Interchangeable jig kit- how to use

Рет қаралды 18,535

Күн бұрын

After many questions about the use of my kit, I decided to make a new video and go over the steps needed to create the jig setup. You can use this kit and make your own jig files or download them from my Etsy store if you choose. I have many common jigs in my store and create more as they are requested. The kit provides an efficient way of mass producing items on the XTool D1. I also have made a couple of more kits for other machines that I have access to. The jig kit will work on the new D1 Pro as well.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/shop/TheClackShack
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
XTool: www.xtool.com/?ref=TheClackSh...
Comgrow: comgrow.com?sca_ref=2392321.3THJ0z0mmv
D1 10 watt bundle that I have on Amazon: amzn.to/3sJRPMC

Пікірлер: 148

@brentshepard3925 26 күн бұрын

Someone recommended this video for some coasters I’m making. Saw you are from Chilton County. I’m down in Autauga! Small world.

@TheClackShack 26 күн бұрын

I am about 2 minutes from Autauga County… hello

@nooneshero9819 Жыл бұрын

I just asked about this a night or two ago with you. This is a great example on perfect customer support and a very good business person. But even beyond that just a good human being in general. Thank you and keep up the great content.

@TheClackShack Жыл бұрын

Thanks… I hope it helps

@jacknick429 Жыл бұрын

He’s a good guy - that’s for sure !!!

@johnmarksbury1633 Жыл бұрын

Great files! I will be using these jigs on my black and red co2 laser as well. Thanks very much for all of your work.

@TheClackShack Жыл бұрын

I should have a CO2 soon. Thanks

@stevedonalson5675 Жыл бұрын

Getting jiggly with it! Nice design!

@TheClackShack Жыл бұрын

Thanks

@rockymtnmovies Жыл бұрын

Terrific idea. Just getting started with all of this, but love this. Thanks for sharing!

@TheClackShack Жыл бұрын

Thanks

@cuttingchaosdesignssvgsand189 11 ай бұрын

Thank you for this video and for creating the file! This is great info.

@TheClackShack 11 ай бұрын

Thanks, glad you like it. It makes my work easier

@highperformancebassboats Жыл бұрын

What a time saver. Thank you for your help. You rock!

@TheClackShack Жыл бұрын

Thanks

@jacknick429 Жыл бұрын

This system ROCKS !!!

@TheClackShack Жыл бұрын

Glad you like it...

@projectpursuer Жыл бұрын

Thank you for the time and effort you put into this system! I just bought an xtool D1 used and was getting ready to design a fixture system in fusion 360 when I ran across your videos. I just downloaded the files for your jig this past weekend and will cut them this week.

@TheClackShack Жыл бұрын

Very welcome!

@projectpursuer 11 ай бұрын

I downloaded and just finished burning the honeycomb jig adapter everything work like it should now I just can't wait until the honeycomb gets here...lol

@patrickjames3954 Жыл бұрын

I love this system. I made my jigs out of 6mm MDF to make the jigs more stable.

@TheClackShack Жыл бұрын

Nice

@cubansli3099 Жыл бұрын

This is very helpful, thanks for your hard work man. I just getting started since I retired now. I have an Atom stack could afford the D1, but some day. Anyway thanks for the idea. Godbless Sir

@TheClackShack Жыл бұрын

I have an Atomstack P9 M40 also

@skamp69ab Жыл бұрын

This looks like an awesome system! I don't have a dedicated laser engraver, but my 3018 cnc will take a diode laser. I may try to come up with a comparable system that will work with it. Thanks for your great videos, you explain everything very well

@TheClackShack Жыл бұрын

Good luck!

@SteveTrueloveInspiredtechlife Жыл бұрын

Great video!!! Thank you!

@TheClackShack Жыл бұрын

Glad you liked it!

@mikerugenus6919 Жыл бұрын

I like to use the square jig when I'm cutting pieces out. That way I can take the piece out and if any pieces didn't cut all the way I can just put it back and run another pass or two knowing it will cut exactly on the line again. . Thanks for making this. Saves a lot of aggravation

@TheClackShack Жыл бұрын

That is a good use of the kit. Thanks for sharing

@georgeheleine5209 Жыл бұрын

Nice video!

