No One Knows This Can Be Done With a Jigsaw! Hidden Features of Jigsaw

Рет қаралды 5,598,444

Жыл бұрын

Jigsaw is one of the most used hand tools in workshops and homes. That's why in this video we show you the tricks, hacks, tips you need to know about the jigsaw. If you are using a jigsaw and wondering how to use a jigsaw, be sure to watch this jigsaw hacks video. Everyone who does DIY and woodworking has a jigsaw. Few people know the features of this jigsaw! In this video called jigsaw hidden features, we show you the jigsaw's hidden features, tricks, hacks and tips. If you are using a jigsaw, be sure to watch this video.

Пікірлер: 645

@beezerdoodle6140 Жыл бұрын

Love your presentation, no music and no yapping just good demonstration of clever techniques. The "no-no" finger wagging cracks me up.

@only1muppet Жыл бұрын

If you notice when he was using the saw with the blade backwards it was starting to come out. Don’t try that unless you’re wearing safety glasses. Also some saws don’t have a wheel that can be moved. The last board wouldn’t have had the frayed edge if it had a less aggressive tooth blade and slower speed. Jigsaws are more like scroll saws than they are sawzall, they aren’t meant to cut through everything fast as possible.

@n3bux Жыл бұрын

there are different blades for it aswell. downward cutting blades for neat top finish. also copping jigsaw where you use them from under the board. but using a cheap green bosch jigsaw has his limitations

@jamesritchey4597 Жыл бұрын

I agree that a finer toothed blade will do the job. But if you are very paranoid about tearout. The tape and close clearance idea on top of it won't hurt. And yes, the first one is super sketchy. There are easier, less dangerous ways to make that cut.

@Tegelane5 Жыл бұрын

@@n3bux And for that green Bosch'es money you could get noname jigsaw with pendulum switch- much better than that green Bosch which is without it.

@n3bux Жыл бұрын

@@Tegelane5 already banned this channel from my wiew as most of it is full of crap. may be good for beginers, but is a copy -paste of different channels

@womble321 Жыл бұрын

Stupid and dangerous the blade on any tool must never face towards the user.

@Ricciuto1980 Жыл бұрын

Don’t do the first trick. Drill two holes in the corners and use the blade in the intended manner so it doesn’t come flying out and hit you. Safety first

@d0mbee87 11 ай бұрын

engineers at bosch jumping off the top of the building 🤣🤣🤣

@user-ot4ip1wl2j 8 ай бұрын

刃を逆につけるのはイレギュラーな方法ですか？

@Ricciuto1980 8 ай бұрын

@@user-ot4ip1wl2jit’s not the way the tool is designed to be used and the blade could much more easily come loose. You can see in the video that the blade is at an angle when cutting. It’s not worth taking the risk when there’s a better way to do the same thing using the tool as it’s intended to be used

@durango8882 7 ай бұрын

That’s what I’ve always done too 👊🏻

@Julie36285 3 ай бұрын

Very good video, did'nt know the jig saw could be that versatile. Love the visuals and no faff.

@user-pw5by9pi7p 18 күн бұрын

Спасибо. Теперь я начну тренироваться, чтобы уметь так же делать пальцем из стороны в сторону. Не знал, что пальцем можно так делать. Круто! 👍

@janospajer5123 Жыл бұрын

Köszönöm szépen!! Csodálatos!!

@Thor-E598 Жыл бұрын

Gracias por compartir ,tus conocimientos,y FELICES FIESTAS ...!!!!

@larchman4327 Жыл бұрын

I have an old one I got from dad's tools I only use it to cut out large holes in plywood for plumbing and stuff. Use skill saw for everything else shown here. I also use a high quality 7" folding manual saw. I like the tape trick going to try it sometime.

@kevandgizmo917 Жыл бұрын

My mind has just been blown completely. Great video

@francoismouton8338 Жыл бұрын

super..merci pour tout ces conseils

@stephenharvey5932 Жыл бұрын

I never gave that a thought. Great idea thanks.

@Erniethebear Ай бұрын

And you should never think about it again.

@juanmanuelhernandezromero3835 Жыл бұрын

Te felicito y gracias

@homeandbackyard9599 Жыл бұрын

Thank you for the tips.

@mandlenkosianselmkunene7737 Жыл бұрын

Woooow SUPER NICE!!! THank you so much for sharing your knowledge with us wow!!

@housewirestv 9 ай бұрын

Great video! Nice ideas for mine upcoming projects. Thanks for the tips!

