2013-16 Genesis Coupe 3.8 (BK2) Alphaspeed ECU & TCU tune Deep Dive / Explanation with Dyno Graphs

Рет қаралды 2,593

Күн бұрын

BK2 38 Alphaspeed Canned tune ECU and TCU explained in detail
www.btrcarcustoms.com/collect...
0:00 Intro
0:41 BK2 38 ECU Tune
2:40 Octane Level Importance
5:38 Pop and Bang (Burble) Option
7:37 Launch Control Option
8:41 Immobilizer (Key or Push Button)
9:43 Pre-Tuned ECU option
13:14 Dyno Sheet BK2 38 Automatic (Intake / Cat Back / 93 oct)
14:51 Dyno Sheet BK2 38 Manual (Full Bolt on / 93 oct)
17:01 BK2 38 TCU Tune Explained
18:58 Outro

Пікірлер: 21

@godzilla7391 Жыл бұрын

Good video. I'm still new to all this. I have a 3.8 bk2 , with Borla exhaust, obx headers, and Injen intake. My next step is the tune, then maybe in about 6-8 months get the internals done, and supercharge. Can't wait. This was a very informative video. Ty

@luisnunez5726 Жыл бұрын

Amazing video!!! Very detailed and informative! I have a 2015 Hyundai Genesis Coupe BK2 3.8 auto and will definitely invest into TCU tune for my automatic!! Right now I’m running the AlphaSpeed Custom Tune ECU on 93 octane with pops and bangs. Definitely worth it!

@andyrodriguez6192 11 ай бұрын

how is the tune holding up on your car?

@jeffreyrivera2755 Жыл бұрын

I'm very interested in getting my bk2 3.8 tune, only mods i have are manifold riser, ark dp, test pipes, and sri. Was told i would need an afr gauge if i wanted a custom tune and would only gain 4-5whp vs canned tuned. Will i feel a noticeable difference with just a canned tune? Tranny is manual

@BTRcarcustoms Жыл бұрын

Canned tunes produce significant gains and are definitely worth trying out

@beeswaxx3.8 Жыл бұрын

If your oem ecu is tuned for 93 octane and happen to travel to another state with only 91 available, can you still pump 91 and keep the rpms lower for no detonation? If so, what's the max rpm you can safely rev to on 91, if you're tuned for 93? Would you say 5-6k rpm instead of 7k?...or depends on the car?

@BTRcarcustoms Жыл бұрын

Worst case and you HAVE to do that, you should not use more than 30-40% throttle input

@husamothman1 8 ай бұрын

For 3.8 Genesis 2015, will a TCU tune make all upshifts and all downshifts smooth especially 2-3,3-4 and 4-5 shifts that are currently rough and want the shifts smooth and at 1.5 or 1.75 to 2 k RPM upshifts shift points for low gears? Is that stage 1 or 2?

@BTRcarcustoms 8 ай бұрын

If anything the shifts will feel rougher as they firm up and become faster

@bayareanativechochenyo Жыл бұрын

I have a question. If I have an SFR ecu tune, could I purchase an Alphaspeed TCU tune to be used with my SFR ecu tune? Thank you!

@BTRcarcustoms Жыл бұрын

We cant guarantee that will work together

@bayareanativechochenyo Жыл бұрын

@@BTRcarcustoms Understand, thank you!

@sinner3919 Жыл бұрын

What’s the difference between TCU and ECU, sorry I’m new to this

@BTRcarcustoms Жыл бұрын

TCU tunes your transmission, ECU tunes your Engine :)

@mitchfarmer5117 9 ай бұрын

Where’s all the love for the 3.8 sedan?

@BTRcarcustoms 9 ай бұрын

www.btrcarcustoms.com/products/alphaspeed-canned-tune-ecu-service-2009-genesis-sedan-genesis-g80-3-8?_pos=3&_sid=ef5b827c7&_ss=r

@vladsamsonov894 Жыл бұрын

What’s the best rpm for the 2step/launch control for the most pops

@BTRcarcustoms Жыл бұрын

3500 usually seems like the sweet spot for good sound

@autotech2736 3 ай бұрын

If my state sells 92 octane should I chose the 93 option

@BTRcarcustoms 3 ай бұрын

No you want to choose the 91 option

@autotech2736 3 ай бұрын

@@BTRcarcustoms thank you for getting back to me I love the Channel and the work u guys do for the platform GC