Easiest Fix to Ride Better - Bike Brake Lever Position For Beginners

Рет қаралды 23,758

Күн бұрын

Do you want to know how to set up your mountain bike brakes and ride safer? Believe it or not, I truly believe that by simply adjusting the position of your brake levers from forcing a 2-finger brake technique to a 1-finger brake technique, you'll be able to improve confidence, comfort and also make you a smoother, safer rider!
The idea for this video first started 10 years ago when I was riding with two guys who are excellent dirt bikers but had never mountain biked before. They both were falling over and losing traction regularly. After watching them I noticed both their brake levers were smashed up against the grips, forcing them to either have a week grip or poor braking. As soon as I slid their brake levers in on the bars, they felt a notable increase in confidence, comfort and control on the bike.
At a trailhead just last week I noticed a father and son with a similar issue and was torn between offering my advice and seeming like a know it all who was interrupting their father/son ride... I hope they see this video and it helps them and others unlock such an easy trick to make mountain biking easier and safer.
In this video Drew is riding a ‪@aribikes‬ La Sal Peak.
#mtbtips #howtorideabike #mountainbike #fezzari #theloamwolf #mtb #enduro #mountainbiking
CHAPTERS
00:00 Introduction
02:00 Why It Matters
04:00 Riding Examples
06:00 Adjusting Brake Levers
08:00 Pro Tip and Closing
Get your Loam Wolf gear here:
store.theloamwolf.com
------------------------------------
FOLLOW US
Website: www.theloamwolf.com/
Instagram: / theloamwolf
Facebook: / theloamwolf

Пікірлер: 53

@bphif3 Жыл бұрын

Looks like my levers are set right. Ready for the next video to help uncover why I suck

@DirtRoadRemedy Жыл бұрын

Thank you! I found this video because I found myself wanting to break with the middle finger since the lever feels so far away from the bar. I never knew that was such an easy adjustment.

@TheLoamWolf Жыл бұрын

That’s awesome to hear and hope it helps!

@PaulMoody Жыл бұрын

Great video - you even included the best brake lever tip (8:30-9:00) tighten just enough to keep lever from moving, but loose enough to rotate in case of a crash. All of my friends had theirs torqued down, and several have bent or broken levers on the lightest of crashes.

@TheLoamWolf Жыл бұрын

With experience comes knowledge...haha or something like that. Glad you caught that tip. it's a big one.

@ryansteiger6960 Жыл бұрын

Great video. I do it exactly the same way: adjust until you can reach with one finger straight 👍

@AUSTIN_RIDES Жыл бұрын

Something you may want to try that I have learned from my moto setup is running your levers inside even further makes you hold the grips more like a door knob this automatically keeps your elbows up and also prevents arm pump from death gripping.

@mtbboy1993 Жыл бұрын

even further inside? really that makes no sense, then finger will ahve to bend to reach that will give fatigue and pain in the finger. Maybe you got confused by the clamp, clamps can have different placement relative to the lever blade. what matters is the lever blade position. everything shown in this vid is right. only thing I would change if it was on my bike is to have flat lever setup, but my bike has long enough reach asnd high enough cockpit for it.

@AUSTIN_RIDES Жыл бұрын

@@mtbboy1993 I understand how clamps can be in different positions and im not saying the video is wrong. You would not be stretching or bending your finger would still be pointed straight in relation to your palm, you are rotating your entire hand.

@drumerboy456sx Жыл бұрын

Makes total sense, especially for cornering on flat surfaces where you want to keep your elbows up/open so that you can lean the bike and still be able to reach the opposite side/lower side of your bars.

@mtbboy1993 Жыл бұрын

@@drumerboy456sx I am not sure what you mean by trcahibg the other side of the bar. But I have no issues running the levers flat, but I ride a Geometron G1 with high cockpit.

@RIDEON909 Жыл бұрын

Great info!Im going to make sure I setup my new bike correctly before I take my first ride out 👍

@TheLoamWolf Жыл бұрын

Congrats on the new bike and hope the tips help! Enjoy

@jmyers6175 Жыл бұрын

Good idea to do a video on this subject. Teaching the basics on every part of the bike. I first started mountain biking I didn't know one finger braking. Time my shifting before a hill or rouph part of a trail and not for the bike to shift under pressure. Also, thanks for the interview with Chris Cocalis about the switchblade. Question..Have you ridden the trails at kokopelli outside fruita Colorado?

@chriskelley2075 Жыл бұрын

Great video! I did this a while back and it made all the difference in my control, I'd rather be Fidgeting Fool!

@StefsMTB Жыл бұрын

Great video! I wish I could send this to my ride group but they would get bent out of shape. LOL

@TheLoamWolf Жыл бұрын

All the more reason! What else are ride groups for than to help and give each other a hard time! Haha

@SoGoMTB Жыл бұрын

Amazing tutorial. I learned a lot!

@TheLoamWolf Жыл бұрын

Thank you and glad to hear it.

@johnparrish336 Жыл бұрын

Great video!!!

@TheLoamWolf Жыл бұрын

Thank you very much. Glad you enjoyed it.

