POLISHING HEADLIGHTS IS A SHAM/scam --- and why you should never only polish headlights

Рет қаралды 2,262,525

Жыл бұрын

In this video you will be viewing a headlight that has been polished multiple times and learn why polishing headlights is a SHAM/SCAM and why it shouldn't be done,(it's not headlight restoration) and the huge differences between polishing headlights and headlight restoration.(2013 Toyota Tundra)
I've done "OVER A THOUSAND HEADLIGHTS" and growing, I have tried DOZENS of different ways and combinations of products, find out what I've discovered to be the best: products, techniques, and ideologies of headlight restoration and learn about headlights. check out my results and and see that I am correct.(ultra clear)
on tiktok
🌎THE HEADLIGHT RESTORATION PRO🌎 EMAIL: theheadlightrestorationpro@gmail.com
_____________________________________________
⭐PRODUCTS AND TOOLS used in video ⭐
-----------------------------------------------------------------------
⬇️⬇️AMAZON PRODUCT DIRECT LINKS 🔗⬇️
-------------------------------------------------------------------------
💨🦾NEW BLOWER amzn.to/3WE9HG7
📦 air duster protective case-
amzn.to/3FZ8Lpz
🟥AC Delco 12v polisher- amzn.to/3vt2Ty8
🔋 AC Delco 12 volt polisher extra batteries
amzn.to/38cllmP
🔫 Ryobi 18 volt drill- amzn.to/3On1ge5
🔋 Ryobi 4.0 ah 18v high power battery
amzn.to/36ATLz7
🟢 3M performance automotive finish tape-
amzn.to/3xK3wpG
♻️ chemical guys glass cleaner- amzn.to/3jZdKdF
➖perfect glass cleaner(new) -amzn.to/3fMoLAM
🚨 3M hard lens plastic polish- amzn.to/3k2bK4E
🧐chemical guys headlight restore and protect
amzn.to/3UltvfQ
🟡 3inch yellow handstanding attachment- amzn.to/38bpfw2
🎩 3-in interface pad- amzn.to/3K65i7h
💨 electric computer duster -
amzn.to/3v2wL5k
🧻 Kirkland premium microfiber towel- amzn.to/3s5kI5F
☣️3M dust and vapor mask- amzn.to/36Bk5sN
☣️ 3M pink cartridge for dust and vapor- amzn.to/3K2oS4b
➖3M black cartridge for strong vapor
amzn.to/3DN0mDc
💛 3M p500 gold sanding disc- amzn.to/3v3E1Or
🤍 3M p800 white sanding disc-
amzn.to/3v2wfEn
🐘 3M p3000 trizact pad/disc- amzn.to/388xN6W
📀3M p320 sanding(harder lights) disc-amzn.to/3TdrQaB
📀3m p220 sanding(harder lights) disc-amzn.to/3FSN8r6
🍊 3M 3 in orange finesse it pad- amzn.to/3xOCsWm
🧻3M headlight clear coat wipes -amzn.to/3EcNfwp
🎆 meguiars spray UV headlight coating-
amzn.to/3vAtfhH
🔷 4 oz blue squeezable container- amzn.to/3JYH9iZ
🧯 spray bottles- amzn.to/36zKAPk
👜 work bag (typically not seen in video)-
amzn.to/37C1HAD
💨 mini blower- amzn.to/3K4oJNC
🌬️ Ryobi 18v fan (air dry sealant)-
amzn.to/3MlOHxB
🪑stool - a.co/d/fikugzw
🍩tape off extra protection amzn.to/3WzzUpb
-----------------------------------------------------------------------
Note: Although I am a headlight restoration expert
and do headlights for a living, I also provide other restoration and detailing services (outside of the vehicle) such as: scratch removal, paint chip fix, minor painting, black trim restoration, water spot removal on Glass and paint, paint correction, paint restoration, oxidation removal, polish buff and wax, ceramic coat, engine bay cleaning and detailing, and much more.etc.
certified professional.
here is a list of some of my favorite supplies & tools I use on a constant basis and have in my work vehicle at the moment..
____________________________________________
⬇️DIRECTLY LINKED AMAZON PURCHASE⬇️
------------------------------------------------------------------------
meguiar's ultimate compound-
amzn.to/3hojcZw
meguiar's ultimate- polish-amzn.to/3WKKbPt
McGuire swirl- removeramzn.to/3Ea5CSI
Maguire's ultimate Paste wax carnauba plus-
amzn.to/3zX553T
meguiar's Gold class carnauba spray wax-
amzn.to/3G1nkt3
McGuire's liquid ceramic hybrid wax-
amzn.to/3NLhA8i
3M rubbing- compoundamzn.to/3FW3G1d
3M scratch remover-amzn.to/3EeADVI
chemical guys extreme body wash and wax
amzn.to/3NJojQk
chemical guys slick finish cleaner wax
amzn.to/3GdGZpN
chemical guys citrus spot remover-
amzn.to/3UluKLS
P&S break buster -amzn.to/3homCeO
Aleapow cordless car polisher.(big boy)
amzn.to/3zVvT4N
spta 3-in cordless polisher (headlights)
amzn.to/3DQJWJZ
mother's back to black spray-
amzn.to/3TilmHJ
Cherokee black trim restore -amzn.to/3zUtDL2
black magic tire gel dressing-amzn.to/3Tj7nkT
black gloves nitrile 6mil- amzn.to/3fMCJTe
_____________________________________________
#headlight #headlightcoating #meguiars #headlightrestoration #headlights #usedcars #usedcarsforsale #used #restoration #pro #professional #viral #viralvideo #headlightcoating #3m
#diy #sacramento #916 #california #theheadlightrestorationpro
#california #916 #restoration #diy #california

Пікірлер: 2 700

@yensabi Жыл бұрын

Cost cutting by manufacturers is why we have to do this , bring back glass headlights and they will outlast the car.... 👍

@theheadlightrestorationpro Жыл бұрын

Stay tuned got some interesting content coming out you would definitely be interested in... Thanks for watching.

@theheadlightrestorationpro Жыл бұрын

kzfaq.info/get/bejne/gsl9edVh0tbUXWg.html

@kylesmith6515 Жыл бұрын

Yeah my 99 Subaru has glass headlights they still look new

@theheadlightrestorationpro Жыл бұрын

kzfaq.info/get/bejne/gsl9edVh0tbUXWg.html

@colemcclintock216 Жыл бұрын

This is a great idea. Until you wreck and there’s glass everywhere

@GhostOfTheAngels Ай бұрын

20 minute video for this is crazy

@mike_oe 22 күн бұрын

yup, blablabla...

@1marcelfilms 20 күн бұрын

Hey chat gpt, can you make this script as drawn out as possible

@wallycunningham5090 15 күн бұрын

Ramble ramble

@robertsaca3512 Ай бұрын

As an industrial chemist who worled for Stanley making polycarbonate headlights and specializing in thr coatings to prevent degradation from UV, I can tell you most of the information in this video is complete nonsense.

@MrRondonmon 4 күн бұрын

Ought to use Glass instead of that Poly BS

@BillWilson-kd2jp 4 күн бұрын

But he said he was a pro. He is sanding a lot of the plastic off.

@yeltsin6817 Жыл бұрын

I used Colgate toothpaste and it was pretty amazing. The added benefit is that my lights won’t get any cavities

@theheadlightrestorationpro Жыл бұрын

🤣😂🤣😂❤️

@guybo07 7 ай бұрын

🤦‍♂️

@theheadlightrestorationpro 7 ай бұрын

🤣

@-First-Last 3 ай бұрын

How about implants ?

@theheadlightrestorationpro 3 ай бұрын

@-First-Last on a woman I don't mind...🤔

@87Rado Жыл бұрын

I use this method and it works well!!! That said, I miss the days when they were made from glass and didn't require restoration... EVER!

