?... pretty much children at harrd work... where is the happiness...

ScimPeep The kids are better off working and learning the trade with their dad then they would be here in Canada popping uppers, downers or having competitions behind high school dumpsters “who can hold a bong hit longest” It all depends how you look at it mate! No one in Canada would hire these kids for apprenticeship. Yea they don’t have much but they also don’t have much to lose.

@@ScimPeep Go bury your head. Deeper.

@@ScimPeep They contribute to their family, that's happiness.

Kalukohan mo nman Lodz

You called it child labor you maybe right but that is the great way to let them learn when there mind is straight before being useless like most kids in America that get involved in drugs.

Kept us outta trouble :)

Don’t be a pussy about it!

Perfect! And I'm know he is proud of you!

oh, you mean the lack of shop porn calendars by environment. I get you man, I dont know how those guys work.

Тоже так подумал

🤣🤣🤣🤣🤣👍

Ты знаешь, а ведь будет работать. В сервисе конечно красиво, но это не значит, что там профи работают. За эти зарплаты сомневаюсь. Настоящие мастера сами на себя как правило. Не будут они больше половины дяде отдавать. Я поражаюсь трудолюбию и упорству этих людей. Есть видео где они на коленке аккумуляторы, стартер и коленвалы восстанавливают. И это в таких условиях. А если им дать нормальное помещение, инструмент и оборудование? Работают и не ноют. Уважение им.

Зато запчасти у них какие!

Ага, на песке.

Пальцы запресовывать ненадо вставил без усилия и готово👍

Мне кажется это индусы чо угодно починят на коленке

Американська техніка найкраща, все зроблено для людей.

@@Maksim_Bespaleva чо творя пацаны просто на каленках сбор профи

@@user-fp8wo5zw1z почти на всех современных авто пальцы давно уже не прессуют, а просто вставляют и стопорят кольцами.

Very nice sir, where ate you located in the states I'm from Iowa, I hace some experience as a construction equipment mechanic but I'm still pretty green looking to learn more and get more experience

I would first buy them some safety shoes and safety devices

Yes these young men have a chance to learn a trade and make a decent living.

Ja god praise child labour … do some of you listen to yourself once in a while ???

@@drkstd1 Before getting alarmed, you have to understand the context of the country, Pakistan. The vast majority of businesses are usually family-based, in this video the children and nephews and uncles participate, all from the same family, to give you an idea that the average salaries in Pakistan are usually 175 euros per month, and a Work like rebuilding an excavator engine in Europe or the United States usually costs thousands of dollars. Because children work, to learn the trade from parents, and if I am aware that there is child exploitation in Pakistan, but the family in Pakistan is another world.

That is correct, today its all in house video games. China does most everything for the USA and other 1First world countrys just to say the facts

Ага, особенно если перед этим двигу водой помыть, а потом в песок бросить. Зато народ в восторге, как это так, двигатель та перебрать

🤣

@@dmitriyf.9389 то что вкладыши на сухую собрали никого не волнует

@@MrVovanli это такие мелочи 😂😂😂

@@dmitriyf.9389 a

That what the youth of today needs

@@Teddy_Bass they need a reality check, but unfortunately the reality is that the developed world is... Well... Developed. Too many people are too quick to jump into an office job and expect the world to continue ticking over without considering who actually keeps it ticking over.

@@DeltaCodex Here in the UK none of the youth are replacing the mechanics thar are reaching retiring age.

@@Teddy_Bass no wonder man, the pays shit and you have to deal with a reasonable level of bullshit. Where in the UK are you cos here in Scotland, all the grey beards are gone or going. 95%+ of mechanics where I live are in their 20s to 40s.

@@DeltaCodex I’m Deep South. There is enough work for people to go private and make a small fortune. Also all the old school repairers are on their way out, there was a guy that used to repair starter motors. He got Covid and can no longer do the job. There is now no one that can repair them. Now have to buy new.

Ok O Mollo Nonppppoo ok

Doing this kinda work in the states would cost more than the excavator itself 😂

there’s no mechanics in the states those are part changers they have state of the art tools and still cant fix diesel trucks

@@xvaa you do understand the people in this video are doing exactly just that "changing parts". Actual techs in the states perform these type of jobs everyday.

@@innes887 yeah, but with a whole lot less bitching and prima donna moaning about how they should be paid more.

Притирка не всегда требуется, мы по факту проверяем прилегание клапана к седлу и этого достаточно. Если при дефектовке седла визуально не нравятся-на помойку.

