Fixing Hack Rust Repairs on my 67 Mustang | Part 1 Cutting the Frame

  Рет қаралды 2,156

The Daily Drift

The Daily Drift

Күн бұрын

Today I am going to work on fixing the rusted out radiator support and frame rail under the battery tray in the 67 Mustang. This is a long process and it took me a lot longer than I expected. This is gonna be a 2 part series so stay tuned for the final results!
-
🔰 Don't forget to Subscribe: goo.gl/2SdRG8
-
🔧Special Tools needed for this job 🔧
My Angle Grinder: amzn.to/3iRoomX
My Air Hammer: amzn.to/3oxRyed
My Mig Welder: amzn.to/3BpZzpr
My Drill: amzn.to/3iwHgYb
My Body hammers: amzn.to/3lh0gvD
My Laser Level: amzn.to/3l8lFXr
Clamps: amzn.to/3FeEi4a
Propane Torch
Disclaimer
I am an Amazon Associate and I receive a small commission if you choose to purchase tools or parts through my links. They don't cost you any extra and it helps us to continue creating more fun videos like this one.
-
Time Stamps
00:00 Evaluation of the rust damage
02:15 Removal of the front suspension
05:15 Bracing the frame before cutting it
07:24 Cutting the fender apron and radiator support
08:36 Important measurements before cutting the frame
11:00 Cutting the Frame
11:48 Measuring the frame patch panel
13:25 Cutting the frame patch panel
-
My videos are for entertainment purposes and not for expert automotive advice. I am definitely not an Automotive expert.
I like to show the struggles that most channels make look easier than they really are. I build our cars inside my garage with the limited tools I have available. I hope you still find my failures entertaining and have a great day!

Пікірлер: 5
@77bigpinto
@77bigpinto Жыл бұрын
Gotta luv these old Mustang projects, I am 65 and about to start a 65 coupe, basically same condition as your 67, good vid, keep em coming, will follow.
@Stahodad
@Stahodad Жыл бұрын
Nice work Man!
@thyubernoob
@thyubernoob 9 ай бұрын
Those spring spacers were used way back in the days to raise the front end when the springs started getting saggy...
@errolpoxleitner7901
@errolpoxleitner7901 Жыл бұрын
Some times boring is good
@davidwright873
@davidwright873 Жыл бұрын
Who you calling an A hole....A hole!! joking....so much work....iv'e been there done that...
1968 Mustang Front Frame Rails and Core Support
15:27
Heavy Metal Customs
Рет қаралды 5 М.
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 20 МЛН
УГАДАЙ ГДЕ ПРАВИЛЬНЫЙ ЦВЕТ?😱
00:14
МЯТНАЯ ФАНТА
Рет қаралды 3,9 МЛН
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 2,4 МЛН
Nastya and SeanDoesMagic
00:16
Nastya
Рет қаралды 20 МЛН
2 SIMPLE HOMEMADE TOOLS That Millions Of People Don't Know
10:37
Welding Mask
Рет қаралды 10 М.
TORNO CNC #cnc #cncrouter #máquinacncmaquina #fresadocncm
8:09
How I Restored the Door/Windshield Pillar & Kick Panel on my 67 Mustang
27:24
The Most Underrated Upgrade For A 67 Mustang
17:39
The Daily Drift
Рет қаралды 1,5 М.
1966 Mustang Fastback | Undercoating & Rust-Proofing
12:37
Slow in Fast out
Рет қаралды 4,9 М.
The Comprehensive LS Engine Building Guide from Start to Finish
49:42
The Daily Drift
Рет қаралды 181 М.
I'm Restoring a 67 Mustang, What Could Go Wrong?
26:59
The Daily Drift
Рет қаралды 2,4 М.
Duster Custom Dash Part 1: Frame and Dash Pad. DIY Custom Dash.
14:10
Злая Ауди vs Пассат! Оживление корча и заруба на треке!
1:28:47
ИЛЬДАР АВТО-ПОДБОР
Рет қаралды 1,4 МЛН
зил
0:32
Karol tv
Рет қаралды 1,1 МЛН