ℹ️ Why your Lightburn camera doesn't seem to be accurate on a diode laser, and how to fix it!

No video

ℹ️ Why your Lightburn camera doesn't seem to be accurate on a diode laser, and how to fix it!

Рет қаралды 3,820

2 ай бұрын

➡️ Click on ...more↙️for the VIDEO MENTIONS and other Links!
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation...
The LaserMATIC 10, 20, 30W & XW are now available for order, or preorder!
These are HIGH demand lasers!
ℹ️ Roly Automation lens profile link:
🔗 lahobbyguy.com...
🆘 Roly Automation Support Facebook Group:
🔗 / rolyofficial
➡️ Into Co2 lasers? Check out the top of the line Co2 & Fiber lasers from Aeon USA! These are very high quality and the fastest available! Plus the support is outstanding!
🔗 lahobbyguy.com...
❓ Need a crash course in Lightburn? This is the playlist for you!
🔗 lahobbyguy.com...
✅ Grab a drink, sit back, and get ready to learn how to use Lightburn!
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutf...
/ lahobbyguy
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/laho...
=======================================
Need to mail me something?
The Louisiana Hobby Guy LLC
4945 Grand Terre Drive
Marrero, LA 70072-6613
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Check me out on Rumble! rumble.com/c/c...
=======================================
➡️ Excellent Laser Supplies from Craft Closet!
craftcloset.co...
Use Coupon Code: HOBBYGUY for 10% off your purchase!
➡️ The workbenches I use from Vevor:
🔗 s.vevor.com/bf...
Adjustable Height, 48" L X 24" W X 40.9" H - 1600 LB Capacity, with Power Outlets & USB power ports. Hardwood Top & Metal Frame & Swivel Casters for only $194.99!
ℹ️ Use Coupon Code: VVPROMO
to get 5% OFF Sitewide in Vevor!
➡️ Laser Fume Extractor/Purifier, no venting to the outdoors, but works well:
🔗 amzn.to/3ybkFuN
Best in class under $1K at $499.
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com...
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com...
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com...
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com...
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic #lightburn #tutorial

Пікірлер: 71

@TheLouisianaHobbyGuy 26 күн бұрын

This video is for a *diode hobby laser!* If you have a *Co2 with an adjustable bed, it doesn't apply to you!*

@GeraldJensen 2 ай бұрын

Thanks Rich! This helped me solve a problem that has been driving me over the edge for months.

@TheLouisianaHobbyGuy 2 ай бұрын

Glad it helped Gerald!

@walonguy111 2 ай бұрын

Great video Rich, very helpful. Thanks for the continued training.

@TheLouisianaHobbyGuy 2 ай бұрын

Awesome! 👍 Thanks for watching!

@PurmanFinlayson 2 ай бұрын

Hey Rich, great info. Really appreciate all the info. you put out. One thing I wish you would do is show those of us who have no clue as to how you are saving and renaming the different thicknesses of product. Thanks so much.

@TheLouisianaHobbyGuy 2 ай бұрын

I showed you in the video!

@urstuckagain 2 ай бұрын

I've found when drawing circles that it's much easier to use shift + control and the circle will draw from the center out. Thanks for the video!

@TheLouisianaHobbyGuy 2 ай бұрын

Awesome! 👍 Thanks for watching!

@sash-v7i Ай бұрын

There is no wrong way,just Another way to do something 😉🥂

@georgechambers3197 Ай бұрын

I didn't say it was the right way I said it was easier for me to draw a circle where I wanted it from the center out and not have to move it into place saving a step.

@sash-v7i Ай бұрын

@@georgechambers3197 🥂

@robertdutton6110 2 ай бұрын

I didn’t realise that you needed to make settings for each and every thickness of material you laser.

@TheLouisianaHobbyGuy 2 ай бұрын

That's the mistake most people make Robert.

@robertdutton6110 2 ай бұрын

I did my test laser on 12mm thick piece and when I Lasered on a 2mm leather keyrings I had to adjust in light burn as it was off.

@bigcountry734 2 ай бұрын

how would I set alignment doing flat stainless bottle openers or the thicker wood bottle openers and wood keychains ( small items)

@TheLouisianaHobbyGuy 2 ай бұрын

It's done by thickness, not material. I stack these 2mm wood squares to the thickness I need: amzn.to/4bCDxlp You could also stack craft paper under the wood to bring it to the thickness you need.