@Jairocast007 Жыл бұрын

Muy chévere su enseñanza 👍👏

@joseantoniomarmolejo3939 Жыл бұрын

Soluciones muy acertadas

@smallscenesh0 Жыл бұрын

The tape trick is also usefull when drilling holes on wood. With the tape placed where the drill comes out. Good presentation!

@Iskelderon Жыл бұрын

Pretty much every situation where something small could cause tearout. And saves you the hassle of mounting a wasteboard piece.

@JRamoscmaia Жыл бұрын

😲😲😲😲😲😲😲😲😲😲😲😲😲

@naohojo3668 Жыл бұрын

Muy bueno!!, Ayyy si lo hubiera visto antes😅

@larrykrise3609 Жыл бұрын

very helpful.thank you.

@2000Rainer 19 күн бұрын

Vielen Dank für deine Arbeit! 👏

@smavkees2584 Жыл бұрын

Briljant. Never thought of indeed. THANKS!!!!!

@bobbarrett2631 Жыл бұрын

Be extremely careful when using a jigsaw 'backwards', as in the first section. there is a reason for the roller guide. The blades are very brittle so wear good quality safety glasses.

@joequillun7790 Жыл бұрын

The safety police have arrived. Thanks Bob. I'm sure the parents of grade schoolers appreciate it.

@polygonalmasonary Жыл бұрын

@@joequillun7790 There are literally thousands of extremely serious DIY accidents needing A&E treatment each year. The vast majority would have been prevented by 'A Visit From The Safety Police'. Power Tools and sharp hand tools are not toys. Some degree of Safety Education and correct methods of use before using them is not only sensible, it could save your life.

@raywhichway1790 Жыл бұрын

"The Keyboard Warrior has entered the room...."

@VenoXj1 Жыл бұрын

@@joequillun7790 Damn, you are such a badass and on top of that also pretty ignorant and stupid.

@diymaster101 Жыл бұрын

@@joequillun7790 u will delete this comment right after u come back from the hospital with ur eye taken out 😂😂

@dedoucap7531 10 ай бұрын

super top 👍, on apprend beaucoup de choses , merci👏

@Erikve Жыл бұрын

Wow, some really goodtips there I was not aware of!

@guitarrainstrumentaldenest513 7 ай бұрын

Me gustó el vídeo,muy útil,una consulta,cómo se llama la app que usa en el cel para medir los ángulos?,se ve muy buena,gracias

@fabricegrard1001 3 ай бұрын

génial ! merci

@user-dq1rp3lh4r Ай бұрын

Ich liebe ihre Videos! Danke sehr!❤

@nezarmahmoud7728 3 ай бұрын

I love this video so much its really useful for me thanks a lot from heart

@randdyrios7436 Жыл бұрын

Tremendos trucos socio....👌

@reginaldojosecaron8308 Жыл бұрын

Show de bola as suas dicas

@thisislilraskal Жыл бұрын

I always learn something from your videos

@soundbox1633 Жыл бұрын

Конец механизму😂😂 Надо использовать сверло по углам)

@kingarthur1776 Жыл бұрын

Been a woodworker for 35 years, never once thought about putting the blade in backwards..lmao..this is a great day!!! Thanx

@Slo-ryde Жыл бұрын

Using a blade backwards could damage your saw if you do not have dual supporting saw rolls. You would have to check with the manufacturer to see if it is safe to do!

@russmartin4189 Жыл бұрын

Excellent tip.

@limbah_kayu_project-MKSR Жыл бұрын

Good job...keep smile at work 🙋

@karlhoy4241 Жыл бұрын

I know a couple of these but the one with the clamp and ruler is a great idea I wish I'd known of years ago

@user-bh4mh4il2t Жыл бұрын

Вопрос к первой части видео-а каким образом было уже проделано отверстие? Почему изначально нельзя было его сразу сделать как отмечено? Зачем городить непонятно что на 4,если на 6 более простое решение такой же пр облемы? Ну и распил под 45 градусов тоже подлежит сомнению- если пилка чуть затупится, или захочется быстрее отпилить- явно результат будет плохим. И почему не показан рез по плоскости- насколько он ровным получился?

@user-rp6mq5pc3f Жыл бұрын

Привет всем! Я бы ещё добавил, что при пилении назад полотно не опирается на ролик, и коромысло возвратно-поступательного механизма получает не рассчётные нагрузки.

