Ford Transit Connect 2018 Broken Key Repair HOW KA, Ranger

Рет қаралды 132,940

4 жыл бұрын

This video will show you how to fix broken Ford keys that are the newest with the UK. On this 2018 Ford Connect, the key had already broken!
The video shows you how to open the old key, transfer the parts into a new key shell.
We recommend having the key blade cut, simply because Ford keys wear very quickly compared to other car keys we see, not sure why|!
However we also show how to swap the blade from the old key.
If you need a new case and pin removal kit, please follow the Amazon link below
Click Here amzn.to/2NKQmS9
Thanks for watching
Affiliate Disclaimer
Links on this website may lead you to a product or service. They provide an affiliate commission to the owners of this site should you make a purchase. In no way does any affiliate relationship ever factor into a recommendation. Nor does it alter the integrity of the information we provide.
Please note that we have not been given any free products, services, or anything else by these companies in exchange for mentioning them on the site. The only consideration is in the form of affiliate commissions

Пікірлер: 84

@gregorysmith1750 Жыл бұрын

Video was a great help! My key wouldn't stay closed but thanks to this video I was able to safely disassemble the fob and fix the flip mechanism.

@TheCarKeyMan Жыл бұрын

Great stuff Gregory, glad it helped and thanks for watching :)

@victorvalenzuela7626 4 ай бұрын

You’re the best ever! You saved me hundreds of dollars. I totally wish u could tip you

@TheCarKeyMan 4 ай бұрын

Hi, you’re very welcome. These keys are pretty terrible to be honest, we see a lot that are broken after just a few years. Leaving the feedback really helps the channel so thank you :)

@jeffabney4111 3 жыл бұрын

Was able to repair my Ford F 150 key by using your instructions. Bought a new key from e-bay, took out my old circuit board and installed it in the new key, switched the new (uncut) blade with the blade from my old key and it works! I had the same problem with it not flipping out correctly when you press the button as you mentioned in the video, but it works and will serve well as an extra key! Thanks for your video!

@TheCarKeyMan 3 жыл бұрын

Hi Jeff, thanks for the feedback. Yes there does seem to be a problem if you swap the blade over. It's as if the flip mechanism gets damaged just in swapping the blade. To be honest the keys are a complete disaster

@josevelazquez2086 2 жыл бұрын

Do you know what size is the star screw so i can get a bit?

@Ryan-qe9ih 2 жыл бұрын

@@josevelazquez2086 T-6

@jason91205 Жыл бұрын

Exactly what I have needed and was looking for! Thank you so much

@TheCarKeyMan Жыл бұрын

You're welcome jason, glad it helped :)

@magikfreek44 Жыл бұрын

This video saved me hundreds of dollars, thank you so much

@TheCarKeyMan Жыл бұрын

That's great news Sarah :)

@show305time4 10 ай бұрын

So you didn’t show how you pop the blade(key) in place?

@twincamspit 2 жыл бұрын

Brilliant, cheers! Nice and clear, worked a treat

@TheCarKeyMan 2 жыл бұрын

You're welcome, thanks for the feedback :)

@popsfishing 2 жыл бұрын

thanks this was helpful on how to open the key fob!

@TheCarKeyMan 2 жыл бұрын

Great stuff, really pleased it helped you :)

@delcapslock100 Жыл бұрын

Thanks so much. The metal piece in the back that hooks to a key chain had popped out somehow, and wouldn't snap back in without taking it apart following your instructions.

@TheCarKeyMan Жыл бұрын

HI, yes I'm starting to see this. Bit of a poor design that it can coome out so easily. Thansk for the feedback :)

@jorel6745 3 жыл бұрын

Well done!

@TheCarKeyMan 3 жыл бұрын

Thanks, hope it helped :)

@dronehawk Жыл бұрын

Thanks . Great video

@TheCarKeyMan Жыл бұрын

You're very welcome, thanks for watching :)

@762jeremy Жыл бұрын

Thanks for the video. I'm going to attempt a flip key shell swap next week. Both my keys have a broken hinge. Doesn't seem too bad judging from your video. Let's hope it goes OK.

