How To 3D Print Gears Like a Boss

Рет қаралды 469,888

Күн бұрын

▶Kindly consider supporting me: www.thehardwareguy.co.uk/memb...
Polymax Polycarb UK: amzn.to/47h1Ulp
Polymax Store US: amzn.to/3NJwxJq
3D printing has revolutionized the way we think about gears and gearboxes. With the right knowledge, you can now 3D print gears and 3D print gear mechanisms that are functional and reliable. One of the best things about 3D printing gears is the ability to adjust the gear ratio to match the specific needs of your project.
When it comes to the strength of 3D printed gears, there have been many concerns in the past. However, the strength of 3D printed gears has significantly improved with the advancements in materials and printing technology. With the right combination of material and printing process, 3D printed gears can be just as strong as traditional gears.
If you're looking to get started with understanding gears and mechanical principles, 3D printing gears is a good place to start. You can learn how to design 3D printed gears using popular CAD software like Fusion 360, which has a gear generator tool available as a plugin called ‘GF Gear Generator’. Alternatively, you can use FreeCAD to design 3D printable gears.
When it comes to materials, Polymaker Polymax PC is a popular choice for those looking to 3D print gears. Polymax PC, with its high strength and durability, is perfect for printing gears with 3D printer.
In this video I talk to you about how to design and 3D print gears that are optimised for strength and durability. This is based on my experience with 3D printed gears during my Raptor 2 project. I discuss the various types of gears available such as spur, helical and herringbone. I also discuss the importance of print orientation when 3D printing gears. This video is sponsored by Polymaker. I used PolyMax Polycarbonate to 3D print the gears shown in this video.
To summarise, with the correct tools and materials, you can easily 3D print a gearbox or 3D print a planetary gearbox that is functional and reliable. Whether you're just starting out or looking to improve your existing designs, the options for 3D printing gears are endless. In addition to the advice that I provide in this video, don't hesitate to experiment with different materials, like ‘Polymaker's Polymax PC Max’ and ‘PolyMaker PolyMide’.
00:00 Intro
00:45 Why I Designed and 3D Printed Gears
02:10 How To Design Gears
02:33 Different Types of Gears
04:04 Importance of Print Orientation
05:48 Re-enforcing Smaller Gears
06:06 Full set of Printed Gears
06:28 Which material should you use?
06:53 PolyMax Polycarbonate
07:26 Sponsor - Thank you!
07:56 Bearings and Lubricant
08:12 Outro
08:35 Support Me
#3dprinting #CAD #gears
Sign up for my newsletter: www.thehardwareguy.co.uk/subs...
----------------------------------------------------------------------------------------
As an Amazon Associate I earn from qualifying purchases.
If you purchase via my links, I receive a small commission, at no extra cost to you.
▶Hair Spray:
UK: amzn.to/3rmEKoM
US: amzn.to/3tVcJ9s
CA: amzn.to/3tSUQrP
▶WD40 Silicone Lubricant:
UK: amzn.to/31fT73G
US: amzn.to/3d1gT96
CA: amzn.to/3tTY5zw
----------------------------------------------------------------------------------------
▶My Links:
Website: www.thehardwareguy.co.uk
Instagram: / hardwareguy_
----------------------------------------------------------------------------------------

Пікірлер: 374

@lio1234234 3 жыл бұрын

Also, if you plan on driving offroad, I would definitely recommend swapping the herringbone gears for some doublehelix gears. Any dirt or substance that gets into the gears gets dragged into the centre and quickly binds up the gears, the double helix solves this because there is a gap for the dirt/grime to be pushed into. :)

@lio1234234 3 жыл бұрын

Also, yes there is a difference between herringbone and double helix. And that is what I listed in the above comment. A herringbone is simply a specific type of double helix gear :)

@thehardwareguy 3 жыл бұрын

Excellent point. Maybe an idea for Raptor 3 ;)

@DrewTeter 3 жыл бұрын

Question. If dirt and grime is push up one direction on a helical gear, would going in reverse push the grime in the other direction? And, if so, could you orient a herringbone gear to push grime out of the center when the car drives forward? (Since it will be going forward 90% of the time)

@rcaviator8408 2 жыл бұрын

Same with those outrunner motors. They dont really like dirt. Some sheilds would be a good idea.

