
I want to thank you for any support you might be able to offer. My Patreon page is here: / audiophileman
SOCIAL MEDIA:
You can also find me via this lot:
Facebook Group: / theaudiophileman
Facebook Pages: / audiophileman
Twitter: / paulrigby50
LinkedIn: / audiophileman
Instagram: / audiophile_man
Tumblr: www.tumblr.com/blog/theaudiophileman
IMAGE CREDITS:
Water Splash 5047 - eskipaper.com/water-splash.html
Water Splash - www.freeiconspng.com/img/784
cool-water-splash-1 - accepta.com/project/broad-spe...
Water tap - Image by Katja Just from Pixabay
Image by rony michaud from Pixabay
Image by Arek Socha from Pixabay
Image by Miguel Á. Padriñán from Pixabay
Photo by mn-que from FreeImages
Photo by Bjarne Henning Kvaale from FreeImages
Photo by Marco Kranz from FreeImages
Photo by Marco Kranz from FreeImages
Photo by Andras Unger from FreeImages
Photo by Dane Deaner from StockSnap
Photo by Kai Oberhäuser from StockSnap
Photo by Agnieszka Bladzik from StockSnap
OTHER CREDITS
Old Bossa by Twin Musicom is licensed under a Creative Commons Attribution
creativecommons.org/licenses/...
Artist: www.twinmusicom.org/
@TheAudiophileMan 3 жыл бұрын
I was recently alerted (10/3/21) by a kindly contributor in the Comments section of my Website that Triton X-100 has now been banned for use in Europe. Hence I now do *not* recommend Triton X-100 for use in vinyl cleaning. There is talk of a replacement being tagged as a safe alternative. Something called Nereid, which is a cousin of Triton X-100 but without the bad stuff, basically. I'll keep an eye on this contender because it's still in the testing stage, so I hear. When I can, I'll give it a test. You can find more information here: en.wikipedia.org/wiki/Triton_X-100 Here's a précis of the Triton X-100 issue: “A Triton X-100 degradation product has indeed turned out to be ecotoxic as it possesses hormone-like (estrogeno-mimetic) activity that may act on wildlife.[12] The ECHA finally included the substance group in the Authorisation List (Annex XIV),[13] mandating the pharmaceutical and other industries to replace this detergent by the “sunset date” January 4, 2021, thereby affecting EU manufacturers, importers, and downstream users, as well as non-European manufacturers exporting their products into the EU.”
@rajg8136 3 жыл бұрын
Thanks Paul, please keep us posted and updated
@AntAciieed 2 жыл бұрын
Banned in Australia too
@Andrew-ps9zp Жыл бұрын
Sorry if this a stupid question, but why can't I use less scary products like dish soap? I've heard that many people have good results with that
@ederoliveira8039 Жыл бұрын
I understood that I have 20 drops of triton in 2 liters of water but how much of this solution should I add in 6 liters of distilled water in the ultrasonic machine ?????????????
@allankvist6741 10 ай бұрын
@@Andrew-ps9zpAs mentioned below dishsoap works perfectly. Just use very little. Its not the foam that cleans. Just the opposite.
@pablodepeche 3 жыл бұрын
I got the Tergikleen thanks to you Paul, amazing improvement, thank you!!
@critical_listening Жыл бұрын
These descriptions of the sonic differences between surfactants… I literally had to look and see if this video was posted on April 1st. You audiophile guys crack me up!
@matthewtaylor7355 Жыл бұрын
These descriptions of the taste differences between types of alcoholic drinks.. Drinkers crack me up
@maroon2k 8 күн бұрын
@@matthewtaylor7355 If you find any drinkers who discuss the taste differences depending on what coasters they put under their glasses, that would be a fair comparison.
@billdenton5774 Жыл бұрын
I just needed to offer you a mighty thanks !! A week ago I received my 500 ml bottle of TritonX-100, and it just works fabulously !! I haven't tried any of the others, but this stuff just gets in there and loosens and cleans the grooves, and ultimately the sound improves . I'm thrilled as I sit in my music room, cleaning, and listening to, records. Thanks Again !! 🎩✌️💿
@thevinylmuseum2958 2 жыл бұрын
Hi Paul, I just stumbled onto your channel today and found this video very informative. Nice to have an opinion on this subject with no invested interested on the brand, except your own money. I have already decided to buy the Tergikleen for my Ultrasonic Kirmuss cleaner. Well Done! Looks like I will be watching a lot more of your channel.
@ricochet243 3 жыл бұрын
Outstanding review, Paul. Have shared this with friends who need considered advice re. cleaning and I look forward to the three parter.
@ginovairo6487 2 жыл бұрын
This is a wonderful review and very informative. Great work! I used Kodak PhotoFlo in my ultrasonic cleaner (1:200). I checked the MSDS (material safety data sheet) and the ingredients are Triton X100 and polyethylene glycol. Ilfotol uses a different surfactant (branched, ethoxylated isotridecanol) and a preservative. I was pleased with the result with PhotoFlo, with improved sound after the wash. Quieter and improved detail (both upper and lower frequencies). Most noticeably, the sound was more "relaxed" and the 3D soundstage/transparency definitely improved. I’ve ordered some Tergikleen to try as well as a new product from GrooveWasher, G-sonic which is claimed to be specific for ultrasonic record cleaning.
@lebeltoottoot9212 3 жыл бұрын
I may not have the equipment ( hearing and hi-fi kit ;-), to notice many of the improvements often mentioned, but really appreciate those who can. To this end I always rate these video’s highly. Triton x-100 ordered👌
@TomnJudy 3 жыл бұрын
Great review Paul, good solid info. I would note that the EU & UK is set to ban all octylphenol ethoxylate detergents like Triton X-100 in new products at the beginning of the year as there is evidence that they negatively effect aquatic environments. Biodegradation produces a toxic aromatic hydrocarbon product (from the released octylphenol group) that mimics estrogen which interferes with the reproductive systems of fish. That said, they will still be available in N. America. I would use Tergitol 15-S-7 (Pareth-7) as a substitute in Europe. Never mix Tergitol with alcohol, as it causes rapid breakdown of the sufactant causing sticky precipitates to form. The Ilford Ilfotol used to contain approximately 6% Triton X with a trace amount of a preservative to extend shelf life, good for cleaning records, but you would need to use 16 times more to achieve the same detergency as pure Triton. Due to the ban about to take effect, Ilford has already changed to a more bio-friendly surfactant, not sure which. The PhotoFlo contains 5-10% Triton X, but also contains 25-30% Propylene Glycol which can leave a trace of sticky film on your record (sounds like the Kirmuss magic formula to me). The Tergikleen guy knows very little about chemistry, and won't tell us what his "proprietary" formula contains. We can hope that it is Tergitol 15-S-7, or even better yet a blend of 15-S-3 & 15-S-9, but we just don't know. What we do know is that his recommended concentration level of 1ml per gallon, is way below other recommendations for using Tergitol products to clean records. It should be about 0.1% to 0.5%, lesser for lightly soiled or US machine, higher for heavy soiling and hand cleaning. You are certainly on the right track, a high purity non-ionic surfactant in definitely the best way to go, and by adding a little pinch of quat (quaternary ammonium compound) you will never have a problem with static again.