@theheadlightrestorationpro Жыл бұрын

kzfaq.info/get/bejne/gsl9edVh0tbUXWg.html Check this out on that topic ☝️

@projectjster Жыл бұрын

Luckily the headlights in my 01 4Runner are glass. But I’ve had to do a couple restorations myself it’s a long process but if done correctly it can last a long time.

@theheadlightrestorationpro Жыл бұрын

👍🏼

@goobfilmcast4239 Жыл бұрын

Plastic is actually safer and allows for bigger headlight designs

@theheadlightrestorationpro Жыл бұрын

Yes... Very much so

@mmdirtyworkz Жыл бұрын

I remember the time when headlights were made out of glass. 20 years later they still looked brand new, no work needed. Great video, many helpful tips!

@theheadlightrestorationpro Жыл бұрын

Thank you appreciate you watching.. You should check this video out it's along the lines of what you're speaking of I think you would enjoy it...kzfaq.info/get/bejne/gsl9edVh0tbUXWg.html

@mmdirtyworkz Жыл бұрын

@@theheadlightrestorationpro Thanks, watching it right now! Happy New Year and best wishes!

@theheadlightrestorationpro Жыл бұрын

😎💯👍🏽

@drewbabydrew7742 Жыл бұрын

My son's car glass ,look fantastic ,horrible little plastic things

@sahhull 8 ай бұрын

The only issue we has was the reflectors rusting.

@Holabella Жыл бұрын

You're so good. It's so difficult to pay someone to do an honest job. I prefer to pay specialists but lately I feel like if I actually want it done right, teaching myself on YT and doing it myself is the only way.

@theheadlightrestorationpro Жыл бұрын

A lot of cases it is like that.. it's hard to find good work nowadays if you find somebody you should definitely keep them.... Small individual people and large mass businesses are just trying to someone get over on people...

@Holabella Жыл бұрын

@@theheadlightrestorationpro I know and i'm not cheap I'm totally willing to pay for a good job, anyways thx 😊

@theheadlightrestorationpro Жыл бұрын

@@Holabella 👍🏽

@StonemanRocks 7 ай бұрын

Except I would hire this man to “restore” my headlights!

@theheadlightrestorationpro 7 ай бұрын

@StonemanRocks 😱🤓👍🏽

@NativeSon60 5 ай бұрын

I spent a lifetime in Automotive Collision Repair. When these Headlamp Assemblies arrived on the scene we knew this would happen. Nice looking job.

@theheadlightrestorationpro 5 ай бұрын

Yeah it sucks I'm thankful for it but it does suck that it needs to be done....

@geraldsimpkins7499 Ай бұрын

Only 2 things wrong with glass headlights; 1. You could buy aftermarket ones super cheap, and install them easily, completely leaving car dealers out of the transaction 2. They are beyond rugged and scratch-proof. (Ditto for hood springs vs. pneumatic struts. Springs last forever, struts only last a few years.)

@MrOiram46 24 күн бұрын

Depends; some aftermarket headlights for different makes are inferior to OEM ones when it comes to durability, and turn yellow faster than the OEM headlights. You can have the old OEM headlights made in USA that lasts for decades, and then most of the cheap aftermarket ones are made in China fog up and fail to seal out moisture in a few years.

@1marcelfilms 20 күн бұрын

How the hell do you break a strut in only a few years? Mine are 25 years old and only now are they starting to get weak.

@geraldsimpkins7499 20 күн бұрын

@@1marcelfilms Never had one 'BREAk" but I have had them get weak enough that I built and carried a kickstand until I could get the time to replace them. Car was '87 beemer, back in year 2000. Hood springs work forever, survive until the car goes to the crusher. THAT is why they have been replaced with gas struts. Ditto for glass headlights that you could buy for around $6 apiece.

@cdlund2840 Жыл бұрын

I used the Sylvania kit and it worked awesome and has stayed crystal clear for the last two years so far in Arizona weather.

@theheadlightrestorationpro Жыл бұрын

Awesome...that's one of the best kits out...💯

@jefftate01 Жыл бұрын

same here. mine was two years old and just starting to fog again so I just reapplied and they look great.

@theheadlightrestorationpro Жыл бұрын

@@jefftate01 generally that's how long headlight restoration last can last longer if you have aftercare or take care of your headlights in a good way.. having videos about that coming up.. The headlights of my vehicle were done over 3 years ago and look brand new... Have a video about why do headlights go bad check that out and you'll see tips on how to keep them from going bad...

@synthoify Жыл бұрын

I followed your procedure to the letter today on a 2006 Pontiac Vibe. When I was finished I said wow these lights look brand new. Thanks for sharing your knowledge and posting this video.

@theheadlightrestorationpro Жыл бұрын

That is awesome!...

@jimmymoser Жыл бұрын

Completely agree that it takes time to properly restore your headlights. The Sylvania kit works great, but you have to put in 15-20 minutes per headlight if you follow their directions. Mine lasted almost 5 years before I had to do it again.

@theheadlightrestorationpro Жыл бұрын

👍🏼

@Stickmanght Жыл бұрын

I just used the Sylvania kit on my headlights. I bought their kit because it came with the UV protectant/sealant. So far they look great.

@theheadlightrestorationpro Жыл бұрын

🦾💯😎

@Stickmanght Жыл бұрын

@@theheadlightrestorationpro I watched Project Farm do a video on a bunch of headlight restoration kits. The Sylvania kit was on he recommended.

@theheadlightrestorationpro Жыл бұрын

It's an awesome kit...👍🏼

@oculartyranus999 Жыл бұрын

I used to work in a big box retailer lube shop and headlight restores was one extra thing we would do with a 3m 4 step sanding kit (2 dry sands, one wet, and one liquid buff) I had a high rate of customers who would recommend me as the tech to do restores as while I would take around an hour or so to get the job done I made sure those lenses where as close to brand new looking as they could get. Biggest thing was educating people on how the "wipe" polishes didn't work or didn't work for long and how sanding was the only lasting way to keep old headlights clear

@theheadlightrestorationpro Жыл бұрын

💯👍🏼

@theheadlightrestorationpro Жыл бұрын

Everything I recommend is in my Bio..the stuff that I use every day. I do not recommend anything that is not made for headlights unless NOTHING else exists that is specifically for headlights...there is no reason too...the only time you go outside of the box is when it doesn't exist...then you you use common sense and research and development..trial and error..

@theheadlightrestorationpro Жыл бұрын

No...not just any polish will do.. It must specifically be used for headlights and or plastic...and even in that realm there are good and bad....what I use is by far the best...I can tell you that from experience..you can use a bunch of things but to come out like my finished product will be different and difficult if not following the same steps .. Should watch more of my videos...I mentioned this a lot... Also all polishes are created for different uses...this is a really special type use being that it is dealing with a clear substance that has special functions..

@theheadlightrestorationpro Жыл бұрын

It's false..... Respectfully common sense... Can't really explain it all now it's actually explained in some videos I think my latest video or latest three videos explains it pretty well... But common Sense suggest there's a difference.. what do you think the difference would be spraying one that's foggy that you can't see through and it turning clear or spring one that's crystal clear and it becoming more clear....

@theheadlightrestorationpro Жыл бұрын

Yeah... False clear... Just because it turns clear doesn't mean it's working properly as I said earlier... Also on the last three or four videos I mentioned it as well should check them out it'll explain better than I can on text. It's a very bad to do this in many ways.. and you only get half the headlight function compared to when you do do it. . don't forget it's not just about visible clarity that you can see with your eye that's about the way the headlight is designed to work pushing out light....

@garyr7027 Жыл бұрын

This is pretty much the way I did my headlights, except I did one more step you missed. I did the 1500 grit before the final 3500 then buffed it. I also wet sanded every step by hand, except for the buffing process of course. Either way the point is if you're not getting past that top oxidation and down to the actual lens, then buffing alone is a waste of time... I learned this the hard way.

@garyr7027 Жыл бұрын

@@PatTheBat the P500 is aggressive if the lens really doesn't need it yes. When I did mine I started out with P800 but it needed it.