@TheClackShack Жыл бұрын

Thanks

@veteranowned1609 Жыл бұрын

You should add numbers to your jigs for the snap locks - it would help to align the jigs in future. Just picked up my first xtool D1 20 watt and look forward to checking out your jigs. Cheers!

@TheClackShack Жыл бұрын

I have considered it but if you don't use numbers, it would just increase the burn time. The end user could add them easily enough. Good idea though

@wayneJohnsPhotographer Жыл бұрын

This is a great idea…..I have the foxalien masuter Pro machine, would be great to have something like this on there.

@TheClackShack Жыл бұрын

It makes a difference..

@brandimagistro1770 Жыл бұрын

Great ty!!!

@TheClackShack Жыл бұрын

I hope it helps

@aegisinstitute912 Жыл бұрын

Excellent setups. Suggestion -- why not remove the locking extensions on the top stackable piece? still get extra strength, but without extra difficulty of removing jigs. You could use those special dowel rods to align them when gluing them. Also, you could slightly modify several locking tabs (maybe reverse them to be eadily seen) to ensure only one place to lock them in. This could be an updated version of your files for new people. I have a different laser, but this is great for those that have the XTool.

@TheClackShack Жыл бұрын

I have revised the design since and it makes it stronger and easier

@videoscrapheap Жыл бұрын

Suggestion: Add numbers to the teeth on the locking panel. Then, once you install a jig panel for the first time, pick one of the numbers on the locking panel and write that number and an arrow by the corresponding slot on the jig panel. That way you’ll always be able to get the jig installed at the same place.

@TheClackShack Жыл бұрын

Not a bad idea, I usually just use a marker to make timing marks.

@nctplarry Жыл бұрын

LOVE this idea! I think I'm gonna burn a new version of mine that I got from David, except go in and add numbers to the teeth. Shoot, what would it hurt? 🙂

@jimg4300 Жыл бұрын

Do I cut on insied ,outside, onside , on shpes path , or inside sapes path?

@rhaepers1 Жыл бұрын

This is awesome! Pre ordered a D1 Pro 20W with the extension. Can this jig be mounted in the front also? or just the back?

@TheClackShack Жыл бұрын

They antenna gets in the way on the front. I guess if you removed it maybe

@rhaepers1 Жыл бұрын

@@TheClackShack I do remember you mentioning that in a previous video. I just figured with the extension rails id work more from the front. Will figure it out once i get it. Thanks! Love the vids!

@brettvk4bde Жыл бұрын

Hello I have the Two Trees TTS-55 laser. How hard would it be to modify any of the jigs to suit my laser. Thanks love your video's. Brett

@TheClackShack Жыл бұрын

The locking panel would need to fit the legs of the machine. Everything else is not machine specific

@thehillbillyhermit7681 Жыл бұрын

For a person just starting out, which would you recommend? the Neje 3 or the comgrow? I'll be learning all the basic engravings including tumblers and glasses

@TheClackShack Жыл бұрын

I prefer the closed frame of the Comgrow. The only thing for tumblers is the limitations of the rotary. For larger tumblers, you will have to get creative or use a different rotary

@tek9102 Жыл бұрын

I am very new to lasers. I bought your jig kit and am planning to burn it tomorrow. Do you have any tips or instructions to make it easier? Love your videos and am looking forward to using them. Tom

@TheClackShack Жыл бұрын

Search my content for keyword- JIG, lots of videos

@tek9102 Жыл бұрын

@@TheClackShack thanks

@tlott2370 26 күн бұрын

Do you have the templates for the D1 Pro? I looked on your site but didn't see any. I also use XCS for my program. I would like to do coasters, leather patches, round coaster, squaring jig and maybe a few other. Appreciate any assistance you can provide.

@TheClackShack 26 күн бұрын

The D1 and D1 pro are the same frame. I have the kit in SVG format which can be imported into XCS. XCS didn't exist when I built this.

@amateur87 6 ай бұрын

Hello, any video about how to make a jig locking panel?

@TheClackShack 6 ай бұрын

No need, I sell the file on Etsy….lol

@stevestiverson5677 4 ай бұрын

Quick question, when you are burning your jig panels, what do you set them on? If you put it on the honeycomb then it's not level with the locking panel. I am using the Wizmaker L1.

@TheClackShack 4 ай бұрын

I have my honeycombs set up and they are level with my cutting surface.