@TheCarKeyMan Жыл бұрын

Hi, thanks for watching. The only real issue with the swapover is that the replacement cases aren't great. Godo luck ;)

@762jeremy Жыл бұрын

@@TheCarKeyMan Hey there. I did the swap over a few days ago. You're right, they aren't great. The roll pin hole on my new key didn't line up correctly with my old blade. Ended up having to drill the hole out just slightly. Lock button is also a little stiff. However, it's ok. I can live with that. Better than paying for new ones. Thanks again for the video. It helped a ton. :)

@jacknicholas6189 2 жыл бұрын

Hey, great video man! Unfortunately the same issue has happened with me, just wondering if you have an updated link for a bare replacement key and for the tools for it? Thanks😁

@mattmunhall8372 Жыл бұрын

You just saved me $300 as Ford was very adamite about needing a whole new fob. I will see about ordering the exact fob for my vehicle do this! Thanks again!!!

@TheCarKeyMan Жыл бұрын

You're welcome, Matt, glad it helped you and thanks for watching :)

@ford-2009 2 ай бұрын

Hi there, is the chip now integrated into the circuit board on older models it was a glass cylinder thing , thanks great video

@jeremiahbolin6821 Жыл бұрын

Thank you! The second of my Ford Fusion's keys broke the same way (same issue withy the first). Any tips for how to pop out and re-insert the pin holding the key blade? Attempted once, but could not get the pin reinserted on my first key replacement attempt?

@TheCarKeyMan Жыл бұрын

Hi Jeremiah. Will they are a bit tricky just because the pins are quite short. The hardest part is keeping the pin still while applying pressure with long nose pliers. Have you tried that?

@JarredSalas 3 жыл бұрын

Do you have a link for the pin at the end? Broke the metal part of key need to just replace it

@TheCarKeyMan 3 жыл бұрын

Hi, I am away at the moment, I'll have a look when I'm back of my holiday

@rebelramirez Жыл бұрын

Thanks this video saved me 580$

@TheCarKeyMan Жыл бұрын

Really! Pleased it helped :)

@oliverpedder-platt9629 4 жыл бұрын

The link for the new key doesn't seem to be working, do you have another one?

@TheCarKeyMan 4 жыл бұрын

Hi Oliver, oh sorry,will have a look at that today

@Plumbdiiqk Жыл бұрын

If you do this replacement do you have to reintegrate the key with the vehicle as in does it just go back to being a key for your specific vehicle or will it have to be recoded?

@TheCarKeyMan Жыл бұрын

Hi, it will still work fine ;)

@user-lb7xp1vn7m Жыл бұрын

Can I just take the back piece that includes the old circuit board and put it into my new fob? Bypassing the removal of the circuit board itself?

@TheCarKeyMan Жыл бұрын

Ho Trevor, what fault do you have with your key?

@soxnpats4lyfe Жыл бұрын

100% of the reason this happen is the pin is holding a channel on the keyblade instead of the pin going through a solid hole on a massive torque point for the key..

@TheCarKeyMan Жыл бұрын

Hi Ryan, yes really poor design by someone....

@davidvalentin9144 3 жыл бұрын

I cannot find the new case and pin removal kit on amazon and your link does not work.

@TheCarKeyMan 3 жыл бұрын

Hi David, sorry, email me at thecarkeymanUK@gmail.com and if you still need one I can help

@simpson1704 Жыл бұрын

Is there any way to swap out the shanks from the old key into the new keys flip mechanism?

@TheCarKeyMan Жыл бұрын

Hi, the old blade will come out of the flip mechanism, but you may need to modify it to fit into the replacement case

@Truthcanbeconfusing 3 жыл бұрын

@thecarkeyman how big is that screw?

@Ryan-qe9ih 2 жыл бұрын

T-6

@MobileTech296 Жыл бұрын

Can you buy just the spring clip piece that the blade goes into? Since that's all that really broke it seems kind of wasteful to have to buy a whole new shell. Still so much better and cheaper than trying to get a new one from Ford though.