@PatTheBat Жыл бұрын

@@garyr7027 P800 is the roughest I would go.

@garyr7027 Жыл бұрын

@@PatTheBat what I kinda thought too. I actually started out with P1200 but the lenses were old and it wasn't doing the job like I wanted without taking too long. Didn't wanna spend an entire day on headlights... Lol

@theheadlightrestorationpro Жыл бұрын

Really should watch a couple of my videos.. especially my portfolio reels 1 and 2.. my quality is definitely second to none.. for many reason dry sanding is one of them.. Thanks for watching

@eurosonly Жыл бұрын

I buffed my headlights this summer but they seem to be just as yellow as they were before I did it. Some yellowness did come out but it looks like there's still some on the headlight. I used the turtle wax headlight restoration kit you can get for 8 dollars which came with two sand papers. I did it by hand and it's still not enough :(. It seems so simple to do yet I cannot get it right and it just frustrates me.

@captlazer5509 Жыл бұрын

Was doing the same yesterday on a 2001 Ford Ranger Edge with original clear light covers. It's a work truck for me and nothing else. I used Mother's NuLens mainly for the polishing head and polish. Clean up with 90% rubbing alcohol. Cheap low tack green tape to mask. Sprayed lens with Meguirs Headlight Coating. I've done this every couple of years with different products for 15 years. Works for me. Would not spray a perfectly new headlight cover, better for an older vehicle's headlight covers. Solid video and grear job.

@theheadlightrestorationpro Жыл бұрын

👍🏼💯😎

@rschneid1996 2 ай бұрын

Impressive result from your effort. Nice to hear from someone who is takes pride in his work and is passionate about technique.

@thewayidoit8895 Жыл бұрын

I worked for an OEM headlight manufacturer about 20 years ago. After we molded the PC clear lens we then sent it to a company that would coat the lens in a proprietary manner I think we called it "hard coat". Some lens had small runs on them when they came back to us. This coating blocked the UV and prevented the degradation you are dealing with. If you don't have some type of UV protection after your treatment it will, as you say, come back quicker and quicker.

@theheadlightrestorationpro Жыл бұрын

🙏🏽💯yes.. thank you for watching .. really appreciate it..

@tayf85 11 ай бұрын

2k clear

@StonemanRocks 7 ай бұрын

Yes! Thank you! Its amazing how many people fall for the restoration scam!

@theheadlightrestorationpro 7 ай бұрын

@StonemanRocks all the time..

@alexandermurghulia7140 5 ай бұрын

they cover it with UV lacquer for. .well..UV protection 🤣 It actually is a plymer that hardens with UV light. Used in UV printing used in many manufacturers for printing various stuff. Lige for instance printing texture on ceramic tiles on floors... Those are UV hardening paints, lacquers

@JohnSmith-gm4fj Жыл бұрын

The method I used was similar to what you did. I got up to a 2000 grit (part of the Sylvania kit I used), each lens took about 45 minutes of sanding and prep. Now it's still good over 2 years later. I think the key is to take your time don't rush any step and really do each step as thoroughly as possible.

@alanwilson6367 Жыл бұрын

I went the dollar store bought a box of baking Soda and a bottle of white vinager . Mixed them 50/50. Boom voila problem solved. Don’t believe me go spend four dollars and spend twenty minutes. Job done.

@alanwilson6367 Жыл бұрын

Baking soda white vinegar ten minutes work and you’re done. Four dollars at the dollar store.

@theheadlightrestorationpro Жыл бұрын

I can go to the refrigerator and put sour cream on the headlight and buff it off I will look good for a minute but it's going to be nothing compared to what is going on full true headlight restoration I'm sure you know that...

@theheadlightrestorationpro Жыл бұрын

kzfaq.info/get/bejne/rpeXo5xyucC4eWw.html

@gravemind6536 Жыл бұрын

@@theheadlightrestorationpro Its like spraying WD40 on stuff it looks good for a few days and then quickly wears off.

@pat14lang Жыл бұрын

When I was working for a shop in Charlotte, NC this was the same step process we did. It was a big kits that was in a carrying case. Only difference was we had two different pneumatic drills…one being a stubby type drill for the sand papers, and the other a polisher type drill that had two different type foam pads for the head. Headlights turned out perfect (if done correctly) every time.

@theheadlightrestorationpro Жыл бұрын

Cool man.. yeah I know 3M sells this $500 headlight restoring tool kit that uses air pressure.. super high tech it's nice but out of my price range..lol

@kykrazy6050 Ай бұрын

Brother...the list you included of your supplies was second to none, GREAT JOB!!!!

@eddiemurray55 Жыл бұрын

Really nice, great attention to detail. Wonderful teaching methods... I've put off doing the headlights on my 2012 jeep because I thought that the quick fix kits seemed sketchy. Now I've got some work ahead of me...

@theheadlightrestorationpro Жыл бұрын

Awesome man.. you definitely can do it and achieve high quality.. you can also use what I use to the best of your ability and watch my videos while you're doing it as a step by step... They'll come out amazing.. (also everything I use for the most part is linked to the bio/so you can get exactly or at least know exactly what I use) Appreciate you watching stay tuned I have a couple actual step by step tutorials that will break down exactly what to do coming up..

@ChristopherCologneASMR Жыл бұрын

This is pretty much how I used to do headlights. But I compound and polish after I wet sand. I like the Maguire's headlight protectant but I started using ceramic coating which I think I like a little better.

@milagrossmith4891 8 ай бұрын

Great informative video. So many out there swear by polishing or waxing only to have it come back. I will try this on both my trucks.

@theheadlightrestorationpro 8 ай бұрын

Awesome you should watch a couple more of my videos check out my page make sure to subscribe over 100 videos running right now..

@pedrowhack-a-mole6786 Жыл бұрын

Always let the abrasive do the work. If you have to use force, the abrasive is no longer sharp or of the wrong type... or you're trying to rush the job. I do this job with 3" and 5"pneumatic orbital sanders, and pads up to 15,000 grit made for plastic. I don't use a plastic polish but I do use a UV-protectant sealer, That's an absolute must!

@Cheepchipsable Жыл бұрын

Yes, the uv sealant or clear coat is the only way to make the finish last for a long time. sometimes I have just used a foam pad and compound to shine them up, but they will always go dull after a couple of months. Whatever UV coating they have used at the factory has gone. Sometime this os obvious, as you can see the film breaking up.

@theheadlightrestorationpro Жыл бұрын

💯🤓

@JB-fn7ky Жыл бұрын

Thanks for sharing keeping it real. I’ve done them all in hopes of “easy” fixes = dumb, wasted efforts and monies. THIS IS THE WAY GUYS, excellent share here, spot on, what’s covered here is perfect, pay attention, every sentence is golden!

@theheadlightrestorationpro Жыл бұрын

Wow... Awesome man I appreciate it.. Many more videos up and many more to come. Stay tuned.. Appreciate your viewing..👍🏼🤓💯

@arthsvic6828 8 ай бұрын

every sentence is golden ? when he says he's not removing headlight matter but "just the polish"... what polish ? he's removing the oxidized clear coat, polish isn't something that sticks to the headlight... and basically you need to wet sand by hand for this job.

@theheadlightrestorationpro 8 ай бұрын

@arthsvic6828 spoken like somebody who knows nothing about..lol Normally you'd be correct but this headlight is so old and oxidized there is zero headlight clear coat left on the headlight especially because of the repetitive polishing.... If you know what oxidation does it degrades something until it disappears pretty much evaporates... Before you get on here you discussing something you don't know or understand you might want to educate yourself a little bit..... And I should look at my channel or read the bio and understand that I am a professional at this while you are just some guy making up sentences about stuff you don't know about....(and and wet sanding is for novices and beginners as it is training wheels and the weakest form of headlight restoration... It has one place and a proper headlight restoration and that is at the middle to end of the process..) Now I know you've done three lights in your past.. but if you watch this channel you will be actually educated about have my restoration and headlights.... Appreciate you watching but you probably should watch more....💯

@charlesdempewolf6861 8 ай бұрын

I used the 3M kit and it was a bit more expensive and it worked very well on my wifes car. I had never done this before, and I watched Farm guy comparison, and then followed the directions. Worked quite well!! I was amazed. The cause was not as described in this video. The cause was simply age and living on a dirt road and a very very buggy area (acids). Anyway, good video. Thanks.