@@user-kg6wg7jj1l возможно клапана уже притерты, на них накернены точки указывающий порядковый номер.

Да и про хон на цилиндрах тоже они не слышали... Индусы, что от них взять...

@@COUBVIDEO-kb7lo так у них гильза-поршень, хон там есть.

@@user-kg6wg7jj1l где там хон, там зеркало)

I wouldn't use that engine lol

what about all the plastics and cardboard, and.... they throw away....

@@knight-ot3ji They obviously been doing it successfully for years. Not their first rodeo. You would be stuck with a bad engine out there

Like ww2 mechanics on the battlefield

Quality parts assembled with experience and care

@@madeofscars9355 ?? Did you not watch the video or something? They used grease on every liner they put in the block.

You mean quality low and price high.

Hahaha, so true.

@@madeofscars9355 take another look 3:30

🤣🤣🤣🤣🤣

no one care, look at you environmentalist

@@soundcode0246 So what point are you trying to make?

Hey man its a different world over there. People just don't care and they don't mind all the trash build up.

@@acow9966 I know that too .... please check my later posts in which I owe the mechanics my greatest respect. I think the "developed world" should send some compliance-bureaucrats over there. They should take a good look at what 80% of the world population might think about how high we shall climb the "Western Maslow-pyramid" while forgetting about all manual skills. ;-)

i get it, but look how barren that land is.

Now this is the beginning of a rational discussion .

I think what may appear as work ethic is actually just putting food on the table. If the truth were know, some of those kids may be the only income for the family. they know if they don't get at it, there are 37 others waiting to take their place.

@carlokrenzelak it wasn't as clear-cut as you make it out to be. while industrialization has brought many problems with it, it's simply not fair to blame their ancestors for seeking to utilize the most productive methods and tools of their time

Just depends on how you were raised my family has been doing stuff like this here in the states for over 85 years plus this rebuild was far from correct nothing was machined or measured just new parts thrown together

@carlokrenzelak it's because of the exploitation by the colonial masters

да и поршня там недалекр,за углом отливают.из старых сковородок.

@@night_warrior_svetovoy_god да нет поршня судя по всему оригинальные.... Такое сам не отольешь......

😂

он и по совместительству камаз и тойота

Это конвеер

Amen to that! but it's not! this world is in trouble!! well in America at least!

Children? Lol 😂

flash b

They learned to work withl what is available. I admire their work and ingenuity.

@@calvinwhelan6206 na

@@calvinwhelan6206 ffp

Ага, так и будут продолжать собирать на открытом воздухе.

Да здравствует детский труд, да?

@@user-iv3zw2sl6c Я думаю их насильно там никто не заставляет работать! Скорее дети зарабатывают себе на хлеб. Либо помогают родственникам! Лучше уж такое детство, чем сидеть в тик токе и становиться овощем деградированным!

Не заставояют? Вы в какой реальности существуете? Не поработает - умрет. Такую дичь пишете, что мне за Вас стыдно.

24k @ Cat, probly be 4 months, plus plus, or $79.99 parts and labour from these guys ! Have it in same day and delivered by dinner ! lol

10 mile warranty 😂😂😂😂😂

@@ghafurable 10 is impressive! Id have guessed it to be the standard... 5 feet or 5 seconds, whichever comes first! With a bonus of.. it breaks in half, you get to keep BOTH pieces! :P

Эту прокладку в соседней мастерской ножницами на коленке вырезали)

lines. Cool how the big guy does the important stuff and his close helper torqued the rods. Not just whoever.

I agree. It probably isn't as good as new per se, maybe a little oil leak or consumption here and there. But it's back in service

@@KT111 Maybe but when they get done the engine is like new.

Maybe they’ve rebuilt many but I can bet that many have had major failure after they’ve touched it. Reused rod bolts not properly torqued and not to mention the amount of dirt and contaminants in the bearings being installed outside lol. Done yes in service quick yes but properly no and longevity I doubt.

@@KT111 This engine got new pistons, rings and sleeves. That's not even an inframe, and it wasn't even assembled correctly. Owner-operator truck drivers, small farmers, and the like do full inframe rebuilds outside, in the yard or driveway all the time in the US, and it's done without removing the engine. If you knew anything about Americans, you would know there is a large swath of rural America, full of people who get it done on the daily, in conditions similar to those in this video. And unlike those in this video, some Americans are doing this work outside in freezing temperatures as well. Those 3000 series cats, the engine in this video, are some of the most reliable, simple, and easy to work on engines made in the heavy duty category. This one will run for a while, and with labor cost at pennies per day, that works fine in their local economy. As an aside, the camshaft in this engine is going to fail next, if the rod cap bolts don't loosen up first.