@dennybelkin2148 Жыл бұрын

1- у лезвия нет упора. опасно 2- к отпиленому уголок не приложил... на камеру невидно ровно получилось или нет.... лезвие может "гулять" по сторонам 3- как и во втором варианте, да и телефон как транспортир неоченб 4- вариант так себе, но работает! 5- судя по трясущимся рукам при распиле о ровности не может быть и речи. и опять телефон..... 6- как и третий вариант! неочень но работает!

@user-kx8wt3be8b Жыл бұрын

@@dennybelkin2148 точно такойже лобзик. Прямой рез по линейке не получается. Уводит в сторону. Нормальной солидной но главное ровной станиной не могли укомплектовать именитый лобзик.

@TABISURU2019 Жыл бұрын

I also do a lot of DIY crafts, but without realizing it, I was doing the same trick. It's good to be able to share like this. I'm happy that everyone's skills have improved and everyone can enjoy crafting.

@JRamoscmaia Жыл бұрын

😲😲😲😲😲😲😲😲😲😲😲😲😲

@jmc8583 Жыл бұрын

The issue is : when you face such a headache, it's a hint you should use another tool for the work you have to do. The jigsaw is probably the most misused of all eloctroportative tools.

@ziadfawzi Жыл бұрын

Thank you so much.

@jimwalker5412 16 күн бұрын

Well, wello, well, you learn something new every day

@TheOutlawGeneralBacon 8 ай бұрын

This tricks is what years of experience brings..

@fjp3305 Жыл бұрын

Great! I learned a lot in a few minutes

@justjast Ай бұрын

Great tips! Thanks

@user-lg1ks8xq9s Жыл бұрын

Делайте так пальцем, и спина болеть не будет 😁😁😉

@user-nv3wm3xt7l Жыл бұрын

Спасибо, такое всегда пригодится в работе

@ilovehongkong2030 Жыл бұрын

Very useful🎉Thank you

@petesmit33 Жыл бұрын

Some excellent tips thank you!!

@VintageForYou Жыл бұрын

Fantastic.👍

@peckelhaze6934 3 ай бұрын

This is so obvious, yet I never thought of it. Brilliant.

@Mr_Fahrenheit Жыл бұрын

All good to know thanks for uploading

@chrismalchoff7552 Жыл бұрын

The old craftsman saws allowed you to just rotate the blade 90 degrees in any direction by turning a knob on top of the saw.

@kennynickell9883 Жыл бұрын

I still have my 50 y/o Craftsman jig saw with rotating head.. I recently replaced the blade shaft bushing that needed replacing 40 years ago..lol..they really don't make Craftsman type tools anymore..

@roguefate666 Жыл бұрын

I have an old Craftsman from the 1970s (at least) with this feature. I inherited if from my grandfather who was an avid woodworker. It's an incredibly useful tool.

@JT_70 8 ай бұрын

I had one of those old Craftsman’s in the red plastic case for 50+ years. I gave it to my Son-in-Law when I replaced it with a 20v cordless DeWalt.

@JT_70 8 ай бұрын

The only thing that was new to me in the video was the extra long blade. I have not seen one of those. It looked more like a blade for a reciprocating saw.

@MsMagnolia19 Жыл бұрын

Thanks for the video

@olliec1319 Жыл бұрын

Tip number 6: Use a circular saw instead of a jigsaw for cross cuts.

@taradactyl5690 Жыл бұрын

Or a mitre saw/chop saw

@iprobablywontseeyourreply.7193 Жыл бұрын

Not if it’s just a small cut like the first one

@iprobablywontseeyourreply.7193 Жыл бұрын

But the others I think were just used as an example of tips for other uses too

@colinbirks5403 Жыл бұрын

Even aged 82, you can learn new things. Good tips, Thanks.

@Frimouss57 Жыл бұрын

Magnifique !!! 😉👍

@tonylowe6770 16 күн бұрын

Informative. I like tips and stuff for using my tools.

@joesartini2903 Ай бұрын

Brilliant, good to know

@chriscutress1702 Жыл бұрын

Fantastic anti-tear out tricks.

@diyhard666 Жыл бұрын

What a wonderful idea to break your saw. If the saw was intended to work this way the producer would have installed a second support roll on the other side of the blade 🤦 You may use a small router instead.

@tksmart Жыл бұрын

좋은 영상 훌륭한 아이디어 귀하의 유투브가 천만구독이 되기를 기원합니다

@MrCreativeEZ Жыл бұрын

I've been doing this kind of stuff for many years now, but this guy is truly fantastic

@JRamoscmaia Жыл бұрын

😲😲😲😲😲😲😲😲😲😲😲😲😲

@slavastaniUA Жыл бұрын

Great idea.