@amorag59 2 жыл бұрын

@@lio1234234 He mentions this at 3:39..

@imonseii1436 3 жыл бұрын

I would recommend going 95% in stead of 100. reason being that if you have a tiny bit of overextrusion in your printer, this will compensate, and avoid outer layer blobbing, as this will make the gear teeth nearly unusable, or at least time consuming to clean up. Another reason is that when force is applied to the structure there is nowhere for the force to distribute if it's all solid, but with tiny gaps the material has a tiny space to deform slightly, mitigating some of the force running through it.

@bloogaming8827 2 жыл бұрын

Good idea! Might also be worth printing the outer perimeters first

@MOOBBreezy 2 жыл бұрын

If you have over extrusion, try adjusting your e-steps

@butre. Жыл бұрын

this hasn't been an issue in a long time

@jr764 Жыл бұрын

You’re right at the first part, but the part about forces distributing is complete nonsense. A 100% solid part will always take more load than something that is not 100% solid

@guillaumelebreton3780 Жыл бұрын

@@jr764 Well, not always. For example, for parts that have an angle that is less than 90° have ofter an circle cut off where the angle is, because if not forces will rip the material where the acute angle is. When you cut off a circle in place of this angle, you will make a better repartition of forces and hence avoid ripping. So by removing some of material you can actually make it stronger.

@TomBertalan 3 жыл бұрын

I really like this focused-collection-of-findings format. Not so much a "tutorial" that focuses on one project (just one point in a design space), but an attempt to report on how to generalize a particular technique. It would be nice if other maker-focused youtubers adopted such a format, so we could have a library of such hard-won info, organized not by integrated project but by technique.

@BrownMInc 2 жыл бұрын

I often ask the question why hardware/mechanical design can't get the same kind of love / support that electronics and software does. I generally thought maybe it's too specific in nature but you're right this video communicated generally

@TheKrzyh 3 жыл бұрын

Excellent delivery: - calm, but not boring - informative, but not overwhelmingly Thank you for the video! Really enjoyed it.

@steveneltringham1478 3 жыл бұрын

Love your content - no egocentric b.s. Just the interesing stuff. Coming up for reirement I bought a 3D printer and Wow! You don't even have to leave the house to go on a big adventure. Been subbed for a while and come to you first when I want facts. Please keep it up, you're a terrific teacher.

@thehardwareguy 3 жыл бұрын

Thank you for the kind words Steven, much appreciated👊🏻 I agree, it is incredible what we can do from the comfort of our homes these days!

@Shubham-po2tp 3 жыл бұрын

Please tell me is 1:1 greas tevhinel

@Ibian666 2 жыл бұрын

I learned that there are different types of gears and why some of them are stronger than others. Good to include this sort of thing.

@Der6FingerJo 2 жыл бұрын

Great Video! I`ve also landed on Polymaker PC Max after experimenting with Taulman Alloy 910 before, but i never put as much care into it as you. But i can vouch for their durability - i made a inner gear ring design that transferred the power of 3,5kW motors on an electric mountainboard and the gears never failed!

@dzee9481 3 жыл бұрын

One thing I like is how you go from the drawing board to design the part and going to the manufacturing, where you describe how you went through the analysis of on printing the part and provide details around each of the components needed to be reviewed and looked at having the proper parameters to print the parts that would be under a large amount of stress. Typical most people would just print the parts and slap it on the RC vehicle and do not understand why the plastic part broke. I like to see how you would design a part and go through the process of printing that part on a 3D printer and what methods you use to make sense to print the part so that it would print as you would expect it to be.