@johncorbin355 Жыл бұрын

Do you have a video on how to lineup the jig in lightburn? Once I have the circle jig locked down - is there a trick to quickly line up the job? Im trying to wrap my head around it but once you have the first one dialed in the rest are good (if your using the jig as the template in lightburn) right? I made the jig into a tool layer in LB then Im having to move that around to frame the first and not sure how to tell if its good, 1/8" off on the first translates into all the rest being off yes?

@TheClackShack Жыл бұрын

This is about as detailed as it gets. If you use the files that I make, you should be really quick. You have to snap it all together then burn the holes and save the file. kzfaq.info/get/bejne/l756eKiBsLzVhZc.html

@williamrainey5279 Жыл бұрын

Once you make the jig in Lightburn and convert it to a tool path is there a way to save in such a way you can lock it to prevent changes?

@TheClackShack Жыл бұрын

There is a lock function, right click on the object and it is in that menu

@dennishall8090 Жыл бұрын

Three Questions: How does this work when using the XTool Honeycomb Grid work with the Jig? Can you do a #2 Pencil Jig for engraving pencils for my grandchildren's names? Does the file come with the settings for positioning the XTool to cut/engrave in those locations or do you have a video of the entire process, especially the computer screen? Thank you in advance! Hope I bought the correct files in the Etsy Store as waiting for the D1 Pro 20 W that I exchanged for the D1 10 W. Hopefully mid-August....

@TheClackShack Жыл бұрын

Yes, Yes and yes for some types of jigs. The honeycomb holder / adapter is needed for using the honeycomb. I have a video op me creating and using many jigs. Just search my channel with the key word jig. The process is simple.

@AwesomeFuture777 11 ай бұрын

Can you use this with, or do you have files for the Comgrow Z1? Thanks much for all your videos!

@TheClackShack 11 ай бұрын

The original machine, yes. kzfaq.info/get/bejne/mJOTfbiny5nDk2g.html

@TheClackShack 11 ай бұрын

kzfaq.infotvTcKvl3n6g

@AwesomeFuture777 11 ай бұрын

@@TheClackShack thanks for the quick response brother. Are there cutouts for the feet of the Z1, or is something else holding it in place. I see the 2 back feet sitting in the template but not sure if they are actually sitting in cutouts in the jig. Where can I find one of these kits as well? Thanks again for your kind help

@Fdip813 Жыл бұрын

Waiting for the arrival of the d1 pro 20 w hopefully this week, I would like to know what type of wood is best to use for the jig?

@TheClackShack Жыл бұрын

As long as it is sturdy and won’t break, it isn’t material specific. I use 4.5mm plywood

@Fdip813 Жыл бұрын

@@TheClackShack thank you.

@JordanBurnett-mf4yn 4 ай бұрын

Just nabbed the file with much appreciation. You mention the suggestion to make it out of acrylic which seems like it only has benefits. However, I notice you continue to make yours out of wood. Any reason to use wood over acrylic? Thanks!

@TheClackShack 4 ай бұрын

Wood is cheap

@JordanBurnett-mf4yn 4 ай бұрын

@@TheClackShack Bahahahaha. Well played, sir. Very well played.

@dbrimmage237 Жыл бұрын

I love your jig system. But, Is it really necessary to have this many tabs for alignment. Seems as though the smaller the tabs, the more fragile they are.

@TheClackShack Жыл бұрын

That is true but so far, I have only had one break and it was due to a void in the material. I have a newer version that I have improved upon in the making for future builds. The only issue is that changing the design will basically render older jigs unusable. I will likely move over to my latest design on my next kit. I may re-release the jig kit update for the other machines.

@dbrimmage237 Жыл бұрын

I bought the jig kit even before I bought my xtool. Looking fo tge upgrade

@portugeeprepper6821 Жыл бұрын

Can I extend the jig panels, cause I have the extension bed kit for the d1 pro

@TheClackShack Жыл бұрын

I also have a jig extender that allows you to snap several together if needed but yes, you could. kzfaq.info/get/bejne/i5iha9iZkt7Jip8.html

@mikeledee8786 Жыл бұрын

When you setup your jigs, do you always home your laser head, top left to start all your projects?