@cassiacandido9664 Жыл бұрын

Good work 👏👏👏

@HakimAlimi-py3fm 18 күн бұрын

nice, thank you for all information

@anaclaudiadasilva6060 Жыл бұрын

Parabéns Gostei

@nailabc2303 7 ай бұрын

Плохой метод пилить наоборот - можно легко испортить лобзик. На видео видно, как пилка прогибается без упора и дает нагрузку на основание штока зеленого лобзика Bosch , который уже ИЗНАЧАЛЬНО ИМЕЕТ ЛЮФТ - в отличии от профессионального синего Bosch, в котором люфт отсутствует.

@ready-player Жыл бұрын

Sehr schöne Tips👍🙂.

@william8236 Жыл бұрын

Great video, thanks...

@SSvlogs-UK 8 ай бұрын

Excellent demonstration. For cutting Kitchen Laminated Worktop, which jigsaw blade I should use? Should i use Bosch 128BHM? OR T101BR? OR, T308B T308BO T308BF T308BR? Which one is the best for Laminate Kitchen Worktop cutting without Chipping?

@user-pe1zs2pn4n 14 күн бұрын

Very clever and informative lessons. Thank you so much for posting quality content without all of the yapping and music and unnecessary things.

@DIYTechTrends 6 ай бұрын

Amazing my friend 🎉🎉❤

@alexanderandreev9463 Жыл бұрын

OH MY GOD !!!! OH MY GOOOOD!!! he uses a ruler, divine genius!!! God bless you!!!!

@albertyip6363 Жыл бұрын

Wonderful demo. I learned a lot! Thank you!

@JRamoscmaia Жыл бұрын

😲😲😲😲😲😲😲😲😲😲😲😲😲😲

@juemuri5448 Ай бұрын

gut zu wissen,,,danke

@hArPyY40 Жыл бұрын

Great work

@anthonyperry6113 Жыл бұрын

Nice tutorial for the young new carpenters .

@greennich777 Жыл бұрын

아주 좋은 스킬 입니다, 감사합니다 💯💯👍👍👍💢💢💯💯💯💯

@stephandelange1776 Жыл бұрын

I've been woodworking for over 30 years and I've created many weird ways to achieve my needs. But never thought of that! Honestly, this idea is so idiotic that it's brilliant!!! Well, next time on in a tight spot, I'll remember this video. Thanks. Thumbs Up my friend!

@user-fn6oe1fh7d Жыл бұрын

Ysydyfhfjsgjehdvhehhjsgwgdyufhsdyxfufhkfwtattyrwtwtukfykofkgdghghgjfysyrhfjgjhkahdhfygdhdhyuwurjsydbzghjdhugjfykfhfhtusysyfjfkydhjdjdjsndhldjdh

@stephandelange1776 Жыл бұрын

@@user-fn6oe1fh7d Oh, you're probably right! 🤨😒

@Woodworker1947 Жыл бұрын

@@stephandelange1776 I thought much the same actually.... :)

@valmirgeraldosantos1877 Жыл бұрын

Nunca tinha pensado nisso obrigado

@josealvesferreira1683 4 ай бұрын

very, very good, I loved it.

@000001willy Жыл бұрын

These are fantastic tips. I wish I had known them earlier in my DIY career.

@apoberzerk Жыл бұрын

Das mit der Pexiglasscheibe ist eine gute Idee. Ich mache das etwas anders. Ich benutze Sägeblätter, die in die andere Richtung ausreißen. So kann ich z.B. Küchenarbeitsplatten ganz bequem von der "richtigen" Seite schneiden und erspare mir ein "von unten sägen" , oder das wenden der Platte. ;-)

@jeremylawson6648 Жыл бұрын

wonderful

@itzcaseykc Жыл бұрын

Sound examples of cutting techniques. Thanks.

@user-rx2ie4ip1l Ай бұрын

Thanks.

@seektruth1706 Жыл бұрын

Мастер !👍

@rodrigoarredondo796 Жыл бұрын

Buenísimo el vídeo,muy buenos trucos ...me gustaría saber que es lo que le pone a la base de la sierra para cortar esa madera blanca?

@jamescarter4312 Жыл бұрын

It was a thin piece of plexiglass with a slice cut in the Middle where the blade to go up and down which in turn made it a zero clearance for the blade