@rogero9633 3 жыл бұрын

I greatly appreciate your taking the time to experiment and examine the possibilities of printing gears on a 3D printer. I have been thinking about the use of 3D printed gears in the future. My hesitency is due to the problems one gets into when producing them by any other method and comparing those issues with using various materials and 3D printing of gears. 3D printing is a new and experimental area of fabrication and so much simpler. Since it is possible to design any gear one can think of on a CAD program and rely on a 3D printer that is sophisticated and accurate enough to produce that design - well this is fantastic as I can see it. And that is the key to this - the CAD program and accurate 3D printer technologies. I didn't know if they had become available yet. I"m glad to see people like you are able to prove the subject. I will subscribe and follow along to see what develops in your shop. Thanks. PS. One shortcoming that I is a problem for me is that I'm not good at creatively designing a roubst gear shape using the CAD programs. I have tinkered about with some of them but I have not become proficient with any versions yet. I was hoping that by waiting for some period that some design libraries would become available to satisfy my experimentation curiosity. Good luck to you for experimentations that produce the quality that satisfies both of our needs. Bye for now.

@paulcrabb7167 2 жыл бұрын

Really impressed by the engineering detail packed into this video - learned a lot.

@kevinm3751 2 жыл бұрын

Great tips, I found using nylon filament is better for strength and its much more forgiving and does not chip nearly as much as other filament I tried.

@williambyrnes4198 3 жыл бұрын

I like the fact that you are using roller bearings for your gears that are in direct contact with the motor. There is no need to use ball bearings because the forces acting on the gears in radial not axial. Plus like you said you will get less wear.

@shahederharoutunian2789 3 жыл бұрын

Wonderful video! Might I suggest a solution your axel strength issue? Add fillet between your axel and the gear face if you have enough room, even a small 2-3mm fillet can exponentially reduce the stress riser created by that shoulder. Excellent work!

@JL-rx6bz 2 жыл бұрын

Thank you so much for the video on how to 3d print gears! Very straight to the point and but very detailed.

@erichuff3135 3 жыл бұрын

*Engineer here* You're mods for strength and print clarity are next level. If you are not already a CAD drafter, you should consider it. Some companies do not require a FE to draft.

@snorttroll4379 Жыл бұрын

What search terms does one use to find the jobs?

@erichuff3135 Жыл бұрын

@@snorttroll4379 CAD drafting

@falconrising5138 Жыл бұрын

@@snorttroll4379 Designer or Drafter, but more often search for the CAD software name (Solidworks, Creo, Fusion360, etc) for the best results. (I used to be one).

@michaelwhisman2479 3 жыл бұрын

Solid video, thank you for the awesome information. You gave me some more ideas for the mini extruder I am trying to build. Thank you

@yinyuetrifecta 3 жыл бұрын

This is seriously so helpful. Thank you!!

@Koomoa 3 жыл бұрын

This was an amazing video, keep them coming !

@rockpodd 2 жыл бұрын

Im really glad i found this channel. A mastermind and easy to understand. Cheers m8.

@charlesguerin4901 2 жыл бұрын

Excellent advice, very well presented and scaffolded. Thank you!

@dorinissenbaum4195 3 жыл бұрын

Hi, great video! Really liked the design and the comment about splitting the shafts! From your experience - what module of the gears worked best for your printer - how small can you get? Any suggestions for the glues used on the splitted shafts?

@marsgizmo 3 жыл бұрын

wonderful project 👏😎

@gregdabrat 3 жыл бұрын

oh hey :)

@paulmaydaynight9925 3 жыл бұрын

keeping a spare nut or to on the heated bed and filling that when you purge can be fun & produce useful quick generic bits after smoothing too, dip your old stranded wire in dissolved scrap plastic and stick that in your bolts as a core infill etc, etc..

@MiroslavKastak 2 жыл бұрын

After I builded 2 cars form 3Dsets I thinking about to design my own RC car and because I want to make some type of crawler, this video is realy helpful for me. Thanks a lot ! 😊

@vasiliyklx450r 3 жыл бұрын

Great tips I learned today! Thank you, chief!

@JPLashOriginals 2 жыл бұрын

Very informative, I learned more about 3D printed gears in ten minutes here than in my entire mechanical design program at school.

@GBCobber 2 жыл бұрын

Nice build. Good advice. Just a note Herringbone gears are actually quite a bit stronger than helical, because the teeth have that corner in the middle.

@rusticagenerica 2 жыл бұрын

Really happy I discovered your channel ! Fantastic advice !!