Just imagine if they could teach this concept today; keep ya toes out of the way and pay attention....

У них каждый день - битва за жизнь

The term "backyard mechanic" doesn't exist in this country 😂😂😂

@@benkrauz725 the majority of the country aspires to be backyard.

@@travissmith2211 😂😂😂

No its called field mechanic RESPECT ....you guys in CAT are bound to complain ....

At the end it will work again, but a big mess for the environment. Could do so much better

Agree.

@@andreasrinnert9137 The environment doesn't matter too much. In the first world is not much better, if you dig.

@@andreasrinnert9137 As per their resources they did well job, They haven't proper crane to life the engine it was very risky job.

Did they obey headbolt torque sequence?

I would also want one of these young guys.The one young man in the video with the lighter hair and no sandals on at all. That young man works his ass off. I hope he's being compensated I'm sure he's not but I hope he's making more than the rest of them.

Your shop is into child labour? 22:30 These kids belong in school.

@@ErikS- Pay for their education then. They're in a third world country where their friends may be close to starving with no future in sight. I might add this is their education.

@@ErikS- true yes, but like @James Keeler said, the world is not equal, if i had my means, would love to have them all further educated and have them showcase their unique skills allover the world.

@@ErikS- I've went thru mechanical engineering school at a state college in USA. I'd trade those 4-5 years in school for actual work experience any day. IMO most engineers spend too much time making computer models, writing codes , messing with spreadsheets. We need people with more hands-on. You wonder why USA doesn't make much of anything anymore. It's all about printing petrdollars and importing.

Век хиви, век учись

😂😂😂👍👍👍

А ведь поставят и Он Поедет работать будет!!! Кстати я смотрел как в Пакистане раму грузовика удлиняют и пару колесную вместо одинарной "впиливают"! И Оно Едет!!! 😁😁🤣🤣😎😎

А некоторые и в боксе со стендом и специнструментом хрен собрать смогут....

С песочком притрётся)))

У этих красавцев ремонт делают каждые пол года!!!!!!!

@@igorartemov2554 А потом они едут в Канаду, их нанимают в авторемонт, работают быстро, но качество в два раза хуже. Вы ничем не замените образование и свою промышленность, так и будут страной третьего мира, пока своё не сделают.

Field strip and rebuld. MEanwhile techs at CAT headquarters are watching while downing valium with shots of Wild Turkey

Its their choice to be behind europe.

@@sajuente8235 *THINK* about what you wrote

@@JoaoVitor-ub2mm * wrote. Not writted

@@sajuente8235 Well Europe is cool!!! Use a vehicle for a couple of years.. as soon as a little damage emerges throw it away because 1) part costs are out of the roof, 2) mechanics with next to no experience charge you an arm and a leg 3) if you run a big company you can harvest big money from EU grants to start with a newer machine. There may be others but i am just mentioning a few.

а сколько там придорожной пыли... и если я не ошибся колено и вкладыши не меняли, но совершенно точно крышки шатунов перепутали

Maybe… you would be surprised the things people do to fix these engines, much worse then what ur seeing here! These guys actually used a torque wrench

All nice but only last a few months then junk

@@endyrodriguez8368 like you know

Они потом в коробке от прокладок ГБЦ жить еще 3 года будут!

Последовательность затяжки болтов ГБЦ? Нет, не слышали. Динамометрический ключ раздобыли где-то, раньше я у них такого не видел. А усатый в белом халате у них та за главного, похоже. Важный такой.)

Замена поршневой - это еще не кап ремонт. Неизвестно в каком состоянии остальные узлы)

@@AHK ахаххахаха. Видишь, кто работает у того и жилье есть, не то как у нас, даже на хату не заработать.

Так тепло ж

I'm just asking, doesn't the Tighten connecting rod also use a torque wrench? Or can it be used or not?

@@enggahalingga3416 im not exactly sure what you mean ?? You will know when they are using a torque wrench . When they are tightening something and if you hear a click while they are tightening it then you know they are using a Torque Wrench.

Yeah I bet the tool truck just dropped that off from being calibrated

they may have a torque wrench but are they torqueing it correctly lol

@@dre5973 No...