@Axum73 Жыл бұрын
This video has been very helpful - thank you!
@williamgordon4392 12 күн бұрын
Thanks so much. I have watched the cleaning guide twice. I think that I have the process straight in my mind. Thank you for addressing my concerns. I'll let you know how it goes.
@Sayaran 3 жыл бұрын
Just want to say thanks for putting out your videos, not sure people appreciate the work that is involved in the production, scripting, and production of KZfaq videos. I appreciate your thoughts and perspective. Thank You!
@TheAudiophileMan 3 жыл бұрын
That's very kind of you, many thanks :)
@firecatfly 3 жыл бұрын
Brilliant and so spot on.
@TheAudiophileMan 3 жыл бұрын
TIME STAMP: to fast forward to the products, click: kzfaq.info/get/bejne/r9d8jNxltKjdgnk.html
@florentcharabouska7388 3 жыл бұрын
Hi Paul Thanks for this very interesting review. I am impressed by your hability to detect differences in sound. I à used to clean my records in home made US machine with 20% alcohol 79 % of distilled water and 1% triton x100. And it works fine. I tested today a prewash with distilled water and few drops of Triton x100 as you recommended. I have to say improvement is very significant. I cleaned today records from 70s and they are dead silent after precleaning and cleaning. So thank you very much for this advises.
@gittarman 2 жыл бұрын
I don't even care what subject you'd be teaching, I'd attend every one of your lectures. Party on, man.
@TheAudiophileMan 2 жыл бұрын
Thank you Anthony, very kind of you.
@elliottcrews4997 2 жыл бұрын
Interesting deep dive into surfactants. I use Triton X-100. About 3 years ago I bought a gallon of 100%. I clean a lot of records, maybe 50 to 75 a month and still have about half a gallon left. I use a manual basin so I use a lot. First off I reduce the Triton from 100 to 10 percent by taking a gallon jug of distilled water and pouring out 13 oz and pouring in 13 oz of the triton. Then I take another gallon of distilled water and pour out 18 oz. I pour 4 oz of the 10 percent triton into the jug and then pour 14 oz of 70 percent of IPA. That gets me to a one gallon cleaning solution which I use primarily to fill my vinyl styl basin but also put into a spray bottle depending on how I'm approaching the record cleaning. I can usually clean between 65 and 100 records with a gallon. I haven't heard anything regarding Triton being banned in the US but by the time I finally use up that gallon of concentrate perhaps it will be, should take another couple of years.
@Vinyl-Movement 7 ай бұрын
Thank you so much. Just re-watched it.
@leyland9999 2 жыл бұрын
Organic bass, subtle this and that…..oh oh. You know, I hear no differences at all if the groove is clean, so no residues at all, no matter what product I have used. I simply use denaturalised alcohol bought at the chemist, distilled water and some Fairy (or equivalent) dishwasher liquid. Did so for decades and continue to do so. Yes, the trusted Disco Antistat does the trick for me, as I mentioned for decades now. You know, my records are not destroyed by the alcohol at all, just use as little as possible which I do. The Fairy breaks the surface tension and gives the record surface a nice and smooth shine in which the stylus feels at home. No residu ( quite unlike the original Disco Antistat fluid! ) at all. Minimal costs, maximum results. Greetings from Holland, bye, Willem.
@simistef Жыл бұрын
What are the ratios you use ?
@aerobill8554 Жыл бұрын
Hey Willem. William hier. Mijn dochter van 16 is net begonnen met (2e hands) vinyl. Wat is je advies tav mengverhouding ? Gr. uit Limburg 😊
@leyland9999 Жыл бұрын
@@aerobill8554 Hallo William. 20% alcohol (bij apotheek halen) 80% gedestilleerd water, gedemineraliseerd zo je wil, en een scheutje Dreft. Dreft, omdat de samenstelling sterker is, twee theelepels is genoeg. Dit laatste geeft een minimaal maar wel effectief antistatisch effect en het breekt de oppervlaktespanning van het water. Dit is van belang bij het zoveel als mogelijk voorkomen van druppels als je de plaat in een rek, bijvoorbeeld van de Disco Antistat wasbak, wilt laten drogen. Ik droog de platen met keukenpapier, twee vellen per plaat, beide kanten van de plaat dus. Mét de groef mee (!) de plaat afdrogen. De capillaire werking van het keukenpapier neemt óók het achtergebleven vuil mee het papier in. Daarom dus per plaat twee vellen en die na de plaat te hebben gedroogd wegdoen. Platen die je bij de tweedehandswinkel hebt gekocht of heel vuile platen eerst onder de kraan met handwarm water en een beetje Dreft voorwassen. Dit om te voorkomen dat je waswater meteen enorm vervuild raakt. Om onder de kraan het label te beschermen gebruik je de schijf die uit twee helften bestaat die bij de Disco Antistat wasbak wordt geleverd. Het is niet nodig die net onder de kraan gewassen plaat helemaal droog te maken. Als laatste nog dit. Het kan voorkomen dat je na de totale behandeling tóch nog enige tikken hoort. Die verdwijnen zodra de plaat een keer is afgespeeld helemaal. Natuurlijk krijg je een echte kras of andere beschadiging niet meer weg. Succes! Groet, Willem.
@DuzBee 6 ай бұрын
Hi Mate, what ratios do you use? Cheers.
@leyland9999 6 ай бұрын
@@DuzBee Hi! First of all, make sure your records are clean, that is, clean of visible dust and fingerprints. Do that by making the records wet (Pre wash). Protect the label. Use lukewarm tapwater and some dishwashing fluid. Flush all water and dishwashing liquid away. Dry the record, the record doesn’t need to be thoroughly dry. Second phase. Prepare a solution of one part denaturalised alcohol and three parts distilled (!) water and a few drops dishwashing liquid. Don’t know if you have “Fairy” in your area but this is a highly concentrated fluid that removes all grease and, as a side effect, makes the record anti static. Poor this mixture into the Disco Antistat basin and clean the record as described in the manual that comes with the Disco Antistat product. After cleaning, leave the record in the rack for a minute or two so most fluid will be in the bottom of the rack. Then, dry the record by wiping it dry with paper kitchen towel and wipe FOLLOWING THE GROOVE! This is utterly important so all contamination, if any left, will be sucked out of the groove by the capillaire action of the kitchen towel. It is labour intensive, I know. You will be rewarded though by a deep clean record. New records do not have to be pre washed. Pre washing is only needed in case of used records. Cleaned records should be put in lined inner sleeves. Oh, it might occur that a freshly cleaned record still produces some crackles and pops. If these are no real scratches they will disappear after one or two plays. Succes….!
@scottspinner1 3 жыл бұрын
Great paul very helpful
@phrayzar 5 ай бұрын
Here in Australia I use filtered tap water. We have excellent quality non hard, non recycled water and the filtering deals with any unlikely bacteria. Never had any issues with my ultrasonic cleaning.
@markhancockhecox 3 жыл бұрын
Voice crack @9:23 But seriously this is an awesome video, extremely comprehensive and helpful! Thank you for making it!