@LouRao 2 ай бұрын

Another good advice 👍. Question, for every material thickness camera needs to be calibrated (Roly Laser)? why would the thickness matter if the alignment is referring to where the laser head is positioned?

@TheLouisianaHobbyGuy 2 ай бұрын

I explained why in the video.

@keithharalson7451 2 ай бұрын

Great tutorial as usual Rich. Will this process work on a CO2 laser(Omtech Polar 350) as well?

@TheLouisianaHobbyGuy 2 ай бұрын

Yes Keith, any fixed camera used by Lightburn.

@bigcountry734 2 ай бұрын

so this is my problem, I don't need to do the lens calibration again just the alignment for different material thickness?

@TheLouisianaHobbyGuy 2 ай бұрын

Yes, the lens calibration is done just once. It gets saved with every alignment.

@richardsandford1607 2 ай бұрын

Thank you!

@TheLouisianaHobbyGuy 2 ай бұрын

You're welcome Richard, Thanks for watching!

@antkn33 Ай бұрын

How did you get the calibration engraved on separate pieces? I thought was that was engraved you weren’t supposed to move it, right?

@TheLouisianaHobbyGuy Ай бұрын

The calibration engraves on all 4 corners.

@BHorst.BHorsty Ай бұрын

I just bought a Lightburn Camera, for 1. Testings its pretty accurate....😮

@TheLouisianaHobbyGuy Ай бұрын

Awesome! 👍 Thanks for watching!

@NealsBumblebeeCrafts 2 ай бұрын

It took me a while to realize this need to create settings for each thickness. The LB doesn't really make the purpose of "material thickness" in the setup window clear. My *current* issue is that I'll run an alignment, then burn boxes in each corner and the top boxes will be spot on but the bottom could be off 1/8 - 1/4". I can't adjust the x/y to correct the "astigmatism" without throwing off the top boxes.

@TheLouisianaHobbyGuy 2 ай бұрын

Did you watch to the end?

@mwinn2009 2 ай бұрын

My issue is all of the sudden when I try to update the overlay even though the small display shows it.

@TheLouisianaHobbyGuy 2 ай бұрын

I don't understand the issue.

@coulterjb22 2 ай бұрын

I wish I could get the same results on my UV galvo for accurate knife engraving. A little off is a long way off.

@TheLouisianaHobbyGuy 2 ай бұрын

I explain why near the end of the video.

@coulterjb22 2 ай бұрын

@@TheLouisianaHobbyGuy Sorry LHG, I didnt mean to hijack your video, My issue is really a lens calibration issue, I should not have commented here. Im frustrated. My system is working well for what i use this laser for but placing artwork on a knife requires a well calibrated lens. My results are distorted making one spot dead on and another .5mm high, or .3mm wide in different areas of my working area. As always, your vids are a great source.

@TheLouisianaHobbyGuy 2 ай бұрын

If you're having hardware issues, contact my partner Patrick. He can likely help, sales@lightsource.pro

@derekcassese9280 2 ай бұрын

So I just did this and it was spot on with the wood. I then swapped out the honeycomb and put in the jig plate and tried to do a business card and it is way off on alignment. Why is this?

@TheLouisianaHobbyGuy 2 ай бұрын

Because you didn't watch to the end!

@derekcassese9280 2 ай бұрын

@@TheLouisianaHobbyGuy Yes. I realized that shortly after I posted that. Thanks for the help..

@Terry_Genereaux 2 ай бұрын

I can't find the file in the files select on the Facebook page

@TheLouisianaHobbyGuy 2 ай бұрын

It's there: facebook.com/groups/rolyofficial/permalink/1349434309017403

@martinmacklin3050 2 ай бұрын

@@TheLouisianaHobbyGuy These links look to be for the LaserMatic 10, is it the same profile then for the MK2?

@TheLouisianaHobbyGuy 2 ай бұрын

Yep, same camera.

@leomachado7676 2 ай бұрын

Hi Rich.I cannot find the file on my Facebook page. I live in Portugal. Would that influence my access to the file. Thank you.

@TheLouisianaHobbyGuy 2 ай бұрын

facebook.com/groups/rolyofficial

@leomachado7676 2 ай бұрын

@@TheLouisianaHobbyGuy Hi Rich. Try as I may I cannot find the file. I looked under files but to no avail. What am I missing?Thanks for your help

@purmanfinlayson2175 2 ай бұрын

Sorry Rich, you did show us. I guess my old age and obvious brain deterioration is showing.