@TheCarKeyMan Жыл бұрын

Hi Ken. Well the problem is that Ford don't just sell this part. If you buy a replacement case and just use that part from it, it probably won't work because it's made slightly different. But give it a go

@Link-ji7kx Ай бұрын

Would you guys have any idea how to replace the silver handle part on one of these? (The part where the ring goes) I have a spare handle, I just can't seem to get it on. Thanks!

@TheCarKeyMan Ай бұрын

Hi, I’m sure the silver part should be moulded as part of the case, so not sure you can swap this, sorry

@noeezy1 17 күн бұрын

@TheCarKeyMan might be late, but the silver ring handle comes out cause mine did and I had to pop it back in taking the fob apart

@JoseSanchez2243 4 жыл бұрын

I have a 2016 ford fiesta and my key broke.. the remote works fine, but I have to use my spare key to turn on my car.. can I just buy a shell that has the key and move all the components from my working remote onto it ?

@TheCarKeyMan 4 жыл бұрын

Hi Jose, is it a flip key?

@JoseSanchez2243 4 жыл бұрын

@@TheCarKeyMan no

@TheCarKeyMan 4 жыл бұрын

How did the key break? Is it just the blade? Does it look like the key in the photo?

@JoseSanchez2243 4 жыл бұрын

@@TheCarKeyMan the blade broke.. it was inside my backpack when I fell of my bicycle and when I checked the blade had broken off.. the remote still works, but I have to use a spare key to turn on my car.. my spare doesnt have the buttons it's just a key

@cameronserle 4 жыл бұрын

The trouble with the the new car keys, the pin is very skinny and it brakes very easy, usually it takes about 4 to 6 months to brake. I'm surprised it lasted a year.

@TheCarKeyMan 4 жыл бұрын

Hi Cameron, yes I agree, pretty poor. Did yours break?

@cameronserle 4 жыл бұрын

@@TheCarKeyMan I don't own a car yet. But I work with car keys. And the newer models always breaks.

@TheCarKeyMan 4 жыл бұрын

Agree, they are really poor quality now. Thanks for the reply ;)

@rcaltamira 11 ай бұрын

how can i program a new key fob for a transit connect 2019 ?

@TheCarKeyMan 11 ай бұрын

Hi, it needs to be done with a laptop

@TheRandjbutts 8 ай бұрын

What size star screw driver do I need?

@TheCarKeyMan 8 ай бұрын

Not sure, sorry

@jamesstumpf75 Жыл бұрын

Where do you find Such a tiny torque screw

@TheCarKeyMan Жыл бұрын

They are a funny size, I haven't seen them anywhere other than part of the key

@Truthcanbeconfusing 3 жыл бұрын

What torqx size

@TheCarKeyMan 3 жыл бұрын

Morning, sorry I'm not sure

@stevewhite7649 Жыл бұрын

What size torque bit????

@stevewhite7649 Жыл бұрын

What size torqx bit

@Busalacchi0420 Жыл бұрын

A few comments above someone replied that it is a T-6

@Busalacchi0420 Жыл бұрын

I have to do this to mine so I will find out tomorrow

@saz6511 8 ай бұрын

This has happened to me. My keys currently all taped together 😒

@TheCarKeyMan 8 ай бұрын

Yes, they are not very good I'm afraid :(

@BK-hl2lh Жыл бұрын

Dam ive spent $500 past yr on 2 of these junk key replacements. Next time ill buy one of these and give it a knock

@TheCarKeyMan Жыл бұрын

Yes they are terrible keys.....

@shawnbeaus2505 8 ай бұрын

But there's a chip...

@TheCarKeyMan 8 ай бұрын

The chip is mounted on the circuit board, so when you swap it, the car will stil start

@katanwahab7490 2 жыл бұрын

I had this bad experience .What bad quality crap not even covered by 1 year warranty.. What a bunch of crooks want $320 for a new key..

@TheCarKeyMan 2 жыл бұрын

Hi Katan, yes I believe these keys are bad as soon as you get them out of the packet. There is too much wobble in the blade assembly in my opinion, compared to most other keys