@TheClackShack Жыл бұрын

Yes,

@mikeledee8786 Жыл бұрын

@@TheClackShack thanks

@nancyruiz5164 10 ай бұрын

Sorry, newbie with dumb question: Can I use this jig system with a honeycone?

@TheClackShack 10 ай бұрын

yes, The jig kit needs to be able to sit flat on the surface of the honeycomb. Either recess the honeycomb or space the machine up.

@robr4379 8 ай бұрын

Hello how are you doing I just got the D1pro and am interested in making jigs for it to make thing easier just wondering if this is something that can be done with xtool creative space and what would did you use exactly and what is the size and thickness? Thanks

@TheClackShack 8 ай бұрын

Yes, with XCS you will need to use the dxf format but it will work

@TheClackShack 8 ай бұрын

4mm or thicker for rigidness

@robr4379 8 ай бұрын

Ok thanks for the info BTW I'm new to this is dxf format easy to find/ figure out

@robr4379 8 ай бұрын

Is there a certain place you found 4mm + thick wood so far everything I find is 3mm

@bucknboard Жыл бұрын

How do you use the squaring/alignment jig with pieces that extend beyond the frame of the XTool. Example : 24 inch long cutting board where you need to engrave in lower left of the board?

@TheClackShack Жыл бұрын

Rotate it 180 degrees so that the burn is on the top, then orient the text accordingly (Upside down). That is why my engraving enclosure has a passthrough. You are limited to about 20 inches width to fit between the legs.

@TheClackShack Жыл бұрын

kzfaq.info/get/bejne/bNOjp7WitqfOp5s.html, look at 8:43, that is a passthrough for what you are talking about.

@bucknboard Жыл бұрын

Thanks! Assume I would do the same if the burn was to be in lower right of stock. It would end up being too left of jig? I’ll check out the video. I don’t use Lightburn, only XCS if that helps

@bucknboard Жыл бұрын

I was of course overthinking this. Thanks again- got it figured out (for now)

@phaleen Ай бұрын

Will this work in the wecreat?😊

@TheClackShack Ай бұрын

With the Wecreat, you can make jigs without a locking mechanism. You just need item files.

@dailydrivendomestics7317 Жыл бұрын

Would you happen to have a jig file made for the extension kit or can this one just be stretched to work for it?

@TheClackShack Жыл бұрын

I made an add on that has male and female connectors to extend the current setup

@dailydrivendomestics7317 Жыл бұрын

@The Clack Shack heck yeah that's awesome I just ordered a extension and your jigs seem to be the go to. I watch all you videos for great information. Thank you

@mgervais10 Жыл бұрын

This may be a stupid question. Can we use your jig system with the honeycomb?

@TheClackShack Жыл бұрын

The only thing is to make sure the kit has a flat surface. I created spacers to fit the XTool honeycomb that makes it work with it

@richcauwels4897 11 ай бұрын

Is there a video about how to use these with Lightburn?

@TheClackShack 11 ай бұрын

Several. all I use is lightburn. kzfaq.info/get/bejne/r6xnrdGgydfaoJc.html

@richcauwels4897 11 ай бұрын

@TheClackShack do have where you don't have a camera? I don't have one, and I don't plan on getting one.

@TheClackShack 11 ай бұрын

@@richcauwels4897 same process just takes framing using a tool line

@TheClackShack 11 ай бұрын

@@richcauwels4897 camera isn’t required if you frame

@richcauwels4897 11 ай бұрын

@@TheClackShack just have to guess the pre-cut squaring position until you hit the mark and then save as.

@jimc31 Жыл бұрын

What size wood sheets do you use?

@TheClackShack Жыл бұрын

I buy 4x8 full sheets and rip down to 16x16 inch squares.

@stevenwagner4790 Жыл бұрын

What are the grid settings? I imported the file in it goes over the grid??

@TheClackShack Жыл бұрын

Not sure I understand what you mean by grid settings? If you mean that it is larger than your work area, something isn’t right. The files are made to fit in the work area of the machine that they are for. I have lots of different files. Some are a collection of burns but are intended to be tool lines until you are ready to cut

@randyrowles1932 Жыл бұрын

What thickness wood do you use for the templates?