@errorgd 3 жыл бұрын

was having problems with axles as well, but my solution was using nylon. less hassle than glueing them together ;)

@xboa721 2 жыл бұрын

awesome info. brought me up to speed so fast. thanks. great tip on the fusion add on. Cheers.

@Suzeno00 2 жыл бұрын

Very nice, I like your way of thinking! I will take it into account in my projects. Thank you 😉

@PanosMesi 3 жыл бұрын

I 3d printed a speedometer gear with ASA for my Honda transalp 650 two weeks ago and until now it works flawlessly. Let's hope it lasts. Let's see. Nice video 👍

@robmurg 3 жыл бұрын

Great video, thank you. I seem to recall that the Citroen badge is based on the herringbone gear which they pioneered the use of in production cars.

@GregorShapiro 3 жыл бұрын

That is true!

@jeffmcmahon615 7 ай бұрын

Well done. Thanks mate. I appreciate the gear info.

@chrisnurse6430 3 жыл бұрын

Great video with perfect level of detail

@paigashaona2331 3 жыл бұрын

I'd suggest trying PC+PBT for the gears. It's available from Push Plastic, and probably other places. It's got the good strength from PC, but also has added self-lubrication features, and is a bit more ductile which might help on shock. I've had luck printing it on a PCB-heater bed, with an all-metal E3D V6, with just a trash back over my printer to keep the heat in. xD

@evanlane1690 2 жыл бұрын

Love the reinforcing technique!

@alishanmao 3 жыл бұрын

Thank you for this video. I learned a thing or two :D today.

@colinfielder6695 3 жыл бұрын

Thanks for this. Great job and very informative

@Paul-rs4gd 3 жыл бұрын

Thanks very much for such an informative video. I'd love to see a video like this about belt drives and 3d printed sprockets too.

@thehardwareguy 3 жыл бұрын

You're welcome Paul, thank you for watching!

@FullPowerPillock 3 жыл бұрын

Engineering wise I highly agree with your advice on stronger gears. The only other thing that could possibly help is breaking down the gear reduction over multiple gears, similar to a counter shaft in a gearbox or planetary gear set. Or though given that it’s rc applications it would be a rather tight fit in a chassis.

@carlosjosejimenezbermudez9255 3 жыл бұрын

Nylon works beautifully with gears too. Taulman 910 has given me amazing results.

@rivergranniss3740 3 жыл бұрын

Build an enclosure for your printer, upgrade hot end as needed, put in a direct drive, and print in PC (Polycarbonate). When tuned right the results are genuinely incredible. Extremely strong.

@pogi1803 3 жыл бұрын

Can this be done on and Ender 3 pro? Very brand new to the 3d printing world.

@TheHotwhells 3 жыл бұрын

@@pogi1803 of coruse it can be done on any printer but it needs its personalised modifications

@pogi1803 3 жыл бұрын

Awesome!! Thanks!!

@rivergranniss3740 3 жыл бұрын

@@pogi1803 my printer is an ender 3 pro

@rivergranniss3740 3 жыл бұрын

@@pogi1803 upgrades will take time and money however. To print PC you'd need an all metal hot end like the micro swiss, or if you want a direct drive extruder as well get a hemera. You'll need to make some changes to your firmware to accommodate the new hot end. Get an enclosure for the ender 3 on amazon. I'd say that's the minimum requirements

@NullHyp 3 жыл бұрын

Having experimented with 3D printed gears playing with the OpenRC F1 car (by D. Norée), I have to say, Herringbones are definitely way to go for 3D printing. They’re substantially quieter too.

@NullHyp 3 жыл бұрын

Love your content by the way! Subscribed ✅

@master-gbig1140 3 жыл бұрын

Very interesting; I love what you did with the smaller gears by driving a screw through the center to reinforce them "along-the-printed-layers". However; since you have such a keen insight into the structural integrity of printed parts I was wondering why didn't you try the same thing with the dog-bones as you did with the smaller gears? Never the less; you are, definitely; someone to look forward to watching on youtube. Vantastic workmen ship and thank you for your brilliant insight on gears.

@chrisf8584 8 ай бұрын

I know your Q was from years ago but I think he didn't need the support on the larger gears because they rotated at a much lower RPM so reinforcement wasn't needed.