Halo saudara, mesin ini memang sangat tangguh 💪

É muito interessante seu trabalho

зато опыт у них и глаз ватерпас!

а смысл в ней, там 200рук, плюс трещоткой не так чувствуешь затяжку как обычным ключом,

Well that’s because the torque spec for cat is German spec, goodentight

Agreed. Scary that the job is being done right down in the dirt. Hope that it gets the job 👍 +1 much respect to these mechanics.

@@stevenanderson3386 🤣🤣🤣🤣🤣🤣🤣🤣 nearly spit my water

@Bob Cobb: For a good half year. But that is a very strong 6 months!!!

Brother this wil runl for 4 years easy in pakistan every engine is fixed like this in open

But did you use water to clean and engine?

@@Rocket..Dr.. no, brake cleaner, and lots of it😂

@@Rocket..Dr.. Heh - more often than not it was a bunch of diesel soaked rags.

@@14karatyt indeed.

Reminds me of all the D8 engines we overhauled in field like that ,wind storms and dust shit blowing every where quick hit with wash down gun with petrol and air dry and shut it up before it happens again,we never replaced a single Conrod bolt in any or head bolts ,the last 8k motor rebuilt 10years ago is still running strong for its new owners ,the 3408 rebuilt in chassis and in similar fashion is just coming up to2000hrs

Ага, точно так. Только тут мотор для ремонта приспособлен с завода: комплект гильза-поршень.

@@user-vi7nt1ou2f а чего толку то? С гильзами тоже всякой любви хватает. После установки плиты надо еще проверить выступание гильз над плоскостью и потом либо подбирать ремонтные нужной высоты, либо срезать торец гильзы по микронам очень интересной, редкой и дорогой вундервафлей. Счастье если этот мотор в первый же рабочий день не выдует прокладку, да и вообще хотя бы пол года отработает

водка где?

@@gortransmbu349 так они же гильзы заподлицо срезали наждаком каким-то.или я видос перепутал

@@night_warrior_svetovoy_god Они мусульмане, водку не пьют. Но косяк забористой индийской шмали выкурить запросто.

You could always go back

Cc d

Ма хахахахм

They have done in one day 😂

О, диванные инженеры по ТБ подъехали в комментарии....

These kid's from Pakistan

As crianças que passam fome no Brasil que você não vê estão ralando igualzinho. É só entrar num canavial, numa olaria, em vários lugares que crianças têm a opção de trabalhar ou passar fome.

That surprised me the most.

Would you let these guys work on your own engine in the way they show here?! I guess not…

Это похрже пакистанцы

@@ruslogovard8327 один хрен

Ну динамо у них то есть.

Well said

Well said. I agree. It would be interesting to do a comparison between a western standard vs. their engine. I suspect we in the west might be surprised how serviceable this engine lasts.

An interesting thought here. I suspect the the mfg. CAT has designed this equipment to a wide variance of tolerances. knowing well the equipment is used world wide, including 3rd world areas.

Yessir , there was a time in the West when engines got rebuilt and worked on in fields, barnyards, forests, side of the road , wherever. A well equipped, out of the weather shop sure is nice if you got one.

Shocking to see how clean things stay.

Bet you it runs better than the one you built.

@@PatricioGarcia1973 Done, where do ya left Bob Sponge?

@@PatricioGarcia1973 lmfao it wont. those bolts arent close to being tight enough + they literally only placed the pistons. even the nuts/bolts are old ones wich is a big mistake. not to mention its built in that fucking sandstorm XD.

@@karppa8657 contrary to beliefs, engines are actually really durable, a simple wash with a hose to get all that shit out is fine. You just need to displace the water with a couple oil changes, and a little dirt won’t hurt this beast

@@DiscoMiata noop have you seen what dirt does to a white metal bearing ? or a cam or crank journal ? Engines are build new in dust proof rooms for a reason

Aaaaand they just tip oil on the ground and in the streams … I can’t think of a better place for my big end bearings then in the dirt …

@@Mrypants31 still works

@@84jamesp yep, I’m sure you will be happy to have them rebuild your Daihatsu charade …. I’m mean why take it to a professional ….

as a former DOD Army civilian this is all I saw daily in the shops with the natural Royal talent of Afghan Iraqi and Kuwaiti people refurbishing and restoring what they had on hand to get the job done... 💕

@@Mrypants31 believe it or not this is considered the professional in this part of the world. I spent 4 years working in this region and witnessed some outlandish shit but when have very limited resources and options you make do with what you have to get the job done.