@theheadlightrestorationpro 8 ай бұрын

👍🏽

@victorpresher3661 Ай бұрын

Thanks for sharing. I was getting ready to purchase new headlight. Now I'll try your way to correct the issue.

@christinanavarre8389 4 ай бұрын

I'm 66+ Thank you Sir! I have a 2005 F-150 XLT. Great truck in almost perfect shape. Low miles considering its almost 20 yrs old. But my headlights are worse that the Tundra you just finished. I have the power tools at my disposal so I will rewatch and get them done, once we are put of winter here in Northern Michigan. Thank you so much.

@theheadlightrestorationpro 4 ай бұрын

Awesome man good luck if you run into any issues just go ahead and feel free to watch this channel there's over 130 videos now streaming....👍🏽

@welcometomychannelswelcome7261 8 ай бұрын

Your videos are perfect. Easy to understand.. you have a great talent.

@theheadlightrestorationpro 8 ай бұрын

Thank you I try to make it easy to understand as much as possible and yet give everything that people need to know about real true headlight restoration... Really appreciate you watching and taking time to notice...👍🏽💯💪🏽

@billharm6006 Жыл бұрын

Based on my experience, you advice is spot-on. I used a 3M kit to do essentially what you show in your video. There was a learning curve. Patience is important: My first lens took about two hours. The results have been great. My biggest surprise was how yellow the first removed material was. I've done multiple cars now (for family).The first car's headlights were cleaned up two years ago and still look great. The only down-side of the 3M kit was it did not have a UV-blocking final coat. I had to purchase that separately (Yes. The UV protective coat was distinctly labeled for headlights). My biggest struggle was getting the swirls removed (patience, keep the drill moving, keep the pressure light). I tried a sanding block, but gave it up quickly because it would not conform to the compound curves of the headlight and only provided a line or point contact. I do wish that I had had a hand holder for the sanding discs, one like you used in the video (gotta find me one of those).

@theheadlightrestorationpro Жыл бұрын

Yes that is the main reason I've Incorporated the step with the hand sander it helps level out until the micro swirls left behind by the p800 and some occasions it really just deletes them.. it's a must step but most headlights... That with the extra high power 700 RPM polisher make an extreme difference... Thank you for watching...😎🙏🏽

@EdgarAllanGo Жыл бұрын

You ever watch the video by ChrisFix? He shows you how to do it without a device

@theheadlightrestorationpro Жыл бұрын

Yes . He's awesome he's one of my favorites on KZfaq.... What's that being said yeah you can do it without devices you can cut a football field with a push rotating old school lawn mower might take you 15 hours and I might look decent for what you working with... But it would never compare to a team of people on sit down lawn mowers that did it in 1 hour... If that makes sense... But you can definitely do it without any kind of tools or whatever if you are skilled enough it can come out pretty good..

@EdgarAllanGo Жыл бұрын

@@theheadlightrestorationpro I love that you aren’t bashing him! My comment was more for the OP, but for some reason it didn’t tag him. It’s definitely why I found your channel. I don’t want to do it by hand when I can use a machine 🫠 Just wasn’t sure on pressure/technique etc. love the content! Glad I found your channel from the “recommended view”

@theheadlightrestorationpro Жыл бұрын

Keep watching my videos there's a bunch of videos that specifically stayed on pressure and how much pressure to use more in depth but basically you just want to finesse you want to use very little pressure it's more finesse than strength..😎💯❤️

@stanleystrycharz2572 24 күн бұрын

Great video. It's not that folks are polishing headlights to screw others, it's that they just don't know the science of what happened and how to properly repair it. Your video is a great teaching tool!! Thanks for taking the time to make it. BTW Project Farm did a great review of headlight repair products. That is good information too!

@onetruesoldiervt3686 2 ай бұрын

Nice job I’m going to try this when the weather gets better !!!

@mikesilva5069 Жыл бұрын

I used a 3M kit about 2 years ago and both my headlights still look good. Your method is obviously superior to what I did. When I do it again, I will definitely will be doing what you are doing.

@theheadlightrestorationpro Жыл бұрын

Yeah that is one of my favorite kids one of the best ones.. I'm a total three of Fanboy just because it's honest it makes sense that it's literally a fact it's is better.. yeah she tried out and it's easy to just watch me as you do it and just follow the steps and how I do it.. Thanks for watching got some new content dropping soon stay tuned..

@FilthUD Жыл бұрын

Did the same process 4 years ago but stopped sanding at 800 and used a good aerosol 2k clear. Still look perfect and it sits outside. Not sure if it’s because I used a quality product but 🤷🏽‍♂️

@theheadlightrestorationpro 11 ай бұрын

Cool

@sokola311 3 ай бұрын

Patience pays everytime. Great work.

@theheadlightrestorationpro 3 ай бұрын

Yes it does ...thank you... You should see my latest video.... kzfaq.info/get/bejne/oLaCarCltLTGeIU.htmlsi=2S-YBlhB8yND_nvG

@DavidLove-hc9xv 3 ай бұрын

Man! I like this video. I liked how it was demonstrated with clear and reasonable instructions. Thanks!

@theheadlightrestorationpro 3 ай бұрын

If you like this video you should check out some of the other ones there's over 140 now streaming on this channel this is an older video some of the new stuff is really awesome... Thanks for watching

@soldier09r Жыл бұрын

Loved this from beginning to end!

@theheadlightrestorationpro Жыл бұрын

Thank you man... appreciate it the words.. Please make sure to subscribe and stay tuned for future content..💯👍🏼

@xXDarthBagginsXx Жыл бұрын

I've always used 3M's pads and disks when I was doing resto's on headlights when I was a tech - had amazing results. I do agree those Maxima headlights are a PITA as well, resto on headlights takes a smooth touch and you can't just brute force it or else you will burn the lens.

@theheadlightrestorationpro Жыл бұрын

Yes Sr......🦾💯

@mrsheehy9896 2 ай бұрын

Great job! Thanks for all the details.

@arthurrodriguez180 7 ай бұрын

My mistake for asking for everyone to know. Very helpful video Thank you

@theheadlightrestorationpro 7 ай бұрын

👍🏽

@stevenspevere2217 Жыл бұрын

Watched your video and did my 07 Tundra today. It turned out great! I love the UV headlight spray. So much better than other products I've tried.

@theheadlightrestorationpro Жыл бұрын

It's an amazing difference.. I struggled for months if not my first year trying to find an adequate product to match my stride for perfection and this is what I came up with... And I've tried about 75% of what's out there on the market literally... This product hands down it's just so much nicer than every way... Glad your results came out good... 💪🏽 Happy more videos out and plenty more to come just dropped one actually right now...

@waldoH36 Жыл бұрын

I do everything you do, but with two extra steps. I'll also wet sand with P500 and P800 after I dry sand with each. I feel I get a much smoother surface because I'm cutting into the material just a little bit more. I personally have found the Mother's Headlight Polish and Meguiar's sealant seem to provide the best results, in my experience.

@theheadlightrestorationpro Жыл бұрын

You going to watch out for excessive sanding you don't want to do more than you need too. Thanks for watching plenty of ways to do it.. out of my experience of being a headlight Restoration company , also being a restoration specialist ,and high end detail shop. This is what I have learned to be the best through tons of experimentation and well over a thousand headlights done... Appreciate you watching probably should check out some more of my videos..😁

@paddyboom122 22 күн бұрын

You are a legend in your own mind!!