@rickmilam413 Жыл бұрын
Like you I found the Degritter solution, used in their machine as directed, to do a good job of cleaning but things became rather opaque. I also have a reaction to it in terms of heart arrhythmia so, for me an obvious big strike against it. However I tried rinsing it. I'm a huge proponent of rinsing, even on products that claim not to need it. I set up a fan blowing the fumes away from me and did a before, then an "as directed", then a thorough multi step rinse. The recommended use running one cycle (heavy) and then listening was dull. I did two distilled water rinses (I have 3 tanks) then a lab grade water rinse on my vacuum machine. I really like it. I'm doing experiments with my Kirmuss I've used for two years, the new Degritter and a Pro-Ject vacuum machine. Each does some things well. The Degritter with Tergikleen seems the most open but sometimes seems slightly thin. I did. try the A.I. US product and it's OK. I like their products for vacuum machines. The Degritter was rinsed has really nice solidity and midrange textures, seems a bit more fleshed out than the Tergikleen but it is more open with a more expansive soundstage. It's almost like pick the one that suits a particular LP..... That way lies madness. But... what if I followed the Degritter/rinse with a Tergikleen rinse? Or tried the Triton X-100, which I have on order.
@matthewtaylor7355 Жыл бұрын
Polysorbate 80 is better than the muddy ILFOTOL and is very cheap 10.50 GBP for a litre. It ain't thin sounding... Tergikleen is piss takingly xpensive
@mostirreverent 3 жыл бұрын
Triton x Brings me back to dissolving cell surface membranes in a bio chemistry lab :) It’s amazing how many surfactant there are and the types, usually based on charges
@bobl.1044 2 жыл бұрын
I think that's how they all essentially work: think washing up liquids, soaps and shampoos - they all lower surface tension and many then dissolve grease. A lot of household cleaning agents use "anionic surfactants" in their ingredients lists
@VinylMonkey58 2 жыл бұрын
I was just going to add a comment thanking you for this informative video which has helped me produce stunning results by applying a surfactant prior to my normal Disco Antistat (distilled water/alcohol) wash cycle. I can't believe how much positive difference it has made. Unfortunately I had not previously looked at your comments page and seen the top comment about Triton x100 (which I used after buying on eBay). Does anyone know why it is considered so dodgy?
@Vinyl-Movement 7 ай бұрын
A little story regarding the importance of rinsing. Although you mentioned it, somehow, I still believed the manufacturer of my vacuum machine, in this case, the keith monk prodigy, and only used the liquid they provided. Now I cleaned two new LPs without prior listening to them without cleaning, and was surprised that they had incredible surface noise. I ordered the clear audio liquid I saw in your videos and cleaned them once more with the new liquid, but again terrible surface noise. I then ordered Ilfotol and bought some distilled water and did a solution of 0.03% as suggested by @Dave Denyer. I did one cleaning with the 0.03% Ilfotol solution on the Keith Monk using a new kind of cheap 15 EUR Kabuki Brush (thank you for this amazing tip) with the Ilfotol solution and one afterwards with another Kabuki Brush with distilled water only. What should I say. The results are really impressive. First of all the surface noises is almost gone, secondly the overall sound quality has improved a lot. Can’t wait until my Degritter MK2 is delivered here in Germany. Hopefully it will be before Christmas. Thank you so much for making these videos.
@Longbody1000 3 жыл бұрын
Hi Paul, helful review as always. I've bought some Triton X1 could you confirm the mix ratio with distilled water before brushing onto a vinyl? I was intending to apply this prior to cleaning in a Knosti using water and isopropyl. Thanks
@TheAudiophileMan 3 жыл бұрын
I think I added 20 drops (but they are very small drops from the bottle's dispenser) per litre.
@false_binary Жыл бұрын
Great vid! I am using a Humminguru w/1 drop of Tergikleen on a 5 min bath, and then a second bath w/distilled water only + 10 min dry. I am going starting to test diluted solution as the producer suggests and see if there was a difference (my guess is no lol). reservoir
@rareroots 4 ай бұрын
Ive collected Jamaican singles for over 30 years and we (reggae collectors) have used ultrasonic cleaners forever, with unbelievable results on very dirty records. Keep it simple, a few drops of dish soap is all you need, followed by distilled water rinse ✌️
@buddybadee Жыл бұрын
Nice comparison!
@zyb67 3 жыл бұрын
Thank you so much!!!
@aussierob7177 3 жыл бұрын
Hi Paul. I clean my records with a record cleaning fluid, a mold release agent . A work turntable (direct drive) and a record cleaning machine. Then to finish off, a bottle of record preservative. i do this to both used records and brand new ones. If this is not done there will be irreversible damage to the record after the first play.
@paulsil1705 2 жыл бұрын
I use Kodak Photo-flo 200. Used it for negatives for years and now use it for cleaning vinyl. Recommended.
@TheAudiophileMan 2 жыл бұрын
Thanks for your comment, Paul. Yes, I've looked at this one in the past. Photo Flo consist of Glycol (which I recommend for all vertical cleaners - I refer to it in my Degritter and Disco Antistat reviews and my website-based vinyl cleaning Guide) plus Triton x100 which I include in this video and test as a separate substance. That said, I no longer recommend Triton (see the warning in the Comments) because it has been found to be dangerous to wildlife. It's now banned in Europe.
@djpaul146 3 жыл бұрын
Amazing video thank you I just saw a man washing his viynl in fairy liquid in his sink and one chap using WD40 I was shouting down my phone nooooooo
@clydedmello2634 3 жыл бұрын
Thank you very much for this and all your other videos. They are really excellent - balanced and clear on your opinions. Too many You Tube videos avoid critical opinions - so thank you. One question. When you say “applied directly to the record surface” can you say how you do this please (or is there a video I’m missing).
@TheAudiophileMan 3 жыл бұрын
Thanks Clyde and no probs. You can apply the surfactant via a pipette like these in the here link: www.amazon.co.uk/gp/product/B00IZOCRB8/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 These are what I use to apply my surfactant to the vinyl surface.
@claudec2588 3 жыл бұрын
Check or grocery store or pharmacy for distilled water. All pharmacies in Canada carry distilled water and my grocery store does also.
@bshah4831 3 жыл бұрын
Superb information. I have a bath type cleaner and have backed the Kickstarter Humminguru ultrasonic cleaner. Edit: purchased the Triton x1000 and used in my Disco Knosti bath cleaner. I cleaned my old Van Morrison Veedon Fleece. Unbelievable improvement! Best £8 upgrade ever!
@Akstergrind 3 жыл бұрын
Hiya, please can you tell me where you found the Triton x1000? I can't seem to find it anywhere.
@RichieG 2 жыл бұрын
Pulling my records out of storage so they can be listened to again, so I had to start relearning all I ever knew about surfactants. Thanks for this video. QUESTION: Can't we make good surfactants at home?
@petekutheis3822 3 жыл бұрын
Happy Break!
@solominded Жыл бұрын
The U.S. Library of Congress uses Tergotol (Tergikleen is the same exact formula) for all their archival cleanings.