@dabunnisher29 10 ай бұрын

This was very helpful. Subscribed and thumbs up.

@natcole2629 2 жыл бұрын

great video. Going to need to watch your others on modelling gears in Fusion 360. Newbie for this sort of thing.

@Brocknoviatch 3 жыл бұрын

I spent a lot of time 3D printing the truggy off of thingiverse in ABS+ and the differential gears and drive train couldn’t handle the loads. I considered using polymaker pc max but it was far cheaper to use metal drivetrain using common parts. I use a ABS+ herringbone gear connected to a metal diff, and ABS+ herringbone gear that attaches to the motor and they work great! I have also enclosed those gears so they don’t get dirt in them as well! I love the tips for the shaft and gear and also the m3 bolt!

@SianaGearz 3 жыл бұрын

What is "ABS+" really? If it's actually ABS, then it's usually plain not suitable for gears and such mechanisms because it flakes off, it doesn't have much abrasion resistance whatsoever. Maybe it's modified with reduced butadiene amount, it might be good, as butadiene is introduced as a flake onto which graft polymerisation of styrene and nitrile occurs, which are introduced as gas, and this butadiene is on the one hand flexible, on the other forms spots at which the material can separate. If it's a modified PLA with plastifier additives, which i think one manufacturer had such misleading naming, then that's stronger, but has another issue, because the temperature resistance isn't great, and friction generates high local temperatures, and shear strength isn't even as good as regular PLA. So i wonder what brand you used, i don't think they're likely to be particularly similar to one another.

@Brocknoviatch 3 жыл бұрын

eSun ABS+ . I have run a full battery on it and there is some wear on the gears. I need to run it some more to give a proper review of it. I would love to know how eSun have modified it.

@ArChA40 3 жыл бұрын

I am not even close to expirianced in printing gears, but in my little experience I found it is a good idea to use rafts. This way you do not risk warps at the edges.

@Sean_735 3 жыл бұрын

You could chamfer the bottom edge very slightly in Fusion so the elephant's foot effect just pushes it out closer to being straight.

@johnnienathan2808 2 жыл бұрын

Amazing content 👍🏾 Thanks for this

@Joshuah2012 2 жыл бұрын

That red audio interface in the back on the desk was a steal back in the day, probably still is. My friend uses one when he makes his music, afaik. He got it was back when it came out.

@mnavarrotube 2 жыл бұрын

Brilliant! Thanks for sharing

@SamWatershipDownPeckinpaw 8 ай бұрын

Great points on filament alignment. I work in the Gear industry and your explanation of the Gear types was spot on. I am new to 3D printing and this answered some questions I had. Have you ever done a Bevel Gear?

@Mindless_One Жыл бұрын

Excellent video-, i found my Wood working background helped a lot in working out the best origination for printing parts that are under a heavy load, Simply because the the Grain of the wood is like the layer lines in printing-. Thanks for the Recommendation on Polymaker Filaments-.

@piscanc1 3 жыл бұрын

Cool project! Regarding improvements, look into "beaking PETG". Basically printing 100% infill and baking it in an oven (inside of salt powder), to get solid plastic part.

@GregorShapiro 3 жыл бұрын

Don't the parts warp some despite the salt packing?

@snorttroll4379 Жыл бұрын

So lile table salt and heat to mwlting point?

@chrisgill5692 5 ай бұрын

Great content!! We really need 4th axis filament winding type printers for parts like this. Could then print the axles and torsion tubes around a removable mandrel using vcarve or similar.

@jazroT 2 жыл бұрын

Awesome presentation!

@gmodesike 6 ай бұрын

Thank you so much for sharing your hard work. You are appreciated, my man.

@thehardwareguy 6 ай бұрын

I appreciate that! Thank you for the kind comment.

@haoshun-tech 7 ай бұрын

wonderful project~

@RoyClendaniel 2 жыл бұрын

Great tips... thanks

@joecnc3341 2 жыл бұрын

Liked-Subscribed-Notified. Very informative. Great video style. Keep up the great work!