@timwilkins3258 8 ай бұрын

Yoo Pro I bn practicing your method and when I tell you it works man I am getting better and better, I will be getting better after I get all the tools and products you use

@theheadlightrestorationpro 8 ай бұрын

Hell yeah man... I'm really glad to hear that it is working for you..💪🏽 Keep up the good work...💯

@browardheadlightrestoration Жыл бұрын

Awesome as always!!

@theheadlightrestorationpro Жыл бұрын

Ahhhh... Thank you man... appreciate it...👍🏽 Thanks for watching...💯

@mapexzildjian6361 Жыл бұрын

I started doing this about 20 years ago. Along with painting a vehicle if the headlights needed it I would re-clear coat them. Prep with 800 grit, warm water with a drop or two of dishwashing liquid. When properly prepped plastic adhesion promoter is not needed. But I started adding it and noticed the clear lasted much longer. Over a decade on my Mazda and the headlights still look brand new.

@johnkaimins9998 Жыл бұрын

Yes ~ the end result all comes down to proper and thorough preparation!

@BadRonald1 Жыл бұрын

Never played Mapex. What do you like about them ? Im a Ludwig / Paiste man But starting to get into Meinl more.

@mapexzildjian6361 Жыл бұрын

@@BadRonald1 Wasn't really a preference, just kind of ended up with them. It's a big set, user friendly hardware and they sound good. I've had a few Pearl, and a couple of Tama sets. I have a lot of Paiste. I like their quick cut and dry, low sustain. I'm sure you know, a lot of drums is all about the tuning. I had CB 700s when I was a teenager spent hours tuning them and they actually sounded great.

@theheadlightrestorationpro 11 ай бұрын

Awesome.. welcome to The Future..💯

@jeffropenn Жыл бұрын

This was incredibly satisfying to watch. I’m a new subscriber. Always wanted to learn how to do this the RIGHT way.

@theheadlightrestorationpro Жыл бұрын

Yes indeed.. check out my portfolio videos.. kzfaq.info/get/bejne/mKl0Z6Slls-qcZs.html

@jeffropenn Жыл бұрын

@@theheadlightrestorationpro definitely will. Thanks.

@INTHEFIELD777 Ай бұрын

I like that you show the whole video. Do you recommend that spray you use “for headlights” better than ceramic coating? Or would you still recommend a ceramic coating at the end of it all?

@martinschulz9381 Жыл бұрын

If you use a headlight protection wax in the first place you can prevent the clouding . We went 13 years on my wife's last car and the headlights still looked like new. Her car was parked outside every week day. You have to clear coat them no what ever you use or the clouding will come right back.

@yactabay Жыл бұрын

Please name the product you used.

@theheadlightrestorationpro Жыл бұрын

Which one..?

@johngreen8693 Жыл бұрын

@@yactabay He has listed them above.

@martinschulz9381 Жыл бұрын

@@theheadlightrestorationpro I use WOlfgang Plastik Sealant. I hear that Meguiar's 'Keep clear Headlight coating' is good as well.

@martinschulz9381 Жыл бұрын

@@yactabay The store brand that I used is no longer available, but I now use 'Wolfgang Plastik sealant' (Plastic with a K) I hear that Meguira's 'Keep clear headlight coating' is good as well.

@Good-Enuff-Garage Жыл бұрын

having played this game, polishing does not last, it will be cloudy within a year, just buy new headlights, the problem is that they are made out of plastic and not of glass like back in the day, the headlights on my 1954 Chevy Truck are still clear, imagine that

@chrissemsch8781 Жыл бұрын

The problem with glass lights is that the lenses break when a rock hits it. When theirs a hole in the lens then dirt and gunk gets in there and so have to replace anyways. Sand, polish, ppf and ceramic coating is the way to go. Not polish only.

@ragnaroksangel Жыл бұрын

Plastics deteriorate because they lose oils. Plastics are petroleum products. Restore the oils and restore the product. Buff it out with Rain X-treme Clean and a paper towel, wipe off with plenty of water, then apply furniture oil like teak oil or boiled linseed oil. Bet after removing the haze and applying the oil you don't end up back here. You're fucking welcome, motherfuckers

@ragnaroksangel Жыл бұрын

@@chrissemsch8781 What the fuck do you drive that you have a glass headlight

@Good-Enuff-Garage Жыл бұрын

@@ragnaroksangel and how many weeks / months before you have to do it again?

@chrissemsch8781 Жыл бұрын

@@Good-Enuff-Garage so far on my wife’s car, sons car and about 50 other customers cars I’m at 5 years.

@renagade469 Жыл бұрын

Terrific video...through explanations and solid technique. I will follow these steps to restore the headlights on a 2005 Lincoln Continental Signature series I inherited from my Uncle (17yrs 98,000 miles). I'll post my comments after I complete this process. Thanks again!

@theheadlightrestorationpro Жыл бұрын

Awesome....you got it for sure . Don't forget you can literally watch the videos while you do it ... 👍🏽☺️😎

@paulconnelly4050 7 күн бұрын

Seriously satisfying.

@abigailhurley8711 Жыл бұрын

Just found your channel and wow so informative! Curious your thoughts on dry sanding vs wet? I watched a few videos where the guys wet sanded and wasn’t sure if one was better than the other? Thank you for your videos!

@theheadlightrestorationpro Жыл бұрын

Keep watching...got a couple videos here that speak about this . Dry sanding is 👑 wet sanding does have small place.

@KubotaKid 7 ай бұрын

Good work. Do the same with all my vehicles and family. Kids Corolla lasted about 3 years in the desert SW before the fade was really evident.

@theheadlightrestorationpro 7 ай бұрын

Awesome....👍🏽

@arniepa 2 ай бұрын

Great talk though and impressive results but wondering, do you clean the lens after the plastic polish stage? - wondering if the spray could react with some plastic polishes?

@EmilyRose900 Жыл бұрын

I recently did this with my headlights as well. I started with 400g a little bit because my lights were pretty yellow. Then 600g, 1000g, then 1400g, 4000g, then 5000g. All wet sanded by hand. Then 3 layers of clear and they look brand new and will for a while.

@theheadlightrestorationpro Жыл бұрын

Awesome man.. stay tuned got a lot more stuff coming up

@gen2-x364 Жыл бұрын

When I bought my new car I installed Xpel clear film headlight protectors. So far I am extremely satisfied with the Xpel product.

@theheadlightrestorationpro Жыл бұрын

Never used it... Interesting in the side effects when it comes off.. I've had to do a couple removals, and a couple customers have called me after they removed and it pills off all the clear coat.. don't know if they were this specific brand but same concept... Interesting though

@dontcare563 Жыл бұрын

I've used Xpel on 3 of my cars now including the headlights. No problems at all.

@theheadlightrestorationpro Жыл бұрын

@@dontcare563 so you've had to remove it....😁

@dontcare563 Жыл бұрын

@@theheadlightrestorationpro No not yet.

@chrissemsch8781 Жыл бұрын

Make sure you put a multi-year rated ceramic coating on ppf. That way the ppf won’t fade for a long long time

@JacobE-23 Жыл бұрын

I work at a body shop, this is pretty much the process I showed my boss compared to how they did it by just polishing the piss outta it lol. I wet sand by hand though, depending how bad the light is I'll start with 800 if really bad, finish with 2000 and use a metal polish to polish the lights. Works wonders. My boss liked it so much only I get to do them now.... Hurray!!

@theheadlightrestorationpro Жыл бұрын

👍🏼 awesome...

@toekneesee7113 Жыл бұрын

Should have negotiated a kickback on each set you do. They respect you more when you fight for your real value..they cuss and grumble but would do the same things. That’s how they became, “The boss” or owners.

@JacobE-23 Жыл бұрын

@@toekneesee7113 nah, his father owned it and it fell into his lap basically lol. But I agree with what you said, wouldn't have been a bad idea 🤔 to late now been years lol

@theheadlightrestorationpro Жыл бұрын

Yes... very true...