@slam854 3 жыл бұрын
That was extremely detailed and helpful. My application is a Spin Clean bath followed by a Record Doctor vacuuming. Earlier today a video discussed using 2-3 drops Dawn dish soap in one gallon (3.785L) distilled water with 7.4-14.7ml white distilled vinegar. White vinegar was described as a rinse agent. What are your thoughts, please?
@TheAudiophileMan 3 жыл бұрын
I've sent you a link to my own Guide as per my reply elsewhere, from my site which includes plenty of background info, hopefully that helps. Soap is to be avoided because it leaves a residue that is tough to remove from vinyl so the stylus ends up playing it which veils detail (if you've ever smelt that "lemon fresh!" advertised smell on your dishes, you're smelling residue) while vinegar is not a pure substance even in that form (I wouldn't use vodka for the same reason) so I wouldn't chance that either.
@themirrorimage2022 Жыл бұрын
Based on a lot of research I did myself but especially your lenghty video about the Degritter I ordered one myself. Now I understood from this and the Degritter video that the use of Surfactants is done before you put the vinyl in the Degritter. I understand from this video which surfactants are best to use, but what I do not yet understand is how exactly you apply it to the vinyl??? Maybe a stupid question, but I would still like it answered…..😉
@TheAudiophileMan Жыл бұрын
Check out the vinyl prep section of this Guide for the answer to that one: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@andrewprice390 2 жыл бұрын
Hi Paul, I have just bought the Degriiter and am getting ready to put my first lot of LP’s through the process. My head is spinning a bit from all the videos and articles so I am hoping you can confirm the recipes you recommend from your research. I can readily get Illfotol in Australia but Triton x100 and Tergiklean are hard to get. For the surfactant mix I think your recommendation is 1 part Illfotol to 200 parts distilled water. Do you also add glycol to this? If so, can you suggest the mix. For the rinse your recommendation is 7 parts isoalcohol to 100 parts distilled water. Could you please confirm your recommendation. Thanks for your help
@TheNaboen 3 жыл бұрын
The Cardigans "paralyzed" begins as follows: "This is where your sanity gives in And love begins "- I find that cleaning vinyl records is a topic where one can end up in such a borderland. Your considerations about Kodak Photo-Flo and any bacteria in battery water might give such a hint? When I listen to a freshly washed record, I must admit that all too often I sit and listen to remnants of debris rather than indulge in music. It's a curse there. Thank you for an interesting video, driven by your unique enthusiasm and Renaissance curiosity - as usual. This was very helpful. I have just bought an ultrasound-based system of the simpler kind, and am trying to find a good cleaning routine. When it comes to the experience of sound, I am becoming less and less objective. I have realized that I am a being who takes in the world in a diverse way. Measurements and forms can rarely give exhaustive explanations of why I experience a product or system the way I do - even if though that side of the issue is obviously important. But as a technically interested person, I still become very curious about how it can be that one surfactant can have good properties in the bass range, while the other excels at the higher end of the frequency spectrum. What is going on? Can we see this in the grooves with a microscope? Is there something with the mechanical contact between diamond and groove? I must admit that it goes a little beyond my comprehension. But, by all means. I'm not denying that you may be right.
@TheAudiophileMan 3 жыл бұрын
Thanks for your thoughts, Bjarne - the difference in sound quality can result in differences in the groove content. The stylus is dumb. It plays what it touches. Simple as that. If you clean the groove the stylus will play what's underneath and the sound will differ accordingly. It should, at any rate. What I suspect via Triton X-100 - and it's an increasing suspicion - is that this surfactant leaves a thin layer of residue which 'adds' to the bass. The stylus plays the groove and the residue. Something that Tergitol removes. With Tergitol, the sound is slowly revealed. That happens with Triton too but then bass is added and really, nothing should be added. That's my thoughts, so far at any rate.
@TheNaboen 3 жыл бұрын
@@TheAudiophileMan Sounds like a very plausible explanation. Thanks.
@jacobchild3363 3 жыл бұрын
Great information! Based on your test results, that I had no way of doing myself, I'm glad that I had already purchased Tergikleen prior to this. Also, when you put together the videos for manual and rcm using these surfactants...will you be using the same alcohol & distilled water cleaning solution for each video? Or will you be testing with multiple cleaning solutions? (Not sure if you plan on doing comparisons or just general proper method of use for manual & rcm)
@TheAudiophileMan 3 жыл бұрын
Hi Jacob - many thanks :) For the rest? I'll be utilising the best combination of liquids and surfactants for each process and finding the best combo within that. That's why I did the alcohol video (see elsewhere) and this surfactant video now, to narrow down those variables.
@GerForever 10 ай бұрын
I came to your video because I had the idea of using Ilfotol but now I am interested in the Tergikleen. No matter how many times I watch the video I still have this question I I am using a manual record clean like the Spin Clean and plan on using Tergikleen do I still use the spin cleanfluid in addition to the Tergikleen? Or does the Tergikleen replace this? Thanks
@SeanDrain 2 жыл бұрын
Thank you for taking the time to do all of these great videos, Paul! You're very informative and detailed. I have decided it's time to get more serious about my record collection and take things to the next level. I have around 1000 LPs to clean so I've began building a cleaning station and I like your method of pre-treating the records with a surfactant solution. I was wondering, do you have a suggestion/opinion on method/timing? Does the pre-treatment surfactant solution perform differently if submersed in or applied directly to the vinyl and spread evenly with a goat hair brush? Have you noticed a difference between how long you wait before moving to the next step to wash? I'm curious if leaving the record moist with the surfactant solution for a few minutes helps to loosen any particles so that they come off easier when washing? Or should I be cautious not to let the record dry after applying the surfactant solution, before washing? This is important for me to understand since I plan on doing quite a few I want to be as efficient with my time as possible. Thanks in advance for any advice you can provide! :)
@TheAudiophileMan 2 жыл бұрын
Check out my own vinyl cleaning guide. It's generally aimed at manual cleaning but if you read up until the Disco Antistat enters the scene then all of that, to that point is relevant to the Degritter. Give me a shout if you need further info: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@frankvanhelvert6231 Жыл бұрын
@@TheAudiophileMan excellent write up paul! its a lenghtly read but great,but was wondering how distilled water and the use of 1% alchohol lower the surface tension?
@TheAudiophileMan Жыл бұрын
Hi Frank, the surfactant is there is lower surface tension. Alcohol is used to do part of the actual cleaning. Specifically the oils and related residues which it melts. Cavitation actually removes it. Distilled water is just the carrier for the whole process. Oh and thank you :)
@frankvanhelvert6231 Жыл бұрын
@@TheAudiophileMan thanks paul!! so if i"m correct distilled water and the alcohol does lower the surface tension even without the use of a surfactant but not as much i assume
@HarveyJohnWillmott 2 жыл бұрын
Another incredible video. I have ordered a Disco Anti stat at your recommendation, and I have decided to go for the x-100 as it’s cheap. What should I apply the water/surfactant mix to the vinyl with?