@TheLouisianaHobbyGuy 2 ай бұрын

🤪

@jimbauer6822 2 ай бұрын

I use that something in light burn but the width and height are off right on in some areas and off in others adjust camera settings to get as close as I can and next thing you know it's way off in locations never consistant

@TheLouisianaHobbyGuy 2 ай бұрын

Watch the video to the end Jim.

@jimbauer6822 2 ай бұрын

@@TheLouisianaHobbyGuy i did watch till the end have tried t calibrate my machine but dot have the machine setting in edit have tried gerbl and all the other controllers and get noting but busy and nothing works is scanning offset adjustment in smoothieware the same as machine settings in edit and works the same way your the genus at lightburn thanks

@TheLouisianaHobbyGuy 2 ай бұрын

Well I know nothing about your machine or your settings, and in a KZfaq comment, there's not much I can diagnose. Try posting on my free forums. lahobbyguy.com/bb

@user-vj5kb4gr6v 27 күн бұрын

Thanks for the video. I watched it all the way to the end, but still have a few questions. 1) Your explanation about the material thickness does not make sense to me because whether the material is 1mm thick of 1 foot thick, the surface that is being engraved upon is still the exact same distance form the laser head (and camera) so what is the difference how much material is beneath that surface? You related it to moving a DSLR further away from a subject and "of course" it is out of focus, but that really is not the case here because if I put on a material that is 1cm thicker, then I drop the bed 1cm so the distance from the surface being focused on and the lense has not changed at all. 2) Brilliant to burn the pattern much larger, as you have, but you skipped over the part about how you determined the size. I assume that you just put the 2 blocks at the extreme corners of engraveable areas and then just placed the other two so they form a perfect square with the initial two and then center the 5th one, is that right? Obviously, you would have to measure exactly how big that square is in order to scale the burn area. 3) Lastly, I have set my camera up with the dot method which was a nightmare of an experience and I am not even sure if it is accurate (though I got it to complete so allegedly it is). It sounds like you are saying I did not have to do that at all and could have just picked the lens angle from the dropdown and skipped that whole step, is that right? With my camera it does list it so would I be better to use that preset or leave it alone since I already did the dot method? Thanks again for everything you do. Much appreciated!

@TheLouisianaHobbyGuy 27 күн бұрын

Okay, so: 1) The distance from the *camera* to the material changes since the honeycomb or waste board are both in fixed positions. 2) I just increased the size of the pattern by a % and looked at the preview. 3) Yes, better to use the preset IMO.

@user-vj5kb4gr6v 26 күн бұрын

I much appreciate your reply, but the first point still doesn’t make sense to me. You said that the honeycomb or waste board is in a fixed position, but it isn’t in a fixed position. It moves up and down, so if the material is thicker, then the honeycomb is lower, so the surface is still in the same place. I’m not familiar with other lasers so, based on what you are saying, I’m wondering if with other ones that honeycomb does not move. If that is the case, then what you’re saying makes perfect sense to me.

@TheLouisianaHobbyGuy 26 күн бұрын

Yeah, so on a Co2, you're right, the honeycomb does in fact move and this doesn't apply.

@Jay.C.H 2 ай бұрын

I wish mine did that well on my MK2.

@TheLouisianaHobbyGuy 2 ай бұрын

You just saw it on an Mk2! I guess you didn't watch to the end and missed the most important part...

@Jay.C.H 2 ай бұрын

@@TheLouisianaHobbyGuy I have calibrated my camera on the MK2 for 0, 3, 6, 9, 12 mm wood, it took many tries on each on before I got something close. Never got that close on the first try. I’ll check LB forum to see if I did something wrong, but it is a pretty straight forward.

@TheLouisianaHobbyGuy 2 ай бұрын

The key is getting those crosshairs perfectly aligned on all 4 numbers.

@staceylanglais6416 2 ай бұрын

Can you help a newbie please. Im engraving on glass but the image sometimes comes out mirrored sometimes normal what am i doing wrong? Please help 😊 I know its not camera related as i dont have one haha.

@TheLouisianaHobbyGuy 2 ай бұрын

In the rotary setup window, you can turn on and off the Mirror Output.

@staceylanglais6416 2 ай бұрын

@TheLouisianaHobbyGuy thank you so much for replying. It says its off and the writing is readable from inside the glass but on the outside it is backwards. Should I have mirror on?

@TheLouisianaHobbyGuy 2 ай бұрын

Yes

@staceylanglais6416 2 ай бұрын

@@TheLouisianaHobbyGuy amazing thank you 😊