Well! No nonsense, straight to the point. This must be the best tutorial video i have seen in a long time. I subscribed 👍 Thank you .

Meanwhile, in my world…..go to home center and discover they don’t have all the needed pieces in ABS or PVC, buy many elbow combinations of each, go home, still doesn’t work. Go back to home center, buy more stuff, repeat 4 more times, cut multiple lengths of pipe to make everything fit because the first 3 pieces were too long or too short. Take a break for dinner. Make sure no one uses the sink. Still doesn’t fit. Go back to home center and buy multiple universal kits with the bendy hose.. jury rig everything together , check for leaks, redo do 2 more times because there are leaks, tighten every connection just short of failure, no leaks, stand back and admire a job well done.

If this is really for beginners then I would recommend dry fitting everything before glueing a single piece. But a nice video. Well paced and easy to understand.

I’m a 60 yr woman, beautiful explanation, and yes I did it ,

Great video. And finally someone understands background sounds that help you focus. Thank you.

I probably don’t “like and subscribe” as often as a should, but this tutorial was so clear and straightforward, I had to. Well done, sir.

Great video. Wish this video was around when I remodeled my kitchen. Installing the P trap was frustrating.

On top of the great content (exactly what I needed), I really enjoyed the calmness (and music) and simplicity of your presentation. Too often videos are amped up and this was a delightful change. Subscribed!

As others have mentioned, great video tutorial that is straight to the point! This is my first video of your channel that I have viewed, and if the others are like this, then you just gained a new subscriber! Thank you for making quality videos !

Great video. After watching it I have complete confidence I can do it without screwing it up. Thank you!

Very well done video! No wasted time, and no quickly skipping over the essential material. 👍🏆

Thanks so much😊 This is very helpful. Solves leakage problem I was having under kitchen sink👍😊

Not bad. The only thing that bugs me is that you didn't ream the inside of the cut pipes to ensure smooth flow. Little jagged ABS pieces can easily cling onto hair and start to cause clogs over time.

very good video with great explanation and workmanship. nice dry fit process to align the offset drain to the sink. thank you.

EXCELLENT video. I've never had to deal with a 2" black pipe coming out of the wall like this before where any glueing of pieces was involved. Old house, new "opportunity" for learning I guess. This video was amazing!

Drains being offset from the sink are most common, even in newly built homes. But it is not a problem as you can see by this informative video.

Amazingly well done and just what I needed. Thank you!

I'm helping my Mom out by installing two new vanities and sinks that are both smaller and offset from the old ones she had. This is the exact problem I wasn't exactly sure how to fix properly. This gave me all the confidence I needed to get it done! (Not a plumber. Just handy with things and a Son trying to help his mom save some money) Thank you for this excellent tutorial! Love it.

Love the soothing music. Forgot i could chill out while I'm doing this

I work at Home Depot plumbing department and at least couple times a week I have to explain this very process to DIY customers, some understand it right away others I have to go over and over and over this process. Great video 👍🏻

Excellent job. Plenty of education in this video. Just subscribed and so should you!

Thanks, this really helped me fix my sink faucet thingy.

Excellent video and very diligent work ethics. I appreciate your hard work, time, and dedication. 🙏

Dealing with that problem now. Very usefull video ! THANKS !

Thank you for making these videos. Saves me a lot of money so I don't make someone else Rich and rob me blind.❤😊

Certain portions of plastic pipes are threaded to allow you to tie one segment to the next. This eliminates the need to glue one part to the next which is best avoided if possible. It will make it easier to take apart and reassemble if you need to clean out debris causing the drain to clog.

Good work, straight to the point.

Min Min you sure know how to do it!!! Just gorgeous! 💖😘💖😘💖😘💖😘✨✨✨✨

Excellent demonstration. This is needed on most sink jobs and sometimes surprisingly frustrating to resolve.

Straight to the point. I am presently facing this situation and you answered my question simply and easily. Off to Home depot for that 45. I was not aware of the slope requirement. Thank you

Hope everyone noticed he used a " 1 1/2 " trap with a ground joint union. Well done

Good Job. Very easy Illustrations.Thanks alot.

Thanks, you saved me a bunch of grief. The new rough in put the drain line more than 5" offset from the drain, I'm not sure why they did it that way, they had the utility sink for reference. I was trying to find fittings that would reach that far and had not considered using a bend to make an offset.

Amazing video. You went over every single thing I needed to know. It’s also awesome to watch a professional at work, you make it seem so easy! As a DIYer I like how you held both pieces in one hand and the glue in the other. Will definitely do that next time instead of fumbling everything around since I don’t have a method lol.