@TheAudiophileMan 2 жыл бұрын
Please read my cleaning guide here for more on that. Give me a shout later if you need more info: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@DumbCarGuy Жыл бұрын
Gary Numan Cars was my first album ever. Maybe around 1979'ish.
@neilpearson5748 3 жыл бұрын
Hi Paul, great videos and insight for my USCleaning journey. I am going to use a pre wash method of 999ml of Deioised water and 1ml Triton X-100. My question is do i just cover the record surfaces and then pop it into the USC or should I scrub the solution with a brush to agitate it a bit just like a standard RCM method?
@TheAudiophileMan 3 жыл бұрын
Check out my Guide here - it can still be adapted, even if you use a RCM or ultrasonic cleaner: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@itl7306 3 жыл бұрын
Excellent video, thank you! Could you comment on the Nitty Gritty FIRST rv as a treatment to new records or records in really bad shape? Thank you
@TheAudiophileMan 3 жыл бұрын
I have yet to test this one, Italo but it should work well as it's enzyme based.
@StonefieldJim4 3 жыл бұрын
Agree with all this, except the distinction between distilled and de-ionised water: a non-issue for vinyl fans.
@richardsinger01 3 жыл бұрын
There are different ways of deionising water - the best uses reverse osmosis (RO) This is the same tech as used in desalination and won’t contain bacteria. Ion exchange resins can also be used and these might potentially obtain some bacteria, but no more than might be found in drinking water. Surfactants can be used for cleaning - then we call them called soap or detergent!. Other types of surfactant have different properties. Cationic surfactants are often used as anti static agents which some record cleaners use. (Remember Permastat?) Surfactants are surface active. (Surfactant is a contraction of surface active agent). They stick to the surface of your record and help the water wet it and help it lift off any greasy deposits. Removing surfactants completely takes a lot of rinsing. Triton X is a non ionic surfactant and a mild detergent and emulsifier which should be perfectly safe to use. It will also kill any bacteria in the water. (But so would the 20% of isopropanol that I include in my solution... I know you would disapprove!)
@TheAudiophileMan 3 жыл бұрын
Thanks for the extra info, Richard. Appreciate you taking the time. Although I reckon I'll stick with the system I mention in the vid. That said, there's lots of room for research here, as you have just confirmed :) Where I'm 'at' in terms of surfactants is merely one step on a long road, I'm sure. There will, no doubt, be updates to follow in the future.
@rogerjames6956 Жыл бұрын
You might like to look into reverse osmosis water withe a tds of 0.4, {tds is total desolved solids} from a tropical fish shop and is cheap, and is maybe the most pure water.
@kingfishermoviesonyoutube 2 жыл бұрын
I use L'Art du Son and find it superb!
@TheAudiophileMan 2 жыл бұрын
Yes, that's a very nice cleaning liquid (it was my 'go to' for many years while using RCMs) but it's not a surfactant - at least it's not utilised in that manner and, if it was, there are superior surfactants out there.
@kingfishermoviesonyoutube 2 жыл бұрын
@@TheAudiophileMan Why do you think I would need a 'surfactant'? I clean my records with L'Art du Son and distilled water and rinse them in distilled water. I very very rarely have to clean my stylus so it must be doing it's job don't you think?
@TheAudiophileMan 2 жыл бұрын
The answer to "why?" is in this video. I recommend having a look at that and then getting back to me later with more questions, if you have any.
@walterpen371 3 жыл бұрын
Hi Paul. Excellent overall explaination. I've read somewhere to avoid using either Tergikleen or Ethanol as both are highly toxic. Not sure if this is true?
@TheAudiophileMan 3 жыл бұрын
Isopropyl Alcohol is also toxic to some degree, can cause dizziness if inhaled in quantity, is dangerous on an ecological level and is highly flammable and dangerous to store - yet that substance is in just about ever cheap and cheerful vinyl cleaning liquid concoction currently for sale on the Internet. Treated with respect and used properly, all surfactants and vinyl cleaning solutions are useful, if not highly effective, in removing muck and grime from the vinyl groove. You just need to apply common sense, care and attention.
@Ebaldacc 2 жыл бұрын
Hi Paul and fantastic video! I am about to get a Degritter and looking to upgrade on the cleaning agent that comes with it. At the same time, I want to keep things simple and not have to do a separate rinse cycle. That being the case, what would you recommend? Would the Ifotol be the way to go and if so, how many mil of fluid would one use to the water tank? Sorry if this is written up somewhere and if so, please point me to a link and I will go and read! Thanks in advance!
@TheAudiophileMan 2 жыл бұрын
See if this helps you, first Vincenzo: kzfaq.info/get/bejne/hLRpi5SA1Z7JhqM.html
@eduardodorantes183 2 жыл бұрын
Great set of videos! Thank you very much. My Degritter arrives on Friday along with surfactant. Once you clean your albums and put them away in a new inner sleeve is there anything else that you do to your albums before you play them on another day? Do you just take them out and play them or do you usa a anti static brush or anything like that? Thanks.
@ralex3697 Жыл бұрын
Yes
@diegoquaio 3 жыл бұрын
I live in Brazil and was able to grab the Mofi super record wash while I was in the US. I really loved the results! Now I ran out of it and don’t want to pay 60 dollars for shipping (outrageous!!!!). So I wonder if those methods you’ve taught in the video are as effective as mofi’s super record wash and if it’s suitable for vacuum cleaner machines. Thanks again, Paul!
@TheAudiophileMan 3 жыл бұрын
Hi Diego - check out my website guide, it might help: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@PlusDeltaM Жыл бұрын
Hi, Paul Love the channel, such a great resource. I'm using Ilfotol as my surfatant of choice using 1 part Ilfotol to 200 parts distilled water. What ratio of Propylene Glycol would you recommend if I added it to the solution? Cheers!
@TheAudiophileMan Жыл бұрын
H Andrew - I'd advise checking out my Vinyl Cleaning Guide on my website first. See if that helps further: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@tele-j5325 Жыл бұрын
Hi and thanks for the great video! A quick question for you. I am currently using Ilfotol, since I had already opened a container. Do you feel that a distilled water rinse is needed after cleaning in diluted Ilfotol? I know that this product is supposed to offer anti static properties as well. I'm not sure if I would be doing myself any favors by doing a final rinse. I haven't been able to find any reliable information to determine if any Ilfotol residue is a concern or not. Thanks in advance for your advice!
@TheAudiophileMan Жыл бұрын
Yes. A rinse is recommended.
@neandrewthal 3 жыл бұрын
I have been cleaning my records in the spin clean with its default fluid then running them through again with distilled water to rinse. How much improvement could I get by applying the tritonx (that one is much cheaper on ebay) first?
@TheAudiophileMan 3 жыл бұрын
Well I talk about the sonic benefits of that product in this video and the written version on my site so my thoughts are right there. Applying a surfactant directly to a vinyl surface is recommended.