@imagemaker666 Жыл бұрын

I ran a body shop for a while as well, we would actually sand the off the headlights 400-600 Then mask them off and clear them when we did the other repairs. I’ve seen lights that were done five and six years ago, they still look great

@michaelpendleton7429 3 ай бұрын

I bought a headlight cleaning product at Wal-Mart and it made my headlights clean and clear and they look great.

@theheadlightrestorationpro 3 ай бұрын

Good for you..😁😊👍🏽 Do this method they can look like this and stay like this for quite some time.. kzfaq.info/get/bejne/oLaCarCltLTGeIU.htmlsi=wwhu817i0Iwnbwr9

@john62841 15 күн бұрын

I noticed you just did one heavy coat at the end, is that better then doing 2 or 3 light coats (let it dry between coats) instead? Thanks in advance!

@gimne Жыл бұрын

I’ve seen people put paint protection film after doing the process which is supposed to help prevent it from hazing up. What’s your opinion on this?

@theheadlightrestorationpro Жыл бұрын

Not really practical.. it's been a practice for years it's quite where actually it's not the recommended method.. has a potential of a lot of weird wears happening, issues with liquids and colds... Haven't actually applied it to have removed 2 so far.. also the main reason of non-practicality is that it does hinder or to store your night vision in comparison .. also with some lights I don't think it will work with the bizarre shapes and peaks.... But they're coming out with all kind of new films and protectant clear bras and such type of films.... Me personally not a big fan of wraps and stuff like that even for paint.. too many variabilities that mess things up in the long run and for a customer who knows nothing about cars or paint or headlights you're going to be getting called out there to fix this corner to fix that corner and this is peeling off to redo this etc etc.. with a regular New age highlight restoration it set it and forget it... Also paint protection film is for paint that headlights I'm a stickler for using the product that is made for the situation.. but there are old school films rather rare that are actually made for headlights.. That's basically what I'm referring to.. Thanks for watching I hope you subscribed plenty more interesting videos coming.

@theheadlightrestorationpro Жыл бұрын

kzfaq.info/get/bejne/oa-lpZeJ3b_OdJ8.html

@bme7491 Жыл бұрын

I used the Sylvania Headlight Restoration Essentials kit several years ago and it's holding up well.

@theheadlightrestorationpro Жыл бұрын

That's how headlight restoration last

@robertheinkel6225 Жыл бұрын

I like their kit as well.

@theheadlightrestorationpro Жыл бұрын

That's about how long headlight restoration last..

@robertingram2820 8 ай бұрын

OK. What does headlight coating spray "do", improve clarity or mostly protect UV rays? I did not apply coating when I did mine. Live in Arizona and sun trashes plastic. Also, no water during first two sandings? Thanku

@theheadlightrestorationpro 8 ай бұрын

Yes sir dry sanding is King... Be sure to check out a couple more of my videos I have a hundred plus up... And you'll see that dry sanding is by far the superior method... Also the coating is shown on every video or most videos.. it is the McGuire's headlight coating... It is also listed in the bio along with everything else that I use....

@billclancy4913 2 ай бұрын

I did my 2008 Tundra with a 3M kit that included a UV protectant at the end. They look great a year later.

@Robnord1 Жыл бұрын

Thanks for sharing your expertise, both in the video and the comments. The big sham is the restoration need created by the manufacturers and their inadequate plastics. I restore the one piece glass headlights on my 94 E250 by washing and replace at 10-15 years when they start getting noticeably dimmer.

@theheadlightrestorationpro Жыл бұрын

True .. awesome.. thanks for watching play more stuff coming up.

@supabiscuit Жыл бұрын

Agreed 💯

@FelixtheMetalcat Жыл бұрын

What are you replacing? On my Honda I have to replace the entire headlight assembly at $500 or so because you cannot only replace the plastic "shell".

@theheadlightrestorationpro Жыл бұрын

Exactly that's why I have that restoration has beneficial.. no need to replace the whole light..

@electronicengineer Жыл бұрын

I remember when the clear plastic portion of the headlight assembly of a car/truck was made out of glass (I guess I am old as dirt). I cannot believe that car manufacturers switched out the glass with plastic. Of course plastic will fade, cloud, discolor, craze, etc. over time. This is what the real problem is. Car manufacturers found a way to up their profit, by switching out the glass lens of the headlight assembly with cheap plastic (Lexan/acrylic) material. Now we owners of these plastic crap-boxes have another early failure point on our vehicles... cloudy headlights. Giving rise to a whole new industry, to try to undo the sunlight damage caused over years of sunlight exposure. If the headlight assemblies were still made out of glass, like they used to be, we would not be even talking about this issue. Big industry sticks it to the hard working consumer again... Surprise... Fred

@richardcarruthers1252 Жыл бұрын

Used T-cut on my well faded headlights. Needed to use a fair bit of elbow grease, but worked a treat.

@theheadlightrestorationpro 11 ай бұрын

👍🏽

@thetrailoutthere Жыл бұрын

Awesome work! Do you just let the uv sealer dry or do you have to let it flash then wipe off?

@theheadlightrestorationpro Жыл бұрын

Awesome question.. just let it dry preferably air dry.. feeding a bunch of arid rapidly drives even faster without the air it dries and like 30 seconds and anything over 80°, anything colder up to a minute really fast.. then just don't touch it at all for safety precautions I tell people do not touch it or watch the vehicle for 48 hours just to be safe.. it takes about 24 hours to fully cure even though it's dry to the touch..

@JohnnyCab 5 ай бұрын

Wow they came out beautiful!

@theheadlightrestorationpro 5 ай бұрын

Thank you appreciate it this was a light that suffered for permanent damage even when the finished product was done but still a lot better than what they did look like.. You should watch some of my other videos there's over 130 videos streaming on this channel much better examples than this one.kzfaq.info/get/bejne/hrSZhqWYuNumYp8.htmlsi=P0jQvq5Wmqy17KE2

@bradwooldidge6979 Жыл бұрын

If you have a new car, I’ve found that if you wax the headlights once a month, they’ll never turn cloudy. I had an Escape for 13 years, and the headlights were crystal clear.

@curlyhairdudeify Жыл бұрын

What type of wax? Is the new ceramic coat better?

@bradwooldidge6979 Жыл бұрын

@@curlyhairdudeify I’ve never used the ceramic stuff. I used Meguire’s liquid wax, but any good wax would work, My car was always garaged every night too.

@theheadlightrestorationpro Жыл бұрын

👍🏽

@patverum9051 3 ай бұрын

Mineá Renault Kangoo,15 yrs old, always parked outside in southern France. Only ever waxed the headlights,and they are fine...some Kangoos I see on parkings etc. are fully dull.

@theheadlightrestorationpro 3 ай бұрын

@patverum9051 waxing is the best thing you can do for prevention..

@ohboy2592 Жыл бұрын

Great video. I’ve only got about 50 or so headlights under my belt and I never used the buffing or polishing methods. When lights are clouded I go straight to wet sanding. 500, 1000, 2000, 3000 grit. After a good cleaning I apply a clear coat. Off the shelf rust oleum lasts between 2-5 years and 2k clear is 3-6 but it takes some work to get it off if I have to do it again but nothing terrible. I also like 3m products.

@MiguelRPD Жыл бұрын

How do you deal with orange peel from the clear coat afterwards ? I've tried my best but it always comes up ...

@theheadlightrestorationpro Жыл бұрын

No orange peel with this product whatsoever.. have never had with this product.. this product is so silky and smooth you set it and forget it really ultra even seal like a shell... Zero orange peel no chunks no tips no spots nothing, that's literally one of the only ones that have absolutely no orange peel... And the crust surface of it dries about 30 seconds and 80° heat are above, any colder than 70° about 60sec..

@dereklinfitt8875 Жыл бұрын

@@theheadlightrestorationpro *peel

@theheadlightrestorationpro Жыл бұрын

Lol ..talk text .. thanks 👍🏼

@stevofromiowa Жыл бұрын

I sand and clear coat as well. Durable and long lasting.

@StonemanRocks 7 ай бұрын

Thank you and finally someone telling it like it is!