@yahligilboa7489 8 ай бұрын

great video! very informative

@purelyrod9310 3 жыл бұрын

I am a newbie to 3DP. Regarding the couplers/drive-cups that you printed, what is the purpose of printing two separate halves and gluing together? Is there any way to print these type of parts as one piece? I need some similar plastic drive cups, except the ones I need have a hex extension with female threaded end for the wheels to attach directly. Any insights much appreciated.

@danielstewart3507 3 жыл бұрын

Cool video. Nice development of your car.

@theironman_man291 2 жыл бұрын

Thanks man this was very interesting

@avejst 3 жыл бұрын

Great video! Thanks for sharing your experence with all of us :-)

@thehardwareguy 3 жыл бұрын

You're most welcome, thank you for supporting me🙏🏻

@Deaner3D 3 жыл бұрын

cool stuff! Wondering if you've every worked with Taulman Alloy 910? I haven't used it in such a rigorous application as R/C gears, but in my experience it's wonderfully rugged. Performs sorta like ABS and PETG combined (but it's nylon) if that makes any sense.

@fernandoi8958 3 ай бұрын

5:12 you could make an internal structure within the axis, with the shell tool or something similar, such that the axis is now built with walls instead of plain infill and you can increase the amount of walls, it would make the structure stronger

@rjpeterson1 3 жыл бұрын

Great video!

@py8551 2 жыл бұрын

Very nice video I have learned a lot thank you, I am new for 3D printing, I have a same 3D printer I am trying to design a small gear for my old SONY walkman it requires a very strong gear to handling a large torque from the motor, could you please provide the correct settings for the ENDER-3 printer? I am using PLA.

@PearlGreySkies 2 жыл бұрын

Great video! I am getting started in robot combat and have been looking at 3D printing gears for my robot's drive trains. Have you tried using Nylon (either pure Nylon, or Nylon blended with Carbon Fiber or FIberglass), or even TPU to reduce shock back to the motor?

@EnchoMoskov 2 жыл бұрын

Pretty cool!

@michaelcerkez3895 2 жыл бұрын

Outstanding. Good luck with the design/prototype. 73

@dieselhead24 2 жыл бұрын

clever idea to print the axles in other orientation for max strength

@ivanv-n3152 2 жыл бұрын

Great videos Bro¡¡ How do you get that accuracy? especially the inner and outer of circles. It is almost impossible to achieve that in my 3d printer. Could you give some tips? Thanks

@ConsultingjoeOnline 3 жыл бұрын

Polymaker ASA is good but a pain to dial in the settings and try to prevent warping. I have enclosure and I use stick glue too. What are you ideal temp settings.

@paramtrx9558 Жыл бұрын

Nice! Thx!

@erick5691 3 жыл бұрын

Nice build - One thing i'd recommend is using nylon instead of PC for the gears. PC is great when it comes to impact resistance, however nylon is a lot more resistant to abrasion which is essential for parts that are constantly rubbing up against each other. Furthermore, nylon has almost a sort of natural "lubricant" property to it, which should help your gears turn more freely reducing wear. In terms of trying to print out the axle, have you tried any carbon fiber infused filaments? They could possibly work, as it adds a substantial amount of strength and rigidity to the part. Personally, i'd recommend either CF-nylon or CF-ASA for your particular application. I believe Polymaker recently just came out with their own carbon fiber reinforced nylon filament, so you should get them to send you some and try it out :)

@petersvancarek 7 ай бұрын

I too think that nylon (PA) is superior... no wonder it is often used for small extruded gears.

@annestyk 2 жыл бұрын

great video bud! i'm super jealous, that rc car looks like a beast. =D

@on8mil 2 жыл бұрын

great vid!

@manuel56354 3 жыл бұрын

I loved this video!

@Hfhsk 2 жыл бұрын

I have no idea how I got here or what’s going on, but I am LEARNING and ENTRANCED.

@octothorpian_nightmare 3 жыл бұрын

I was a little surprised to see you are running the roller bearings without some kind of inner race. Did I miss it, or is the material holding up OK without one?

@anovozhilov 2 жыл бұрын

Thank you very much, very useful information! +

@wpherigo1 3 жыл бұрын

This is great! Your work here would dovetail well with Makers Muse recent video testing different types of filament he was using spur gears and would benefit from your approach.