@thespotlightkid1011 Жыл бұрын
My unproved thesis goes: Any post-cleaning residue would be in the most "hard to get at" nooks & crannies of the record groove's inner-wall protrusions & nodules, those nooks & crannies which water's surface-tension would protect from wetting thoroughly on an initial cleaning if a surfactant was not used. So would it not be worthwhile putting a half or quarter dose of it in the last post-cleaning rinse? ...based on the fact that the surfactant free rinse water's surface- tension would impedes the rinse, just as it would have impeded the initial clean if it were not used ...without getting too Howard Hughs about it! Just a thought. I have used 50% Isopropyl alcohol with distilled water damped onto fine camera cleaning brushes & lint-free cloth to try & wipe away what you cannot see in the groove (but I've not soacked L.P.s in it) for removing blobs of "i know not" on s/h L.P.s but i alway found extenting playing afterwards clears sometimes all, sometimes less of the grunge from whatever was dropped onto my s/h buys. I guess a stylus is just the right shape for scraping out whatever is laying where the dismond scrapes across, but it make your stylus caked in near-baked on filth quickly, as you mentioned. I'm thinking of buying a cheap linear tracking t/table with repeat, to leave dirtier sounding s/h buys, playing all night long per side, ive got many absolute fave's that cannot be got on CDs but need deep cleaning. My friends review on Chinese made Ultra Sound cleaners have not been good at all. But that was 10 or 15 years ago
@razorback-mark 2 жыл бұрын
I have been using Triton for some time now. After watching your video it sounds like I am using way too much. I have been putting a cap full (approx 10 ml) per 2 gallons of distilled water. The Triton I have is 99% so it is slightly thick and I usually warm the water so it will mix in easier. How many ml would you recommend or what would you dilute to and how much of the dilution would you use per gallon of water. I bought 16oz of the x-100 from Amazon for 26.00 US. It was listed as Biopharm Triton X100. Thanks for your informative video.
@TheAudiophileMan 2 жыл бұрын
Hi Mark - you may find my Cleaning System of use, incidentally: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/ Let me measure my Triton here. Be back ASAP on that.
@autonomousindividual7780 2 жыл бұрын
What is a pound and how many drops are there in a milliliter? Also, I'd mark those drinking water bottles of solution in case there are any children or engineers nearby. I mistakenly bought tergitol 15-s-15 while 7 or a mix of 3 and 9 is recommended. There are over 20 formulations if I remember correctly for all types of cleaning and production. Im going to try ilfotol rather than tergitol as I'm frustrated that 7 is so hard to find. In the short research I've done I'm once again fascinated at industry and chemistry. How specialized products are and 1000s of them out there. I wonder how many people appreciate that when they think they have everything figured out.
@ukzen9309 3 жыл бұрын
I followed the Tergikleen link and there are large postage and customs charges to add on.
@michaelmarr1046 2 жыл бұрын
Paul, I have a Kirmuss Audio Ultrasonic Cleaner. I do have Tergikleen as a surfactant, but want to mix it and use it correctly. The Kirmuss Audio uses close to two gallons of distilled water. Would that be 20 drops of Tergikleen? Or, should the Tergikleen be brushed I to the groves? If so, how do you mix it with glycol? Should 40mL of Isopropyl Alcohol be mixed o to the bath too? How many 5 minute cycles? How should the record be rinsed as it would have to be in a separate unit such as a spin clean. It would be amazing if you could create a step by step video on using Tergikleen with the Kirmuss Audio Ultrasonic. Thanks!
@TheAudiophileMan 2 жыл бұрын
Hi Michael - checkout my manual guide to vinyl cleaning. The first part, the preparation section can be applied to ultrasonics too. Hopefully that helps. Give me a shout if you ned more help: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@1christian1sonne1 3 жыл бұрын
Do a double surfactant test with Tergitol and Triton X-100 please :-) (50% 50% ore 40% 40%).
@alanivory8397 2 жыл бұрын
Great video thanks - just found your site and subscribed. Quiock question re Distilled water: is De-Ionised water suitable?
@TheAudiophileMan 2 жыл бұрын
Distilled is preferable - de-ionised retains bacteria.
@alanivory8397 2 жыл бұрын
@@TheAudiophileMan Thanks Paul.
@biketech60 4 ай бұрын
Thank you , I've been using the Kodak without noticing it's expiration date is well long past . Ordered Triton X-100 for longer shelf life . Will refrigeration harm it or extend it's shelf life ?
@TheAudiophileMan 4 ай бұрын
I don't recommend Triton (as per my pinned comment) because it's now been found harmful to wildlife but, to answer your question, I am not wholly sure if refrigeration has an effect because I'm not sure how exactly it breaks down and if temperature, etc is part of that break down process. One thing, talking to others, I now have a feeling that 'use by' dates on this sort of stuff are rather conservative and that liquids like this last an awful lot longer than the date on the bottle would have it.
@mrddcass6540 2 жыл бұрын
Hey Paul, I recently acquired the tergikleen which really sounds great. like your video states I'm getting excellent high mids and treble but I feel like I'm missing some lows. I'm thinking of trying the triton x-100. Have you tried using both on the same record, did that maybe bring up the lows and maintain the amazing clarity up top? Or did the sound signature change to whichever cleaner you used last?
@TheAudiophileMan 2 жыл бұрын
I haven’t but a viewer has done that experiment on my behalf and declared the result a sonic mess. So make of that what you will :)
@mrddcass6540 2 жыл бұрын
@@TheAudiophileMan thanks!
@rpirie1 Жыл бұрын
HOW MUCH DROPS OF TRITON X 100 WOULD I PUT IN A 10LITRE ULTRASONIC CLEANER BEFORE START OF CLEANING PROCESS THANKS IN ADVANCE
@royrice6060 2 жыл бұрын
In general, surfactants, ion guns, stylus cleaners, carbon fiber brushes, platter mats, micro fiber cloths, glue, disc flatteners, cleaning spray, disc washers, etc, etc…….just put your record on top of a Van Der Graaff generator. That’ll do the trick. 🤯🤯🤯(If it doesn’t try a Tesla Coil.)
@VinylPro Жыл бұрын
from my experience the best cleaning is still ultrasound !
@peterrech2307 3 жыл бұрын
Great video, Paul, question, what would be the result if one mixed tegikleen and triton x-100, in proportionally reduced amounts, together and used in record cleaning fluid. Just a thought since they both seem good but different. enjoy the music
@TheAudiophileMan 3 жыл бұрын
Good question and I have no idea, Peter. My instincts say that they would combat each other and the result would be inconclusive because of that but that's only my hunch.
@peterrech2307 3 жыл бұрын
@@TheAudiophileMan Fair enough, i have no idea either, i asked a 70yr old chemical scientist guy i sell records to about it too, and his comment was that he had no idea either, so we are going to get some tergikleen and triton and experiment on some junk albums to see. Tergikleen is a mix of tergitol 15-2 and 15-9 to make teergitol 15.7, which is ideal for records but hard to get because apparently the U.S. military has commandeered it for their use. He feels a mix of terikleen and triton might be good, but without trialing it he has no idea. will let you know....
@vincentrathbone26 2 жыл бұрын
Do you have any suggestions on how to deal with misting/frosting on records caused by those horrible thick PVC sleeves.
@TheAudiophileMan 2 жыл бұрын
You could try a surfactant-based clean. Ultrasonic would be best but a Disco Antistat would be worth a go. Again, surfactant-based.