@theheadlightrestorationpro 7 ай бұрын

Yeah some love it some hate it but either way we all know it's the truth....💯

@bernardsaberon4634 Жыл бұрын

Hi! Thanks for the excellent video. At the end, you used the Mcguires clear. Do I need to respray the sealant every year or is it once and done?

@theheadlightrestorationpro Жыл бұрын

Nothing you can do with the headlight is permanent if anybody ever tells you they can spray on a permanent or headlight restoration is permanent they are 100% lying or an educated.. You can make them last I considerably long time if you take care of them.. watch my video about aftercare you'll see what I'm talking about... Dennis McGuire's definitely should last more than a year if you take care of your vehicle..

@paulpaintshop103 Жыл бұрын

I usually use the same sanding method and then two coats of good quality ultra high solids 2K laquer, never had an issue.

@theheadlightrestorationpro Жыл бұрын

You will ... When it comes time to take it off again you'll see all the damage it caused in general and then you'll see all the damage it's going to cause trying to take it off and how difficult extremely difficult is to remove in comparison.. lot of people don't know because the frequencies is not there their ...(don't do enough headlights/the need to remove it) the need to remove it is not there ...they do one maybe a couple cars and that's it.. so once again when it's time for you to start removing whatever you did because IT WILL GO BAD and you're up close seeing all the damage to the left behind if you can get it off YOU'LL SEE... Thanks for watching please follow like and subscribe.. a lot more stuff coming up.

@donsmith9478 8 ай бұрын

That method is certainly good for restoration of headlights when the headlights have been caked with cleaning substances previously. However, I have replaced a couple sets of headlights when the headlight plastic had tiny fissures within the plastic. Those fissures were not on the surface and could be seen when sunlight was shining on the headlights. Fortunately, those headlights were not so expensive. One set was $110 in 2014 on a 2002 car; the other was $150 in 2010 on a 1998 car. Both replacements were done with 30 minutes per car.

@theheadlightrestorationpro 8 ай бұрын

👍🏽

@theheadlightrestorationpro 7 ай бұрын

kzfaq.info/get/bejne/jb6Firp3mZ2vqac.htmlsi=ntUGrrEmlExS9_Wy

@grahamshillingford8229 Жыл бұрын

Great result, I've used a 3M product the exact same way, but you do love to talk!!!!

@theheadlightrestorationpro Жыл бұрын

Talking is how you educate if I did the opposite what would people learn how would they understand..lol Imagine going to a classroom with a teacher just sat there quiet with the books open... Counterproductive

@brilliantactor Жыл бұрын

I used a kit similar to this and my headlights turned out pretty darnn good.

@theheadlightrestorationpro Жыл бұрын

Awesome... Those that can do..👍🏼💯

@psk5746 Жыл бұрын

Another example of how older cars are better. Glass was the best product for headlights!

@theheadlightrestorationpro 11 ай бұрын

Ow really...kzfaq.info/get/bejne/gsl9edVh0tbUXWg.html

@ponchoremerize5508 Жыл бұрын

This is one of the MAIN reasons we need to go back to Glass Headlights!

@theheadlightrestorationpro Жыл бұрын

A lot of problems with that though.. kzfaq.info/get/bejne/gsl9edVh0tbUXWg.html

@richsmith9063 Жыл бұрын

Wow, your content is AMAZING !!! Thanks.

@theheadlightrestorationpro Жыл бұрын

Hey thank you for watching... Really appreciate it.. I have plenty up and plenty more to come..💯👍🏽🤓

@Fundaykidzz 6 ай бұрын

Great video .. what polishing disc are you using please ?

@theheadlightrestorationpro 6 ай бұрын

It's typically listed on every video there's only a few like this one that is not shown on screen during the video... If you want some other ones you'll definitely see them come across during your viewing they're also all listed in the bio along with everything else that I use.. But they are 3M European style discs which are the discs that have the P in the front... So example:p500 , p320 etc... 3M is going to be the best products you can possibly buy especially for sandpape. ramzn.to/47BCwbj

@JimHalpertFromTheOffice Жыл бұрын

Hello there, question. I have some *minor* clearcoat peel on my 3-year-old aftermarket headlight lenses. They're otherwise fine. As a complete novice/amateur, how do I go about restoring them to brand-new? I don't own a drill. Thanks in advance.

@theheadlightrestorationpro Жыл бұрын

Honestly..in your situation I would go with a professional service...or get a restoration kit a handheld one...(no tools needed)... Check out this review. Cerakote kit.. kzfaq.info/get/bejne/npiFhbeG3pvYmWw.html

@JimHalpertFromTheOffice Жыл бұрын

@@theheadlightrestorationpro Thank you for your quick reply and advice!

@NeilD163 Жыл бұрын

If you know a friendly paint guy ask him to sand and 2k clearcoat, will last 10 time longer than these kits.

@pilgrim985 4 ай бұрын

Glad this video came up randomly in my feed… I’ve been thinking about doing headlight restoration as a side project but quality is an absolute must for me. After watching this video, I’m confident that I can gain the knowledge that will enable me to produce high quality results. Subscribed! Thanks!

@theheadlightrestorationpro 4 ай бұрын

Awesome man you definitely can do it there's over 130 videos now streaming on this channel you should watch a couple more before you do your headlight restoration.. also this one came out great but other videos have much better results to check them out...

@Ciscoho 22 күн бұрын

I don't have P500 grit but do have 400 and 600. Given the choice between the 2, which one is better to start with ?

@Drippin94 Жыл бұрын

Hey my guy what do you think of ceramic coating for the final uv protection coating?

@theheadlightrestorationpro Жыл бұрын

kzfaq.info/get/bejne/oZ6Pn82Gu7fKpqM.html Check it out here..

@JacobEmch91 Жыл бұрын

Very nice. The fibers of the finesse it pad serve to dissipate the heat which is why they are superior for removing the 3k grit scratches compared to a foam pad which gets very hot very fast, which instead of cutting the surface, it melts it. The quickest way is with an edge buffer- a canton flannel wheel with a dry compound like gw16 made for plastics. I restore polyester piano finishes and this was a joy to watch. Maybe I should get into a side line of work 🤔 Best, JE

@theheadlightrestorationpro Жыл бұрын

Awesome man.. thank you very much for watching plenty more videos out.. and plenty more to come soon..

@1001Hobbies Жыл бұрын

I used the $20 3M headlight restoration kit on my wife's Uncle's 2008 Mercury Milan last year. His headlights were just a little bit worse than the headlights on this Toyota. They were never polished, just weathered/sun beaten. When I was done they were like new again. Now, a year and a half later they still look like the day I restored them. The clear coating they provide is holding up just fine. Best $20 he ever spent.

@theheadlightrestorationpro Жыл бұрын

Yes that's one of the best kids 3M is more Superior in every way and 99% of their products in my opinion..

@Baycydney Жыл бұрын

After watching several of DIY restoration videos, I happened on yours and am so glad I did! I bought the 3M kit and followed the steps you recommended. Everything worked out beautifully - on a 2002 Camry that had never had anything done to headlights except running it through a drive thru car wash. Oxidation for 20 yrs, but it’s gone now thanks to you. Question: I used the 3M clear coating sheets at the end. Should I follow that with Meguier’s UV sealant too? Thanks again!

@theheadlightrestorationpro Жыл бұрын

Thanks for watching. I appreciate your support.. as far as the clear Sheetz normally the headlight restoration comes first and then that would go over from what I've seen..

@Baycydney Жыл бұрын

@@theheadlightrestorationpro Yes! I did the restoration, and then used 3M clear coat sheets. Should I follow that with Meguier’s UV headlight protectant too? TYVM!

@theheadlightrestorationpro Жыл бұрын

No you should never double coat... Check this out...kzfaq.info/get/bejne/hM2ogayetKfTc40.html

@theheadlightrestorationpro Жыл бұрын

kzfaq.info/get/bejne/rpeXo5xyucC4eWw.html

@dg-hughes Жыл бұрын

Good video. Good tips. Thanks for clearing that up.