@Christmylife78 6 ай бұрын

This was great! I’m embarrassed that so many of us get this wrong including myself. This should be 101 for shops and on the trails. What about the set up of the shifter levers? There are MisMatch available too… Different ways to approach shifter lever alignment.

@SoGoMTB Жыл бұрын

Thanks!

@TheLoamWolf Жыл бұрын

Thank you so much for the gift, we appreciate it greatly!

@BikeandSkiGeoff Жыл бұрын

I use my phone to measure the angle of my brake levers as well so that the cockpit feels the same no matter which bike in my fleet I'm taking out and/or I can set up a rental/demo bike with the same feel.

@TheLoamWolf Жыл бұрын

Very cool thanks for sharing

@Paulthenutter34 Жыл бұрын

Same, 33 degrees down on every bike...

@timothydubber549 Жыл бұрын

Glad I’m not the only one! 34 degrees here.

@mtbboy1993 Жыл бұрын

Great guide, but one thing you did not mention is how reach and stack height effects the setup, my bike has a long reach and i have a high cockpit, so this allows me to run the brake levers flat and relax my arms, and handle, hand just rests on the grip. Shorter reach= steeper brake lever, loweerr cockpit = steeper brake lever. but when it gets to a certain point it will be uncomfortable. So correct frame size is important.

@RockMumbles Жыл бұрын

One of my first steps setting up my cockpit is to move brake levers in for one-finger braking!

@julioorozco801 Жыл бұрын

Nice video. By any chance do you still have any Victory Circle Guards with the custom Loam Wolf graphics.

@terryl.johnson4336 10 ай бұрын

Thanks

@TheLoamWolf 10 ай бұрын

You’re Welcome

@bigpondonly Жыл бұрын

Great video!!! What about the angle of the lever? Thanks!

@mtbboy1993 Жыл бұрын

I have commented on this. ''Great guide, but one thing you did not mention is how reach and stack height effects the setup, my bike has a long reach and i have a high cockpit, so this allows me to run the brake levers flat and relax my arms, and handle, hand just rests on the grip. Shorter reach= steeper brake lever, loweerr cockpit = steeper brake lever. but when it gets to a certain point it will be uncomfortable. So correct frame size is important.'' So you if you have short reach you just have to test see what works for you.

@liwx Жыл бұрын

can you please make a video of how handlebar pitch / roll would affect the steering quality ?

@TheLoamWolf Жыл бұрын

Yeah we will work on that!

@i_like_toytles Жыл бұрын

A long time ago when I was less particular and less knowledged, I borrowed a friend's full-sus for a trip to my first bike park. I had the brakes set up this way and used two fingers the whole time. The two fingers on my left hand were rendered useless for about three months after that one day of riding because of the stress I put on those tendons. I am a guitarist and couldn't play for a couple of months. It sucked. One year later I returned to the park with my own bike and the right one-finger setup and had a great time. So, this really does matter if you are trying to do any serious riding.

@TheLoamWolf Жыл бұрын

Thanks for sharing and glad you're hands are back to normal

@johnwilkins3995 11 ай бұрын

I just noticed and want to adjust this on my new Roscoe. Issue is there’s like a brace that wraps around the gear shifter sleeve so I have to also move the shifter inward. Any advice?

@TheLoamWolf 11 ай бұрын

Take the grip off slide the brake and shifter off and swap the orientation so the brake is inside the shifter and you can move it freely.

@captnhuffy Жыл бұрын

yep. and the angle: straight wrists while riding

@mtbboy1993 Жыл бұрын

What I see a lot is kids riding with all in one mechanical brake & shifter, so you can't get that to work ergonomically. Another thing I see even more iss shiffter and brake not really being compatible with each other, so you can't get the position right, so if you want to be able to shift eassily braking is compromised, if you want to brake, shifting is compromised. basically shifterr and brake need to be ghosted, which is not feasable. this is very common on thhe bikes most of the smaller kids ride. Another issue I see is clamps torqued way too hard, so hard levers will snap, shifters will be destroyed. But I try to fix it for them, but I always prirotise the brake position.

@killgates9890 Жыл бұрын

I like lifting the brake levers, it stops attacking the nerv in the hand and it feels nice...

@zackbone1327 Жыл бұрын

Why do you like enve bars over one ups?

@TheLoamWolf Жыл бұрын

Can’t say we do, we’re just testing them out. We are fans of OneUps carbon EBar that’s for sure!!

@tonym6633 Жыл бұрын

The only issue is reaching the shifter. I have them mounted on one clamp as they do in the video.

@billryan8721 Жыл бұрын

Give your levers a little extra sauce with some grip tape.

@markbuttery2790 Жыл бұрын

Are you supposed to set your brakes sitting on the bike !!!!!! not standing next to it?

@mtbboy1993 Жыл бұрын

For the angle that defenitly would be wise. but on my bike levers are flat, but I have the reach for it.

@LexZolnir Жыл бұрын

Yes on a large group road ride though, a guy had an oval chain ring w/ large Ceramic-Speed pulleys and a gold SRAM eagle MTB chain, this damn thing was hopping an inch off the gears w/ every pedal stroke....i couldn't take it so i dropped him and did so any time he came up near me...on MTB its always people w/ their seat too low and they are all cramped up with their legs never getting to extend to that ideal angle, makes me cry for their knees!