@gwadaflat 2 жыл бұрын
Hi , Ok I finally received my Tergikleen and found my distilled water! What am I missing to clean my vinyls with the Degritter as you please? Should I also buy the Ilford Ilfotol? What alcohol do you use please? Thank you !
@TheAudiophileMan 2 жыл бұрын
Check out my Cleaning Guide for more help on this: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@ginesrodriguez8570 2 жыл бұрын
How about Tergitol vs L'art Du son? Also, how long should you leave the cleaning fluid on the vinyl before drying?
@TheAudiophileMan 2 жыл бұрын
They're really two different things. L'Art du Son was my 'go to' when I operated a RCM a while back and its a good general cleaner for those machines. Tergitol is not recommended as a stand alone cleaner. It's there to assist and aid cleaning along with other hardware and liquid tools. I would always add a rinse cycle to remove all chemicals from the vinyl surface before drying.
@CanonJoMac 3 жыл бұрын
Hi Paul, Thanks for this very interesting video. I have L'art Du Son cleaning fluid and a Okki Nokki machine. I'm willing to try surfactant, and I was wondering if I could mix it directly with my l'art du son - distilled water bottle, or should I keep the surfactant in another bottle? It would be easier if I could mix it all in one bottle, but I don't want to do anything wrong! Thanks a lot
@TheAudiophileMan 3 жыл бұрын
I wouldn't mix L'Art du Son, Joseph. You need to apply the surfactant directly to the vinyl before cleaning. Once done, you clean with the L'Art du Son.
@CanonJoMac 3 жыл бұрын
@@TheAudiophileMan Ok Thanks. I'll try it and will tell you what I think of it! Yesterday I read an article about cleaning solutions and surfactant by Michael Framer, and he claimed that different solutions/surfactants cannot sound different, since it's vacuumed before playing. What is your take on this? You seemed to think different on your video Thanks again for your videos and articles, I really enjoy it every time!
@TheAudiophileMan 3 жыл бұрын
I'm not in the business of engaging in critical debate with other reviewers. If you read my opinions on my site and view my videos on this channel, you will be easily able to gauge my opinions on the matter.
@CanonJoMac 3 жыл бұрын
@@TheAudiophileMan Oh I'm sorry, engaging a debate was certainly not my goal here. I just wanted to know why you think differently. I'll go back to your website as suggested! Sorry again for the misunderstanding, have a good evening and a good week-end Joseph
@klacke2 3 жыл бұрын
Great video. Where can I buy Tergikleen in Europe? Ebay link in video don't ship to sweden
@TheAudiophileMan 3 жыл бұрын
Have you tried: www.ebay.co.uk/itm/Clean-Vintage-Vinyl-Records-Like-A-Professional-Archivist-With-TergiKleen-New-/174068129067
@jerrythomas-cd2nh Жыл бұрын
Do you have a video for cleaning and rinsing vinyl for an ultrasonic machine?
@TheAudiophileMan Жыл бұрын
Hi Jerry - have you seen my Vinyl Cleaning Guides on my website? (theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/) They are under the Vinyl Care menu. Each Guide is...long but does feature an illustrated section to prepare your vinyl for cleaning, tools and liquids needs, proportions/quantities, etc. Part 1 is aimed at manual cleaning and Part 2 is aimed at RCMs. I've still to sort Part 3 aimed at Ultrasonics. Saying that, the vinyl prep is the same for all three so please check that out. You might want to look at my Degritter video on this channel for more ultrasonic info in terms of my approach to cleaning on such a machine.
@danielcombs3207 2 жыл бұрын
I have a question I’m planning on buying a Spin Clean or something similar. Could any of these surfactants be used with a entry level wet cleaner and make a difference in the sound quality?
@TheAudiophileMan 2 жыл бұрын
Hi Daniel - yes, check out this Guide for more info: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@stevethiel9214 6 ай бұрын
I’m confused about your use of surfactant. I use the Degritter with the Audio Intelligent Enzymatic concentrate for ultrasonic cleaning machines. I also use all of the other formulas from Audio Intelligent with my VPI 16.5 cleaning machine as a prewash. However, the records washed on the VPI are vacuumed. All records are dry when added to the Degritter. Are you adding surfactant to the record and then adding to the Degritter while “wet” with surfactant? Is this in addition to another formula that is mixed in the Degritter? Lastly, have you tested the Audio Intelligent formulas? Are these formulas “surfactants”? I purchase these through Osage Audio Products.
@TheAudiophileMan 6 ай бұрын
Audio Intelligent? Help me out in this one please, is this an enzyme-based system? I’m not that familiar with it.
@williamgordon4392 13 күн бұрын
Thanks Paul. I am going to try this. The concerns that I have are:. Does the Glycol build up in the rinse solution? Or does the alcohol break it down completely? Also, the Tergikleen: At which point does the rinsing solution become saturated with Tergikleen? How many rinses can you do before the solution should be changed because of saturation of Glycol/Tergikleen. Also, how many cycles do you set the Degritter to do (1-4), before going into Drying mode? Thank you.
@TheAudiophileMan 12 күн бұрын
Check put my Guide here and that should help you out in terms of your concerns: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/ This is for manual cleaning but the vinyl prep is till valid of a Degritter. For now? Using my ratios, the alcohol breaks it down. But don't forget the final rinse. Re. saturation, I change my bath every 30 cleans (depending on how mucky your vinyl is) and that still provides effective cleans. I do a heavy cycle with a drying mode tagged on the end of around 6-7 min.
@jedi0830 2 жыл бұрын
Hi, i know, it‘s a bit late, but did you ever try the Groovewasher G-sonic? Regards , Raoul
@TheAudiophileMan 2 жыл бұрын
I've heard of it but never used it. I'll make a note, thanks.
@ejshelby5460 3 жыл бұрын
i use the Amazon Boundless spray bottle, alcohol free, and obviously, directly sprayed onto the record, then wipe off with towel. I don't want to spend the $$$ on a machine, so I wonder how to just use one of the surfactants?
@dylanhunt1529 3 жыл бұрын
any idea what's in the Kirmuss surfactant other than 99 part distilled water 1 part propylene glycol?
@TheAudiophileMan 3 жыл бұрын
I never found out because the company never actually told me but it really doesn't matter because it performs badly under comparative tests. I don't recommend it at all. Spend your money elsewhere.
@jonathanchau-chiu2893 3 жыл бұрын
Loved this one! I got recommended L'art du son record cleaning fluid when I began this hobby and have been using it with my ultrasonic cleaning system ever since. Have you had any experience with this cleaning fluid? I'm curious how it compares to just a pure surfactant. Thanks for the content!
@TheAudiophileMan 3 жыл бұрын
Hi Jonathan - when the Loricraft RCM was my go-to cleaning machine, L'Art du Son was my go-to liquid but I no longer use it, I'm afraid. If it works for you, that's great though. I wouldn't personally compare that with surfactant, the latter is something I would use with a cleaning liquid, as an adjunct.