Best offset plumbing video!

your video is well explained but I was not aware of the slop. and most, you demonstrated a drain that is not in line with wall outlet and the p-trap connection.; that is very common. thanks and God Bless

Nice clear explanation. Thanks for posting.

Great background music choice. Gives an interesting atmosphere 😊

A contractor that did my new vanity install "fixed" this problem by adding an s trap directly below the drain and having that go to the old p trap. I'm tired of it clogging so I'll have to give this a try

GREAT TO THE POINT VIDEO.

Excellent video...Thank you.

This is great! Thank you.

Just got a quote from my plumber for this exact job and it’s $222. I get the “special” price because I’m a member. After watching this, I’m getting brave enough to take another crack at it thank you for making this video!

Great video, thank you very much, it was most helpful and achieved the best outcome, God bless!

Oscillating tool a must have, saw not used often as this useful tool.

thak u little idan man

Exc instructional video thanks for posting

You helped me big time Ty

Imagine being rich enough that you didn’t have to watch a KZfaq video to fix something yourself.

Great video, thank you. Subscribed, liked and saved to favorites.

Perfectly informative video and very pleasant music. 10/10 new sub.

Wow... I need to show this to my hardware store.

very informative video, very well explained.

Great video! Having a problem with the threaded end of the p trap leaking. Teflon tape, pipe dope or silicone seal? What do you suggest?

Very, very good. Well done.

Thank you, thank you, thank you my friend!

Thanks guy .. solved my issue.

Nice clean job. Very pretty.

Thank you sir. I was about to have an ulcer over this exact issue.

Thank you! this was helpful

Very informative tutorial, loved it. Background music......not so much. L0L. subscribed.

Thank you.very nice video.just perfect.

Excellent! Thank you. 👍🏾

Very well done vid. Thanks

Thanks for the video!

Great info…THX

that helped big time thanks

Holy moly! Super helpful!

See you put cement on both sides. Yesterday my worker was only putting on one side, saying its the same. Now I'm going to show him this video 🍾

Great video. So I have the same offset issue where a 45 is needed but with PVC. So could I do this by building out from the sanitary T as follows: 1) sanitary tee, 2) stubout, 3) street 45, 4) marvel connector, 5) PVC ptrap kit, 6) sink drain tail? Thanks!

Great video!!!

BLESS YOU SIR

I have to preassemble and paint marker the pipes. The order that you glue I guess makes a difference.

awesome job 👏👏👏

its obvious he is a pro, I can tell by the glue he uses

excellent videovideo

This is exactly my problem. I'm so inexperienced I didn't know 45bends are available. Back to town again tomorrow. Oh right, can I borrow your reciprocating saw? And extra batteries. And a 6-pack of Speights, ta. 12pack I mean.

Good job!

Very usefull. I really appreciate.

Thank you !!! Just subscribed.

I thought people were moving away from abs ? Also I have to make new p trap design for my sink which was built in the 90s. how do i tell tis abs or pvc. the writting on the side verse not? or plastic apperance?

Can you comment on why you used a trap adapter between the sink and trap instead of the standard tail extension with nut?

Great video, thanks

Pretty good

Thank you

I loosened the union at the threaded connection to clean out the pipe, but the two pipes are stuck. Any suggestion?

Vet good tutorial, I appreciate the video, if you do not do this all the time you forget things and cut corners by using flex ( I hate Flex) so Thank you Very much.

What is the square plug on the wall? Can that be removed if you need to use that instead of the drain above? If so, how do you remove it, and can you swap the plug between the two?

Hello what's the chain under the sink. Is that to reinforce the underground sink. If so what is it and where purchased

Thank you very much.

THANK YOU

Great video, sure looked like mustard

Awesome video!! I’m having a similar problem I just did a kitchen remodel and the 2” drain pipe coming out of the wall is now a lot lower than it was before and the trap won’t fit without notching the floor of the new cabinet. Does anyone have a work around so we can avoid notching the cabinet? Thanks in advance

Accordion pipes r the easiest 2 assemble! But must have a removable clean out filter with it.

Hi. I can't find the 45 angle that fits on the drain pipe you are showin. When I type in 45 degree it gives me a larger elbow looking one. Would you be able to tell me the exact name of that small piece?

Very nice how to! Also, flexible drain pipes work wonders I found out haha

Thank you very much for share your knowledge. It help me a lot 🤝🏼👍🏻 You got a new subscriber 03-29-2024 🍑🇺🇸

Very nice job

Great video

What determines whether you would use ABS or PVC, is it the drain pipe? Also, are there benefits of one vs. the other?