Thanks man!🤙 Good to know! I’ll have to check that out. I hate seeing the mounting plate still there.

Nice! That would be cool to try.

Thanks man!🤙 that’s a trailer video for the one that premieres tomorrow at 5:30

Yup!🤙

Nice!🤙 thanks man! You’re welcome!

I have see the Gerber Design Solutions assist Kit. I would have bought that one eventually. However, JC Customs sent this one to me for free.😁

Thanks man!🤙 I love mine and it makes my truck feel that much more up to date.

It definitely is! Oh for sure! Tailgates are hard to come by now.

theft of these gates have been going on for decades. Your talking $500+ used

Could you elaborate on this or post a link? Not familiar

@@Aidencmz Just Google ‘tailgate lock’ several will come up. It’s the kind that wraps around the lift out end of the tailgate hinge to stop it being lifted out by thieves. Looks a bit like a padlock. Available online or in some parts stores, depending on where you live.

@@Aidencmz wym

You’ll love it!

The assist doesn’t support the tailgate. The cables on either side of the tailgate still do that. I’ve had it installed on my truck since early summer with no issues.👌

@@TheMinuteMasters good point. I'll definitely get this.

​@@TheMinuteMasters off topic. Do you know the torque specs of 2wd driveshaft to rear axle? Haynes says 90-110 ft lbs but I find it hard to believe its that tight. I found lots of forums saying hand tight plus a little more or 26 ft lbs. Concensus seems to be haynes had a typo.

@@aber1711 The four bolts that secure the drive shaft to the axle pinion, I tightened to 90 Ft lbs per Haynes manual. 26 ft lbs seems very light.

I knew you would appreciate that Austin! 🤙 Best multi tool I’ve owned and I always take it to work.

Dude! It’s a game changer!

You’re welcome! 🤙 KZfaq ranks videos that I upload based on previous videos. This one’s ranked number one out of 10.👌

Thanks Jon!🤙 I appreciate it. I’ve been a long time watcher of your channel. By the way, you live in the next county over from you.

Ah! That’s a good one. Well if I do any top end work, I’ll be sure to film it.

@@TheMinuteMasters that would be awesome plz and thank you lol

Thanks man!🤙 I appreciate it. Nice! Very similar to my truck aside from manual transmission.

Too good not to buy right!👌

@@TheMinuteMasters no kidding!

It’s a soft rolling tonneau by Truxedo. I did a video on it a while back.

Thanks man!🤙 $45 was the bare (no powder coat) kit. This video sold enough of these for his supply to run out. His new. Supplier for the assist was more expensive. He messaged me about it because he was concerned.

Thanks man! Hahahahaha!

Thanks man!

Ah! Yes, the end latches are probably bad.

Mine got quite a bit better after I hit everything with pb blaster and worked it. Worth a shot anyway.

That’s cool! Do you know who made that kit?

Probably. Definitely worth investigating

I have been running mine on an OG tailgate, for a good while before releasing the kit. That’s what these shocks are designed to do.

Thanks man!🤙 This is an OE tailgate from the junkyard. So this is a heavy one.

Do you have the assist mechanism installed in the correct orientation? Otherwise, I’m not sure what is causing that.

Not really.

Yes, apparently he sold out of his original supply and the supplier is out too. He just switch suppliers this morning and they were more expensive.

One is definitely enough. I don’t think it’s a universal side. I think it only fits the side I installed it on.

@@TheMinuteMasters Took your word for it and ordered one. Just got mine in the mail. One of the mounts (top mount) was not powder coated and looks like they went up another ten dollars to 85 for the powder coating. Paid 75 (before they went up in price) for this to be power coated and only get half of it powder coated. Good product yet it sells elsewhere for less, now you might get it from china paying that low. Just sn info post on whet I got from them....oh and I got no sticker! :( (lol joking bout the sticker though ya no sticker) So to recap - $75.00, half powder coated, and ....no sticker :) ...Oh and they went up to $85.00 now.

Good question! I don’t know. If the tailgate is similar are there mounting holes are in the same locations, I don’t see why not.

Des Moines 🤙

I haven’t noticed any rattling.

Link in the description!🤙

Not sure but a few people have ordered them who have broncos. They are going to let me know.

@@TheMinuteMasters I HOPE IT WORKS, BUT I DONT THINK IT WILL

@@TheMinuteMasters so did it work on their broncos??

@@iHeartOiSkanks I haven’t heard yet.

I’m running 31” tires on 15” steel wheels now. My Method wheels are 17” and definitely wouldn’t take a stock tire.

@@TheMinuteMasters good for you , it’s really hard here in saudi arabia to find a replacement part, it cost me about 350 dollars for each shipment 😀

@@zeyad.alkhaldi2837 Wow! That’s a lot!

@@TheMinuteMasters unfortunately

Good question. I don’t know for sure. Might be worth testing.

Yes they have one for obs Broncos, as to the difference between the f150 ones and Broncos i can not say

@@Giantass1 Cool thank you

​@Giantass1 Don't see any Bronco ones on the website...

I just emailed the site regarding the one linked, and he replied saying he is positive it will NOT work, but is working on one for OBS Broncos. Really want one.

I doubt a 95 1500/Silverado had this.

🤣🤣🤣🤣