@cooker4000 3 жыл бұрын
Hi, whats your cleaning regime with the degriter whilst using tergikleen please
@TheAudiophileMan 3 жыл бұрын
Although this website Guide is aimed at manual cleaners, the preparation of the record and the core techniques are the same for my Degritter use - give me a shout if you need more info: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@josephpetrosso4178 2 жыл бұрын
Hello, would you ad a few drops of any of the surfactants to the water as in the Humminbird ?
@TheAudiophileMan 2 жыл бұрын
I find adding surfactant to a ultrasonic bath is good - it does help - but it's not as efficient as applying it, diluted, directly to the vinyl surface and facing that surfactant into the grooves with a Kabuki brush. Check out this Guide, the first - what - 14 steps I think, also applies to ultrasonic cleaners: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@MrDjoness 3 жыл бұрын
Tergikleen recommends 10-20 drops per gallon (I guess us gallon 3,8l) => 3-5 drops/liter and you used 10 drops/liter. How com did you use so much more cleaning fluid that were recommended?
@TheAudiophileMan 3 жыл бұрын
Trial and error and sound testing afterwards. But you're welcome to use less if you wish, of course. Also, just so I don't paint myself into a corner here, that's where I'm at right now. I try to tweak and test constantly so may change that in the future depending on other variables.
@slistone1940 3 жыл бұрын
Did you end up doing the Part 2 video on how to use surfactants with ultrasonic cleaners?
@TheAudiophileMan 3 жыл бұрын
Do you mean a vinyl cleaning 'how to'? Not yet. Recently published Part 1, manual cleaning, on my site. RCMs will form Part 2 and Ultrasonics will be Part 3.
@gordont.8958 3 жыл бұрын
Great video. Thank you. How do you spread the diluted surfactant on the vinyl.?
@TheAudiophileMan 3 жыл бұрын
Hi Gordon - hopefully this Guide will be of use: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@gordont.8958 3 жыл бұрын
@@TheAudiophileMan Thank you Paul.
@Nosh_Feratu 3 жыл бұрын
to anyone else wondering, as I was.....the answer is . .a kabuki brush!
@arshadmuzaffar8520 3 жыл бұрын
Paul, Based largely on your recommendation I have just bought a Degritter . I've used it for the first time today. My question for you is regarding the use of cleaning solutions with this machine. The importer here in the United States says he uses only distilled water in his machine. No other cleaning solution. Based on your research, what do you recommend as a best practice? Lab grade or other very pure distilled water only or add the supplied cleaning solution to it or some other surfactant? Thank you!
@TheAudiophileMan 3 жыл бұрын
Hi Arshad - in broad terms (I hope to provide more detailed website reviews and KZfaq videos later), I use distilled water and 7% alcohol in that bath. On the vinyl itself, I use a Tergitol surfactant and Glycol mixed into that. The latter keeps the Tergitol in the grooves because gravity wants to pull it off :) That's why I use 7% alcohol, to melt the Glycol off the grooves. If I wasn't using Glycol, I'd only need 1% alcohol to do the job. You don't need much alcohol and too much is aggressive to the disc. I know...all of that sounds very confusing but I hope to explain all soon. You're welcome to ask questions if you need to, of course.
@arshadmuzaffar8520 3 жыл бұрын
@@TheAudiophileMan thanks very much Paul! Happy new year. Do you think regular distilled water from the grocery store or pharmacy it's OK, or should one use laboratory or reagent grade distilled water?
@ashdutta2102 Жыл бұрын
Great talk. Very easy to understand. However, too much talk. The messages could be much better understood if the talk was delivered with less words.
@nick3795 3 жыл бұрын
Great review, Tergitol is available on eBay in the UK, 5ml of Tergitol 15-S-3 and 5ml of Tergitol 15-S-9 for £5. The seller does suggest that 2 drops of each to be added to 2 Litres of a 4 : 1 mix of distilled water and rubbing alcohol! It does sound a bit heavy on the Isopropyl...
@JtBrown-el4xt 3 жыл бұрын
The seller recommends that no alcohol is used because it destroys the tergitol.
@TheAudiophileMan 3 жыл бұрын
Here's my Guide for manual cleaning - although it can easily be adapted for RCM and ultrasonic cleaning too: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/ Any questions, pleases shout.
@garethrichards9572 3 жыл бұрын
A question if i may regarding triton x-100. I have heard that this product does not mix well in distilled (or any) water, unless both triton x-100 and the water are heated first. Can you confirm this?
@TheAudiophileMan 3 жыл бұрын
That's not my experience, Gareth. If that was the case then the performance changes I was hearing would either not be there at all or would be too subtle for me to notice or the changes would be there but would be too small to make an impression. I haven't tested the product with heated water, I have to say but I was impressed with Triton's performance in cold water.
@garethrichards9572 3 жыл бұрын
@@TheAudiophileMan thanks for your reply. My triton x-100 is on its way from ebay using your link. One more question if I may. I have also ordered some 99% isopropyl alcohol. Do I mix triton x-100 with a small amount of alcohol and distilled water before cleaning (with my spin clean) or just triton x-100 and water?
@lions903 3 жыл бұрын
Dear Paul, love your KZfaq channel, but don't always have the time to watch enough of it as I am running my own business. I am about to purchase a Degritter on the basis of your review and my own research. However, I am a little perplexed by the procedure you recommend for it. I am also a bit unsure about what liquids to purchase. Is there a document I can download that will deal with these issues? Keep up the good work.
@TheAudiophileMan 3 жыл бұрын
Thank you, Arthur and yes, there sure is. Read this Guide and I'm sure it will help. It's aimed at manual cleaning but everything before the actual use of the Disco Antistat is valid for the Degritter. The materials used, vinyl preparation, etc...
@lions903 3 жыл бұрын
@@TheAudiophileMan Which guide - can't see a link to one?
@TheAudiophileMan 3 жыл бұрын
@@lions903 Here you go: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
@JamboLinnman 2 жыл бұрын
@@TheAudiophileMan Hi, just read your helpful guide. Any tips for applying the surfactant to the second side of the record prior to putting it into the Degritter? Do you just flip the record over and lay the wet side on a protective surface like a microfibres towel or do you avoid the first (wet) side coming into contact with anything somehow?
@inko123 3 жыл бұрын
Can you this in combination with a non-surfactant cleaner like liquid l'art du?
@TheAudiophileMan 3 жыл бұрын
I would say no. One would fight the other. It’s an either/or thing I reckon.
@lampron58 2 жыл бұрын
Do you add anything else with the surfactant ? I’m most likely to use a spay bottle
@TheAudiophileMan 2 жыл бұрын
Hi Robert - this Guide may provide more information on how I integrate surfactant into my own routine: theaudiophileman.com/vinyl-cleaning-guide-part-1-manual-cleaning/
The Audiophile Man
Рет қаралды 67 М.
Spatula City Records
Рет қаралды 36 М.
Mancave Central
Рет қаралды 108 М.
Channel 33 RPM
Рет қаралды 21 М.
JOON Italian
Рет қаралды 2,4 МЛН
Brother-live_mob
Рет қаралды 879 М.
Immersed
Рет қаралды 109 МЛН
notebook-31
Рет қаралды 110 М.