@theheadlightrestorationpro Жыл бұрын

Awesome..thank you 👍🏼💯

@StartRestoringHeadlights Жыл бұрын

Amen. A lot of my customers are DIY'ers or have had their detailers polish out the lens.

@theheadlightrestorationpro Жыл бұрын

Yes .it is problematic and just impacts the issue making it worse and come right back even quicker... Thanks for watching.. I appreciate it..💯👍🏽

@alfaholicsgreece Жыл бұрын

I have polish a LOT headlights using 2K clear coat and all looks amazing 3-4 years now.. Dont be fooled with the "specific" headlights products. A good 2K clear coat under the right temperatures can made miracles with no need to waste money on "well know brands".. Dont get me wrong , i dont mean maguiars are crap. I love all their products but for me a good 2K clear coat works best. Keep on with the great vids..Cheers !

@theheadlightrestorationpro Жыл бұрын

To each his own but I run a business and my number one priority is to keep the vehicle on the road as long as I can, well that's damaging it while doing it or it happening in the long run from something I used.... 2K clear ACTUALLY DAMAGES HEADLIGHTS in the long run and it happens rather quick in the terms of the lives of the vehicles... Wondering if you've ever tried to take it off.. It's a nightmare anywhere in a high risk of damaging the light or the areas around the light from excessive sending which is needed because it's heavily scratch resistant.. it's not about big names it's about what tool is made for what purpose you don't use foam board in place of drywall, You don't replace your car is gasoline with alcohol (most cars)... You use what is prescribed for the certain function using turns out the best way.. in my opinion from all the lights I've done and from actually trying to use 2K clear it is the worst thing you can put on a headlight... I actually used to try to use it, until I try to start removing it from other people putting it on that'll stop you...lol It might last a little longer but that's not necessarily a good thing because the light starts going bad underneath the clear coat because it clear coat is dead it's just strong I've seen this quite a bit... Bonds too hard to the life as well starts causing spider cracking warping and pitting after a while when mixed with sunlight and weathering.. also in certain vehicles it's too hard it starts causing crowning and pitting from debris impacting freeway mileage... I've literally done over a thousand headlights well over at this point... And have run into this issue a couple times a month trying to remove this stuff.. But like I said to each his own if that's what you like to use I guess go fo it.. I consciously can't use this and run a business.. I mean if you're working on your own vehicle or you don't care to each his own...(actually have a video on this topic if you look through my content) Thanks for watching.

@TheJoepeanut Жыл бұрын

I am a mobile bumper painter of over 20 years for dealerships and do headlights when I have the opportunity and always clearcoat and looks amazing this guys method is is great as well

@theheadlightrestorationpro Жыл бұрын

@@TheJoepeanut awesome... Appreciate the support. got more stuff coming soon.. Hope you subscribe as well.. thank you for watching.

@KlockoFett Жыл бұрын

Does this difference of opinion come down to geography? Like, 2k is gonna suck in AZ, TX, FL, etc but will be awesome in like Mass, NY, WA, etc?

@theheadlightrestorationpro Жыл бұрын

It very well could.. the orange pill problem is very problematic as well as the cure time so many things can happen with the cure time and most have that restoration is performed in a non-controlled environment.. and the need to go over it once it cures it's really problematic you need something to set and forget.. But good thinking it could be better in certain climates..

@kellstat Ай бұрын

Is there a light restoration kit you would recommend? Or what tools and supplies to buy?

@UberLummox 3 ай бұрын

Learned a lot. Thank you!!!

@theheadlightrestorationpro 3 ай бұрын

Glad it was helpful!

@gary-tk9ru 2 ай бұрын

I did my headlights 5 years ago and they are still looking like new, I used a plastic polish, no sanding . This guy is making it more complicated than what it is, just to make more money

@kornshadow097 Ай бұрын

Brand?

@johnnypolex Ай бұрын

Parked in the sun all day?

@robertgarrett2290 3 ай бұрын

Plastic headlamps are a total scam because when they get affected by heavy uv rays it forces you to buy new ones that cost hundreds and hundred of $$$. I’d even go as far to call it a conspiracy. It wasn’t that long ago when lenses were actually glass. I think the change came sometime in the 90’s as my 90 VW had glass lenses. So the big auto companies only offer cheapo plastic to save a buck and later inevitably forcing car owners to buy new oem or aftermarket headlamps. I’ve seen nice later model Porsches with lenses becoming cloudy. I’ve foolishly used many products that only offered temporary relief. Great video!

@theheadlightrestorationpro 3 ай бұрын

👍🏽

@pcno2832 3 ай бұрын

I'm surprised they don't sell aftermarket headlights with a glass outer surface. I'm sure some people would be happy to pay extra for them. The automakers will talk about how plastic saves weight and resists shattering, but plenty of people would rather live with the the extra weight than put up with the maintenance hassle of plastic.

@theheadlightrestorationpro 3 ай бұрын

@pcno2832 some people would like to be shot in the head too but doing that isn't typically offered because most don't .. 😂😂😂 What I mean is you don't really understand the concept of modern-day headlights.. Google TEXTILE STRENGTH/TENSILE STRENGTH and an old clue you in a little bit about why the main reason is that they do it..(polycarbonate is 250 times stronger than the last) Also check out this video.. kzfaq.info/get/bejne/gsl9edVh0tbUXWg.htmlsi=xQ_eFMqSJHK1wzKy

@markjeep9415 5 күн бұрын

I had a go with some 1000 grit followed by 2000 and 4000 came up lovely I need to seal them now thank you

@johnmeadows6506 Ай бұрын

If I were to simply replace the headlight assemblies, would a sealant help keep them clear?

@ChilledSon Жыл бұрын

Quick question, shoudnt the headlight be taken off the car to prevent overspray when using the UV protectant spray? I see you did some taping but overspray goes everywhere as we all know. Is it because it is safe to have that product overspray onto surrounding plastics? What about painted metal? Asking because I'm gonna restore my headlights on an old DD beater and don't wanna remove em. The caring level is at 0 but I need to see where I am going 🤣 Winter driving in Canada. You have a sub. Throw more shade onto all the 'Pros' that don't use UV protectant. Are headlights clearcoated with UV spray at the factory or is the platic UV resistant when new?

@theheadlightrestorationpro Жыл бұрын

Unnecessary to remove the headlights especially with modern vehicles some vehicles can take an hour plus just to remove the headlights and an hour plus just to install them again and let alone the work... As far as overspray there's no overspray significant overspray I tape off an access of about a minimum of 3 in I usually do about 5 in away from the light the overspray of this tip on these cans of the Maguire's headlight spray coating are very fan directional which means at about 6 to 7 in away from the light when you're spraying the fan that contacts the headlight is about 2 in so I didn't give him point you can control how much overspray there is it's a very directional tip so overspray is usually a Max of 2 inches with mine it's usually about a half an inch or an inch but I tape off for 5 in to evade any overspray it's not existent in my day today applications.. and yes the headlights come factory-coated after it's injection and press molded they spray it down with a UV protectant.. they have to because they'll just go bad in a couple months without.. biggest side effect of polycarbonate one of the only.... Check this video out here and there's actually footage of headlights being put together at a factory... Thank you for watching.kzfaq.info/get/bejne/qtRzl7hjz5uukWQ.html

@langdonfairchild1st805 Жыл бұрын

Always use a interface pad between the sanding disc and the velcro pad. Reason is. One it smooths of around any radius on you're light safely so you don't square off the corners. Secondly it reduces heat build up which you don't want at all.

@theheadlightrestorationpro Жыл бұрын

👍🏼

@artyomandreev1890 2 ай бұрын

Great tutorial! I have a question though. Are headlights clearcoated? And if so, dont you burn through the clear with the amount of sanding that you did in this video? Never attempted to restore headlights because im worried i will remove the clear, which would be there to protect the plastic housing.