@markusgutendorff2684 Жыл бұрын

I'm a racepilot in 1/8 gte. What i want to ask you is how sensitive the fishbone gear is to grit particles coming from the track. 1/8 gte is raced on tarmac and is similar to a gocarrack but much shorter. We run open gears to cool down the diffs. all gears are made of highgrade steel and standard straight module 1 teeth. The ony gear we could 3d print would be the main spur gear with is driven by the motor pinion gear which is always a module 1 pinion aand extremely hard steel. PLastic gears are often used for the main pinion gear and i would say the are always made from reinforced nylon. cf or glasfibre and 8mm wide to take att grit particle or 2. The output is 2700w or so from the motor. the weight is 3800g minimum for the car. top speed is 110 kph.the issue is than the track is surrunded by grass lawn so when leaving the track (unintentionally) we get grit on the track that might upset the gears if made in plastic. 1/8gte is of couse 4wd with a cneter diff or a spurgear connected to rear and front diffs. the diffs are oilfilled to get the correct response. and the diffs get hot. Being an egnineer aswell as the goto guy for 3d printing on a school in sweden. i See potential för 3d printed gear both for racing and for students. I have been contemplating 2 or 4 motors instead of on a a projekt. just to get rid of a motor in the center 90 degrees off. This create inertia twisting the car. when 2 motors front and rear would make a better sollution. But i would us inrunners beacuse of reduced inerta and better power to weigt ratio. The escs are 180a to 220 amps a still everything gets hot. I'm guessing high temp material is the only way for a GTe car. For offroading i see an even bigger issue for the typ of car you have built. I race 1/8 buggies too... and there we always ha built in gears. the same motors are used 4068- to 4074 sensored motors. But gte takes alot more power to be competive with turbo. Heat is the worst danger to motors and esc

@christopherosborn7081 11 ай бұрын

Is there a way in FreeCAD to tamper the two outside surfaces of the tooth on a sprocket so fits into the chain better while it rotates?

@CleberRobertoMovio 2 жыл бұрын

Great video Thanks! I got to know more about the great material with this video, it's possible to share your RC car project?

@mitofun6967 3 жыл бұрын

Nice one!!!

@civicrocker 2 жыл бұрын

Don’t forget that straight spur gears are also very loud!

@MathieuAudouin 3 жыл бұрын

Thank you

@pcpatel01 2 жыл бұрын

Could you help with a silent gearbox design for generator which requires a 3:1 ratio closed gearbox.

@sethreign8103 Жыл бұрын

I like how at 5:32 you show the area of the piece that was printed while talking about the area of the same piece that was glued as if they were the same lol

@thehardwareguy Жыл бұрын

They are the same, you can see the line where I glued them together

@TheSateef 2 жыл бұрын

i'm struggling to find the best way to attach a printed gear to a threadless steel shaft. i'm cutting a keyway in the shaft with an angle grinder at the moment but i feel there could be a better way. any thoughts?

@jwonderfulsuccess Жыл бұрын

Very informative. How do I back drive a worm gear?

@super_slo 3 жыл бұрын

Any experimentation with nozzle sizes? What nozzle did you use?

@chuysaucedo7119 Жыл бұрын

First time watching your video. Sub and will watch more! Thanks

@saurabhjambotkar3337 3 жыл бұрын

Good job!! I have successfully printed gears of modules as small as 1 mm. With herringbone gears, the teeth are not coming out very well. I often struggle with bed adhesion since the profile of teeth are so tiny. I have a couple of questions. 1. Your gears seem to have smaller module. What's the smallest module have you successfully printed with? Was it with 0.4 mm nozzle? 2. What's the backlash you keep if? I print gear assembly in one part (when its not physically possible to assemble as in the case of a double helical planetary box.). So what is the clearance you target for the teeth to not fuse together?

@thehardwareguy 3 жыл бұрын

Thank you! My module is 1mm. Pressure angle is 14.5 degrees and helix angle is 40 degrees! The meshing distance can be calculated properly using a formula, check out my FreeCAD spur gear tutorial, I go into detail there!