@TheClackShack Жыл бұрын

4.5 mm is my go to for most everything

@randyrowles1932 Жыл бұрын

@@TheClackShack Thanks

@joshuacrom7121 Жыл бұрын

Once I cut the jig out and use a different jig, how do I make the Xtool go back to the original jig? Does it need to be set with absolute coordinates? I've made jigs in the past and never could get it to center exactly where it was before. I gave up and made paper jigs. Once I cut a 4x4 square out of paper, do the coaster right then without moving the laser head. I'm probably overcomplicating it. 😆

@TheClackShack Жыл бұрын

Change cut line to a tool line. The jig panel has to be locked into the locking panel. I have multiple videos demonstrating

@TheClackShack Жыл бұрын

You cut out all the parts, snap them together, cut the shape, change cut line to a tool line. Your done just save that file as a jig template.

@grammybear4226 Жыл бұрын

referred by cog hill farm

@TheClackShack Жыл бұрын

Thanks for stopping by...

@rigopulido4897 Жыл бұрын

Question are these words on the xtcs?

@TheClackShack Жыл бұрын

Not sure I understand the question..

@rigopulido4897 Жыл бұрын

@@TheClackShack tha jigs work only for ligt burn, or they also work whit xtool created space?

@phaleen Жыл бұрын

Super dumb question here. Where can I find your jig file, the top one. 🤔 thanks!

@TheClackShack Жыл бұрын

My Etsy shop, here is the link. I also have some ready made files that will help with making the jigs for some common items. You can also make your own files and just use my panles. www.etsy.com/TheClackShack/listing/1229695807/jig-kit-for-xtool-d1-interchangeable?Copy&ListingManager&Share&.lmsm&share_time=1660494868160

@Fleshybitz Жыл бұрын

What wood do you recommend for the jigs?

@TheClackShack Жыл бұрын

4 mm or thicker plywood. you can use thinner but it may warp

@Fleshybitz Жыл бұрын

@@TheClackShack I need to purchase some so 6mm will be good I figure

@TheClackShack Жыл бұрын

@@Fleshybitz plenty thick enough

@jamesshelton9126 Жыл бұрын

Is the kerf counted in these?

@TheClackShack Жыл бұрын

It is designed with the cut path of an XTool D1 in mind but also to be taken apart if needed.

@kempyfx242 7 ай бұрын

What type material is that you're using?

@TheClackShack 7 ай бұрын

I use 1/4 inch plywood.

@christopherstaton8940 Жыл бұрын

Ordered this off Etsy, downloaded and I have 1unit. 1 piece not what I see in the video. I ordered the pieces for the corners and got this 1 piece again.

@TheClackShack Жыл бұрын

If there was an issue, message me from your order. All the files are in the appropriate location in the store.

@ChuckWashington-pv5jk Ай бұрын

Hey man my name is Chuck Washington I bought the jig kit but I only have 12x12 wood and I did not get the dig tag jig or any of the jigs please help I live in Mobile use to live in Calera Al.

@TheClackShack Ай бұрын

Not sure which kit you are talking about. Most can be adapted to 12x12 using the bolean tools

@ChuckWashington-pv5jk Ай бұрын

The Xtool D1 pro 20w square jig for 11.75 x 11.75 wood

@peterjones7789 Жыл бұрын

What is the thickness of the material you use for your jigs?

@TheClackShack Жыл бұрын

Typically 1/4 inch. About 4.9 mm

@peterjones7789 Жыл бұрын

@@TheClackShack thanks!!!!

@christopherriley403 Жыл бұрын

i am not understanding something. once i cut out a blank jig and lock it into place to cut out the template. i set everything up on my laptop in Lightburn to make the template. but each time i goto frame the template INSIDE the jig area...the crosshairs always go off of the jig...meaning the template wont be entirely on the sheet of wood/jig. what am i not understanding or doing wrong?!!!

@TheClackShack Жыл бұрын

All my designs fit on a 16x16, most can fit on a 14x14. Make sure its not a tool line causing it.

@christopherriley403 Жыл бұрын

@@TheClackShack I understand what you are saying and have watched your videos numerous times. My jig template is roughly 12" x 6" (including the teeth) that leaves me plenty of room for a 4" diameter circle template. Yet for some unknown reason my machine/software wont allow me to frame the circles in the area I want to cut out the circles. (I hope I'm making sense....I'm not a word worm and do better communicating via pictures/videos)